Pass Parameters from Webi to Xcelsius Dashboard in BO 4.0

Hi All, Please explain me how to pass para maters from webi report to Xcelsius Dashboard. Your Help is Highly appreciated. Thanks Arvind Shukla

Hi,
we can do this with the help of document link in webi.
just we have to pass the document link of dashboard
and make sure that prompt text should be same.

Similar Messages

Pass parameter from Webi to Xcelcisus Dashboard in BO4.0

Hi All,
Please explain me how to pass para maters from webi report to Xcelsius Dashboard.
Your Help is Highly appreciated.
Thanks
Arvind Shukla

Hi
this can be done with the help of document link.
just create a document link in the webi.
steps 1. right click on the field and select create document link.
step 2 past the document link of dashboard.
make sure the prompt name should be same.

Passing parameters to web based oracle forms

Hi,
How can I pass parameters from web page to oracle form applet? OR is there anyway i can know (within a form) if that form is run from a client/server or from web. This is just to set some parameters depending on the condition: client/server or web application.
thank you

To know if you are on the Web use the get_application_property built-in, check out the online help for it.
To pass parameters - if you are using the forms servlet you can pass parameters on the URL that calls your Forms application.

Passing parameters from an URL to a WAD Web Template 7.0

Hi guys, I need to pass parameters from an URL to a web template created with WAD 7.0. We need to open a template with certain filters starting from a link button located on an Xcelsius Dashboard. Our customer wants a web template to be opened with the filters defined within the Xcelsius
The idea is to run the template with the filters defined in the URL. I know this was incredibly easy with WAD 3.x, but I didn't find any suitable solutions to use with WAD 7.0.
What is the easiest way to do this with WAD 7.0?
Thanks in advance and regards.
Fabio Cristi

Hi,
It is possible in 7.0, but unfortunately it is a lot more complicated than i 3.x. There are quite a few examples here:
http://help.sap.com/saphelp_nw70/helpdata/en/43/ef05462480025ae10000000a1553f7/content.htm
I used it in a case where I wanted to embed a Web template in a BPS application and pass characteristic filters from the BPS application to the web template - similar to your requirements. Basically you need the following just to restrict one characteristic :o(
&BI_COMMAND_1-BI_COMMAND_TYPE=SET_SELECTION_STATE
&BI_COMMAND_1-TARGET_DATA_PROVIDER_REF_LIST-TARGET_DATA_PROVIDER_REF_1=DP_1
&BI_COMMAND_1-CHARACTERISTICS_SELECTIONS-CHARACTERISTIC_SELECTIONS_1-SELECTIONS-SELECTION_1=SELECTION_INPUT_STRING
&BI_COMMAND_1-CHARACTERISTICS_SELECTIONS-CHARACTERISTIC_SELECTIONS_1-SELECTIONS-SELECTION_1-SELECTION_INPUT_STRING=PDS06
&BI_COMMAND_1-CHARACTERISTICS_SELECTIONS-CHARACTERISTIC_SELECTIONS_1-CHARACTERISTIC=0D_PH2
I could only get it to work with one characteristic and I suspect, that the reason is that the URL simply gets to long (very quickly). You have to repeat the above for every characterstic you want to use :o(
Hth,
Jacob

Passing parameters from dynpro to a web dynpro

Hi all,
we have following scenario: a user starts a web dynpro, fills in the week and push a button. By this, an interactive form is created, with the users personal ID and the week, so the user can maintain his worked times.
Now our problem is that we want to go into that interactive form skipping the web dynpro, i.e. we don't know how to pass parameters from a dynpro to a web dynpro.
Do someone have a clue how we can do that? I would highly appreciate any help.
Many thanks in advance
Regards
Anna

hi anna
please check the following links it is explains simple webdynpro java examples which is using interactive forms.
http://help.sap.com/saphelp_nw04s/helpdata/en/dc/f1783fe3263042e10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2b6db1c4-0801-0010-faa5-ff4b4df55b45
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0d60ac9-3f59-2a10-4a86-a612d41c24e4
Thanks and Regards
shanto aloor

How to pass parameters from a dashboard or report to any OA Framework-based

In Metalink Note:276708.1, about Oracle E-Business Intelligence Minipack L (4.0.9).
Common Features for Dashboards and Reports section say:
You can now pass parameters from a dashboard or report to any OA Framework-based application page.
How to do pass?
Regards,
Arone

Nobody help me?

Pass parameters from JSP Dyn Page to WDJ Application

Hi,
I am trying to pass parameters from my JSPDyn Page to WDJ Application.
I am using NWDS 7.1 EHP1
My code is :
function to_WEBDYNHK()
      EPCM.relaxDocumentDomain();
      EPCM.doNavigate
    ('ROLES://pcd:portal_content/Himanshu.Himanshu/TestDynUIApp?DynamicParameter="hkparam%3Dqwertyuio"');
This method is being called on click of a button.
hkparam is the parameter in question.
The JSPDyn page is an iView and the WDJ application is a page and both have been assigned to a role.
In the properties of the WDJ Page, I have removed DymanicParameter from "Do not Forward These Parameters To Web Dynpro" property.
However I am getting null as the value of hkparam in my WDJ application.
The code used is :
IWDRequest request = WDProtocolAdapter.getProtocolAdapter().getRequestObject();
       String param1= request.getParameter("hkparam");
What seems to be missing here.
Please help.
I went through the documentation on SDN but it does not seem to help.
TIA,
Himanshu

Hi Himanshu,
Try this code.
EPCM.doNavigate("ROLES:portal_content/Himanshu.Himanshu/TestDynUIApp?hkparam=Dmypass1123")
if the parameter is hkparam and the value to be passed is Dmypass1123. You need not change any design time property of the WD page, and WDProtocolAdapter should retrive the parameter.
Regards,
Vishweshwara P.K.M.

Passing parameters from a browser URL to Flash

Flash CS3, AS3
Is there any way to pass parameters from the URL line in a
web browser to actionscript?
ie. so if you had something like the following URL link in
the browser...
http://www.somedomain.com/someswf.swf?var1=10&var2=false
...it would pass var1 and var2 to someswf.swf.
(Hypothetically, of course - I'm unsure as to the necessary syntax)
Is this possible? Or would I need some intermediary software?
Thanks
Rick

i answered a very similar forum query a few days ago
here
You need to look into loaderInfo.parameters.

Automatically Pass Parameters From Crystal To SAP B1

So, I've searched extensively, and haven't been able to find an answer to my unique issue.
This question pertains to linking a Crystal Report by parameter values to the OWOR table in SAP B1, and automatically passing those parameter values from the active record in SAP. Several other tables are used in sql joins, but the report is generated from an OWOR production order. I should start by stating that the report works great when manually populating the parameter fields when SAP calls for them.
Overview:
I've written a report in Crystal that contains several sub reports, some of which are looking to the DocEntry field as the parameter (DocKey@) and others that do not look to the DocEntry field at all - but rather use another field on the form to pull up information that spans more than just that one production order. I've chosen to upload as a layout in SAP (as that is all I've worked with up to this point, and it seems it needs to be to automate from a production order); but as I continue to research, it appears DocKey@ is mandatory when uploading as a layout, and in order to view the report from the actively selected production order, it must be a layout. Does that mean the parameter is required in all sub reports? Is it required in any sub report?
I have two main issues that I need to hurdle for this report to work how I would like it to:
1. Three of the eight Commands (one main command and seven sub-report commands) use the DocKey@ as the parameter to pass from SAP back to Crystal. The main report command, as well as four of the sub reports/commands are looking to another field in the OWOR record - which happens to be a re-seller defined field (UDF). For all intensive purposes, let's call this field BatchID. I'm assuming the sub report commands run in succession, one after the next. The reason I need to use BatchID as the parameter to pull from the record, rather than DocEntry, is there are other records that contain the same BatchID, and I want all of the info pertaining to that BatchID to populate on the report.
Q1: The first command containing DocKey@ is automatically populated by SAP, and the user does not have to key that one in. However, the next two DocKey@ parameters do not automatically populate, and the user is asked for those values. How can I fix this?
Q2: How can I automate the passing of BatchID so the user does not have to fill it in 5 times when they wish to preview the report(layout)? Can I link ObjectID@ to any field in OWOR? Is there any other way like creating a stored procedure or something , to automate the passing of that variable from the SAP active record to the crystal report - so the user doesn't have to key it in several times just to pull up the report?
Thank you so much for even reading, let alone helping me with this issue!!
Cheers,
Nick

 Hi
 I had the same problem. Take a look at this newsgroup article on the businessobjects
 website :
 http://support.businessobjects.com/library/kbase/articles/c2015264.asp
 Grieg
 "Rada Pickens" <[email protected]> wrote:
 >
 >Hi,
 >
 >I'm getting the same error message, I was wondering if you fixed the
 >problem.
 > I'm stumped, can you help?
 >
 >Rada
 >
 >
 >"JAI" <[email protected]> wrote:
 >>
 >>I am passing parameters, from the JSP page to Crystal Report, i took
 >>the code from
 >>the below mentioned url, i dont know, it is something wrong with the
 >>jsp page
 >>or crystal report.
 >>i have created parameter field in crystal report to receive the value
 >>from the
 >>jsp page.
 >>If u r not clear with the error, please reply to me.
 >>
 >>i took the code from the below mentioned page
 >>
 >>reference page:
 >>----------------------
 >>http://dev2dev.bea.com/trainingevents/webinars/012804_faq.jsp
 >>parameterFieldsViewReport.jsp
 >>
 >>
 >>error displaying in the jsp page
 >>-----------------------------------
 >>com.crystaldecisions.report.web.viewer.CrystalReportViewer
 >>Some parameters are missing values
 >

Pass parameters from hbj link

Hi,
I want to pass parameters from hbj link to the component where the event method is going to be called. And also when I click the event how it is going to redirect other jsp.
Regards,
Suresh.B

Hello Reinuka,
It is possible to send parameter to Web Dynpro iview.
In the iview application parameters add Param1 =.
Place this code wherever you want to call that iview.
WDPortalNavigation.navigateAbsolute("ROLES:"+iview,WDPortalNavigationMode.SHOW_INPLACE,(String) null, (String) null, WDPortalNavigationHistoryMode.NO_DUPLICATIONS,(String) null,(String) null,"Param1 = ");
"ROLES:"+iview=Iview Path
"Param=Paramvalue"=Parameter and its value
Youcan receive the value as
String parmvalue=WDWebContextAdapter.getWebContextAdapter().getRequestParameter("Param");
Regards,
Sridhar

How can I pass parameters from one process flow to another process flow?

How can I pass parameters from one process flow to another process flow (sub process) in warehouse builder? let me know the steps I have to do in warehouse builder.
Thanks in advance,
Kishan

Hi Kishan,
Please post this question to the Warehouse Builder forum:
Warehouse Builder
Thanks, Mark

Passing Parameters from One Screen to Another Screen

Hi All,
I need to Pass Parameters from one Module Pool Screen to Another Screen.
I have two Parameters in First screen. I don't want to use Export and Import
The first screen record should sit in the Second Screen as it is.
Please suggest me.
Thanks and Regards,
Prabhakar Dharmala

An Idea,
Create a function group, in that define global variables. Then create two function module. Pass variable from one function module and get in the another one.
Hope this will help you to solve. If you need further help I will create and sent you a test code.
Darshan.
Pl. Reward points to the helpful answer, it motivates us to answer more

Passing parameters from shell script to OWB process flow

Hi all,
I am running OWB process flow (using the template script provided by oracle) and i want to pass two date parameters as shown below:
sqlplus -s $SQL_USER/$SQL_PWD@$ORACLE_SID @$HOME_DIR/src/vmc_oem_exec_script.sql OWB_OWNER VMC_POST_DW_PF_LOC_SIT PROCESS VMC_NM1_PORT_MAIN "," "P_DATE_FROM=$DATE_FROM,P_DATE_TO=$DATE_TO"
How do i catch those values in process flow and pass those to mappings in Process flow?
Do i need to create PF variables with same names or any name will do?
Thanks in advance

This document is explaining how to pass data between activities in process flow.
I am passing parameters from a shell script.
Any ideas,how to pass parameters from shell script and then initialize the process flow variables based on those values and then pass them further to mappings.
Thanks

Passing parameters from one form to another

Hi,
I'm trying to pass parameters from 1 form to another. I would be able to call the form, but the parameters are not passed to the calling form. I do not know what's the problem. Basically, the 2nd form shows up with blank values in all the fields. Below is my code. Anybody expert in this, pl. help.
By the way my 1st form is based on PROCEDURE.
declare
s_requestor           number(10);
s_customer_impact      varchar2(4000);
s_creation_date      date;
l_url                varchar2(4000);
blk               varchar2(10) := 'DEFAULT';
begin
p_session.set_value(
p_block_name => blk,
p_attribute_name => 'A_P_REQUESTOR',
p_value => 88888);
s_requestor := p_session.get_value_as_number
(p_block_name => blk,
p_attribute_name => 'A_P_REQUESTOR');
s_customer_impact := p_session.get_value_as_varchar2
(p_block_name => blk,
p_attribute_name => 'A_P_CUSTOMER_IMPACT');
s_creation_date := p_session.get_value_as_date
(p_block_name => blk,
p_attribute_name => 'A_P_CREATION_DATE');
l_url:=('/pls/portal/PORTAL.wwa_app_module.link?
p_arg_names=_moduleid&p_arg_values=1794837934&
p_arg_names=_show_header&p_arg_values=YES&
p_arg_names=REQUESTOR&p_arg_values='||s_requestor||'&
p_arg_names=CREATION_DATE&p_arg_values='||s_creation_date||'&
p_arg_names=CUSTOMER_IMPACT&p_arg_values='||s_customer_impact);
PORTAL.wwa_app_module.set_target(l_url);
end;

the way to call one form from another and pass values for parameters from the procedure is like this:
PORTAL.wwa_app_module.link (
p_arg_names => PORTAL.wwv_standard_util.string_to_table2('_moduleid:_show_header:REQUESTOR:CREATION_DATE'),
p_arg_values => PORTAL.wwv_standard_util.string_to_table2('1191314879:YES:'||s_requestor||':'||s_creation_date));
and so on.
Hope it works for you

Getting error , while passing parameters from one page to another page

Hello friends,
i am getting error, while passing parameters from one page to another page, below code i wrote.
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
ArrayList arl=new ArrayList();
EresFrameworkAMImpl am=(EresFrameworkAMImpl)pageContext.getApplicationModule(webBean);
ERecordImpl ERecordObj=new ERecordImpl();
HashMap hMap = new HashMap();
hMap.put("1",ERecordObj.getTransactionName());
hMap.put("2",ERecordObj.getTransactionKey());
hMap.put("3",ERecordObj.getDeferredMode());
hMap.put("4",ERecordObj.getUserKeyLabel());
hMap.put("5",ERecordObj.getUserKeyValue());
hMap.put("6",ERecordObj.getTransactionAuditId());
hMap.put("7",ERecordObj.getRequester());
hMap.put("8",ERecordObj.getSourceApplication());
hMap.put("9",ERecordObj.getPostOpAPI());
hMap.put("10",ERecordObj.getPayload());
// hMap.put(EresConstants.ERES_PROCESS_ID,
if(pageContext.getParameter("item1")!=null)
pageContext.forwardImmediately(EresConstants.EINITIALS_FUNCTION,
OAWebBeanConstants.KEEP_MENU_CONTEXT,
null,
hMap,
true,
OAWebBeanConstants.ADD_BREAD_CRUMB_YES
Error(71,2): method forwardImmediately(java.lang.String, byte, null, java.util.HashMap, boolean, java.lang.String) not found in interface oracle.apps.fnd.framework.webui.OAPageContext
Thanks
krishna.

Hi,
You have imported the wrong class for HashMap.
Import
com.sun.java.util.collections.HashMap; instead of java.util.HashMap
Thanks,
Gaurav

Pass Parameters from Webi to Xcelsius Dashboard in BO 4.0

Similar Messages

Maybe you are looking for