Partial delivery at item level base-on sales order

Dear experts
In the customer code,the fileld 'Partial delivery per item' controls if Partial delivery allowed.
In my scenario,i want to control the Partial delivery base-on every sales order not customer code.
Because some sales order of this customer code will Partial delivery allowed,some not.
If there are configuration to implement it?
TKS!
Edited by: stephen chow on Oct 20, 2008 5:15 PM

Stephen,
If you want to restrict the Partial delivery you can do this at 3 levels:
Customer master
Customer material info record
Sales order.
If you want the specific sale order to have the partial delivery control...you can set it at the sales order-item level-shipping
If the restriction is on Material, then maintain CMIR
Regards,
Prakash

Similar Messages

Billing date at line item level in a sales order

HI!
Can anyone let me know the significance of billing date being present at the line item level in a sales order?
And why does it get changed as per the Requested delivery date if the Prop. Pricing date in the maintanenece of sales doc type is set as 'A'?
Can it be different for different line items?

Hello Asha,
Can anyone let me know the significance of billing date being
present at the line item level in a sales order ???
The comprehensive information is available at SAP technical help(F1) for the "BILLING DATE" field at Sales Order line item level...Before raising these type of questions, i would urge to conduct initiate analysis and then post at SDN forum if you are unable to find out answers...For your quick reference, i have extracted the same description for Billing date from SAP techincal help (F1) and pasted below.
Billing date for billing index and printout
+The date on which the billing is processed and booked for
accounting purposes.+
Use
+You can use the billing date as one of the selection criteria
when you process billing documents collectively.+
Procedure
+If invoice dates are defined for the customer, the system proposes
the billing date from the invoice date calendar. If no invoice dates are
agreed, then the actual goods issue date is formed on the basis of
delivery related billing. In order related billing, the billing date of the
order forms the basis of the billing date.+
+If you are billing services, the system proposes the date of services
rendered. You can change the date manually in the sales document.+
+If you are using a billing plan to bill a project, the system can propose
billing dates for the billing plan on the basis of planned or actual dates
in the corresponding milestone.+
+In a billing plan for a maintenance or rental contract, you can specify rules
by which the system determines billing dates on the basis of other dates in the contract.+
Regards,
Sarthak

Shipping point at Item Level of a Sales Order

Dear Gurus,
Can anyone explain to me step by step how can I copy:
1- The shipping point
2- The route
At Item level of a Sales Order in VA01
Many thanks
Regards
Chris

Dear Gurus,
Can anyone explain to me step by step how can I copy:
1- The shipping point
2- The route
At Item level of a Sales Order in VA01
Many thanks
Regards
Chris
Hi Chris,
Answer to your Question,
Please understand that Shipping Point and Route will be automatically determined based on the configuration settings we make. However we can even override the values manually in sales order screen (Va01 / Va02). See below the config settings to be made for Shipping point and Route:
1. Shipping Point.
Based on the combination of below three parameters, Shipping Point will automatically populate while creating a Sale order. (VA01)
          Shipping Condition
          Loading Group
          Delivering Plant
SPRO- Logistics Exceution - Shipping - Basic Shipping Functions - Shipping Point and Goods Receiving Point Determination - Assign Shipping Points
2. Route
Based on the following Four factors from configuration:
Departure Zone of Shipping Point
Destination Zone of Customer (Shipto)
Shipping Condition from Customer master.
Transportation Group from Material Master.
Hope this Solves your Issue.
Regards,
VBASHA

How to change the posting date at the line item level in a sales order

how to change the posting date at the line item level in a sales order

Hi,
I believe the POSTING DATE will appear on the accounting document
In the Accounting document, the posting date will be based on the Billing date.
Please let me know if you need any more details
santosh

ITEM LEVEL CONTROL IN SALES ORDER

Dear All,
In a sales order if I have 5 line items,usualy if the stock is not there for first two line items, in delivery it will start with 3rd line item...Is there any control in item level where I can keep first line item as mandatory ,then only it should process to second line and 3rd line item with out using any userexit.
Please help
Regards
CNRNAIR

with out using any userexit.
No unless you apply a suitable user exit, this requirement cannot be met.
thanks
G. Lakshmipathi

Dont allow to change item level data in sales order.

Hi all,
I have a requirement in which, users should not be allowed to change item level data or not allowed to add any new items in sales order on a certain condition. But they should be allowed to change the header level data.
How can i achieve this.
Can anyone help me?

Hi,
Check below exit.
MV45AFZZ and in form USEREXIT_MOVE_FIELD_TO_VBAP.
Here check for ur validation, If passes then CHECK variable SVBAP-TABIX. If it is 0 then item is created. If it is GT 0 then item is changed. Other way could be...
select data from VBAP for each sales document and item in xvbpa internal table.
If for any item u don't have data in VBAP table that means u r adding that item. So issue error message.
*       FORM USEREXIT_MOVE_FIELD_TO_VBAP                              *
*       This userexit can be used to move some fields into the sales *
*       dokument item workaerea VBAP                                  *
*       SVBAP-TABIX = 0: Create item                                 *
*       SVBAP-TABIX > 0: Change item                                 *
*       This form is called at the end of form VBAP_FUELLEN.          *
Thanks,
Vinod.

Incompletion log Profitability Segment at item level in the Sales Order

Hello Sapians,
We recently activated the "Sales Order value flow to COPA". When we create the Sales Orders the Profitability segment for the item is getting picked up automatically and have no issue in saving the Sales Order.
But when we edit the Sales Order and then try to save it, Sales Order has incompletion log which is leading to Profitability segment in the item level.
When I click the little box in Sales Order Item > Account Assignment tab> Profitability Segment forward arrow--> "continue" or "derivation" in the populated screen, then the Forward arrow in the profitability segment is deriving the characteristics, then system lets us to save the Sales order with out any incompletion log.
I checked the OSS notes 114520, in this OSS note, my sitiuation is exactly first point but could not get any clue how to resolve automatically.
Why it is happening only when we edit the Sales Order? How to update bulk of Sales Order automatically?
Any inputs?
Thank you.

Hi
Since you have activated the Sales order flow to COPA, any change in the sales order triggers a Prof Segment redetermination.... Thats why you are able to save it once you redetermine the Prof Segment....
Ideally, if no Chars like Plant/Org Elements/etc are changed - It need not trigger the Prof Segment redetermination...
Refer Note 729381 - When is a profitability segment supposed to be determined?.... With ref to this note, raise an OSS msg to SAP and check if it is possible to avoid the redetermination of PSG as long as none of the relevant chars are changed in the sales order....
There is a similar issue in MTO where by, even if you change the Header text of sales order, it triggers the Sales order cost estimate.... SAP provided a note to stop this... Note 1548608 & 1260868.... Your case is similar to this.... Raise an OSS to SAP and ask them if they can provide such a note for your case.... I feel, it should be possible for SAP to give this!
br, Ajay M

Display cost center field under item level when creating sales order

Hi dear experts,
during the sales order creation(tcode VA01), is it possible to display the cost center field in the tab account assignment under item level??
currently we are using ECC6,in the tab account assignment, the cost center field was actually already defined in the screen by the system...i used to try to 'activate' the cost center field VBAP-KOSTL in the user exit MV45AFZZ, but the cost center still not shown.
I know that there is a config to the sales doc type can be used to open the cost center at header level, how about item level?
thanks and best rgds
Mu

Hi,
The Cost Center Determination settings is in OVF3 - but there are some cases where the Cost Center must be exceptionally changed.
If the document category for order type in IMG VOV8 is defined to be "I" which belong to order type FD - Deliv.Free of Charge, then the field cost center is active for input during transaction VA01.
Alternatively, you can specify an order reason and assign a cost center to an order reason.
However the standard SAP works only at the header level though, so it would not work if cost center is needed on the line item.
The cost center are assign for such business transactions as :
- Free deliveries
- Returns
- Deliveries of advertising materials
You can also make cost center allocation dependent on the order reason, for example:
Order reason: Damage in transit
Order reason: Free sample
Both the IMG settings are done in transaction OVF3, either with/without the order reason.
regards,
Siddharth.

How to change the product category on the item level of a Sales order

1) For each product there are Basic Product Hierarchy and Sales Product
Hierarchy.
2) when creating sales order, system gets the Sales Product Hierarchy
on the Item level with the default logic.
So our question is: how to change the logic to let system get the Basic
Product Hierarchy on the Item Level.

Hi,
I believe the POSTING DATE will appear on the accounting document
In the Accounting document, the posting date will be based on the Billing date.
Please let me know if you need any more details
santosh

Make Net Value Field at item level Editable in Sales Order

Hi
All pricing in our system are manual .
So the client wants to change the Net Value Field in Credit and Debit Memo Request to be Editable ( Currently it is not modifiable)
Plz suggest how to g about it.
Do i need to use Userexit_ Field_ Modification, if yes how , The field VBAP-NETWR.
REgards
Rohit

Hi Yadav
Changing Net Value will effect the updation of various tables ...so u r right not the correct approach .
Can i put condition type and its value in Credit Request Memo and its value aditable same as in screen for Sales Order .if yes how , changing screen sequence group in credit memo request is creating problems
Regards
Rohit

Partial delivery per items always copy sold to settings

Hello SAP Consultants,
Currently in my clients' business process, there are scenarios where customers (sold to) can have different ship-to parties. Thus, they maintained partial delivery per item specific for ship to party under sales area shipping tab of customer master (XD01).
However, when creating sales orders where sold to party is not equivalent to ship-to party, the partial delivery per item of the material ordered corresponds or is referenced from the sold to party settings and not the ship-to.
How can we make it possible to reflect the ship-to settings of the partial delivery per item to be defaulted when sales order is created? Is there configurations needed?
Please advise.

Standard SAP copies the Partial Del Per Item field values from Sales order - Sold to Party. If you have to change that and read the ship to instead, then you will have to go for enhancement.
Please work with your ABAPER to get it done. Try to work on user exits MOVE_FIELD_TO_ABAP in the program MV45AFZZ.
Regards
Sai

Adding Variant in Header Level in the Sales Order

Field "Card Verification Value" (CVV) is part of the Standard from Support Package SAPKH47028 onwards. But if you like you can use a variant for screen SAPMV45A4440 and set
field "Card Verif.Code" to invisible in this variant.
This is the reply from SAP after implementing the new support pack. Now there is an additional field in VA01 that I am trying to remove.
I can add the variant in Table Settings but that is on Item Level in the Sales Order (VA01). How do I do it in Header Level?

Hi,
Go to SHD0 ,write down the Transaction code , transaction variant then go to Tab " With Processing'.
Now you will be in T Code VA01 ,press enter and you will get all the variants maintained in Header Level.
Now you can activate / deactivate as per your requirement.
Best Regards,
Ankur

Partial delivery per item in sales order and ATP - schedule lines

Hi,
I've problem regarding ATP- schedule lines and partial delivery flag.
In sales order there is flag Partial delivery per item B / 1 . That means create only one delivery even with quant 0. That comes from customer master or customer info-record and it is OK.
Please look at next example.
Customer requires:
10 PCS of materail A on date X. Only 5 PCS are available on date X.
10 PCS of material B on date X 0 PCS are available on date X, 10 PCS are available on date Y.
So if we create outbound delivery on date X it will contain only 5 PCS of material A. No successive deliveries will be created for material A because of the flag B/1. That item is closed.
Problem is with material B.
The sales order will be open because of material B and on date Y we can easily create another delivery with 10 PCS of mat B.
That is wrong. Agreement with customer is only one delivery for ALL items in sales order. If we create delivery on date X it should contain only materials which are available on date X and sales order should close.
Do you know how to fix this problem?

Hi,
I've think you didn't understand my requirement. I allways get schedule lines but they are confirmed on different dates.
Example in same sales order we have:
Schedule line for item A:
DATE X confirmed quantity 10
Schedule line for an item B.
DATE X confirmed quanitity 0 (zeroe)
DATE Y confirmed quantity 10.
I would like to create outbond delivery on date X with:
item A quantity 10
item B quantity 0.
And if that hapens than B/0 rule will work or reference customzing that you suggested before. So order will be closed because all items are processed or referenced once.
Do you know how to do that?
Regards

ATP Check at Delivery Level instead of Sales Order

In Standard SAP, whenever a sales order is created the ATP check is done and a Goods movement 601 is done for it and gets blocked.
I want that no movement to be carried out at Sales Order Level and should get blocked only at the Delivery level, instead of Sales order.
Can i do this by not defining any movement type in the schedule line category attached to the Item category of the sales order.

hi amit,
u cannot remove MT assignment to SLCAT ,but what you can do is for your checking group and checking rule remove the ATP check relevancy in requirement class defination in spro customising >sd>availibility and TOR.
so that in VOV4 transaction for your SLCAT atp will be deactivated.
only while posting material doc at the time of PGI system would check for availibility and block the goods movement.
reward if helps !!!!!

Partial Delivery Per Item Setting Not Effective

Hi,
Any help greatly appreciated.
We have a business requirement whereby sales orders may be partially shipped but the sales order lines themselves MUST be shipped complete.
Therefore we have set the customer master record accordingly ie Partial Delivery Per Item = C ( Only complete delivery allowed)
This setting is indeed copied into the sales order but the availability check seems to ignore it. Instead it proposes a delivery schedule ie 100 qty del tomorrow, balance in 2 weeks.
I would expect that the availability WOULD NOT split the qty like this instead propose the complete qty in 2 weeks.
I could probably get round this by making the message an error during delivery creation, but I would really like the sales order to behave as expected and make an intelligent 'promise'
Am I missing something somewhere?
Please help.
Regards
Guy

Hi,
You can try the following setting;
In SPRO -> SD -> Basic functions -> availability check and TOR -> Availabity check -> Availability check with ATP logic or against planning -> Define default settings. The t.code is OVZJ.
Here for your sales area, under Availabitlity check rule column, you can assign value B and try.
Regards,

Partial delivery at item level base-on sales order

Similar Messages

Maybe you are looking for