Partition of FW HD error. Help please.

I have an Iomega eGo portable FW HD which I have been using as my Time Machine backup drive for a year now. Yesterday I noticed that TM tried to backup but failed so today I ran Disk Utility on the entire drive and one partition checked out fine, while the other - the TM partition - produced the following error:
Verify and Repair volume "Iomega_HDD_TM"
Checking Journaled HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Invalid node structure
Volume check failed.
Error: Filesystem verify or repair failed.
What could be the problem and what must I do to correct it? Repairing the partition fails.
MAC G5
10.4.11

There is a major defect in that volume's directory structure that DU is unable to repair. However,
Disk Warrior should be able to fix the problem.

Similar Messages

HT4623 My ipad keeps crashing & now it won't come back on, just comes up to connect to itunes. Did that and tried a restore but just keeps comin up an unknown error, help please, I have so much on my ipad.

My ipad keeps crashing and this time it won't come back on it just keeps telling me to connect to itunes which I did and it just keeps telling me it can't restore this ipad because an error has occured! Really need help please?

If it keeps coming up with an unknown error - no error code given - try another computer. If that doesn't work, it's time to take it to an Apple Store or an authorized service center to have the device evaluated.

After Effects PNG Sequence Error Help Please

When I try to render a png sequence I got the following errors
After effects warning: Could not create file <file path> Access was denie
Another message box saying
AEGP plugin PNGIO Support: Unable to create PNGIO
(5027::12)
Another message box saying
After Effects error cannot close a closed file
(3::5)
It renders a few frames and then it crashes with these errors. Please help THANKS

Here is my log
Adobe After Effects v12.0 (Windows 64) render log for project “Untitled Project.aep”
Rendering started on 11/8/2014 at 9:34:58 AM
11/8/2014 9:34:58 AM: Starting composition “cinematicsPre 2”.
Render Settings: Best Settings
Quality: Best
Resolution: Full
Size: 1702 x 953
Proxy Use: Use No Proxies
Effects: Current Settings
Disk Cache: Read Only
Color Depth: Current Settings
Frame Blending: On for Checked Layers
Field Render: Off
Pulldown: Off
Motion Blur: On for Checked Layers
Solos: Current Settings
Time Span: Work Area
Start: 0:00:04:10
End: 0:00:25:27
Duration: 0:00:21:19
Frame Rate: 30.00
Guide Layers: All Off
Skip Existing Files: Off
Output Module:Lossless
Output To:C:\Users\Matthew\Desktop\Youtube Stuff\ObeyRC\Sequence\1\cinematicsPre 2_[#####].png
Format: PNG
Output Info: -
Start Frame: 130
Output Audio: -
Channels: RGB
Depth: Millions of Colors
Color: Premultiplied
Resize: -
Crop: -
Final Size: 1702 x 953
Profile: -
Post-Render Action: None
0:00:04:10 (1): 3 Seconds
0:00:04:11 (2): 1 Seconds
0:00:04:12 (3): 1 Seconds
0:00:04:13 (4): 1 Seconds
0:00:04:14 (5): 1 Seconds
0:00:04:15 (6): 1 Seconds
0:00:04:16 (7): 1 Seconds
0:00:04:17 (8): 1 Seconds
0:00:04:18 (9): 1 Seconds
0:00:04:19 (10): 1 Seconds
0:00:04:20 (11): 1 Seconds
0:00:04:21 (12): 1 Seconds
0:00:04:22 (13): 1 Seconds
0:00:04:23 (14): 1 Seconds
0:00:04:24 (15): 1 Seconds
0:00:04:25 (16): 1 Seconds
0:00:04:26 (17): 0 Seconds
0:00:04:27 (18): 1 Seconds
0:00:04:28 (19): 1 Seconds
0:00:04:29 (20): 1 Seconds
0:00:05:00 (21): 1 Seconds
0:00:05:01 (22): 1 Seconds
0:00:05:02 (23): 1 Seconds
0:00:05:03 (24): 0 Seconds
After Effects warning: Could not create the file 'C:\Users\Matthew\Desktop\Youtube Stuff\ObeyRC\Sequence\1\cinematicsPre 2_00154.png'. Access was denied.
AEGP Plugin PNGIO Support: Unable to create PNGIO. (5027 :: 12)
After Effects error: cannot close a closed file. (3 :: 5)
11/8/2014 9:35:23 AM: Finished composition “cinematicsPre 2”.
Total Time Elapsed: 25 Seconds
Log closed on 11/8/2014 at 9:35:23 AM

Itunes 10.4.1 64bit for Win 7 can't find quicktime, QTCF.dll error -- HELP PLEASE!

Every time I install itunes 10.4.1 64bit for Win 7, it says it is unable to find quicktime, then instructs me to uninstall itunes then install it again. I've done this several times but still have the same problem. There is also another promt that says quicktime can't find the entry point and there's an error having to do with QTCF.dll ... what is this and how can I get my iTunes to work? Help please!

hi guys i found the solution from a wizard of the community and it works, so u may try as follows:-
Correct Answer by b noir on Aug 24, 2011 8:13 PM
Let's try a standalone QuickTime.msi update. It may not install correctly either, but fingers crossed at least the error messages we get from that install may better indicate the nature of the trouble with the QuickTime install.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the QuickTime.msi to do a standalone QuickTime.msi install.
Does it install properly for you? If so, does iTunes install properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Xcode entering input error help please

When i run Xcode 4.5.2 on Lion and i need to enter some input (ex. cin.getline(array,10)), i need to press enter two times to keep going.
Here is the code:
player1 and palindrom are arrays of char
and here is the output:
I enter Juan in player1 then i press [Enter] and i need to press another [Enter] if i want the prgram to continue
and when i enter the palindrom is not stored in the array, instead the second [Enter] is stored on the palindrom array.
Help please
i dont know what to do i have looked on the internet but i havent found anything to solve this problem......

You are mixing up two different ways of getting user input.
1. getline -- a standard <stdio> function which reads user input and a return;
2. cin -- a C++ <iostream> function which reads user input and a return.
See http://crasseux.com/books/ctutorial/getline.html and http://www.htmlhelpcentral.com/messageboard/showthread.php?4359-C-Tutorial-1-cou t-cin for the proper way to use either one of them; you cannot use both in the same command.
quiban92 wrote:
i dont know what to do i have looked on the internet but i havent found anything to solve this problem......
Those two links were the very first hits on a search for "getline tutorial" and "cin tutorial".

Chapter end action triggers General Error - Help please!

Hi, I am working on a project and have come to a big problem in the last hurdle, classic! Really need your help, experts!
I have 2 Timelines, each one with 6 audio tracks and 2 subtitle tracks
One of the timelines is longer than the other one because it has two different films in it.
Everything was working fine until I realised I had forgotten to set the end action to the last chapter of the first video in the timeline, I need it to either stop or return to main menu or last menu, otherwise it will go on to play the second film and i don't want this to happen.
When I set the end action to the chapter 10, it looks fine, I check and no problems.
But when it starts transcoding... after a bit, when it has transcoded all the languages it goes to prepare to build and I get GENERAL ERROR and it freezes.
Please please please if somebody can help me it would be very much appreciated.
Mariana
ps I have no overrides or anything like that in the whole project

Please list the Assets on each of the two Timelines with full detail. A screen-cap of each would probably be very useful and save you some typing.
Some things to also think about is are there any spots where your Audio is longer (even very slightly) than the accompanying Video? Are there any gaps on any of the Timelines? When you added that "End Action," exactly how/where did you add it? Also, if you have any Chapter Playlists, or Playlists, please give details on those.
Note: to attach the screen-caps, us the little "camera" icon on the editing screen:
Good luck,
Hunt

Partition failure! Require URGENT help please!!!

Okay so I was just using the Boot Camp assistant to install Windows 7. During the set-up process, Windows reported that the partition disk which I made (30 GB partition, FAT32) has to reformatted to NTFS. As a result, I changed my mind and wanted to remove the partition as I thought this process would be too complex for me!
So I went to Disk Utility and clicked on my hard disk and then selected the partition tab. I removed BootCamp partition by clicking the "-" sign and pulled down the Mac Hard disk back to its original space. But I didnt notice the "Apply" sign over there and just closed the Disk Utility!
Now its showing less hard disk space!
Here's what the problem is:
Originally
1) 320 GB hard-disk with 260 GB free space (all before partitioning the disk)
And now after removing the partition and my HORRIBLE mistake,
It is a 286 GB hard-disk with 239 GB left.
Please people, I really love my MacBook and I don't want to cause any harm to it!
Please, please help me get my Mac to get back to its original hard-disk state!
Regards,
Sam

Thanks for the advice but could you just help me more on that, i mean how to do that after inserting the Mac OS X CD inside the drive....
Thanks for the help again!

Tiger installation error - help please

Can anyone give me any advice?
Trying to install Tiger, get through the DVD test and disk verifying, and then get this error message
"There were errors installing the software please try again"
(which of course i have with no luck)
- i've updated firmware
- run disk utilty and cocktail
- removed all peripherals
- Have plenty of harddrive space
I read on the apple support pages this may be a RAM issue. I have 512MB internal RAM which was a replacement for a corrupt card, (done about six months ago and been fine), and 512MB added in the slot. I've removed the 512 in the slot and tried to reinstall Tiger with the same result.
Does anyone have any ideas? Is it possible to turn off the internal RAM and just run off the slot card?
Appreciate any help

Here's a long discussion about the -9972 error. It can be pretty serious, so take the time to explore the solution options that are outlined. If all fails be sure to backup if you can, then erase the drive and reinstall.
The following was contributed by Fumiaki Kawashima.
The error message, "Error: The underlying task reported failure on exit (-9972)" is a serious filesystem error in the Mac OS X Core Foundation. The problem can also lead to other critical errors such as "Keys Out of Order," "Invalid node structure" and/or "Invalid sibling link." The causes and scenarios vary. Troubleshooting a solution may depend upon computer configuration and whether the -9972 error is accompanied by other critical errors. This issue can also lead up to a kernel panic. If the error occurs when an external FireWire device is connected, disconnect it until you verify the device's compatibility.
Symptoms:
In most cases, you are unable to restart from Mac OS X.
* A volume is grayed out or not mounted with or without a kernel panic.
* A folder with a flashing question mark may appear.
* A bad partition map may be reported.
* A target disk mode solution may not work.
* Most likely, Disk Utility, Norton Utilities, TechTool and DiskWarrior cannot fix the issues.
* The high level disk format (Standard format) may unable to perform.
* You may unable to re-initialize the hard drive.
* A disk physically malfunctions in the worst case.
Example of an accompanied error message:
DiskWarrior normally fixes 1 to 6, but cannot fix errors 7 to 10 if the symptoms are very bad. There is no definite case.
01. Volume check failed
02. Invalid B-tree Header
03. Invalid map node
04. Invalid extents entry
05. Invalid clump size
06. Incorrect block count file
07. Invalid node structure
08. Overlapped extent allocation
09. Keys Out of Order
10. Invalid sibling link
Related documents:
What to Do When It Finds an Error
Technical overview of disk volume structures
Possible causes:
* Third-party FireWire device or enclosure, or other peripheral devices.
* Third-party mass storage drives or PCI card issues.
* Incompatible third-party kernel extensions.
* Mac OS X installer disc is improperly treated.
Solutions:
If possible and needed, back up data before troubleshooting. Methods (4) and (5) are for Power Mac desktop computers other than G5 models. The best bet is method (4) if you encounter multiple bad errors.
1. Unplug the power cord. Disconnect all third-party hardware except Apple keyboard and mouse before you start.
2. Do NOT re-install any third-party software/hardware until you completely solve the issue(s) and carefully investigate the compatibility with Mac OS X 10.3.x you install.
3. If another critical error "Invalid sibling link" is detected at any phases, disconnect and reconnect all internal power cords and data cables for hard drives and any ATAPI device. To do so, you may need to read the computer's CIP Instructions in advance. Normally, you do not need to remove third-party RAMs.
Method 1:
(1) Start up from Mac OS X 10.3.x Panther Full Install CD or DVD.
(2) Re-initialize and re-partition the hard drive. RECOMMENDATION: Select "Zero all data" option if "Invalid node structure" or "Keys Out of Order" error is detected.
If this method is of avail, go to Method 2 or greater.
Method 2:
(1) Start up in Mac OS 9.2.2 and shut down the computer.
(2) Start up from a copy of a Disk Warrior bootable CD for Mac OS 9.2.2.
(3) Run DW to fix the damage(s).
Method 3:
(1) Unplug the computer.
(2) Find a second ATA drive and jumper it as MASTER. Jumper the hard drive in question as SLAVE. Verify the jumper pin settings.
(3) Install Mac OS 9.2.x system on the MASTER drive, and update it to Mac OS 9.2.2.
(4) Start up from Mac OS 9.2.2. Re-initialize and re-partition the damaged hard drive with Drive Setup using the "Zero all data" option. Unplug the computer and reconfigure the jumper pin setting on the repaired drive for MASTER and the second drive for SLAVE.
(5) Restart from Mac OS X 10.3 Panther full install CD. Re-initialize and re-partition the repaired drive to install Mac OS X 10.3. Update to Mac OS X 10.3.7 via Software Update. Repair the disk permissions after each Mac OS X 10.3 installation and Mac OS X 10.3.7 update.
You may want to try starting up from Mac OS 9.2.x Full Install CD instead of from (2) to (4).
Method 4:
(1) Find a desktop computer that has an ATA controller PCI card (SCSI environment) and has two hard drive bays. This will make your damaged drive appear as a quasi-SCSI hard drive. Mac OS 9.2.2 must be pre-installed on the computer. I recommend a host computer that installs an Ultra DMA/xxx or xxx (ATA-x) interface equal to or better than the damaged drive with backwards compatible.
(2) Set the host computer's primary drive as MASTER and your damaged hard drive as SLAVE and install the damaged drive in the second drive bay of the host computer. Verify properly configured jumper pin settings in advance.
(3) Start up the host computer from Mac OS 9.2.2. Launch the "Drive Setup" utility. Re-initialize the damaged disk on the second drive using the "Low level format" option. It may take hours but less than "Zero all data" option. Note: Normally, a low level format with a quasi-SCSI drive takes much less (30 - 40%) time than an ATA configuration drive. Note that "Low level format" fixes all difficult logical damage.
(4) Put the fixed disk back in your computer's drive bay. Re-configure the jumper pin setting to MASTER before you place it into the drive bay of your computer.
(5) Restart from Mac OS X 10.3 Panther full install CD. Re-initialize and re-partition it to install Mac OS X 10.3. Update to Mac OS X 10.3.7 via Software Update. Repair the disk permissions after each Mac OS X 10.3 installation and Mac OS X 10.3.7 update.
Note that Panther's Disk Utility does not implement a "Low level format" option.
Method 5:
If Method 4 does not work or fix the damaged drive, let me know. You may need an advanced technique to fix it if the drive is physically not a problem.
OPTION:
Purchase a known good hard drive that conforms to your computer's ATA specification. Fix the damaged hard drive some other time. Nowadays, prices of hard drives are inexpensive.

OSX Lion Crashing Intermittently Kernal Error HELP PLEASE!!

Please help, I am trying to get a project finished and the craash is getting more frequent, I have unplugged screens and Periperals and put in a new hard drive and a new operating system and its still happening... maybe its a ram error?
Interval Since Last Panic Report: 15467 sec
Panics Since Last Report:          3
Anonymous UUID:                    5A4156FC-86F7-5CE5-3A94-5C9C80C1A289
Thu May 23 15:56:00 2013
panic(cpu 2 caller 0xffffff7f994017f2): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff811de7c000 0x0a5480a2, D0, P2/4
Backtrace (CPU 2), Frame : Return Address
0xffffff8108ce3670 : 0xffffff8018c1d626
0xffffff8108ce36e0 : 0xffffff7f994017f2
0xffffff8108ce37a0 : 0xffffff7f994fe3b9
0xffffff8108ce3800 : 0xffffff7f994fe42e
0xffffff8108ce3870 : 0xffffff7f99824c82
0xffffff8108ce39a0 : 0xffffff7f99524fe8
0xffffff8108ce39e0 : 0xffffff7f99409567
0xffffff8108ce3a90 : 0xffffff7f9940705a
0xffffff8108ce3c90 : 0xffffff7f99409160
0xffffff8108ce3d80 : 0xffffff7f9a5fac4b
0xffffff8108ce3de0 : 0xffffff7f9a5f7e82
0xffffff8108ce3e30 : 0xffffff7f9a5e1815
0xffffff8108ce3e60 : 0xffffff7f9a59d2ff
0xffffff8108ce3e80 : 0xffffff7f9a59e5f0
0xffffff8108ce3ed0 : 0xffffff7f9a59b96b
0xffffff8108ce3ef0 : 0xffffff80190467a8
0xffffff8108ce3f30 : 0xffffff80190452aa
0xffffff8108ce3f80 : 0xffffff80190453d9
0xffffff8108ce3fb0 : 0xffffff8018cb2977
      Kernel Extensions in backtrace:
         com.apple.NVDAResman(8.1)[A26D2A3D-C06F-3A0F-BCFF-901A98C93C3D]@0xffffff7f993a4 000->0xffffff7f996b1fff
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f992a3000
            dependency: com.apple.iokit.IONDRVSupport(2.3.7)[38C214C0-83C8-3594-8A4C-DC6AC3FEC163]@0xff ffff7f99390000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[74E3E50F-E50A-3073-8C96-06F854292A91]@0 xffffff7f9934d000
         com.apple.nvidia.nv50hal(8.1)[5F021999-8B18-3BD5-9B98-90617E638A63]@0xffffff7f9 96bf000->0xffffff7f999e0fff
            dependency: com.apple.NVDAResman(8.1.0)[A26D2A3D-C06F-3A0F-BCFF-901A98C93C3D]@0xffffff7f993 a4000
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f992a3000
         com.apple.GeForce(8.1)[A15BB65E-3501-340F-87CB-2FD2BAD33E35]@0xffffff7f9a595000 ->0xffffff7f9a661fff
            dependency: com.apple.NVDAResman(8.1.0)[A26D2A3D-C06F-3A0F-BCFF-901A98C93C3D]@0xffffff7f993 a4000
            dependency: com.apple.iokit.IONDRVSupport(2.3.7)[38C214C0-83C8-3594-8A4C-DC6AC3FEC163]@0xff ffff7f99390000
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f992a3000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[74E3E50F-E50A-3073-8C96-06F854292A91]@0 xffffff7f9934d000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
12D78
Kernel version:
Darwin Kernel Version 12.3.0: Sun Jan 6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64
Kernel UUID: 3EB7D8A7-C2D3-32EC-80F4-AB37D61492C6
Kernel slide:     0x0000000018a00000
Kernel text base: 0xffffff8018c00000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 131047881933
last loaded kext at 27964294567: com.apple.filesystems.smbfs          1.8 (addr 0xffffff7f9920d000, size 229376)
last unloaded kext at 113708455571: com.apple.driver.AppleUSBUHCI          5.2.5 (addr 0xffffff7f99c32000, size 65536)
loaded kexts:
com.logmein.hamachi          1.0
com.displaylink.driver.DisplayLinkDriver          2.0
com.apple.filesystems.smbfs          1.8
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.filesystems.autofs          3.0
com.apple.driver.AudioAUUC          1.60
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.driver.AppleHDA          2.3.7fc4
com.apple.driver.IOBluetoothSCOAudioDriver          4.1.3f3
com.apple.driver.IOBluetoothA2DPAudioDriver          4.1.3f3
com.apple.iokit.IOBluetoothSerialManager          4.1.3f3
com.apple.driver.AGPM          100.12.87
com.apple.GeForce          8.1.0
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.1.3f3
com.apple.driver.AppleUpstreamUserClient          3.5.10
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AppleMikeyDriver          2.3.7fc4
com.apple.driver.AppleIntelHDGraphics          8.1.0
com.apple.driver.AppleSMCPDRC          1.0.0
com.apple.driver.AppleMCCSControl          1.1.11
com.apple.driver.AppleSMCLMU          2.0.3d0
com.apple.driver.AppleMuxControl          3.3.0
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.AppleIntelHDGraphicsFB          8.1.0
com.apple.driver.ApplePolicyControl          3.3.0
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.driver.SMCMotionSensor          3.0.3d1
com.apple.driver.AppleUSBTCButtons          237.1
com.apple.driver.AppleUSBCardReader          3.1.7
com.apple.driver.AppleIRController          320.15
com.apple.driver.AppleUSBTCKeyboard          237.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          34
com.apple.iokit.SCSITaskUserClient          3.5.5
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.3.1
com.apple.driver.AppleUSBHub          5.5.5
com.apple.driver.AirPort.Brcm4331          614.20.16
com.apple.driver.AppleFWOHCI          4.9.6
com.apple.iokit.AppleBCM5701Ethernet          3.6.0b1
com.apple.driver.AppleAHCIPort          2.5.1
com.apple.driver.AppleUSBEHCI          5.5.0
com.apple.driver.AppleEFINVRAM          1.7
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleACPIButtons          1.7
com.apple.driver.AppleHPET          1.8
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.7
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.kext.triggers          1.0
com.apple.driver.DspFuncLib          2.3.7fc4
com.apple.iokit.IOAudioFamily          1.8.9fc11
com.apple.kext.OSvKernDSPLib          1.6
com.apple.iokit.IOSerialFamily          10.0.6
com.apple.nvidia.nv50hal          8.1.0
com.apple.NVDAResman          8.1.0
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.1.3f3
com.apple.iokit.IOSurface          86.0.4
com.apple.iokit.IOBluetoothFamily          4.1.3f3
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.driver.AppleSMBusController          1.0.11d0
com.apple.driver.AppleHDAController          2.3.7fc4
com.apple.iokit.IOHDAFamily          2.3.7fc4
com.apple.driver.AppleSMBusPCI          1.0.11d0
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.driver.AppleGraphicsControl          3.3.0
com.apple.iokit.IONDRVSupport          2.3.7
com.apple.iokit.IOGraphicsFamily          2.3.7
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.IOPlatformPluginFamily          5.3.0d51
com.apple.driver.AppleSMC          3.1.4d2
com.apple.driver.AppleUSBHIDKeyboard          170.2
com.apple.driver.AppleHIDKeyboard          170.2
com.apple.driver.AppleUSBMultitouch          237.3
com.apple.iokit.IOUSBHIDDriver          5.2.5
com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.5
com.apple.iokit.IOUSBMassStorageClass          3.5.1
com.apple.driver.AppleUSBMergeNub          5.5.5
com.apple.driver.AppleUSBComposite          5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.5
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOAHCISerialATAPI          2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.5
com.apple.iokit.IOUSBUserClient          5.5.5
com.apple.iokit.IO80211Family          522.4
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IOEthernetAVBController          1.0.2b1
com.apple.iokit.IONetworkingFamily          3.0
com.apple.iokit.IOAHCIFamily          2.3.1
com.apple.iokit.IOUSBFamily          5.5.5
com.apple.driver.AppleEFIRuntime          1.7
com.apple.iokit.IOHIDFamily          1.8.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          220.2
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          345
com.apple.iokit.IOStorageFamily          1.8
com.apple.driver.AppleKeyStore          28.21
com.apple.driver.AppleACPIPlatform          1.7
com.apple.iokit.IOPCIFamily          2.7.3
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0
Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i5, 2.4 GHz, 8 GB, SMC 1.58f16
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353237334248312D4346382020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353237334248312D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.16)
Bluetooth: Version 4.1.3f3 11349, 2 service, 18 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST750LX003-1AC154, 750.16 GB
Serial ATA Device: MATSHITADVD-R   UJ-898
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0xfa120000 / 5
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa130000 / 4
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 3
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8218, 0xfa113000 / 9
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0xfd110000 / 3

Visit The XLab FAQs and read the FAQ on diagnosing kernel panics.
This panic is a possible sign of a failing GPU in your computer. To see if that's the case I recommend you disconnect all third-party peripherals, then boot the computer into Safe Mode and operate to see if your panics continue. If they do then take the computer in for service. If they stop then uninstall the LogMein and Display LInk software using their uninstallers. Be sure the extensions they install are removed:
com.logmein.hamachi          1.0
com.displaylink.driver.DisplayLinkDriver          2.0
Alternatively, be sure they are upgraded to Mountain Lion compatible versions.

Problem with downloading apps. "Unable to download application" error.Help please!

I'm having a major issue with updating or downloading apps. They won't download! I try to download an app, it's says "waiting", then it looks like it's about to download. Then, suddenly, the "loading" bar gets halway filled, then it goes back to saying "waiting". This cycles about three or so times and then I get this message: "Unable to download application. Could not be downloaded at this time" with choices to be "done" or "retry".
I have tried EVERYTHING to fix this. I tried pausing the download and restarting, I tried soft and hard resets, I tried signing out and back into the App Store, I tried resetting my settings, I tried restoring the phone as a new iPhone, nothing works! I am at my wits end! I have an appointment at the Genius bar tomorrow, but I'm hoping someone here can help me so I won't have to keep that appointment. I've tried searching for my problem in the forums but none of the results are like mine. Could someone please help?
EDIT: I also tried checking the iTunes queue. No purchases are stuck in the queue.

Just wanted to update, since I can no longer edit my original post. I tried disabling bluetooth. That didn't do any good, either.

Unexpected Database Connector Error - Help please !!

Hi,
I am trying to use stored procedure in the crystal report, that comes bundled with RAD7. The following code I got from http://diamond.businessobjects.com/node/520 for using the stored procedure. I am getting 'UnexpectedQueryEngineError' on JRCCommunicationAdapter when trying to establish data connection to add the stored procedure to the report. I tried the same example above for adding table to the report by modifying 'Procedure' to 'Table' and it worked fine.
I really need to use the stored procedure in the report and get to have this working soon. Immediate help is greatly appreciated.
import java.io.IOException;
import com.crystaldecisions.sdk.occa.report.application.DatabaseController;
import com.crystaldecisions.sdk.occa.report.application.ReportClientDocument;
import com.crystaldecisions.sdk.occa.report.data.ConnectionInfo;
import com.crystaldecisions.sdk.occa.report.data.DBField;
import com.crystaldecisions.sdk.occa.report.data.FieldValueType;
import com.crystaldecisions.sdk.occa.report.data.Fields;
import com.crystaldecisions.sdk.occa.report.data.Table;
import com.crystaldecisions.sdk.occa.report.data.Procedure;
import com.crystaldecisions.sdk.occa.report.lib.PropertyBag;
import com.crystaldecisions.sdk.occa.report.lib.PropertyBagHelper;
import com.crystaldecisions.sdk.occa.report.lib.ReportSDKException;
public class AddSampleProcedure {
    public static void main(String[] args) throws ReportSDKException, IOException {
        ReportClientDocument clientDoc = new ReportClientDocument();
        clientDoc.setReportAppServer("inproc:jrc");
        // Open report
        clientDoc.newDocument();
        DatabaseController ctr = clientDoc.getDatabaseController ();
        Procedure table = new Procedure (); //Table table = new Table();
        String tableName = "Welcome"; //tableName = "Product";
        table.setAlias (tableName);
        table.setName (tableName);
        table.setQualifiedName (tableName);
        table.setDescription (tableName);
        /*Fields fields = new Fields ();
        DBField field = new DBField ();
        String fieldName = "product_name";
        field.setDescription (fieldName);
        field.setHeadingText (fieldName);
        field.setName (fieldName);
        field.setType (FieldValueType.stringField);
        field.setLength(255);
        fields.add (field);
        table.setDataFields (fields);*/
        String ServerName = serverName;
        String DatabaseName = dbName;
        String JDBC_URL=jdbcURL;
        String JDBC_Class = "oracle.jdbc.driver.OracleDriver";
        String UserName = userName;
        String Password = password;
        PropertyBag attrs = new PropertyBag();
        attrs.put(PropertyBagHelper.CONNINFO_DATABASE_DLL, "crdb_jdbc.dll");
        attrs.put(PropertyBagHelper.CONNINFO_SERVER_NAME, ServerName);
        attrs.put(PropertyBagHelper.CONNINFO_DATABASE_NAME, DatabaseName);
        attrs.put(PropertyBagHelper.CONNINFO_SERVER_TYPE, "JDBC (JNDI)");
        attrs.put(PropertyBagHelper.CONNINFO_JDBC_DATABASECLASSNAME, JDBC_Class);
        attrs.put(PropertyBagHelper.CONNINFO_JDBC_CONNECTION_URL, JDBC_URL);
        ConnectionInfo info = new ConnectionInfo ();
        info.setAttributes (attrs);
        info.setUserName(UserName);
        info.setPassword(Password);
        table.setConnectionInfo (info);
        ctr.addTable (table, null);
        clientDoc.saveAs("AddProcedure.rpt", "C:/Test", 1);
        System.out.println("Done");
Thanks in advance,
Lakshmi

Hi there,
I havent got any replies on the above exception and I am totally stuck. I thought I can provide more details on 'Unexpected Database Connector Error'. This is the exact place where it fails.
01 May 2008 14:20:17 [main] FATAL com.businessobjects.reports.sdk.JRCCommunicationAdapter - Request failed and JRC Command failed to be undone
01 May 2008 14:20:17 [main] ERROR com.businessobjects.reports.sdk.JRCCommunicationAdapter - JRCAgent1 detected an exception: Unexpected database connector error
     at com.crystaldecisions.reports.queryengine.driverImpl.o.eC(Unknown Source)
     at com.crystaldecisions.reports.queryengine.driverImpl.o.if(Unknown Source)
     at com.crystaldecisions.reports.queryengine.ax.if(Unknown Source)
     at com.crystaldecisions.reports.queryengine.bc.byte(Unknown Source)
     at com.crystaldecisions.reports.queryengine.bc.new(Unknown Source)
     at com.crystaldecisions.reports.queryengine.bc.for(Unknown Source)
     at com.crystaldecisions.reports.reportdefinition.datainterface.g.a(Unknown Source)
     at com.crystaldecisions.reports.reportdefinition.datainterface.m.new(Unknown Source)
     at com.crystaldecisions.reports.common.as.a(Unknown Source)
     at com.crystaldecisions.reports.common.ae.a(Unknown Source)
     at com.businessobjects.reports.sdk.b.k.a(Unknown Source)
     at com.businessobjects.reports.sdk.b.w.int(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ag.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.bu.if(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.bu.void(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.a6.for(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.u.performDo(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.u.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.DatabaseController.new(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.DatabaseController.addTable(Unknown Source)
Any idea on this exception and how to resolve it ?
Thanks

Multi Mapping - BPM - Block 1 ( No Agent ) Error -- Help Please ?

I am trying the the BPM scenario using Integration Process
BpmPatternCollectTime
from SAP BASIS ® SAP BASIS 7.00 in
the namespace http://sap.com/xi/XI/System/Patterns
I have done the scenario like the above . I have followed all the Steps which are used in above scenario.
I am using a File Sender Adapter and Receiver Adapter .
It is Successfully picked up the File but nothing is happening after that .
I am using two receiver Determination one from Ob to IP and other from IP to FIleReceiver ( IB) .
But, I am Getting error as Block1 (No agent) Error in the PE graphical diagram
I have checked in SWWL my Integration Process Return code is "0"
Can you please tell tell me how to solve this ?
Can you please tell me this scenario is like Multiple Purchase Order Items to One Purchase Order
Here they have given ID adn OverAllNumber . For ex. In one xml file I am sending
ID as A100
OverAllNumber as 120
next 5 minutes putting the another file with contents
ID as A100
OverAllNumber as 130
My Question is
Will TWO files wiil come as Output in File Receiver or one file merged as like follows ?
ID as A100
OverAllNumber as 120
ID as A100
OverAllNumber as 130
I am not Clear in this please give some suggestions .
Best Regards.,
V.Rangarajan

Hi Raj,
          Thanks for ur reply.
While defining the receiver determination, sender agreement, receiver agreeement , Interface determination which Interfaces areu using?
                   Yes
+ by the way which pattern u are following the basis component , is it BpmPatternCollectMessage?+
              No . I have taken example as
BpmPatternCollectTime
from SAP BASIS ® SAP BASIS 7.00
in the namespace http://sap.com/xi/XI/System/Patterns
I have done the scenario like the above . I have followed all the Steps which are used in above scenario.
The steps Which i have followed in BPM are
1. Block with Deadlkine branch and Exception handler( as TimeOut Exception)
Block Start and Block End as New Transaction
2. Inside Block infinite Loop which contains Receive step ( Actives the Correlation ) and Multiline Container element which appends the Messages with CollectMessage
3. Transformation Step
It creates the New Transaction and Interface Maping from CollectMessage List to New Mesage
4. Send Step
               It sends the New Message . It creates the New Transaction .
Best Regards .,
V.Rangarajan

Itunes was not installed correctly error 7 windows error 126. I have tried 3 or 4 times with the same result. I have deleted a previous version and tried a fresh install. I still get the same error. help please!

I have tried to dowload and update itunes on my PC. I have had an error message error 7 (windows error 126) several times. I have deleted the previous version of itunes and tried a clean install, with the same result. What am i doing wrong????

Hi DavidTPerrett!
I have an article for you that will help you troubleshoot this issue:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Thanks for using the Apple Support Communities!
Cheers,
Braden

I created my first program-compiling error-help please

hey there
i just wanted my first program in java and here it is below with the eroor when i'm compiling it, i cant understand whats wrong:
public class SquareArea {
     public static void main(String[] args); {
     float length;
     float width;
     float SquareArea;
     System.out.println ("Please enter length"+ length);
     System.out.println ("Please enter width"+ width);
     SquareArea= length*width;
     System.out.println ("The area of the square is" + SquareArea);
The error is:C:\Documents and Settings\User\Desktop\SquareArea.java:5: missing method body, or declare abstract
     public static void main(String[] args); {
^
1 error
Tool completed with exit code 1

There shouldn't be a semicolon between the ")" and the "{" near the end of that line.
With that semicolon, you're basically defining an empty, zero-size main method, and then throwing a bunch of garbage after it. That's what the compiler thinks anyway. Remove that semicolon and it should compile OK.
But it won't work super well, because you're not actually getting any input for length and width. It's just going to output this:
Please enter length0
Please enter width0
The area of the square is0

Beginner - Flat file upload error Help Please

Hi Everyone,
I am trying to upload a flat file [.csv] for the first time.
I created Info objects Material Id, Material Name , Price as keyfigure.
Material Id holds Material Name and Price as attributes and is With Text and With Master Data.
For the Keyfigure, Price, I have selected Amount and defined as USD.
In the flat file, i have Material id, Material Name, Price, Description for Text, its something like this
Mid         M-Name   Price      DESCRIPTION
10001     A              99.99     AA
When I create an Application Component and thereafter create a data source for master data attributes for Material
and select the flat file and upload it, then the data types for Keyfigure PRICE changes to FLTP Length 16, its no longer as DEC and i get some werid data for Price field, something like
"99.990000000001E+02" instead of 99.99.   Why am I having this problem and how could this be resolved ?
I thought i would start off with my best foot forward but it didnt work. Any kind of help would be highly appreciated. Thanks guys..Byee

hi,
these are the BI.7 steps
BW 7.0
Uploading of master data
Log on to your SAP
Transaction code RSA1u2014LEAD YOU TO MODELLING
1. Creation of Info Objects
u2022 In left panel select info object
u2022 Create info area
u2022 Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
u2022 Create new characteristics and key figures under respective catalogs according to the project requirement
u2022 Create required info objects and Activate.
2. Creation of Data Source
u2022 In the left panel select data sources
u2022 Create application component(AC)
u2022 Right click AC and create datasource
u2022 Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
u2022 In general tab give short, medium, and long description.
u2022 In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
u2022 In proposal tab load example data and verify it.
u2022 In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
u2022 Activate data source and read preview data under preview tab.
u2022 Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
u2022 In left panel select info provider
u2022 Select created info area and right click to select Insert Characteristics as info provider
u2022 Select required info object ( Ex : Employee ID)
u2022 Under that info object select attributes
u2022 Right click on attributes and select create transformation.
u2022 In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
u2022 Activate created transformation
u2022 Create Data transfer process (DTP) by right clicking the master data attributes
u2022 In extraction tab specify extraction mode ( full)
u2022 In update tab specify error handling ( request green)
u2022 Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. Alternatively monitor icon can be used.
BW 7.0
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1u2014LEAD YOU TO MODELLING
5. Creation of Info Objects
u2022 In left panel select info object
u2022 Create info area
u2022 Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
u2022 Create new characteristics and key figures under respective catalogs according to the project requirement
u2022 Create required info objects and Activate.
6. Creation of Data Source
u2022 In the left panel select data sources
u2022 Create application component(AC)
u2022 Right click AC and create datasource
u2022 Specify data source name, source system, and data type ( Transaction data )
u2022 In general tab give short, medium, and long description.
u2022 In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
u2022 In proposal tab load example data and verify it.
u2022 In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
u2022 Activate data source and read preview data under preview tab.
u2022 Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
7. Creation of data targets
u2022 In left panel select info provider
u2022 Select created info area and right click to create ODS( Data store object ) or Cube.
u2022 Specify name fro the ODS or cube and click create
u2022 From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
u2022 Click Activate.
u2022 Right click on ODS or Cube and select create transformation.
u2022 In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
u2022 Activate created transformation
u2022 Create Data transfer process (DTP) by right clicking the master data attributes
u2022 In extraction tab specify extraction mode ( full)
u2022 In update tab specify error handling ( request green)
u2022 Activate DTP and in execute tab click execute button to load data in data targets.
8. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used
if it is helpful assign points
cheers
sivaRaju

Communication Channel Error: Help Please.

Dear SAP Friends,
May I ask how do I go about resolving the error message I have right now with my two communication channels:
Configuration error:
com.sap.aii.af.service.util.configuration.Configuration.ExceptionSet:The following configuration errors were detected:
-Error creating archive directory 'd:\<Folder1>\<Folder2>\<Folder3)\
Your prompt response is greatly appreciated. Thank you very much in advance!
Best Regards,
Albert

Hi,
As said above you should check your writing rights. You should use a username which have the rights to write on the given location.
I hope it will solve your problem. If it solved it please mark your question as answered.
Best Regards

Partition of FW HD error. Help please.

Similar Messages

Maybe you are looking for