Passing data from one view to other in differnt window

Hi all,
I am developing an application in which i need to transfer some data from one view of first window to another view of 2nd window. Also first window is an modal pop up window. Can anybody help in this regard.

Hi,
as ayyapparaj said,
navigate to component controller of ur application and create a node with required no of attributes.
and map this node to window1 and window2.
and set the required values into the context in window1 ,then these values available accross the (window2)application.
i hope u got...
refer this link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/903fed0d-7be4-2a10-cd96-9136707374e1
Regards,
ramesh
Edited by: Ramesh Babu V on Aug 27, 2008 3:36 PM

Similar Messages

Need help in passing data from one page to other page in oaf

Dear All,
I have a requirement as below.
I am doing some selection in one page and populating the data in another page table region, next time when i am selecting another row and pressing the button i need to display the previous row as well as new row, how can i achieve this, currently i am able to see only the first row what i selected first.
Ex: 1 st scenario: after passing the selected data from one page to base page the data looks like below in base page.
1 test desc
2nd scenarios: when i am again selcting data and passing to the base page it should be like that
1 test desc
2 test desc
but currently it is showing
1 test desc only for the 2nd case, can any one please help me on thsi , its little bit urgent
Thnaks

How are you passing the values to the base page? Are you using setting the retainAM parameter to true while doing a forward.

How to pass data from one component to other component.

Hi,
I have created a table view in Item Details Page Under Price Agreement Assignment Block. Price Agreement Assignment Block has one table as standard. I have created one more view Under the Assignment block of Price agreement(CRMCMP_CND). In that view I have an option to enter data when the user click on edit. In that custom view, If user cnages to edit mode and enter data. it has to save when user click's on save button in Quotation page(BT116QH_SRVQ). From Quotation page user clicks on item to get the Item details. In the Item details there is an Price Agreement Assignment Block. In that Custom view was created and assigned to it. Data entred in that view needs to be stored when user clciks on Save button on Quotation page when he comes back. How to get the custom view data from CRMCMP_CND to BT116QH_SRVQ). Please advice. Thanks In Advance.

Hi Satish,
Global custom controllers are not available everywhere. So before using them please make sure that they are available for your case.
http://sapdiary.com/index.php?option=com_content&view=article&id=2402:sap-network-blog-interaction-center-global-custom-controllers&catid=81:data-services&Itemid=81
if you find problems in navigating data using component controllers then you can also navigate it through navigation links.
If you see your outbound plug method op_xxxxx, then there is a method call to navigate method. This method has an option to pass your data collection. Pass your data collection and also inbound plug so that in target component you can read and temporarily store data as soon as you hit target component.
Hope that helps,
BJ

Passing Variables from one View to another

First of all Hi this is my first post on the sap forums.
Aplogies if I have come to the wrong place or if this question is very easy, but I am new to abap and web dynpro and have found myself struggling a little bit. So I stumbled across this site and thought I would ask for help.
My problem is this, I have 2 variables on my MAIN view, one called MONTH and the other called YEAR. What I want to do is on a button click on the MAIN view pass the values of these variables to another view called SUMMARY_RPT and then use these variables in an SQL query I have on this view.
Anybody out there that can help ?
Many Thanks,
George

Hi George,
Welcome to webdynpro abap community. To pass data from one view to another, you can should create two attributes (type string) in the attribute tab of of the component controller. Now these will act as global variable for you. Now you can access these attribute in your view in this way:
wd_comp_controller->gv_val "gv_val is the name of the attribute
Populate the value in it and use it anywhere you want.
There is one more way to do the same.
Create a node under context in component controller and create 2 attributes(type string) after that. Map this node to both the views. Now get the value of month , year and set these attribute with the same values with the help of code wizard in view 1. Now in the view2 simply read those attribute and you'll get the value of month and year which was entered in the first view. Read the attribute with the help of code wizard. Now you can use them accordingly.
I would suggest you to use 1st method as it is better performance wise.
I hope it helps.
Regards
Arjun

How to pass Data from one form to the other

Hi all
Can any one suggest me how to pass data from one form to the other form, which i zoomed from the original one?
I tried to do this by passing parameter in Event Procedure but i am getting error msg when i am opening the zoomed form.
If any one of u have any idea, give me a reply
Thank you
Suhasini

If you choose the second alternative you should erase these global variables after the second form is opened
You can erase the global variable using:
erase('global_var')
Greetings,
Sim

Passing data from one bsp application to another

Hi,
I have few queries that most of you would have done in ur projects:
1. I want to pass data from one bsp application to another:
eg based upon selected row of table view which populates material no and descriprion to another application which open the entire material master data.
Now, i have both the pages in diff bsp applications in place but unable to pass the selected material code to the second bsp application.
Had it been two different pages of same application I was able to achieve it with set parameter()
2. To stop the application from reprcessing the data:
eg: Suppose I have a bsp page where user fill details of a customer and on submitinng the details a customer is created in background and the entire page is disabled by my code. Even now if the user press refresh (F5) button then another customer gets created in the background. So basically i want to avoid the reprocess of the onSubmit event
Few lines of sample code would be very helpful.
Best Regards,
Saurabh Tripathi

Hi,
When I am writing the following code in appl1/page1:
        export abc from transactionID
        to data buffer lv_page_data.
        CALL METHOD CL_BSP_SERVER_SIDE_COOKIE=>SET_SERVER_COOKIE
          EXPORTING
            NAME                  = 'TRANSACTIONID'
            APPLICATION_NAME      = RUNTIME->application_name
            APPLICATION_NAMESPACE = RUNTIME->application_namespace
            USERNAME              = ls_name
            SESSION_ID            = runtime->session_id
            DATA_VALUE            = lv_page_data
            DATA_NAME             = 'lv_page_data'
and following code in appl2/page2:
CALL METHOD CL_BSP_SERVER_SIDE_COOKIE=>GET_SERVER_COOKIE
    EXPORTING
      NAME                  = 'TRANSACTIONID'
      APPLICATION_NAME      = RUNTIME->application_name
      APPLICATION_NAMESPACE = RUNTIME->application_namespace
      USERNAME              = ls_name
      SESSION_ID            = runtime->session_id
      DATA_NAME             = 'lv_page_data'
    CHANGING
      DATA_VALUE            = lv_page_data
   IF lv_page_data IS NOT INITIAL.
     IMPORT abc to transactionid
       FROM data buffer lv_page_data.
   ENDIF.
still the code doesn't work. Please explain and guide
Best Regards,
Saurabh Tripathi

Passing data from one frame to another frame

hello all, i am having a problem with passing data from one frame from another. I have a main frame when you click on connect button it display the second frame(class) that has 2 text fields and 2 buttons. When i click on connect it check if the data is correct. If the data is correct i want that frame to close and pass the data back to main frame. How can i do that.
thank you

hello all, i am having a problem with passing data
from one frame from another. I have a main frame when
you click on connect button it display the second
frame(class) that has 2 text fields and 2 buttons.
When i click on connect it check if the data is
correct. If the data is correct i want that frame to
close and pass the data back to main frame. How can
i do that.
thank you
the original problem sounded like an ideal opportunity to use Modal Dialog. if you want one frame to display another to get user input then you need to stop the method in the main frame from executing until you recieve a valid input.
you can use your own class and keep all of the components that you have in the connect frame but you would have to extend JDialog instead of JFrame.
there is a way around it!
if you must use JFrame for both, then you need to have access to the main frame in the connect frame, maybe pass the pointer to the constructor??
anyway, when the connect frame is done with its duties, you have to use the pointer to call another method in the main frame that will continue the process. otherwise main frame doesn't know when connect frame is done and by that time, the method in main frame that instantiated the connect frame has long since died.
also, it allows things to happen in the other window that you may not want to happen until the connect frame is done
typically users of software start clicking around on things and you could have three or four connect frames going at the same time
it's really best to use a Modal Dialog, it really can look just like a JFrame!!!!!!!!!!!!!!

What are Parameters? How are they differenet from Variables? Why can't we use variables for passing data from one sequnece to another? What is the advantage of using Parameters instead of Variables?

Hi All,
I am new to TestStand. Still in the process of learning it.
What are Parameters? How are they differenet from Variables? Why can't we use variables for passing data from one sequnece to another? What is the advantage of using Parameters instead of Variables?
Thanks in advance,
LaVIEWan
Solved!
Go to Solution.

Hi,
Using the Parameters is the correct method to pass data into and out of a sub sequence. You assign your data to be passed into or out of a Sequence when you are in the Edit Sequence Call dialog and in the Sequence Parameter list.
Regards
Ray Farmer

Passing data from one screen to another(web-dynpro) in SRM sourcing cockpit

HI Experts,
i am facing problem in passing data from one web-dynpro screen and assigning the data it to another web-dynpro screen.
my requirement is that when ever user selects a contract in PROPOSE SOURCES OF SUPPLY screen popup and press only assign only button, the data of the contract should be copied to the shopping cart.
i have already used the BADI BBP_DOC_CHANGE_BADI, but unfortunately it was not working.
so i tried to use the context, element and other web-dynpro fields to pass the data, i am able to pass the data from the popup to the second screen and able to assign it.
but when ever i deselect the shoppping cart which has been assigned with the data of the popup and select another shopping cart the data of the above shopping cart is cgetting changed.
i am unable to figure out the exact reason why this is happeing.i have written code in the ASSIGN ONLY button method to fetch the popup data and in the WDONMODIFYVIEW method of the second screen to assign the popup data to the shopping cart.
i have tried to bind the elements using the BIND_TABLE, BIND_STRUCTURE, BIND_ELEMENT, BIND_ELEMENTS methods, but nothing is working.
can anyone suggest me where i am making mistake and try to solve the issue.
Thanks
Tanveer

Dear Poster
Your thread has had no response since it's creation over
2 weeks ago, therefore, I recommend that you either:
- Rephrase the question.
- Provide additional Information to prompt a response.
- Close the thread if the answer is already known.
Thank you for your compliance in this regard.
Jason Boggans
SAP SRM SDN Moderator

How to pass control from one component to other component

Hi,
I have a requirement to pass control from one component to other component.
Here is my requirement.. l have two portal components, one is search component and other is result component. I have this search component as quick navigation iView where we can enter a value and results will display in results iView, it's a main iView.
When search view gets the results, I will display the count in search view and result in results view. .i.e.. both the iviews are viewed at any time.
Can any one advise me how to acheive this.
Thanks,
Chinna.

Hi Sandeep,
Thanks for the reply. I have gone through the EPCF API, and tried with doNavigate('iViewName').
when I click on the button in search view (quikc navigation frame), instead of page getting refreshed in result iView, whole page is replaced by results iview. I want only search view and results view gets refreshed.
can you please tell me which even should I use for this scenario...
Thanks,
Chinna

How to pass data from one internal session to another internal session

hi all sap experts ,
How to pass data from one internal session to another internal session and from oneExternal session to another external session.
Except : Import and Export parameters and SPA/GPA parameters.
Tell me the otherWay to pass data ..
Plz
Thanks in advance

hi,
abap memory management u will understand about this concept.
the import /export parameter will help u that passing data between two internal sessions by using abap memory.
for syntax
Passing Data Between Programs
There are two ways of passing data to a called program:
Passing Data Using Internal Memory Areas
There are two cross-program memory areas to which ABAP programs have access (refer to the diagram in Memory Structures of an ABAP Program) that you can use to pass data between programs.
SAP Memory
SAP memory is a memory area to which all main sessions within a SAPgui have access. You can use SAP memory either to pass data from one program to another within a session, or to pass data from one session to another. Application programs that use SAP memory must do so using SPA/GPA parameters (also known as SET/GET parameters). These parameters can be set either for a particular user or for a particular program using the SET PARAMETER statement. Other ABAP programs can then retrieve the set parameters using the GET PARAMETER statement. The most frequent use of SPA/GPA parameters is to fill input fields on screens (see below).
ABAP Memory
ABAP memory is a memory area that all ABAP programs within the same internal session can access using the EXPORT and IMPORT statements. Data within this area remains intact during a whole sequence of program calls. To pass data to a program which you are calling, the data needs to be placed in ABAP memory before the call is made. The internal session of the called program then replaces that of the calling program. The program called can then read from the ABAP memory. If control is then returned to the program which made the initial call, the same process operates in reverse. For further information, refer to Data Clusters in ABAP Memory.
Filling Input Fields on an Initial Screen
Most programs that you call from other programs have their own initial screen that the user must fill with values. For an executable program, this is normally the selection screen. The SUBMIT statement has a series of additions that you can use to fill the input fields of the called program:
Filling the Selection Screen of a Called Program
You cannot fill the input fields of a screen using additions in the calling statement. Instead, you can use SPA/GPA parameters. For further information, refer to Filling an Initial Screen Using SPA/GPA Parameters.
Message was edited by:
sunil kumar
Message was edited by:
sunil kumar

How to pass data from one internal session to another

Hi SAP Experts,
How to pass data from one internal session to another and from One external session to another external session. I used import and export parmeter and SPA/GPA parameters. What is the other way to pass data?
Please tel me urgently
Thank you
Basu

Memory Structures of an ABAP Program
In the Overview of the R/3 Basis System you have seen that each user can open up to six R/3 windows in a single SAPgui session. Each of these windows corresponds to a session on the application server with its own area of shared memory.
The first application program that you start in a session opens an internal session within the main session. The internal session has a memory area that contains the ABAP program and its associated data. When the program calls external routines (methods, subroutines or function modules) their main program and working data are also loaded into the memory area of the internal session.
Only one internal session is ever active. If the active application program calls a further application program, the system opens another internal session. Here, there are two possible cases: If the second program does not return control to the calling program when it has finished running, the called program replaces the calling program in the internal session. The contents of the memory of the calling program are deleted. If the second program does return control to the calling program when it has finished running, the session of the called program is not deleted. Instead, it becomes inactive, and its memory contents are placed on a stack.
The memory area of each session contains an area called ABAP memory. ABAP memory is available to all internal sessions. ABAP programs can use the EXPORT and IMPORT statements to access it. Data within this area remains intact during a whole sequence of program calls. To pass data to a program which you are calling, the data needs to be placed in ABAP memory before the call is made. The internal session of the called program then replaces that of the calling program. The program called can then read from the ABAP memory. If control is then returned to the program which made the initial call, the same process operates in reverse.
All ABAP programs can also access the SAP memory. This is a memory area to which all sessions within a SAPgui have access. You can use SAP memory either to pass data from one program to another within a session, or to pass data from one session to another. Application programs that use SAP memory must do so using SPA/GPA parameters (also known as SET/GET parameters). These parameters are often used to preassign values to input fields. You can set them individually for users, or globally according to the flow of an application program. SAP memory is the only connection between the different sessions within a SAPgui.
The following diagram shows how an application program accesses the different areas within shared memory:
In the diagram, an ABAP program is active in the second internal session of the first main session. It can access the memory of its own internal session, ABAP memory and SAP memory. The program in the first internal session has called the program which is currently active, and its own data is currently inactive on the stack. If the program currently active calls another program but will itself carry on once that program has finished running, the new program will be activated in a third internal session.
Data Clusters in ABAP Memory
You can store data clusters in ABAP memory. ABAP memory is a memory area within the internal session (roll area) of an ABAP program and any other program called from it using CALL TRANSACTION or SUBMIT.
ABAP memory is independent of the ABAP program or program module from which it was generated. In other words, an object saved in ABAP memory can be read from any other ABAP program in the same call chain. ABAP memory is not the same as the cross-transaction global SAP memory. For further information, refer to Passing Data Between Programs.
This allows you to pass data from one module to another over several levels of the program hierarchy. For example, you can pass data
From an executable program (report) to another executable program called using SUBMIT.
From a transaction to an executable program (report).
Between dialog modules.
From a program to a function module.
and so on.
The contents of the memory are released when you leave the transaction.
To save data objects in ABAP memory, use the statement EXPORT TO MEMORY.
Saving Data Objects in Memory
To read data objects from memory, use the statement IMPORT FROM MEMORY.
Reading Data Objects from Memory
To delete data clusters from memory, use the statement FREE MEMORY.
Deleting Data Clusters from Memory
please read this which provide more idea about memory
Message was edited by:
sunil kumar

Passing data from one UIX XML page to another UIX XML page

What are the various ways of passing data from one UIX XML page to another UIX XML page?
(a) If no bc4j is used.
(b) If bc4j is used.
(c) If my event handler calls:-
public static EventResult handleMyEventEvent( BajaContext context, Page page, PageEvent event) throws Throwable
then how can I pass data to the next UIX XML page?
Thanks,
Paul.

What are the various ways of passing data from one UIX XML page to another UIX XML page?
(a) If no bc4j is used.For forwarded URLs; HttpServletRequest attributes [request], HttpSession attributes [session], ServletContext attributes [application].
For redirected URLs; HttpServletRequest parameters url, HttpSession attributes [session], ServletContext attributes [application].
(b) If bc4j is used.For forwarded URLs; BC4J Session properties.
For redirected URLs; BC4J Session properties IF release mode is NOT stateless.
(c) If my event handler calls:-
public static EventResult handleMyEventEvent( BajaContext context, Page page, PageEvent event) throws Throwable
then how can I pass data to the next UIX XML page?Return a UIEventResult (extends EventResult) from your event handler that has a data provider attached.
This data provider will be accessible in the next page with the name "ctrl:eventResult", where "ctrl" is the short prefix for the namespace "http://xmlns.oracle.com/uix/controller".
Regards,
John Fallows
Oracle Corporation.

How to move BCS data from one box to other

Hello Expert,
Dose any one know how to move BCS data from one box to other box ?
Thanks & Regards,

1) The best is to do the test. In my case, my customer was just doing this transfer (in full) to perform tests on the BEX reportings. Actually, they never raised any issue regarding document number when they did additional postings in test system... I would also say that during the transfer, the number counter in Qual gets not synchronized with the one in Prod. So, I think the system will just take the next number available in Qual. Should not be an issue.
2) As explained in answer 1), in my case, the purpose was not to perform data migration from one system to the other one. Thus, my customer never performed a subsequent consolidation in the target system. But, basically, the transfer copies all data : posting levels 00 to 30, for all periods you have selected + Additional financial data and sequence of activities. Thus, for me, everyhting is available in the target system, including COI documents. In other words, the "picture" regarding the data should be exactly the same between both system. The only thing you need to pay attention to is the customizing : it must be the same in Qual and Prod (example : date of acquisition and divestiture, structure of the group, etc...).
Another very important thing, is that your export data source must not be enriched due to the BCS Delta load scenario. If it is the case, the system will write the consolidation logic (i-e the consolidation group + reporting mode) when transferring the data from the source Real Time Infocube to the Target Real time infocube, which will lead to inconsistent data in the target system.

Passing Data From One Component To The Node Of An Other Component

Hi Experts,
I have a component A (parent) in which i am usuing an other component B (child) . From the parent component i am able to pass data to the child component by using one of the child's interface node but when i try to use one of the parents interface nodes to pass data from the child to the parent component i am unable to pass data as required .
Please tell me where i am going wrong.
Thanks In Advance,
Chaitanya.

In Component B, check the property of the Interface node Input Element( Ext.) tick it.
Now, bind the node like the one we do in ALV
Abhi

Passing data from one view to other in differnt window

Similar Messages

Maybe you are looking for