Pass by Screens during Transfer the Applicant to Employee

Dear Gurus;
While transferring the Applicant's master data from the applicant's database to the employee's one the Icons "Next" or "Previous" are dimmed is there a way to make them appear?
Thanks in advance.
Best Regards;
Lobna

In PB40 run the action prepare for hiring... Only applicants with overall status 2(To be hired) can be transferd to PA.
Use the hire applicant action in PA40.

Similar Messages

  • Passing selection screen values to the next report using CALL TRANSACTION

    Hi experts,
    I have 2 reports. In the first report i have the 3 input fields in the first report, how do i pass the values to the next report which is transaction: ZKKBC_PKO_2.
    I want to display in the next report the selections that the user previously selected.
    First report:
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
    PARAMETERS: COMP     LIKE AFRU-WERKS OBLIGATORY MODIF ID s1.
    PARAMETERS: PERIOD   LIKE COEP-PERIO OBLIGATORY MODIF ID s1.
    PARAMETERS: YEAR     LIKE COEP-GJAHR OBLIGATORY MODIF ID s1.
    SELECTION-SCREEN END OF BLOCK b1.
    CALL TRANSACTION 'ZKKBC_PKO_2'.
    Anyone can help me?
    Thanks,
    Lawrence

    Hi experts,
    What i did is this:
    Using SET PARAMETER
    in the first report
    SET PARAMETER ID 'WRK' FIELD COMP.
    SET PARAMETER ID 'VPE' FIELD PERIOD.
    SET PARAMETER ID 'GJR' FIELD YEAR.
    CALL TRANSACTION 'ZKKBC_PKO_2'.
    Second Report
    SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
    PARAMETERS: WRK     LIKE AFRU-WERKS.
    PARAMETERS: VPE     LIKE COEP-PERIO.
    PARAMETERS: GJR     LIKE COEP-GJAHR.
    SELECTION-SCREEN END OF BLOCK blk1.
    Using SUBMIT
    First Report
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
    PARAMETERS: COMP     LIKE AFRU-WERKS OBLIGATORY MODIF ID s1.
    PARAMETERS: PERIOD   LIKE COEP-PERIO OBLIGATORY MODIF ID s1.
    PARAMETERS: YEAR     LIKE COEP-GJAHR OBLIGATORY MODIF ID s1.
    SELECTION-SCREEN END OF BLOCK b1.
    SUBMIT ZCO_PRDCOST_ACTUAL_2 VIA SELECTION-SCREEN USING SELECTION-SETS OF PROGRAM 'ZCO_PRDCOST_ACTUAL_1' AND RETURN.
    Second Report:
    GET PARAMETER ID 'WRK' FIELD comp.
    GET PARAMETER ID 'VPE' FIELD COEP-PERIO.
    GET PARAMETER ID 'GJR' FIELD YEAR.
    Either this 2 ways i still cannot get the first report selection values on the 2nd report. Can someone help me see if my codes is correcT?

  • Problem getting passed activate screen on ipad mini and iphone 4s

    My auntie recently passed away and i have been given her iPhone 4s and iPad mini 2 to sell. I factory reset both of them through my iTunes the other day but i did not realise there would be an activate screen. As she has passed away i have no way of getting the required information to get passed this screen such as the password and recovery key. The only thing i do know is her I.D. Is there anything i can do?
    Thanks.

    You might be able to get Apple to unlock it if you supply:
    Death Certificate
    Original Proof of Ownership
    Proof that you've inherited the 2 devices and legally own them.
    Proof of your own identity.
    Lots of luck.  I don't hold much hope out for this but it can't hurt to try.
    Let us know if it works.
    Use the Contact Us link at the bottom of the page to transmit this information directly to Apple.

  • I am getting frequent lock-ups and blue screens during boot up. The lock ups occur during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button. Ideas?

    I am getting frequent lock-ups and blue screens during boot up on my Mac Pro.  The lock- ups occur sometimes during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button.
    I had the Mac Defender malware and I have used apple jack but still having issues.

    I am getting frequent lock-ups and blue screens during boot up on my Mac Pro.  The lock- ups occur sometimes during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button.
    I had the Mac Defender malware and I have used apple jack but still having issues.

  • Is there a way to lock the phone's touch screen during a phone call?

    I just purhased my iPhone and I noticed that during a phone call I may accidentally tap Mute or Speakerphone with my cheak, depending on which hand I hold the phone in. Also when I hand the phone over to someone they may accidentally tap a button, and in the worst scenerios they will accidentally end the call.
    Is there a way to lock the screen or something to prevent any of the above from occuring?

    Their currently isent a way to disable the buttons but what you can do is click the home button during a call after pressing loud speaker and that will separate you from the call options and take you to the home screen and on the top it will have say call active and you can click that to renter the call note the call will still be active but when you hold it next to your face the screen should temporally go dark. Steve jobs was the one who came up with when the top sensor is active the screen will go dark and disable on screen button pressing when it is press against your face

  • HT5100 I downloaded a video course from iTunes U to my iMac. How do I transfer the video to Apple TV to watch on my big screen TV?

    I downloaded a video course from iTunes U to my iMac. How do I transfer the video to Apple TV to watch on my big screen TV?

    I do something like that, and can confirm 20 feet won't be a problem. More than 30 or so might be.

  • While updating my ipad to ios7, I could not pass the terms and conditions screen where I had to agree or disagree. It just didn't move pass that screen. I can't do anything to go forward or back. It's just stuck there.

    While updating my ipad to ios7, I could not pass the terms and conditions screen where I had to agree or disagree. It just didn't move pass that screen. I can't do anything to go forward or back. It's just stuck there.

    Try to reset the device:
    Device Reset (won't affect settings/data/music/apps/etc)
    1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
    2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
    3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally.

  • There is always a blue screen appears after the Apple logo during the booting process. And then everything is back to normal. What is this thing? Is there something wrong with my screen or something?

    There is always a blue screen appears after the Apple logo during the booting process. And then everything is back to normal. What is this thing? Is there something wrong with my screen or something?

    Nah - that's just the normal boot process.
    Clinton

  • Toshiba M305D : blue windows screen during the install of Windows 7 / Vista, no Audio on Windows XP

    Dear Users
    Last week I had a clean install of Windows 7 64bit on my M305D-S4830 laptop.
    I've used this OS on this machine before, and it worked fine.
    After installing Win7, the device manager showed 2 unknown devices. First I've installed the O2 multimedia card reader, and it went ok. Secondly I've installed for the unknown device "hdmi audio" a hdmi audio driver from ATi, since the notebook has AMD 780V chipset and a Radeon HD3100 (it hasn't any hdmi output, but I didn't want to have any unknown devices). 
    And my nightmare begun.
    While restarting after the driver upgrade, my brand new Win 7 boot hang on blue screen code: 0x00000124, which is common for many hardware and software faults. I ran safe mode to clean the system from the hdmi audio driver, but the catalyst install manager dind't let me to remove it. Since it was a fresh install on a formatted HDD, I took the time for another clean install (20 mins). But during the Win 7 install, the installer hang on blue screen, guess what, code: 0x00000124. I changed to the factory-backup Win Vista disks of my laptop, but Vista had the same problem, I couldn't install this OS either, blue screen during install, too.
    I took a Win XP Prof SP3 as a last option, and I could finally install it. But after the install, I had problems with the Radeon HD3100, I couldn't install the driver from the .exe, I had to make it from the device manager via properties/I choose to/graphics adapters/own disk. So I don't have the control centre, but the display works in 1280x800.
    The bigger problem is: no sound.
    The device manager in Win XP shows only one unknown audio device: the hdmi audio. I can't install the conexant drivers, because it says I don't have the device for that. When I install the ATi hdmi driver for XP, I get the blue screen with the error 0x00000124. Nice.
    I have updated bios, and made a proper format with the partititons deleted, but it didn't helped. I think the Vista/7 install crashes at the point, when it tries to install the audio driver during OS install, because the XP was running until I have tried to install it, too. But I can't configure the Vista/7 install not to try loading it.
    So my laptop is only comnpatible with XP, the install of Vista or 7 crashes. And in XP, I have got no audio devices, therefore no sound. You can imagine, how glad I am looking at my Harman/Kardon speakers right now...
    Any ideas?
    Alex

    Satellite M305D-S4830 
    Any ideas?
    Alex, restore the hard disk to its original out-of-the-box contents using Toshiba recovery media. If you didn't burn them, order the discs.
       Order Toshiba Recovery Media
    If it doesn't run properly after that, you have a hardware malfunction.
    -Jerry

  • HELP! Does anyone know a "Data Recovery Expert" for I-Phone? - My calender disappeared during transfer of data from my old I-Phone 4 to my new I-Phone 5s. It was on both I-Phones then vanished. (It was evidently not syncing during back-ups on the laptop)

    HELP! Does anyone know a "Data Recovery Expert" for I-Phone? - My calender disappeared during transfer of data from my old I-Phone 4 to my new I-Phone 5s. It was on both I-Phones then vanished. (It was evidently not syncing during back-ups on the laptop)

    What calendar were you syning to? Outlook? Google? Something else? The directions on how to resync vary a bit.

  • I'm getting the grey screen during start up and can't boot the computer. I did a cmnd R but worried it would automatically wipe my hard drive and reinstall OS.  Is there a risk at cmnd R will result in wiped HD without me actively making that choice?

    I'm getting the grey screen during start up and can't boot the computer - MacBook Pro with lion.
    I did a command r after doing some research but got nervous that it would automatically wipe my hard drive and reinstall OS.
    I was nervous because it asked me for language for software use before any options were presented (such as repair via disk utility). It looked similar to an OS install.So I powered off....Is there a risk at command r will result in wiped HD without me actively making that choice?

    Repair the Hard Drive and Permissions - Mavericks, Lion/Mountain Lion
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
    Reinstall Mountain Lion or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
         Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is
                    three times faster than wireless.

  • How to transfer the contents of a line of a table control to second screen?

    Hi,
    I have a table control and I have entered some contents in one line of a table control .
    When i click on this line and then click on the detail button on the screen , it should take me to another screen and whatever I have entered in the table control should be transferred to the second screen .
    Please could anyone help me out with this .
    Regards,
    Sushanth H.S.

    Hi
    U need to get the index of the line of table control by command GET CURSOR:
    PROCESS PAI.
    LOOP AT ITAB.
       MODULE GET_CURSOR.
       MODULE MODIFY_ITAB.
    ENDLOOP.
    MODULE USER_COMMAND.
    Module to pick up the selected line:
    MODULE GET_CURSOR.
      GET CURSOR LINE VN_LINE.
    ENDMODULE.
    Module to transfer the data from table control to internal table:
    MODULE MODIFY_ITAB.
      ITAB-FIELD1 = <FIELD OF TABLE CONTROL>.
      MODIFY ITAB INDEX <TABLE CONTROL>-CURRENT_LINE.
    ENDMODULE.
    U should considere the variable line has the value of the index of the line of table control, so u need to calculate the number of the corresponding line of internal table:
    MODULE USER_COMMAND.
      CASE OK_CODE.
        WHEN 'DETAIL'.
    * Calculate the line of internal table:
           VN_LINE = <TABLE CONTROL>-TOP_LINE + VN_LINE - 1.
    * Read the data
           READ TABLE ITAB INDEX VN_LINE.
    * Transfer the data to the output structure of the new screen
           <STRUCTURE>-FIELD1 = ITAB-FIELD1.
    * Call the new screen
           SET SCREEN <NEW SCREEN>.
           LEAVE SCREEN.
    Max

  • Our Band purchased Logic Pro and it was loaded to one member's Macbook Pro. Unfortunately, he passed away with cancer in May. How can we transfer the ownership and the software (it was downloaded) to a new user's Macbook?

    Our Band purchased Logic Pro and it was loaded to one member's Macbook Pro. Unfortunately, he passed away with cancer in May. How can we transfer the ownership and the software (it was downloaded) to a new user's Macbook?

    Hi Kurt,
    The Mac IIci is not even powering on at all. Tried again with wih a tested power cable and no luck. 
    I think it's best that take  this issue to the Older Hardware Community. Not only did I see a fair number of replacement parts for the IIci avaiable online, but there also vintage external floppy drives as well. I'm not giving up.
    Thank you for your time and interest in helping.

  • Appear flashing line on the screen during work

    I bought Macbook Air since 1st July 14. I found the flash line appear on screen during work but it's just shot line at the first and It appears just few secs. So I thought it's not too serious to me. Till now the line is seem more longer and appear frequently. Then I decide to take it to Service centre. They said my screen is not in its position. It's just a bit, If you don't look at it exactly, you won't notice it. I don't know what happen. It's usually as it was on fist day I bought it, never be fallen it. It's still in the good condition.  They fixed my problem by re-fit my screen but after I use it again I still found that flash line. what should I do? Now my air got the scratch on the screen edge from re-fitted it.  I really disappoint.

    I'm assuming by "flash line" you mean there's a horizontal or vertical line randomly appearing on your screen? If that's the case I've seen that on laptops before. If its an intermittent issue try to move the screen forwards and backwards on its hinge to see if you can find one spot where that line almost always appears. You should have an issue with the cable connection to the main logic board, or the cable itself could be malfunctioning.
    Also what exactly did they do when they "re-fit" your screen? Did they simple check the connectors, or actually dissemble the computer and resemble it? Either way if a cable is bad then it wouldn't have made a difference. You may be looking at a warranty replacement solution on this one.

  • HT1766 After restoring my iphone 4 to factory settings, then restoring from a recent backup, my phone will reboot but keeps coming back to the "new setup or restore from backup screen". How can I by-pass this screen to go directly to the sync apps/music s

    After restoring my iphone 4 to factory settings, then restoring from a recent backup, my phone will reboot but keeps coming back to the "new setup or restore from backup screen". How can I by-pass this screen to go directly to the sync apps/music screen?

    Well, it's certainly behaving as though the phone that was backed up was synced to a different iTunes library.
    I'm going to throw one more thing out there... Yes, you backed it up to this computer... Was the phone previously set up to sync with this computer? Or was it syncing with a different computer and you just backed it up to this one?
    You may have to end up setting it up as a new device and rebuilding the phone by manually re-syncing your data, apps, music, etc. to the phone.
    Trying to keep your library on a different drive can be tricky. If iTunes starts up and the library isn't available, it may end up generating a new library ID, meaning that you could easily find yourself in exactly the position you're in now...
    I'm curious why there was a need to restore your phone to begin with... It may not have any bearing on this at all, but it could.

Maybe you are looking for

  • Insert chinese big5 characters into database

    database: mysql default charset of web page: utf-8 (specified in apache, all pages are in utf-8) if I enter english, database insert is ok but if I enter chinese, error = "You have an error in your SQL syntax; check the manual that corresponds to you

  • Time series chart in null date

    Hi, everyone Currently using Crystal Reports 2008 Product: 12.7.0.1983 I make time series chart using a line graph. №      X-axis          Y-axis 1        2014/1/1          100 2        2014/1/2            20 3        2014/1/3          null 4       

  • PO confirmation/AB acknowledgement

    Hi Friends, I need your help/suggestion on PO confirmation. I am using a confirmation control key which requires AB first followed by LA(ASN). For some reason, I do not see the AB confirmation getting populated automatically through IDOC. I checked t

  • Maintain (SMARTFORMS) objects in production system

    Hi, I need to maintain special objects directly on the production system although the system is declared as non-changeable. Is there a chance to customize this without a modification? I need it to be able to maintain smartforms text-modules. any help

  • Oracle weblogic 12c 64bit

    64-bit version of Oracle WebLogic 12c download .When will there be.