Partition Help, cannot find an answer.

Hi everyone,
I attempted to create a Windows 7 partition on my macbook today and after watching it attempt to create a new partition for the best part of sx hours whilst i was working I somewhat foolishly quit the Bootcamp Assistant.
When I go into finder my boot drive is noq telling me I only have 8gb of space remaining. This makes sense as the partition I created would have left me with 8gb left on the OSX side of things and there should be a 160gb partition for Windows.
When I go into Disk Utilities it shows I have a 640gb Boot disk in one partition and a 160gb Generic External Media.
I can't do anything else with the Bootcamp Assistant as it tells me I need 10gb of free space to work.
Please, is there anyway to reintroduce this space back to my HDD or install windows to the 160gb partition I assume it has kind of created?
So essentially Bootcamp has stolen 160gb of space which it is now showing as external media whilst still saying there is only one partitio on the main HDD.
Any help with this would be most appreciated.
Thanks very much!

You can remove the BootCamp Partition.
http://www.macworld.com/article/1156195/delete_boot_camp.html
http://www.simplehelp.net/2009/01/26/how-to-delete-a-boot-camp-partition/
http://www.lockergnome.com/osx/2011/08/25/how-to-uninstall-boot-camp-on-os-x/
http://www.iclarified.com/entry/index.php?enid=20949

Similar Messages

I actually need help but cannot find the answer. Please.......Lately when open a new tab it does not open with a blank page. I don't want to set my homepage as

I actually need help but cannot find the answer.
Please.......Lately when open a new tab it does not open with a blank page. I don't want to set my homepage as blank as when I first open Firefox, it automatically loads my hotmail page. But then if I open other pages I don't get a blank page. Help, please?
Thank you.
''[Personal information removed by moderator. Please read [[Forum and chat rules and guidelines]], thanks.]''

hello, please refer to [[New Tab Page – show, hide and customize top sites]] in order to switch the feature off.

Cannot find '\\file\name'. Verify the path or Internet address is correct. Cannot find any answer any where in this forum.

I cannot find any answer any where in this forum. PLEASE Help!!! I'm receiving this error message every I click on the link, this only happen
on the desktop, but Laptop has no problem to access the file, and everyone else in my group --they don't have issue.
Run Windows 7 Enterprise SP 1, IE ver 9 and 11
Thanks in advance.
Akira

Hi,
Could please clarify the steps to reproduce this issue? Did this issue occur when clicking on a link in an email message within Outlook?
If I didn't misunderstand it, please first try to log into the web mail to check if this issue persists.
If problem didn't exist in webmail, please try to open your Internet Explorer with no add-on mode to troubleshoot the issue. See:
http://support.microsoft.com/kb/976915/en-us
If above didn't fix the issue, please try to reset your Internet Explorer to check the result:
http://support.microsoft.com/kb/923737/en-us
Note: Resetting Internet Explorer isn't reversible, and all previous settings are lost after the reset.
Hope this helps.
Regards,
Steve Fan
TechNet Community Support

I would like to see the added keywords under the picture like iPhoto does it. Is that possible? I cannot find an answer

I would like to see the added keywords under the picture like iPhoto does it. Is that possible? I cannot find an answer in Aperture 3.2.1

Hello Wontolla, I meant the Aperture main menu, there is a sub menu "View", see the Screenshot:
Set all flags in the Metadata Display submenu as I did, to show Metadata in Viewer and Browser, and then select "Customize"
Pick the Metadata fields you want to display for all views.
Make sure, that "Contents -> Keywords" is checked.
Regards
Léonie

HT201363 I cannot find the answers to my security questions for Itunes and cannot figure out how to reset them

I cannot find the answers to my security questions for ITunes and cannot figure out how to reset the questions.

You need to ask Apple to reset your security questions; ways of contacting them include phoning AppleCare and asking for the Account Security team, clicking here and picking a method for your country, and filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(105414)

HT201272 Does anyone know how to get an episode of a tv programme that never downloaded when I bought a subscription. Episode 1 didn't download and I have all other episodes. I looked at the issues through report a problem but I cannot find an answer.

Does anyone know how to get an episode of a tv programme that never downloaded when I bought a subscription. Episode 1 didn't download and I have all other episodes. I looked at the issues through report a problem but I cannot find an answer.
I bought a series pass and unfortunately epsiode 1 didn't download at all. I was watching the downloads and restarting once they stopped as I allow multiple downloads at athe same time

It sounds like you may have hidden it, in which case you should be able to unhide it : iTunes Store: Hiding and unhiding purchases. (You can't turn off the hiding of items.)
But you should be keeping and maintaining a backup copy of all of your downloads and not relying on being able to redownload them - any item could be removed from the store by the rights-holders at any time, if they do then you won't be able to redownload them (nor will be able to do redownload items if you move countries).

ITUNES 7.0 - I cannot find an answer to this anywhere? I NEED HELP

On certain albums, my computer rearranges whichever song is playing to the first position on the album, but the track number stays the same. It then proceeds to play the album reordering the songs, which often results in the same songs being played over and over. It only does this with certain albums though, and I cannot find a way to fix this. It never did it in iTunes 6, but whenever I updated to the newest version, it started. I have posted 2 previous posts about this and nobody has responded saying they know what to do. I also cannot find an email address to email apple support at. SOMEBODY PLEASE HELP ME

I think I solved the problem. I think iTunes somehow named an "Album Artist" in addition to the "Artist" (or stripped the Album Artist from the other tracks). The trick here is to use Get Info to see what is different about the odd track. I'm ashamed I didn't use this diagnostic technique earlier. Anyway, deleting the text from the offending song fixed the problem.
I think I must have converted the song to the protected format some time ago, just to try it out.
I'd ask you to re-upgrade to 7.0.2 just to see if this works. If it does, you may want to mark this question as answered.

I cannot find the answer to my question.

I bought songs on my iPhone, but now iTunes on my PC cannot find them. I can look at the songs/albums, but I cannot listen to them. AT ALL. I had deleted some songs from the phone because I assumed that, when I'd synced the phone with the PC the songs would be there for me to transfer back later. But they're not there. And the support articles are completely useless. And then, when I tried to email support, the email wouldn't go through. I am disgusted.

Check if solutions given in this article help: [https://support.mozilla.com/en-US/kb/Back%20and%20forward%20or%20other%20toolbar%20items%20are%20missing Items missing]

Need help: Cannot find Microsoft Word installed on your system.

I am having issues trying to generate a pdf from a robohelp 7 html project. Whenever I try to generate a pdf I get the error "Cannot find Microsoft Word installed on your system."
I have tried to uninstall both Office (2003) and robohelp, re-installing office first and then robohelp, but it doesn't help. Can anyone shed some light on this issue?

Colum,
Thanks for the reply, but it's Microsoft Office, not Open Office.
I have read many threads here and tried most of the suggestions, up to and including:
Uninstall/Reinstall of Office and RH 7
Adjusting Macro security
comparing registry entries
There are others but I can't think of them all right now. Point being, nothing has worked thus far. I must admit this is fairly frustrating but I haven't given up yet. Any more suggestions are welcome, and I will review the link you gave me just to make sure I cover all my bases.

NEED HELP cannot find data

Hi all
I just developed a registration application using netbeans 6, glassfish and mysql, JSF EJB
The program runs perfectly apart from a little instability from netbeans. But after the success page has displayed, i Cannot find the data I persisted in the database.
Can some one help me since i'm a bit new to this.
Thanks in advance

Sorry but my problem is that after the persistence, i could not find the data I entered in the JSF register page.
The progran first displays a register page:
after validation the backing bean invokes the session bean method to save the data.
The method returns a string which is then used in faces config to display the login page.
Well when I run the program, everything works fine.
then i enter the select command in the mysql server console to view the data but the new entry could not be found in the database
Is it that the program is faulty or the data was not saved since there was no exception or error dispalyed

Help - cannot find symbol error

Can someone help me? I am getting "cannot find symbol" error in my code and cannot figure out why. Here is my code:
public class toyInventory
private String[] toyInventory = {"ball", "bat", "bear", "car", "doll", "game", "glove", "playstation", "train"};
private int[] nineArray = {0,0,0,0,0,0,0,0};
int invItems = 0;
public void countToy()
String orderInput[] = {"bear", "train", "car", "ball", "doll", "ball", "train", "doll", "game", "train", "bear", "doll", "train", "car", "ball", "bat", "glove", "bat", "b", "doll", "bear", "ball", "doll", "bat", "car", "glove", "train", "doll", "bear"};
int noMatch;
for(int a = 0; a < orderInput.length; a++)
noMatch = 0;
for(int b = 0; b < toyInventory.length; b++)
if(orderInput[a] == toyInventory)
noMatch = 1;
break;
if(noMatch == 0)
invItems = 1;
public void printItems()
for(int c = 0; c < toyInventory.length; c++)
if (countToy[c] > 4)<-------- cannot find symbol error here
System.out.print("*");
System.out.print(toyInventory[c] + "\t" + countToy[c] + "\n"); <----cannot find symbol error here also
System.out.print("The number of invalid items in the order is" + invItems);
public static void main( String[] args)
toyInventory collection = new toyInventory ();
collection.countToy();
collection.printItems();

public void countToy()
String orderInput[] = {"bear", "train", "car", "ball", "doll", "ball", "train", "doll", "game", "train", "bear", "doll", "train", "car", "ball", "bat", "glove", "bat", "b", "doll", "bear", "ball", "doll", "bat", "car", "glove", "train", "doll", "bear"};In the above code you have declared countToy() as method and while in the below lines you are calling countToy[] as an array. So please check that...
if (countToy[c] > 4)<-------- cannot find symbol error here
System.out.print("*");
System.out.print(toyInventory[c] + "\t" + countToy[c] + "\n"); <----cannot find symbol error here also
}

Help - cannot find digital copy movie on iPad for flight tomorrow

Ok. I'm not apple intelligent... But I do OK. Flying with my 2, 3 year old and 5 month old alone.... I purchased the blu-ray combo pack today of despicable me for the kids tomorrow on the plane! I only have my iPad.... So I downloaded iTunes onto my parents computer, authorized it, loaded the digital copy into iTunes (shows up and plays from computer) and synced without problems....so I thought. I cannot find the movie anywhere on my ipad2 tho! I can only find options for songs and some TV programs we have from iTunes. The only videos in the Video option are music videos that came with a CD purchase. HELP QUICK PLEASE! The insert with the movie says it is compatible with iTunes and Apple devices/mobile devices?

Ok. Only music videos shows up on the videos options. I tap all around and no other options. I looked in advanced options and the iPad/iPod option is greyed out.
Think my iPad synced to my computer.... So for me to sync my computer to my iPad (as in just the movie...) it will erase everything? I feel like I should be ale to drag it over, but I get a red no circle when I try that......

TS4268 I CANNOT find an answer to my problem. iMessage not working.

I have had my iphone 3gs for over 3 months and now my iMessage is not working. under settings it says waiting for activation, and I am outside of the 90 day free support window. the tech told me to go to the support pages and I could find the answer no problem. I can't. I have had this problem ever since I updated to iOs 6.01. can anyone help me get my imessage working again. I need it so I can send messages over wifi since my phone is not activated right now to use over cellular networks.

http://support.apple.com/kb/TS2755 shows the requirements for iMessage to work. On an iPhone you do need an SMS plan for it to work. It likely will never activate because you do not have it activated on a cellular plan.
edit for spelling

[help] cannot find symbol

I'm trying to work on lessons from a book called Java Server Faces. Only problem is there seems to be a java file i cannot compile. Maybe someone here can see whats up?
here is the error i get when i run javac TableData.java
TableData.java:4: cannot find symbol
symbol : class Name
location: class com.corejsf.TableData
private static final Name[] names = new Name[] {
                     ^
TableData.java:11: cannot find symbol
symbol : class Name
location: class com.corejsf.TableData
public Name[] getNames() { return names;}
       ^
TableData.java:4: cannot find symbol
symbol : class Name
location: class com.corejsf.TableData
private static final Name[] names = new Name[] {
                                        ^
TableData.java:5: cannot find symbol
symbol : class Name
location: class com.corejsf.TableData
new Name("William", "Dupont"),
    ^
TableData.java:6: cannot find symbol
symbol : class Name
location: class com.corejsf.TableData
new Name("Anna", "Keeney"),
    ^
TableData.java:7: cannot find symbol
symbol : class Name
location: class com.corejsf.TableData
new Name("Mariko", "Randor"),
    ^
TableData.java:8: cannot find symbol
symbol : class Name
location: class com.corejsf.TableData
new Name("John", "Wilson")here is the code
package com.corejsf;
public class TableData {
private static final Name[] names = new Name[] {
new Name("William", "Dupont"),
new Name("Anna", "Keeney"),
new Name("Mariko", "Randor"),
new Name("John", "Wilson")
public Name[] getNames() { return names;}
}I believe i have all my jar files properly located in webapps/xxx/web-inf/lib
but i could be wrong..
thanks

If its a sample application from some place they should have provide it. Otherwise if the Name class usage is simple you can create the class file yourself.
Subsequently you can create you own jar file for this using the
jar cvf [jar file name].jar [package folders]\*.class
and place it in WEB-INF/lib

Is there an adobe lightroom helpine I can call-.I cannot find the answer on any of the forums. Does anyone have a number?

Helpline number for Lightroom???

Have you actually asked your question you are trying to find an answer to? I don't know the support telephone number. But from what I have heard, you'll probably get better help here if you ask your question.
I see that this is the second time I have responded to you regarding this same issue. I can go out and search using Google or whatever to look for the phone number, but you could do it just as easily. If you don't want to try to get help here, that's just fine. But there isn't much sense in asking a question more than once. If no one else has answered the other one it's kind of doubtful that they will answer this one.

Partition Help, cannot find an answer.

Similar Messages

Maybe you are looking for