Partner profile value for XI system

I got a outbound message with partner profile value as
<SAP:SNDPOR>XIDEV</SAP:SNDPOR>
<SAP:SNDPRN>XiALE01</SAP:SNDPRN>
<SAP:SNDPRT>LS</SAP:SNDPRT>
Where do I go and change the SNDPRN value in SLD? or is it SLD I change it. SAP R3 is looking for sender partner profile in caps. How to change this value in XI
thanks

Hi,
Please update few things.
1. Since it is an outbound from XI into another R/3 machine, I would first suggest you to check IDOC posted in R/3 which has an error message tagged to it. This is applicable only when Message went from XI into R/3 and we see an error in the SXMB_MONI as RFC destination not found etc.,.
In such a case, IDOC error message with 53/51 etc, will post an error message like "SENDER NOT IDENTIFIED". This SENDER and RECEIVERs can be seen in the CONTROL RECORD of the IDOC.
From R/3, use transaction WE02/WE05 and locate your IDOC (normally in the OUTBOUND folder on left, look at last few messages which have RED TRAFFIC SIGNAL and match the partners).
To resolve this, create the RFC PORT first. XIDEV using WE21 referring to your XI client. The prerequisite for this is to have a RFC destination already created to port XI and a logical system (BD54 transaction).
Create a Logical System (Business Partner) of type LS using WE20 and (Logical system you have created or identified in BD54) should be configured as you want.
This should resolve your issue.
2. If the issue is with XI and message is not seen in R/3, make sure you have assigned proper logical system in the SLD for your technical landscape. If this is pointing to a different logical system, then probaboy you may want to change to suitable logical system.
Suggest you to look for the definitions using SM59 and IDX1 in R/3.
Hope this answers, please let us know your findings.
Thanks,
Srini.

Similar Messages

FM to get partner profile details for ALE-IDOCs?

hi
is there any function module to get partner profile details in current system?
extremly sorry my mistake......
for ALE-IDOCs
Message was edited by:
 ashwinee mali

BAPI_BUSINESS_PARTNER_MODIFY CBP: BAPI for Modifying (Creating/Changing) Business Partner
BAPI_BUSINESS_PARTN_GET_DETAIL CBP: Business Partner Detailed Information
regards,
srinivas
*reward for useful answers*

Profile values for specifically if enter section name and product name

I have tried to get Profile values with the following query,
SELECT *
FROM fnd_profile_options_vl po,
fnd_profile_option_values pov,
fnd_user usr,
fnd_application app,
fnd_responsibility rsp,
fnd_nodes svr,
hr_operating_units org
WHERE 1 = 1
AND pov.application_id = po.application_id
AND pov.profile_option_id = po.profile_option_id
AND usr.user_id(+) = pov.level_value
AND rsp.application_id(+) = pov.level_value_application_id
AND rsp.responsibility_id(+) = pov.level_value
AND app.application_id(+) = pov.level_value
AND svr.node_id(+) = pov.level_value
AND org.organization_id(+) = pov.level_value
Suppose I need to populate the profile values for specifically if I enter section name and product name.
How can I do that ???

Hussein Sawwan wrote:
Thanks, I have gone through the documentation,I can get all profile values.But how can I get the profile values and names that is related to/affects a particular product.
Is there any connection between products/items with profile option.No. However, you may run the same queries using the follows:
For example ..
For GL --> PROFILE_OPTION_NAME like '%GL%'
For AR --> PROFILE_OPTION_NAME like '%AR%'
And so on.
Please note that the above will not return all profile options that affect (or related to) specific module.
You can also get the list of profile option which are set at the Application/Responsibility level.
Thanks,
Hussein
>
Thanks, I have gone through the documentation,I can get all profile values.But how can I get the profile values and names that is related to/affects a particular product.
Is there any connection between products/items with profile option.No. However, you may run the same queries using the follows:
For example ..
For GL --> PROFILE_OPTION_NAME like '%GL%'
For AR --> PROFILE_OPTION_NAME like '%AR%'
And so on.
Please note that the above will not return all profile options that affect (or related to) specific module.
You can also get the list of profile option which are set at the Application/Responsibility level.
Thanks,
Hussein
Hussein ,
Can I use following query to retrieve the profile values for an item with m.msite_id =10218 AND s.section_id =10591 and i.organization_id = 204 and i.inventory_item_id =66567
select distinct *
FROM fnd_profile_options_vl po,
fnd_profile_option_values pov,
fnd_user usr,
fnd_application app,
fnd_responsibility rsp,
fnd_nodes svr,
hr_operating_units org,
ibe_msites_tl m,
ibe_dsp_sections_tl s,
mtl_system_items_b i
where
pov.application_id = po.application_id
AND pov.profile_option_id = po.profile_option_id
AND usr.user_id(+) = pov.level_value
AND rsp.application_id(+) = pov.level_value_application_id
AND rsp.responsibility_id(+) = pov.level_value
AND app.application_id(+) = pov.level_value
AND svr.node_id(+) = pov.level_value
AND org.organization_id(+) = pov.level_value
and m.msite_id =10218
AND s.section_id =10591
and i.organization_id = 204
and i.inventory_item_id =66567
Anything wrong here???
Thanks

Partner Profile vanishes in BW system

Hi All,
We are facing a recurring issue which happens in BW QA system after we refresh is from the BW production system.
After about a week or so after the refresh, the data loads halt in the BW QA system and the BW team gets an error "EDI partner profile not available".
After i checked, i found that the logical system name entry for the EDW QA system (i.e. self system entry) is missing from the table EDPP1 and also from transaction WE20.
I re-created it in WE20 and the entry automatically got created in EDPP1 table.
My question is : I suspect that some job or application program is deleting this entry. We checked the background jobs but no luck.
How do i resolve this error. The client has come up with this question and he wants an answer as to why this
entry is being automatically.
Can you please help?
Regards,
Hari Kishan

Hi,
See the following SAP Notes:
SAP Note 886102 - System Landscape Copy for SAP NetWeaver BW
SAP Note 325470 - Activities after client copy in BW source systems
SAP Note 325525 - Copying and renaming systems in a BW environment
SAP Note 886102 - System Landscape Copy for SAP NetWeaver BW
SAP Note 1333302 - Special procedure for BW system copy
SAP Note 996238 - Dump 'RFC connection error' after BW system copy
Search for PDF in SDN
How Tou2026System Copy in SAP Business Intelligence System Landscapes
Thanks
Reddy

Partner Profile configuration for EDI 810

Hi,
I am configuring partner profile for EDI 810 (Invoice). In the message control tab, what values should be entered for
1. Application
2. Message Type and
3. Process Code
Thank you.

Hi,
- Check Transaction NACE to see what applicatios you can use for different objects.
- Check transaction WE42 for all outbound process codes
- Check transaction WE41 for all inbound process codes.
- Check transaction WE64 for inboud / outbound message types and related process codes.
EDI 850:
Application - EF
Process code - ME10
Message type - NEU ( or your custom message type setup for EDI )
IDOC - ORDERS01 to ORDER05
EDI 810:
Application - V3
Process code - SD09
Message type - RD00 ( or your custom message type setup for EDI )
IDOC - INVOIC01 , INVOIC02.
EDI 820:
i think this is for inbound idoc of Payment Order/Remittance Advice. When yuo setup inbound partner profile, you do not need to know application
Process code - LOBX
Message type - LOCKBX
IDOC - PEXR2002
Let me know if you need any other information.
Regards,
RS

Partner profile details for WBI

Hi all
    this is my requirement.we need to send a file from WBI to SAP as IDOC.i want to know about sender details(i.e) sender port ,sender address,partner number.just suggest me about these things
    Thanks in advance

Hi ,
          Please refer the folowing links
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
Configurations in R/3 side
1. SM 59 (RFC destinations)
Create a RFC destination on the XI server. The connection type should be R/3 connection. The target host needs to be the XI server.
2. WE 21 (Ports in IDOC processing)
Create a transactional port. Provide the RFC destination created in this.
3. BD 54
Create a logical system.
4. WE 20 (Partner Profiles)
a. Create a new partner profile under partner type LS.
b. Assign the message type in outbound parameters.
c. Open the message type (Dbl click) and configure the receiver port to the port created.
Configurations in XI server.
1. SM59 (RFC destination)
Configure the RFC destination specific to the R/3 system.
2. IDX1 (Port maintenance in IDOC Adapter)
Create a port and provide the RFC destination.
TESTING:
WE19 For pushing the idoc in xi through trfc port.
To be able to trigger your IDOC from the SAP ISU system, you will have to set the partner profile in we20. Select your Business System (mostly under Logical system) and then create Outbound entries for whichever IDOC you want to trigger.
You define your basic type also in your partner profile settings, Please go thru the following links to get a better idea about partner profile:
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b833243d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b7cd343d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/32/692037b1f10709e10000009b38f839/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/5e/b8f8bf356dc84096e4fedc2cd71426/frameset.htm
Also, I would suggest that you go through this blog by michal if any issue arises,
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
Assign points if you found helpful
Regards.,
V.Rangarajan

Issue in Partner Profile config for Outbound IDOC

Hi Experts,
I have requirement like, When ever there will be any change in a Sales Order an Outbound IDOC will get triggered though a output type. This IDOC will save a file in the Application Server.
The Message Type i am using is ORDERS and the Basic Type is ORDERS05.
I have created a Partner Profile also a Receiver Port of type FILE.
I have Assigned Message type in Outbound Parameters.
I have assigned Receiver Port and Basic type under "Outbound Option".
I have Assigned Applications as 'V', Message type as 'Output Type' and Process Code under "Message Control".
When i am changing any Sales Order no IDOC is getting Triggered. I checked the Sales Order>Extras> Output> Header> Edit, the Output type is in Status RED with Message " No Partner Profiles (Message Control) Maintained".
Please guide me if i have missed any configs.
Help me solving this issue.
Thanks in Advance!
Priyabrata

Hi Priyabrata,
please try changing in your partner profile the application from V to V1. Another problem that's often causing the partner profile not to be found are the partner functions that are added automatically by SAP, but sometimes forgotten in the partner profile.
I don't have a SAP system at the moment, but as far as I remember the long text of the message indicates the partner profile parameters that SAP uses for the lookup.
If all of this doesn't help, I'd quickly debug this and see why SAP's not picking up the correct partner profile.
Cheers, harald

Can I transport partner profile settings frm one system to other?

hello,
is it poosible that whatever partner profile settings i have maintained in development server that i can trasport into production server?
or i have to maintain it manually?

Hi,
Usually you have to maintain manually the partner profile in production system due to security and data integrity purposes.
For example, you don't want to send any testing data to your partners (vendor, customer, etc) and you want to make sure the interfaces (inbound and outbound) work properly and free errors.
Having said that you can distribute and generate partner profile (BD64) from DEV to QA without using transport system. Please ensure RFC connection are setup properly for DEV and QA systems prior to distribute.
Regards,
Ferry Lianto

ALE partner profile setup for diff. IDOC extension

Hi,
We have three extensions of IDOC type HRMD_A06 and message type HRMD_A. In one of the extensions segment IT0002 is extended.
In the partner profile extension is not specified. Due to this when the IDOC is generated Custom segment is not getting picked up.
I pu the extension in the partner profile then it woks fine.
But I do not want disturb the existing profile setup. Is there any option in WE20 where we can define two profiles with one message type, basic type and different extensions.
Also if we define the custom message type then distribution model and the partner profile needs to be generated for the new custom message type.
Appriciate quick response.
Regards,
Sonali

Hi,
just check the FM 'BAPI_BUPA_CENTRAL_GETDETAIL'.
Or just search for oher FMs with BAPI_BUPA*.
Hope this helps...
vasanth

Maitain Partner Type Values for Organisational Unit

Please give me the TCode for Maitaining the Values for Partner Type ORGANISATIONAL UNIT (O).
Regards
Jogeswara Rao

Use tcode PA30
SAP Menu -> Human Resources -> Personnel Management -> HR Master Data -> PA30 - Maintain HR Master Data (Employee Master Data.

Partner Profile settings for IDOCs

Hi,
when i posted the IDOC, it left the status 51.
i think which means "Application not posted".
do i need to change the partner profile!
if yes please let me know how to change that.
its very urgent please.
thanks in advance.
Regards,
ravi.

As mentioned in the earlier reply you need to check idoc listing WE02.
You may also want to look into the partner profile- WE20 and see if what you are trying to pass thru has been set up correctly. Make sure the correct port is defined along with the partner details.
If you need to edit the IDoc , you can do it from WE02 by clicking on the segment and then going into the Change mode. The other option of re- processing Idocs is using the testing tool- WE19 or the re-process Idocs BD87 transactions.

AD security groups listed in user groups in Config Manager however not listed when selecting values for the "System Resource - System Group Name" query

Morning All,
We are in the process of setting up our SCCM 2012 infrastructure and are experiencing issues with our device collection querys based on AD security groups.
I can see the security groups are being updated per adsgdis.log - i can see the computers that are members of the groups in AD are being recorded in the same log. Issue is when we build the device collection query - click the value button for the string,
only 2 of the 18 AD security groups are displayed. These are 2 AD groups we setup initially to test.
We have since added several additional yet they only appear to populate as user groups in config manager.
The same goes for additional OUs that we have created with AD.
When i click the value button only the initial 10 OUs that were created are populating in the list of applicable OUs.
We have the discovery methods Group Discovery & System Discovery enabled and set to search the parent OU recursively
I'm wondering if there might be an SQL issue with this as it initially worked but stopped...
Additionally we added an OU recently that now appears in in the Values options in the query but the ones added previously and additionally after are not showing up....
Any help is appreciated.
Thanks,
Jeff

Given the adsgdis.log lists the new pc and the group it's assigned to it appears the AD group discovery is working.
Have the following excert from the adsgdis.log
INFO: Processing discovered group object with ADsPath = 'LDAP://************.****.COM/CN=Software - Microsoft Project Professional 2010 x64,OU=Software,OU=US-West,DC=*****,DC=com' SMS_AD_SECURITY_GROUP_DISCOVERY_AGENT 10/4/2012 7:08:13 AM 8180
(0x1FF4)
INFO: DDR was written for group '*****\Software - Microsoft Project Professional 2010 x64' - E:\Program Files\Microsoft Configuration Manager\inboxes\auth\ddm.box\userddrsonly\asg8ud94.DDR at 10/4/2012 7:8:12. SMS_AD_SECURITY_GROUP_DISCOVERY_AGENT 10/4/2012
7:08:13 AM 8180 (0x1FF4)
INFO: DDR was written for system 'THURMANWIN7VM' - E:\Program Files\Microsoft Configuration Manager\inboxes\auth\ddm.box\adhh8419.DDR at 10/4/2012 7:8:12. SMS_AD_SECURITY_GROUP_DISCOVERY_AGENT 10/4/2012 7:08:13 AM 8180 (0x1FF4)
Here you can see it processes the new members in the Software - Microsoft Project Professional 2010 x64 group and captures Thurmanwin7vm as a member.
I did find some log entries that reference permission issues with objects in the SQL database and have opened a case with MS to get that looked into. Hopefully that will be where the issue lies.

Multiple Logical Systems in Partner Profile for one instance

Can we create multiple Logical Systems in Partner Profile (WE20) for one instance or one System? If it is possible, can we create Logical System with respect to Plant/Country?

I am not quite sure if I understood your problem completley. But let's see...
Usually you use on on MSCS Cluster Group per SAP instance. So you have your already existing NW 7.0 ABAP stack in a separated Cluster Group, and you create a new Cluster Group for your new Java system.
You can find more information about it in this guide here on SDN:
Link: [High Availability;
More information about High Availability Setups for SAP System can be found here on SDN:
Link: [High Availability]
If you want to use the same database for your clustered ABAP stack and your new Java stack you can do a MCOD installation.
Please see Link: [SAP Note 388866 - Multiple Components on One Database - Installation|https://service.sap.com/sap/support/notes/388866]
Hope this helps.
Best regards,
Mathias

Using SYPART01 IDOC for setting partner profiles from external system

We wish to maintain our partner profiles from an external system.
Is there any existing interface for doing this.
It seems that the sypart message is only for output, not input.
Any ideas or suggestions?
Thanks!
Dan

Hello Dan,
Thanks for your post.
I hope the following code helps in future.
http://wiki.sdn.sap.com/wiki/display/Snippets/Copy+partner+profiles+with+SYPART+message+quickly.

Generating partner profile for File to Idoc(CREMAS) scenario.

Dear friend,
Completed all the steps in SLD, IR and ID.
I do not know how to create Partner profile and I skipped this step.
While testing I got the error "Unable to convert sender service to an ALE logical system".
I think i got this error because I have not created partner profile.
Could anybody tell step by step process of creating partner profile including logical system names( Sender and Receiver)?
I have seen many blogs and i couldn't get clear picture on how to generate partner profile.
My sender system is XI server and receiver is R/3.
I have created RFC destination, Port also.
Thanks in Advance
Chiru

generally u create partner profiles using transaction WE20.
SAP Menu -> Tools -> IDoc Interface/ALE -> Administration -> Runtime Settings -> Partner Agreement (WE20).
go through this link for step by steps
http://help.sap.com/saphelp_nw2004s/helpdata/en/dc/6b808e43d711d1893e0000e8323c4f/content.htm
http://www.thespot4sap.com/Articles/SAP_ALE_Configuring.asp

Partner profile value for XI system

Similar Messages

Maybe you are looking for