Partner application configuration is missing error on SSO login page

We have APEX 3.1.2 setup as a partner application and an application within APEX setup to use SSO for authentication. Following a link to the APEX application redirects to the Single Sign-On page, as it should, but it also shows "Error: The partner application configuration is missing or expired." I type in my password and username, click the Login button, and (if I entered my username and password correctly, of course!) then the APEX application is shown. So, I cannot figure out why we're getting the no_papp_err error and I have not found any solutions to that issue on Metalink or anywhere else on the Internet. Any ideas? I'm concerned that we have a misconfiguration somewhere that is causing this error and will affect any other partner application we setup in the future.
We're on Oracle Portal 10.1.4, SSO 10.1.2, and SSL is setup on both infra and mid tiers.

Did you try checking the partner application entries on the SSO-login server page?
please login as orcladmin or some other user with membership in, i beleive, iasadmins group. verify that for this partner application, what you see here corresponds to the application URL. it looks like your login page call may have issues. so check for login url too.
also check the ORASSO.WWSSO_LS_CONFIGURATION_INFO$ for entries corresponding to Apex application.

Similar Messages

Error: Partner application configuration is missing ... on SSO login page

We have APEX 3.1.2 setup as a partner application and an application within APEX setup to use SSO for authentication. Going to the APEX application redirects to the Single Sign-On page, as it should, but it also shows "Error: The partner application configuration is missing or expired." I type in my password and username, click the Login button, and (if I entered my username and password correctly), it redirects me to the APEX application just like it should. So, I cannot figure out why we're getting the no_papp_err error and I have not found any solutions to that issue on metalink or anywhere else on the Internet. Any ideas?
We're on Oracle Portal 10.1.4, SSO 10.1.2, and SSL is setup for both.
+Closing this topic and opening it in [Oracle Application Server - General|http://forums.oracle.com/forums/thread.jspa?threadID=832022&tstart=0|New Topic]+
Edited by: oportalist on Nov 28, 2008 10:24 AM

Did you try checking the partner application entries on the SSO-login server page?
please login as orcladmin or some other user with membership in, i beleive, iasadmins group. verify that for this partner application, what you see here corresponds to the application URL. it looks like your login page call may have issues. so check for login url too.
also check the ORASSO.WWSSO_LS_CONFIGURATION_INFO$ for entries corresponding to Apex application.

Wwc- 41653 The partner application configuration is missing or expired.

We have the following scenerio.
Application server 9iR1, apache server, login server, portal3.0.9.8.4 on 9iR2 database on host A. There is another database in 9iR2 where portal3.0.9.8.4 installed on host B. I want to use this database for another website configuring apache on host A as virtual host. I want to use same login server on host A.
The website on host A is working fine while the website on host B does not allow me to log into the login server.
I have run ssodatan script for associating portal schema on host B. I have created partner application on host A portal for accessing portal on host B and run ssodatax script for associating partner application.
when I try to log into the another web site created for host B, I get portal welcome page. when I click on login, I get sso page but i am unable to log into it, getting error The partner application configuration is missing or expired. Please contact the administrator. (WWC-41653)
How to resolve this?

Were you able to resolve the issue???
Can you pls try Rerunning ssodatan/x with the correct data. The ssodatan script is located in the directory ORACLE_HOME/portal30/admin/plsql/ssodatan.
Refer following link for more info on SSODATAN , SSODATAX and DIAGNOSTICS scripts in Portal 3.0.x:
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=136138.1

The partner application configuration is missing

Trying to login to portal with portal30 leads to
'The partner application configuration is missing or expired. Please contact the administrator. (WWC-41653)'
Please advise
db 8.1.7
portal 3.0.9
apserver 1.0.2.1
Thank you
Anatoliy Smirnov

Were you able to resolve the issue???
Can you pls try Rerunning ssodatan/x with the correct data. The ssodatan script is located in the directory ORACLE_HOME/portal30/admin/plsql/ssodatan.
Refer following link for more info on SSODATAN , SSODATAX and DIAGNOSTICS scripts in Portal 3.0.x:
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=136138.1

Unexpected error in SSO login page

Hi all,
We have a problem with our SSO, or with our LDAP directory, or with the way in which they work, not sure about. In the past we were using version 9.x and everything worked fine. Now we migrated to version 10.1.2.0.2 and we discovered that using the same functionality to register and log user is crashing. After a bit of debugging, the problem seems to be that the PASSWORD of the created users is encrypted using some Hash and retrieve in an array of bytes, insted of in plain text as before. In principle this shouldn't affect the way in which we use the LDAP & SSO, but for some reason, when the user tries to log in using the recently created user account and password, the SSO login page gives an "unexpected error" message. The SSO login page is the original page coming with the SSO infrastructure, no change at all on it.
Any idea why this might happened? Is the some way to configure the SSO or the LDAP so they don't encrypt the user password? Any other possible config detail that we should check?
Thanks in advance,
Luis

So after finding the log files on our SSO server, I found out the exact error message that the SSO was throwing was that the account was still not activate!!! Then I realized that we started to make use of the "Start date" LDAP field recently, and event when the date was set to the current date when the account was created, the time was set to 0s, event when the current time was also passed to the LDAP. I don't know what's the reason why the LDAP didn't get our time, passing the date-time with the format the LDAP was asking for (yyyyMMddHHmmssz), but just by rolling one day back the start date, the user accounts were automatically activate when they're creating, solving our problem.
Regards,
Luis
Edited by: lagh on Dec 15, 2008 11:52 AM

Error in SSO login page.

HI all,
This time in windows 2000 Professional,I install infrastructure without error or warning(But in the installation log file I saw one error i.e., as follows.)(I put th error line into bold face.)
Create Group URLrefreshed:oiddas/ui/oracle/ldap/das/admin/AppCreateGroupInfoAdmin
Edit Group URL refreshed:oiddas/ui/oracle/ldap/das/admin/AppEditGroupAdmin
Delete Group URL refreshed:oiddas/ui/oracle/ldap/das/admin/AppDeleteGroupAdmin
Group LOV URL refreshed:oiddas/ui/oracle/ldap/das/search/LOVGroupSearch
People Search URL refreshed:oiddas/ui/oracle/ldap/das/search/AppUserSearch
Directory Administration URL
refreshed:oiddas/ui/oracle/ldap/das/mypage/ViewMyPage
Local OID cache refreshed
PL/SQL procedure successfully completed.
Disconnected from Oracle9i Enterprise Edition Release 9.0.1.4.0 - Production
With the Partitioning option
JServer Release 9.0.1.4.0 - Production
NLS_LANG character set = UTF8
NLS_LANG param = AMERICAN_AMERICA.UTF8
Portal SMI: Oracle home: D:\ocsinfra was registered.
Portal SMI: ERROR: Web DAV: /dav_portal/orasso could not be found.
Portal SMI: Update config was successful.
Portal SMI: Save changes was successful.
Portal SMI: Updated DAD: /pls/orasso
Portal SMI: Terminating.
Portal SMI: Terminated in: 20 milliseconds.
D:\ocsinfra\jdk\bin\java -jar D:\ocsinfra\jlib\emConfigInstall.jar targets D:\ocsinfra\sso\sso_server_target2add.xml
End output from spawned process.
Configuration assistant "Single Sign-On Configuration Assistant" succeeded
Result code for launching of configuration assistant is: 0
Launched configuration assistant 'Patch SSO'
Tool type is: Optional.
The command being spawned is: 'D:\ocsinfra/sso/bin/ssoca.bat patch D:\ocsinfra'
Start output from spawned process:
Parameters passed to ssoca : param0:patch param1:D:\ocsinfra
INSTALL_ACTION: SSOConfigAssistant: Install Mode is PATCH
INSTALL_ACTION: SSOConfigAssistant: SSO configuration status valid
INSTALL_ACTION: SSOConfigAssistant : Invoking sqlplus
D:\ocsinfra\bin\sqlplus ORASSO/*****@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=esysocs2)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=iasdb.esysocs2))) @D:\ocsinfra\sso\admin\plsql\sso\ssopachk.sql
SQL*Plus: Release 9.0.1.4.0 - Production on Mon Feb 13 12:04:39 2006
(c) Copyright 2001 Oracle Corporation. All rights reserved.
SQL> Connected.
SQL> Checking current SSO Server version...
INFO: SSO Server version : 9.0.2.2.22
INFO: SSO Server version to be checked: 9.0.2.2
INFO: SSO Server version check ok
INFO: SSO patch check status : 0
PL/SQL procedure successfully completed.
Disconnected from Oracle9i Enterprise Edition Release 9.0.1.4.0 - Production
With the Partitioning option
JServer Release 9.0.1.4.0 - Production
INSTALL_ACTION: SSOConfigAssistant: Invoking sqlplus
D:\ocsinfra\bin\sqlplus ORASSO/*****@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=esysocs2)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=iasdb.esysocs2))) @D:\ocsinfra\sso\admin\plsql\sso\ssopatch.sql
SQL*Plus: Release 9.0.1.4.0 - Production on Mon Feb 13 12:04:42 2006
(c) Copyright 2001 Oracle Corporation. All rights reserved.
SQL> Connected.
SQL> Calling ssopatch.sql
Oracle 9iAS Single Sign-On Server
Loading Package(s)...
Package created.
No errors.
.After that i go to address http://esysocs2:7777/oiddas. Off this point when i click on login all addresses on Address bar covert to http://esysocs:7777/oiddas/....(remind of the system name). In otherwords "esysocs2" changes to "esysocs".i also tried again by using IP address of my machine(which is static). At this time i receive page "Single Sign On" with ERROR :Unexpected errors (WWC-41400).( this is the situation when creating the new oid users)
Q 1)Is this error( i.e.,ERROR :Unexpected errors (WWC-41400)) is effected by the error showed as bold face in the above log file?describe me when that log file error(i.e., Portal SMI: ERROR: Web DAV: /dav_portal/orasso could not be found will occurs(I mean in which situation?)
In services window, Oracle OLAP 9.0.1.0.1,OracleOCSInfra_homewebcachemon services are not starting when i attempted to start. I installed the infrastructure 8or 9 times in this week. Every installation time it is same that services are not starting and the error in SSO page.
Q 2) Why these services are not starting for me? Is the services basically doesn't start or any mistakes i did in the installation process? ( I know i didn't do any mistake at the installation time.) describe me when these services needed and how to start those sevices if necessary?
One more thing is which password we will enter when we attemp for the first time on the SSO. In manuals it is saying that "enter the oid username and the password". At first, in installation time we didn't create the oid users. By default what is the oid username and the password.
Q 3) What is the default OID & SSO username and the password.
>>>> Please solve my problem waiting for the replies eagerly.
with thank in advance./kumaraswamy.n

I solved all my problems By setting the domain name to my system and using the windows 2003 server.

LOGIN ERROR: "The partner application configuration is missing or expired."

"portal" login pswd had expired and I changed it a) via OEM under "configure schema" section anb b) under HTTP->PL/SQL Properties section. I also went to OIDADMIN and changed the "portal" user pswd to the same schema pswd used above. However, now when logging in with the "portal" ID I'm getting the error above. Does anyone have any idea what this is and what I should do? THANKS!

hi
have you ran any scripts or did you change your system dates after the installation.
Regards
Deepak

ORA-06502 error after SSO login

Hi all.
In our intranet i'm trying to use the AS 10g SSO
as authentication with my HTML DB application.
HTML DB is into a 9.2.0.4 database in a Alpha open VMS server.
AS 10g infrastructure and AS 10g mid-tier on two difference Linux RedHat AS 2.1 servers.
Infrastructure server: http://giedi.marinarinaldi.it:7779
Mid-tier server: http://si.marinarinaldi.it:7778
HTML DB application: http://si.marinarinaldi.it:7778/pls/htmldbSVIL/f?p=106:1
I followed the related how-to document
and the SSO login page shows correctly
but when i click "login":
Error     Error determining caller of process_success:l_owner::p_partner_app_name:HTML_DB Please contact administrator.
ORA-06502: PL/SQL: numeric or value error: character to number conversion error
The SSO logi page is a our custom login page
but it works perfectly with portal.
The SSO partner application parameters:
ID:     97F428BC
Token:     4PW44GF797F428BC
Encryption Key:     12E3971BE26C4E5D
Login URL:     http://giedi.marinarinaldi.it:7779/pls/orasso/orasso.wwsso_app_admin.ls_login
Single Sign-Off URL:     http://giedi.marinarinaldi.it:7779/pls/orasso/orasso.wwsso_app_admin.ls_logout
Name:     HTML_DB
Home URL: http://si.marinarinaldi.it:7778/pls/htmldbSVIL/f?p=106:1
Success URL: http://si.marinarinaldi.it:7778/pls/htmldbSVIL/wwv_flow_custom_auth_sso.process_success
Logout URL: http://si.marinarinaldi.it:7778/pls/htmldbSVIL/htmldb
The parameters of regapp.sql script on the Alpha HTMLDB database:
Enter value for listener_token: HTML_DB:si.marinarinaldi.it:7778
Enter value for site_token: 4PW44GF797F428BC
Enter value for site_id: 97F428BC
Enter value for login_url: http://giedi.marinarinaldi.it:7779/pls/orasso/orasso.
wwsso_app_admin.ls_login
Enter value for cookie_version: v1.0
Enter value for encryption_key: 12E3971BE26C4E5D
Enter value for ip_check: N
Thank you all in advance for help.

SQL> select * from WWSEC_SSO_LOG$;
1
entry: papp_show_config
05-AUG-04
2
IN papp_show_config: after the select.
05-AUG-04
3
site name is 4PW44GF797F428BC
05-AUG-04
4
exit: papp_show_config
05-AUG-04
5
entry: urlencode
05-AUG-04
6
encoded URL is http%3A%2F%2Fsi.marinarinaldi.it%3A7778%2Fpls%2FhtmldbSVIL%2Ff%3F
p%3D106%3A1%3A6300852000501899701
05-AUG-04
7
exit: urlencode
05-AUG-04
8
entry: urlencode
05-AUG-04
9
encoded URL is http%3A%2F%2Fsi.marinarinaldi.it%3A7778
05-AUG-04
10
exit: urlencode
05-AUG-04
11
entry: encrypt_url_cookie
05-AUG-04
12
Before bake_site2pstore_token: listener token: HTML_DB:si.marinarinaldi.it:7778u
rlcookie_version: v1.0papp_url_cookie: http%3A%2F%2Fsi.marinarinaldi.it%3A7778%2
Fpls%2FhtmldbSVIL%2Ff%3Fp%3D106%3A1%3A6300852000501899701~http%3A%2F%2Fsi.marina
rinaldi.it%3A7778enabler_config.site_token: 4PW44GF797F428BCkey: 12E3971BE26C4E5
D
05-AUG-04
13
entry: bake_site2pstore_token
05-AUG-04
14
entry get_enabler_config
05-AUG-04
15
site token is 4PW44GF797F428BC
05-AUG-04
16
exit: get_enabler_config
05-AUG-04
17
In hash string. Input is 308-05-2004 10:06:52
05-AUG-04
18
In hash string. Input is ud)xc`8L`GJd~4PW44GF797F428BC~20040805100652~http%3A%2F
%2Fsi.marinarinaldi.it%3A7778%2Fpls%2FhtmldbSVIL%2Ff%3Fp%3D106%3A1%3A63008520005
01899701~http%3A%2F%2Fsi.marinarinaldi.it%3A7778
05-AUG-04
19
temp site2pstoretoken is :ud)xc`8L`GJd~4PW44GF797F428BC~20040805100652~http%3A%2
F%2Fsi.marinarinaldi.it%3A7778%2Fpls%2FhtmldbSVIL%2Ff%3Fp%3D106%3A1%3A6300852000
501899701~http%3A%2F%2Fsi.marinarinaldi.it%3A7778~5169F5D95694EE7F4EEC7D80056B56
A5
05-AUG-04
20
entry: encrypt_des
05-AUG-04
21
Key is: 12E3971BE26C4E5D
05-AUG-04
22
before rpad
05-AUG-04
23
pre mask: 503504C465CC51FDD7EBB62850973AF1503504C465CC51FDD7EBB62850973AF1503504
C465CC51FDD7EBB62850973AF1503504C465CC51FDD7EBB62850973AF1503504C465CC51FDD7EBB6
2850973AF1503504C465CC51FDD7EBB62850973AF1503504C465CC51FDD7EBB628
05-AUG-04
24
post mask: 45FBB10E9AABB801ABAC1C861EBF9AE645FBB10E9AABB801ABAC1C861EBF9AE645FBB
10E9AABB801ABAC1C861EBF9AE645FBB10E9AABB801ABAC1C861EBF9AE645FBB10E9AABB801ABAC1
C861EBF9AE645FBB10E9AABB801ABAC1C861EBF9AE645FBB10E9AABB801ABAC1C86
05-AUG-04
25
exit: bake_site2pstore_token
05-AUG-04
26
After bake_site2_pstore_token. Value is: C061F10FBDDAACCB4A5B536D036656AF013D33B
17261B66BD9C46A02004CF08081B0EB68834FA1594884A2088A6E1829A35EEA97ECF7B0F9B728B60
B7DDEFEC846EA96CDB4208783B26F7DE976B3E7912554A8FA2B383EBF0C4221858C88B10A00A2789
65C85703BEF6C3C1E3F069FF9C41059B5982CBADB7F662D481C9812EBCD7B44A7E24819CD152BB29
9F2B40F08138F7DAE05BCC58CF87FECFA89B1BEE195FB2A314699AA2C8D406AC52FCE4F5B6DCE910
A4B31714D99918BEC39E3E067BE031F5E9DF031192064B1ECAE0B100775AD76EF4D478844
05-AUG-04
27
Redirect URL generated is : http://giedi.marinarinaldi.it:7779/pls/orasso/orasso
.wwsso_app_admin.ls_login?site2pstoretoken=v1.0~97F428BC~C061F10FBDDAACCB4A5B536
D036656AF013D33B17261B66BD9C46A02004CF08081B0EB68834FA1594884A2088A6E1829A35EEA9
7ECF7B0F9B728B60B7DDEFEC846EA96CDB4208783B26F7DE976B3E7912554A8FA2B383EBF0C42218
58C88B10A00A278965C85703BEF6C3C1E3F069FF9C41059B5982CBADB7F662D481C9812EBCD7B44A
7E24819CD152BB299F2B40F08138F7DAE05BCC58CF87FECFA89B1BEE195FB2A314699AA2C8D406AC
52FCE4F5B6DCE910A4B31714D99918BEC39E3E067BE031F5E9DF031192064B1ECAE0B100775AD76E
F4D478844
05-AUG-04

How to pass parameter from SSO login page to ADF application page?

We have ADF-JSF application (running on AS 1013) that is being protected by OID running on AS 1012. SSO login page contains (among others) paramter ssousername and I wish to pass this to my ADF application. For the testing purpose I created ADF application entry point page that has something like this:
<h:outputText value="#{param.ssousername}"/>and my sso login page has:
<input type="text" size="30" maxlength="50" name="ssousername" value="<%=str_user%>">OID and ADF OC4j are running on two different servers, same network.
So after successful login, when my page displays param passed is NULL?!
Why?

I solved it with the following....when my page loads, I execute test method:
    public void processLogin(String ssousername) {
         Object o = JSFUtils.getUserFromSSOLogin();
         if (o!=null) System.out.println(o.toString());
    public static Object getUserFromSSOLogin(){
        FacesContext ctx = FacesContext.getCurrentInstance();
        return ctx.getExternalContext().getRemoteUser();
    }

APEX 3.2 Associating application with SSO login page.

Hi
My requirement is to replace my login page of APEX3.2 application with an SSO login page. Also, the application uses some tables with some history columns like: "Last Updated by", "Created by", "Last Update Time", etc... While create/edit of any table, I want these columns to be automatically populated according to the credentials used in SSO login page to that application. Please help.
The link given on this forum (http://www.oracle.com/technology/products/database/application_express/howtos/sso_partner_app.html) for the purpose seems to be obsolete i.e. for previous versions of APEX.
Thanks
Bhavesh

Bhavesh,
That how-to explains all the steps you need to set up SSO with Application Express.
As far as the audit columns, just create triggers on your tables. Referenced v('APP_USER') to get the authenticated username.
Scott

SSO login page - SSL

Hello all,
we have full insatllation of OAS 10G (BI + INFRA, both on 1 server), there are more than 3000 employees using the implemented SSO to login to more than 40 web applications running on more than one server (some as external applications, some on the same server), and we have another installation on the same server which is "SOA Suite OC4J 10.1.3" integrated with the installed INFRA as partner application to utilize the OID authentication through SSO. and 2 Ebusiness suite installations on 2 other servers.
now for some reason, our top management asks to make the SSO login page to run under HTTPS protocol (SSL).
can you help out? what is the impact as we have that number of applications? is there any useful documents?
thanks,
Sallloum
Edited by: user7813970 on May 17, 2010 11:45 PM

The obvious reason to have this arrangement is to get increased security.
Now SSL implementation on OAS-BI, EBS and SOA Suite should be carefully planned. It needs to be clear what has to be under SSL: SSO or the whole suite of applications. In general, both ways are possible. But each component can be configured for SSL.
Please note, any changes in configuration here will affect configurations of all applications that are using it.
Read administration documents for details on each parts configuration with SSL. For SSO, here is the document to follow.
http://download.oracle.com/docs/cd/B14099_19/idmanage.1012/b14078/ssl.htm#sthref311
Also check metalink for additional resources.
thanks,
AMN

OAM SSO login page language

Hi,
I have an application that is authenticated using the SSO component of OAM 11.1.1.3. The application uses mod_osso for authentication and redirection to the SSO login page.
My application is available in multiple languages, the end user selects the required language using a drop-down list on the landing page. However, when he/she is redirected to the SSO login page, it is always in english. From what i can see, the SSO page uses the browser settings to determine which language to display. Is there something i can do on the application side to force the SSO page to use the same language that the user selected from my application.
I have read the "Internationalization and Multibyte Data Support for OAM 10g WebGates" chapter of the Identity Management documentation, it lists the available languages, but doesnt specify any way of over-riding the browser settings.
Thanks a lot,
Edited by: noshea on Apr 27, 2011 2:09 PM

Joe wrote:
Hello,
I have configured OAM with OID as the datastore. I have a password policy in OID such that if the user enters a wrong password more than 3 times then > the account is locked for a specific interval.
OAM has its own password management feature, it is not smart enough to understand that the policy is in OID. You can write custom plugins to help solve that problem or you can use OAM's LPM. http://download.oracle.com/docs/cd/E15217_01/doc.1014/e12489/whatsnew.htm#CHDCFDEH

Issue in redirecting to portal page from SSO login page

HI facing issue while redirecting to portal application from SSO login page.please find below basic details
the application comprises of TAM / Apache / Weblogic, and all the request goes in the same order.
When the application is deployed as portlet, the jsp page some how hard codes the apache host name, that in turn blocks any form submit or Ajax action.
so on successful login the redirection is not happening to required portal page as it includes apache host name in the url consrtucted.
Please suggest me what are the configurations that I need to verify .
Thanks in Advance
Jetti.

If you upgrade to v7.1 you will have all those features and more - PLUS a lot of defective pieces have been fixed in 7.1

How to change the behaviour of the Cancel-Button of SSO-Login-Page (Forms)?

Hi Folks,
we use SSO-Login to authenticate users using Forms. How do I change the URL which is opened when a user clicks on the cancel button on the SSO Login page?
In the formsweg.cfg file there is a parameter named ssoCancelUrl, but if I define it, it doesn't work anyway. Seems like it has something to do with ssoDynamicResourceCreate, but I don't exactly understand what.
Can't I simply change the URL which is opened (globally), when a user hits the cancel button on any SSO-Loginpage.
Thanks in advance.
Regards.

Exactly this does not work! Please watch my settings:
Global Setting in formsweb.cfg
# Single Sign-On OID configuration parameter: indicates whether we allow
# dynamic resource creation if the resource is not yet created in the OID.
ssoDynamicResourceCreate=false
# Single Sign-On parameter: URL to redirect to if ssoDynamicResourceCreate=false
ssoErrorUrl=
# Single Sign-On parameter: Cancel URL for the dynamic resource creation DAS page.
ssoCancelUrl=
# Single Sign-On parameter: indicates whether the url is protected in which
# case mod_osso will be given control for authentication or continue in
# the FormsServlet if not. It is false by default. Set it to true in an
# application-specific section to enable Single Sign-On for that application.
ssoMode=false
App-Specific settings in formsweb.cfg
[proz]
envFile=proz.env
form=proz.fmx
title=proz
separateFrame=true
width=1280
height=960
ssoMode=true
ssoDynamicResourceCreate=false
ssoCancelURL=http://machinename:port/zugangsportal/
otherparams=useSDI=yes P_SERVER_URL=machinename:port P_REP_SERVERNAME=machinename_proz ZP_TARGET_ID=%ZP_TARGET_ID%
When I now access http://machinename:port/forms/frmservlet?config=proz I got redirected to the SSO-Login-Page but the Cancel-Button still links to Middletier Home. Why?
Regards.

Internal Server Error while accessing login page.

Hi,
We have recently upgraded our database from 9.2.0.8 to 11.2.0.3 on AIX 6.1 platform (EBS version 11.5.10.2). We are not able to get the login page and receiving Internal Server Error on the login page without any error messages.
On checking we have found following errors in mod_jserv.log:
[25/10/2013 05:53:42:935] (ERROR) ajp12: Servlet Error: java.lang.NoClassDefFoundError: oracle/apps/fnd/sso/SessionMgr: oracle/apps/fnd/sso/SessionMgr
[25/10/2013 05:53:42:935] (ERROR) an error returned handling request via protocol "ajpv12"
[25/10/2013 05:53:42:935] (INFO) balance: continuing to ibmapptest:16070
[25/10/2013 05:53:42:935] (ERROR) balance: 12386336 internal servlet error in server ibmapptest:16070
[25/10/2013 05:53:42:935] (ERROR) an error returned handling request via protocol "balance"
We tried clearing the cache directories and bounced Apache but that dint help.
Why would we be receving this error and how to resolve it?

OK, this is an all too common issue - the logs are insufficient so you may well have to try some extra debugging to properly understand the problem.
If you have Metalink access try this: NOTE.249669.1 How To Collect Apache and Jserv Debugging
Basically, you should do the following - and maybe upload the logs here if you want to. I assume you are on 11.5.10. If not, then amend as appropriate:
Enable de-bug for Apache and Jserv:
1. Shut down the oracle application server.
2. Backup or change the name of the following files:
IAS_ORACLE_HOME/Apache/Apache/logs/error_log
IAS_ORACLE_HOME/Apache/Apache/logs/error_log_pls
IAS_ORACLE_HOME/Apache/Apache/logs/access_log
IAS_ORACLE_HOME/Apache/Jserv/logs/mod_jserv.log and jserv.log
After making a copy of these files or after renaming them, please delete
them from these directories. This enables new log files to be created
when the applications server is restarted and will help you to focus on
the current problem.
3. Enable debug logging for Apache
Update IAS_ORACLE_HOME/Apache/Apache/conf/httpd.conf to set the LogLevel parameter:
LogLevel debug
4. Enable debug logging for Jserv and mod_jserv
a) Update iAS_ORACLE_HOME/Apache/Jserv/etc/jserv.conf to set ApJServLogLevel parameter to:
ApJServLogLevel debug (from warn)
b) Update iAS_ORACLE_HOME/Apache/Jserv/etc/jserv.properties to set the
log=true
log.channel.info=true
5. Enable debugging in ssp_init.txt
Update iAS_ORACLE_HOME/Apache/Jserv/etc/ssp_init.txt to add Debug:
DebugLevel=5
DebugSwitch=ON
6. Please re-start the application server
7. Reproduce the problem
8. Upload the following files:
IAS_ORACLE_HOME/Apache/Apache/conf/apps.conf and httpd.conf
IAS_ORACLE_HOME/Apache/Apache/logs/error_log_pls
IAS_ORACLE_HOME/Apache/Apache/logs/error_log and access_log
IAS_ORACLE_HOME/Apache/Jserv/logs/mod_jserv.log and jserv.log
IAS_ORACLE_HOME/Apache/Jserv/logs/jvm (all files in this directory)
DA

Partner application configuration is missing error on SSO login page

Similar Messages

Maybe you are looking for