Park Vendor Credit Memo FV65

Dear Experts,
Below is the requirement which I have for T.code FV65.
In Document header level the field Spl GL indicator not to be displayed.
.       At line item level, only the foll fields to be displayed in the mentioned order:
      PO no, amount, Dr/Cr indicator, G/L account code, G/L account short text, assignment, text, long text, cost center, WBS element, profit center.
Can we change the sequence of the fields in line item level FV65.
Please let me know the exact configuration or procedure which I need to follow.
Thanks in Advance!!!!
Regards,
Juned.

Dear Srinivas,
Thanks for your reply.
I have tried the 2nd option of clicking on configuration tab, Administrator and make the fields invisible, Activate and save. For the time being it happens but when I go out of that T.code FV65 and again enter into it, the same screen pops up, means the changes are not affected. I can see the normal screen as the previous one.
Can you plz elaborate more on this, or is there any other option through SPRO.
And I have one more requirement that, the fields which are Visible, the client wants to change the sequence of it. For reference you can see my Initial Question.
Please let me know asap it's urgent..
Thanks a ton!!!
Regards,
Juned

Similar Messages

  • How to post parked vendor credit memo after clearing that invoice

    Hai
    I had an issue where the user is trying to post the parked credit memo and he is getting the error. I had investigated that and found there for that vendor already Invoice amount already paid. After making the payment to vendor with respect to Invoice is it possible to post the parked credit memo for that vendor.In this case the vendor acount balance is zero. Kindly let me know how to post that parked credit memo to that vendor. Is it possible or not if its so how?
    I appreciate the early response.
    Akash Narayana

    Hai Ashok
    The vendor  parked credit memo has posted with referece to PO. And that invoice has been cleared. Currently the Vendor is sitting with the zero balance. Now when the user want to post the parked vedor credit memo it is not allowing.
    Kindly anyone can help. Its Urgent.
    Regards,
    Akash Narayana

  • BAPI to park Debit Note (Vendor credit memo) Doc Type: 'KG'

    Hi All,
    A friend of mine desperately needs to know any BAPI for parking Debit Note (Doc.type : KG Vendor credit memo)... Please let me know if you know about any BAPI / Funcation module to do it and a little chunk of sample code will surely help me a lot....
    Thanks in Advance,
    Regards,

    Hi Savitha,
    Well, we have experiemented with this BAPI "BAPI_INCOMINGINVOICE_PARK" earlier, but we found out that it dose not work properly for Service Orders; also it dose not seem to post proper debit note. Anyways, we have used another BAPI "BAPI_ACC_GL_POSTING_POST", it worked but it posts the debit note (Vendor Credit Memo) but we only want to park the debit note and let the user review it and then the user can post it manually or so afterwards...
    Regards,
    Athar

  • AP-Credit Memo-Clear Vendor/Credit Memo

    Hi all, I am facing Problem during Vendor Credit memo, Clear it (F-44), and Manual Check using F-58
    Can I have different Due date For Vendor Credit memo , as I can see we have different Payment terms in Master data but whenever I post it gives the Due date as Immediate but if I see Open item report it says not Due and shows the Payment terms and the net due dates. Is this Normal?
    I would like to clear the credit memo using the F-44 with reference to another open line item but system says Difference is too large for clearing.
    The third thing I am trying to issue manual check I gave details, as per "J03_AP_CreditMemo_BPP_EN_US", when I hit Process open Items "system is not allowing to post document getting error "Select a valid function"".
    Any Ideas How to deal with the above 3 situations?
    Sandhya.

    Hi,
    To answer few queries,
    Data can be entered in the field for the terms of payment key in various ways as you enter a business transaction:
    In most business transactions, the system defaults the key specified in the master record of the customer/vendor in question.
    In some transactions (for example, credit memos), however, the system does not default the key from the master record. Despite this, you can use the key from the customer/vendor master record by entering "*" in the field.
    Regardless of whether or not a key is defaulted from the master record, you can manually enter a key during document entry at:
    item level in sales orders header level in purchase orders and invoices
    F-44--clearing problem
    If the amount of open item is not equal to clearing amount you enter and the difference is not with in the tolerance limit you specify in the configuration, you will face this error. If the whole amount of open item need not be cleared, then try partial payment/residual payment  options.
    The third situation I am not clear.
    Thanks
    Aravind

  • Cancel Vendor Credit Memo - Reg.

    Dear Experts,
    We have posted vendor credit memo through MIRO. The details are as,
    T-Code : MIRO
    Transaction : Credit Memo
    Reference : PO
    Qty : 0.232 MT
    Amount : INR 50000/-
    Tax amount : 0/-(ZERO)
    Document Date : 16.11.09
    Posting Date : 17.02.2010
    Now, we are trying to cancel this vendor credit memo in MR8M with following details,
    Case : 1
    Invoice Document No.:XXX
    Fiscal Year : 2009
    Reversal Reason : 01(Reversal in current period)
    Posting Date : 17.02.10
    *Error displayed : Allowed Posting Periods:  01 2010/12 2009/ 12 2009 for company code 100 and date 17.02.2010*
    Case : 2
    Invoice Document No.:XXX
    Fiscal Year : 2009
    Reversal Reason : 01(Reversal in current period)
    Posting Date : 31.03.2010
    Error displayed : Reversal Reason 01 only permits posting date 17.02.2010
    Case : 3
    Invoice Document No.:XXX
    Fiscal Year : 2009
    Reversal Reason : 02(Reversal in closed period)
    Posting Date : 31.03.2010
    Error displayed : M8 534 Balance not Zero: 4,487.00 - debits : 54,487.00 Credits : 50,000.00
    Case : 4
    Invoice Document No.:XXX
    Fiscal Year : 2009
    Reversal Reason : 02(Reversal in closed period)
    Posting Date : 17.02.2010
    *Error displayed : Allowed Posting Periods:  01 2010/12 2009/ 12 2009 for company code 100 and date 17.02.2010
    Kindly suggest me where am going wrong and how to cancel this vendor credit memo. Thanks in advance.
    Regards,
    Kumar

    In MIRO, just do invoice for reversing the credit memo and make sure correct periods are used.

  • Link vendor credit memo to purchase order.

    Dear All,
    I am posting one Vendor credit memo in (MIRO) with reference to Purchase Order but i am unavle to get the track of Purchse order from FI document and In PO also.
    I checked relation ship Browser from FI document
    And In Po history also i checked.
    Please give some input on this.
    Thanks,
    Sekhar

    Dear All,
    Please give input how to track credit mmo aginst a particular PO.
    I posted MIRO (credit Memo) referring to a PO but after posting iam unable to track this one.
    Thanks,
    Sekhar.

  • Assignment field being automatically populated in Vendor Credit Memo

    Dears,
    While posting Vendor Credit Memo with Reference Invoice (field Inv.Ref under Payment tab) the Assignment field (field Assign. under Details tab) is being automatically populated with assignment value from the referenced invoice.
    Is there a way to disable automatic Assignment field population?
    Thanks in advance,
    Robert

    Dears,
    No sorting keys exist for GL Master Vendor reconciliation account and still assignment is being copied (Data was copied
    Message no. F5343)
    Substitution is not an option as it's being done when posting, and not at the moment of invoice creation.
    Thank you for any ideas.
    Best regards,
    Robert

  • Printing of Vendor Credit Memo - Urgent

    Hi Experts,
    I want to issue a print output of Vendor Credit Memo to vendor.  Could I get the configuration steps please.
    regards,
    Mallik

    If you are talking from FI Credit memo, pls do configure the following : Under AR/AP in FI.
    Define Correspondence Types
    Create Report Variants for Correspondence
    Assign Programs for Correspondence Types
    And use T codes Fb12 and F.61 or F.62 as per your requirement.
    Pls check whether the available standards applicable for your purpose.
    regards
    S

  • WHT report S_P00_07000134 missing vendor credit memos

    Dear All,
    Report S_P00_07000134 is missing to show vendor credit memos having doc type KG, I have checked config in Define output types, vednor cr memos is already active ,also tried with variety of input selection parameters but not getting these documents, can someone pls advise the reason behind it, or is there anything missing ?
    Thanks in Advance.
    Nilesh

    Hi,
    Please find the below link it will help full for you............
    No records were selected - S_P00_07000134
    Naresh

  • Dunning for Vendor Credit Memo

    Dear Expert,
    I have 5 open due invoices in vendor account of euro 10000 and now i have posted credit memo which is not relating to any of the invoices for value of euro1000.Now i want to run dunning only for credit memo (as this is seperate item receivable from vendor).System is picking up all line items in dunning run and saying that dunning not possible because balance is -9000 (payable). How can i execute dunning only for vendor credit memo which is not related to invoices and which is amount due to receive by us from vendor. And if i select only credit memo in parameters than system is assigning dunning level 0 to credit memo and not executing dunning run.appreciate quick help. Thanks...

    Hi Parag,
    Dunning should be done only for vendor and customer total outstanding balance
    as per below screen invoice  is of Rs.19000/- and credit memo of Rs.20000/-
    amount recovered from vendor is Rs.1000/- along with dunning changes  here
    in the below example i had  taken Rs.50/- so different of Rs.1000 (credti memo - invoice)
    so Recoverable from vendor is Rs.1050/- hope this solved your thread
    thanks
    Trinath

  • Tcode for Print Vendor Credit Memo...

    Hi All,
    Can i Know the Tcode to printing  Vendor Credit Memo..
    Thanks and regards,
    Suraj

    try F.64 and then F.61
    Thanks and Regards

  • Creating Vendor Credit Memo Using BAPI  BAPI_ACC_DOCUMENT_POST

    Hi,
    I want to create a vendor credit memo using the bapi BAPI_ACC_DOCUMENT_POST but with posting keys as 21 and 50.Is it possible to do so.I tested the bapi passing the data to the accountgl table.Do i have to pass data to another table ?

    hi Eric,
    I even tried passing the data to the accounts receivable and accounts payable tables passing the GL account no in these tables.Still teh document get posted with keys 40 and 50.Also the credit entries should be assigned to COPA segment of sales order/item.
    The vendor credit memo should look as follows look as follows:
    Dr Vendor (PK = 21) $ 35,000
    Cr Freight expense account (PK = 50) $ 10,000……….assigned to COPA segment of sales order/ item 20000397/10
    Cr Freight expense account (PK = 50) $ 5,000……….assigned to COPA segment of sales order/ item 20000397/20
    Cr Freight expense account (PK = 50) $ 20,000……….assigned to COPA segment of sales order/ item 20000398/10

  • FB65 - Vendor credit memo

    Hello Experts,
    I have a question reg vendor credit memo. When I post a credit memo, vendor account gets debited and what will be the GL account used for credit entry?  
    Am using this credit memo to balance the wrongly posted vendor invoice.
    Any help is highly appreciated and duly rewarded.
    Regards,
    Sriram

    First you check teh invoice ;
    Normally if you are using FB60 It will be
    Expence A/C Dr  TO      100000
       Vendor A/C                100000
    Suppose if you want  raise Credit Memo Using FB65(first you decide amount)
    then It will be
    Vendor A/C Dr TO    25000
    Expence A/C           25000
    THEN YOU PAY REMAINING 75000.
    SYSTEM WILL CLEAR ALL LINE ITEMS AT THE TIME OF PAYMENT.
    CHANDRA

  • Vendor credit memo issue

    Hi everyone,
    we overpaid vendor PO related invoice, vendor issue us a refund check to us. what we should do in SAP? I use MIRO issue a credit memo ,and post an incoming payment using F-52, but not sure it's the right way.
    I guess my question is : If vendor already cashed the check, shall we still use MIRO to issue a creadit memo?  how does the accounting work? did PO get reduced?
    please advise.
    thanks,

    Dominic,
    I got the answer of difference between Subsequent Debits/Credits and credit memo:
    Subsequent Debits/Credits are used in cases where the quantity is in the original invoice is to remain the same. For eg.
    PO  10 - $10
    Gr   10 - $10
    LIV 10 - $11 (Logistics Invoice Verification)
    The vendor invoice is more than that in the Purchase Order. In order to correct, the Vendor may send in another invoice for
    the Increased amount or a credit memo for the increased amount.
    If you approve of the price increase, post the subsequent invoice received as a Subsequent Debit/Credit Invoice.
    If it is a credit memo that has been received, then post the credit memo as Subsequent Debit/Credit.
    This would retain the quantity but reduce the amount.
    Subsequent Debit/Credit is for the case when the credit is not for the full amount eg. if the Vendor decided to credit
    only the $1 overcharged.
    Credit memo is for the credit of the full amount and value.

  • APP Vendor Credit memo to net off aginst normal invoice

    Hi All
    I would like to know,  what are all the references for "netting off of debit amount of vendor with credit amount while perfroming Automatic Payment run at T.Code F110.
    Ex:  I have a Debit amount against Vendor XXXX of Rs 21000 and Credit amount of Rs. 25000,  At APP system isnot picking up Credit  memo line item of Rs. 21000 for payment.
    please give ur suggession.
    Thanks in advance.

    > Ex:  I have a Debit amount against Vendor XXXX of Rs
    > 21000 and Credit amount of Rs. 25000,  At APP system
    > isnot picking up Credit  memo line item of Rs. 21000
    > for payment.
    Is the credit amount 21000 or 25000?
    Is the credit (invoice) blocked for payment?

Maybe you are looking for