Passing Multiple Single Values from Sender Query to Receiver Query in RRI

Dear All.
We have 2 - Bex Reports ZBEX_1 & ZBEX_2
1. In ZBEX_1 having the fileds data like the below.
Account Doc. Number - Clearing Document --- Amount
12345                  - 65432                --- 100
12346                  - 54321               --- 50
2. In ZBEX_2 having the following data.
Account Doc.Number -- Amount
45342                     - 10
66666                        - 100
65432                       -   10
54321                      - 5
3. I am Traying to create RRI Between ZBEX_1 & ZBEX_2 , with Sender query as ZBEX_1 and Receiver query as ZBEX_2
If I drilldown from ZBEX_1 need to show the following output in the ZBEX_2
Account Doc. Number - Amount
65432                       -     10
54321                      -     5
i.e If Clearing Documnet in the ZBEX_1 is same as Account Doc. Number in ZBEX_2 those Account Doc. Numbers I have to show in the output of ZBEX_2 RRI Report.
Both the records I have to show at a time.
So please suggest me
1. How to pass Multiple Single Values to Next Query using RRI
2. How to Map Clearing Document to Account Doc. Number in RRI.
NOTE: Account Doc. Num length is same as Clearing Document
Please suggest me.
Thanks & Regards,
Kiran Manyam

Your scenario of passing values from multiple records in Source does not suit well for RRI Jumps.
In ZBEX_2 query, create a Replacement path variable on Clearing Document. In that Replacement path variable, use the Replacement with query option and choose the ZBEX_1 as the underlying query source.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/bd/589b3c494d8e15e10000000a114084/frameset.htm
When you execute ZBEX_2, what ever clearing document values that ZBEX_1 has will be passed through the replacement path variable as a filter to the ZBEX_2
Hope it helps!
Uday Pothireddy

Similar Messages

Passing multiple single values from R/3 BAPI to BW Query in VC

Hi Experts
I have a VC model where I am calling an R/3 BAPI which is returning a table of customer accounts. I'm trying to go directly from that BAPI to a BW Query and pass the table of accounts into the BW Query.
The BW Query has been set up with a variable to accept multiple single values for accounts, and I have mapped the correct output field from the BAPI to the correct input field on the Query.
The BAPI does not seem to be passing the table of accounts into the Query. If I hard code a single account in the mapping of the BAPI to Query call, the Query successfully returns the data I expect.
Can I pass a table of accounts to a BW Query in this way?
Many Thanks
Tom

Hi
Have you tried with 'Group & Combine' operator. Just add this operator & join your BAPI & BI Query to this. Then in ths configure of this oparator select the 'Accoount' field & gourp the data accordingly. Also specify the aggregation if required. & in the table/chart after the operator select the fields which you want to show.
I hope this is what you are looking for.
Regards
Sandeep

Passing multiple character values from parameter form to PL/SQL

Hi,
I am passing multiple character values from parametr form into
the report query and a PL/SQL procedure. It works fine with the
query, when I use &variable. But, it doesn't compile in PL/SQL,
so I just used the :variable, but not getting any records in the
PL/SQL procedure. Any suggestions?
sincerely,
gj

gj / Fedro,
Only using the &referecne, you can pas a string / multiple character values and this would work for query only.
The bind parameter in PL/SQL wouls support only single value
Thanks
The Oracle Reports Team

Passing Multiple Single values in User Exits

Hello All,
I have a requirement where in, a user could enter either a single value, multiple single values or a combination of a range and single values.
This set of values need to be passed on to a variable with in a user exit. I have been able to get either one single value to pass or one single range. I am unable to pass on multiple single values or a combo of a range and single value from the user entry.
I would appreciate if anyone could help me with the structure of the code to pass multiple single values or combo.
I was wondering if I would need to pass the values into an internal table first and then pass it to the user exit variable. However, as I am not a strong ABAP resource, I am struggling.
Any and all help is deeply appreciated.
Warm regards
Sunil

Hello Marc,
There are two requirements which I was trying to address.
1. IN few queries, the users enter either a range of profit centers or multiple single values in the pop-up window. I need to pass those values from that variable to an variable of type USer Exit to derive partner profit center values with in the query.
For this I have been able to pass values for either a single value or a single range. I am unable to pass on values for multiple single values or a combo of a range and single values.
2. I am trying to create a query for the top 5 customers to be used in the Corporate Performance Monitor. However, when I am trying to use the variable of type "replacement path", the system does not allow me to release it for OLE DB for OLAP.
To obviate this problem, I was hoping to create a variable of typeUSer Exit" and then pass the values from the variable of type "replacement path" to this variable.
Is it a workable solution? I was hoping that the method to pass the values in both the above scenarios might be similar.
Please guide me.
Warm regards
Sunil

How to pass multiple single values to parameter in planning function?

Hi!
I can not pass the variables (multiple single Values) from Input Layouts(BexAnalyzer) to Planning Function Types...Anyone have any idea for setting the parameter in the function types. I use the exit class CL_RSPLFC_BPS_EXITS.
My Parameter Type is Elementary and also use variables allowed

If you want to use the class as in a planning function type, proceed as follows:
1. Create an InfoObject that accepts the name of the function module as a characteristic value. We recommend that you create an InfoObject of type character with length 30 and indicate that this InfoObject is "Without Master Data".
2. In transaction RSPLF1, create a new function type. Chose the "Reference Data" option and enter the name of the class. This does NOT imply that reference data is read automatically, but results from the requirements for implementing the class.
3. On the "Parameter" tab page, create two parameters - one for the exit module and one for the init module. The parameters should be "elementary". Chose the InfoObject you created in step two as the dedicated InfoObject. The names of the parameters are determined from the values of constant P_C_NAME_EXIT_PARAM and P_C_NAME_INIT_PARAM.
4. If you require additional parameters in your function module (called exit parameters), you create these parameters as elementary parameters (with appropriate InfoObjects). Note an additional predefined parameter here - in many function modules, the name of the area is used from which the module is called. The area is not used in BI Integrated Planning but it may be the case that an area was created in BPS which only uses the current InfoCube. For this reason, you can create a parameter with the name specified in constant P_C_NAME_AREA_PARAM by specifying the name of this area to the function module. The value of this parameter is passed on to the function module in the interface as the value of the importing parameter I_AREA. Note that this technology can generally only by used for Basis InfoCubes and simple planning areas (not multi- planning areas or MultiProviders).
You can create additional elementary parameters as long as the names do not correspond to the predefined names. The class automatically recognizes the additional parameters and transfers them to table IT_EXITP in the function modules.
5. After you have activated the planning function type, you can create planning functions and fill the parameters accordingly.

Passing multiple single values to a Planning Sequence

Hi All,
      We are using BEx Analyzer for planning. We are passing multiple single values for a single variable , to a IP-planning sequence. Planning sequence is only taking the last value passed and ignoring the rest.
Multiple variable values are passed as below:
Name                            Index                 Value
VAR_NAME_1     1     ZCC
VAR_LINES     1     5
VAR_VALUE_1     1     A10000001
VAR_VALUE_1     1     A10000002
VAR_VALUE_1     1     A10000003
VAR_VALUE_1     1     A10000004
VAR_VALUE_1     1     A10000005
These cell references are passed to "command button" through the "Command Range" property.
The values are calculated correctly but for only one Cost center (last one in the list) , In this case only data for the Cost Center "A10000005" is processed and rest of the cost centers are ignored.
What am I missing here? I appreciate your help.
Patch Levels:
SAP GUI 7.10 (Patch 16)
BEx Analyzer 7.X SP 12
Thank you,
Math

Hi Indu Sharma - I have tried several combinations, but did not work.
VAR_VALUE_1
VAR_VALUE_2
VAR_VALUE_3
VAR_VALUE_4
VAR_VALUE_5
VAR_VALUE_1
VAR_VALUE_1
VAR_VALUE_1
VAR_VALUE_1
VAR_VALUE_1
VAR_VALUE_EXT_1
VAR_VALUE_EXT_2
VAR_VALUE_EXT_3
VAR_VALUE_EXT_4
VAR_VALUE_EXT_5
Thank you,
Math

Passing multiple single values in Customer Exit Variables

Hi,
I have one requirement to Pass multiple single values in Customer Exit Variable.
If the user gives 2010 i need to get value previous fisacal year(2009),if its 2009, we need to get 2009.
Just requirement is like how to pass multiple single values?
Thanks.

Hi..
For this create a variable- Types of variable= Characteristics Value> Processing type as Customer Exit-->Reference Char as Fiscal year..
Try this code..
    when 'xxxx'.
      DATA: lv_zp0003_month(2) TYPE n,
              lv_zp0003_year(4) TYPE n.
      CLEAR: lv_zp0003_month, lv_zp0003_year.
      lv_zp0003_month = sy-datum+4(2).
      lv_zp0003_year = sy-datum(4).
If the month is January the year is set to previous year
      IF lv_zp0003_month = '01'.
        lv_zp0003_year = lv_zp0003_year - 1.
       l_s_range-low = lv_zp0003_year.
Else the year is set to actual
      ELSE.
        l_s_range-low = lv_zp0003_year.
      ENDIF.
      IF l_s_range-low = l_s_range-high.
        l_s_range-opt = 'EQ'.
      ELSEIF l_s_range-high IS INITIAL.
        l_s_range-opt = 'EQ'.
      ELSEIF l_s_range-low LT l_s_range-high.
        l_s_range-opt = 'BT'.
      ENDIF.
      l_s_range-sign = 'I'.
      APPEND l_s_range TO e_t_range.
Hope this helps.
Regards.
AKG

Passing multiple single values in VC

I have a model where ii have 2 views Detail & Summary. Im passing some values from one table to another using a intermediate query. Its not passing multiple values. My wauery has variable set as 'Multiple Single Values'. If i pass a single value it works.
Im on VC FLEX2 SP14.
Cheers,
Vikram

Hi
Go to the properties of first table -> Selection -> Multiple selection. Then join output of this table to your intermediate query through variable port & then drag second table. Also in joining line -> assigned field use 'infoobject name_key' for every field for which you are passing the values.
Regards
Sandeep

Passing multiple session values from cold fusion into a flash movie

Hello all,
I know that to pass multiple variables into a flash movie
you could use the embed tag like this(with the & between each
variable):
<embed
flashvars="variable1=value1&variable2=value2"
></embed>
Now to pass a single session variable from coldfusion in i
did the following; which worked:
<embed
src="ASdb.swf"
FlashVars="UserName=<cfoutput>#session.userName#</cfoutput>"
width="550" height="400" autostart="true">
</embed>
Note that i had to use the cfoutput tags to get the value
stored in the variables. Now; i tried to do the same thing for two
session variables and the second one does not get read in. Here was
my code:
<embed src="ASdb.swf"
FlashVars="UserName=<cfoutput>#session.userName#</cfoutput>&testTypeID=<cfoutput>#session .testTypeID#</cfoutput>"
width="550" height="400" autostart="true">
</embed>
Can someone please tell me what I am doing wrong? Thank you
very much in advance.

Hold on there was a little error: My final code that did not
work was the following:
<embed src="ASdb.swf"
FlashVars="UserName=<cfoutput>#session.userName#</cfoutput>&testTypeID
=<cfoutput>#session.testTypeID#</cfoutput>"
width="550" height="400" autostart="true">
</embed>

Passing multiple select value from BI publisher to PL/SQL functions

Hi - I have designed a report which pass parameters (Multi select) into a function to get the output result. When a single parameter value is passed to the function, report is being displayed. When multi select value is passed to the function it is returning the error `wrong number or types of arguments in call to 'F_PROCESS_WAVE_DATA'. When i checked the parameters passed to the function, i can see each multi select value is treated as different value and is assigned to different parameter in the function.
Any help on passing the multi select parameter into function will be helpful.
Regards,
Vikram.

All - Issue was resolved. I followed the following steps to resolve the issue
1. Create a PL/SQL table type variable as VARCHAR2 in the database - Say as Larray
2. Create PL/SQL type record and table for the record in database. Lrec, Ltable
3. In BI report pass multiple select LOV variable as Larray(variable).
4. In DB function, Parameter should be defined as LARRAY.
5. Return PL/SQL table type Ltable from the function.
Regards,
Vikram.

How to pass wild card '%' value from the parameter to the query

Hello everyone,
I have following 2 problems
1) I was trying to do some thing like below
select * from emp
where ename like 'J%'
for this i have used the following code
select * from emp
where ename like :P_ENAME
and before running the query in the parameter box i entered J%. But my report returns an error which says INVALID PARAMETERS REQUESTED.
2) I have a req of passing both comma separated and wild card for the same parameter. If we take the same example as above,
user should be able to enter
a) JASON, SMITH, JOHN OR b) J%
I have used comma separated value option of the parameter for the csv values and its working fine, but i need to add the wild card feature also to the same parameter.
Can anyone please help me with these things?????
Thanks in advance!!
Raghu

Hi Raghu,
I guess you are in older version, You have to get into latest version to use %, it should work well
you should use where ( ename like :P_ENAME ) or ( ename in (:P_ENAME)) for both the condition to satisfy.

Invalid navigation state. Multiple dimension values from model

We are getting following error on the endeca server in production environment and we are not able to reproduce it in the lower environment, can some body expains what this error means and how this occurs
WARN 03/17/13 20:59:39.418 UTC (1363553979418) DGRAPH {dgraph} Error processing HTTP exchange 797486: Invalid input : Invalid navigation state. Multiple dimension values from model (18,"Product Aisle") in query nav state.
WARN 03/17/13 21:00:27.575 UTC (1363554027575) DGRAPH {dgraph} Error processing HTTP exchange 798401: Invalid input : Invalid navigation state. Multiple dimension values from model (18,"Product Aisle") in query nav state.
WARN 03/17/13 21:01:31.394 UTC (1363554091394) DGRAPH {dgraph} Error processing HTTP exchange 800340: Invalid input : Invalid navigation state. Multiple dimension values from model (18,"Product Aisle") in query nav state.
WARN 03/17/13 21:01:43.216 UTC (1363554103216) DGRAPH {dgraph} Error processing HTTP exchange 800577: Invalid input : Invalid navigation state. Multiple dimension values from model (18,"Product Aisle") in query nav state.
WARN 03/17/13 21:02:39.912 UTC (1363554159912) DGRAPH {dgraph} Error processing HTTP exchange 801775: Invalid input : Invalid navigation state. Multiple dimension values from model (4,"Form") in query nav state.

Hello Tijomon,
Looking at the warning it seems the query being build is not good. Some possibilities are:
~ you have multi select enabled in the front end on a single select dimension
~ the index was moved from one environment to other and some of the dimension values do not match (due to the state being different)
HTH,
Pankaj.

Multiple Single Values in Characteristic Variable

Hi,
I set up a characteristic variable in the Query Designer and opt for "multiple single values" . When I execute the query, the variable dialog box does not give me those check boxes which I can use to check which values I want to see in the report.
How come? Can you help me with that?
Thanks,
Sabine

Hi Sabine.
Did you remember to set the variable processing type as a user entry?
In the query designer do you see the characteristic restricted to a variable?
BR
Stefan

Subject: BW Query Variable – Multiple Single Values

I have set a characteristic variable on process chain id. In General tab, Variable is u201Cprocess by manual inputu201D.
In Details tab, I set:
Variable represents Multiple Single Values, Variable is ready for Input
When I run my query, I can select multiple process chain ids. Problem is query returns process chain information for only one value (first value entered for process chain id in multiple selections. I have verified process chain information exists for all the multiple values.
Appreciate any feedback.

Thanks, I do not find any other restrictions. If I simply remove the variable which lets me spacify multiple single values, I see
all the process chains. When I add this variable to query under retsriction and run the query, I see pop-up and I can enter multiple values, but only first one is being searched. There is probably some setting in variable definition somewhere that it only processes first value.
Is there a way in RSRT to show me entire ABAP code of the query.
I ran RSRT set some break points but it is kind hard to troubleshoot. If I had the entire code, I can try to understand what is being done.

Passing multiple integer values as parameter in SSRS

Hello,
I am trying to pass a comma separated multiple integer value parameter in SSRS report and it errors out complaining that it is not able to convert the nvarchar value to datatype int. But it works fine when I pass a single value. Here is the code I am using
for the report and I am stuck at passing multiple values.
SELECT
id,count(*) as cnt
from table
and ID in (@id) group by id
eg: if I pass 10,20,30 then I would get error however if I pass 10 then it works fine
Is there a different method to pass multiple integer values?
Thanks for your help.

A comma is, of course, a textual character and not an integer, thus the error you are getting. Multi-value parameters can be used for this.
Select "Allow multiple values"and set data type to Integer. Multi-value parameters deliver the values as an array. The query interface is smart enough to convert them to the proper syntax (comma-delimited) automatically so a statement like:
WHERE Field IN (@id)
where the parameter has an array of values {1, 2, and 3} is interpreted as:
WHERE Field IN (1,2,3)
You do not need to manually convert it in a transact SQL query. That is not the case for displaying the value array in your report. If you wish to display the array (described above) in your report as "1, 2, 3", you will need to use a join expression:
=Join(@id, ", ")
As DJ described, the other part to a multivalue parameter is the Available values. These can be set explicitly but given your example, I think it would be best to create a new dataset that retrieves a distinct list of the IDs that can be retrieved, perhaps
something like:
SELECT DISTINCT GroupName, GroupID
FROM table
WHERE [criteria]
Set the available values to use this query with GroupName (or whatever user-friendly field you choose for your dataset) as the label and the id as the value. The label field should be something the the target report user can easily identify the correct group
using.
If you don't want to or can't use a multivalue parameter for some reason then you will need to manipulate your parameter value prior to consuming it in your query. When you add the parameter to the TSql query and save the dataset, SSRS adds it to the Parameters
property of the dataset. Open the dataset properties and select the parameters tab. You should see your parameter in the list. click the expression builder (fx) button next to the value and enter this expression:
=Split(@id,",")
Note that the second element of the expression is the delimiter. If your text input has comma-space as a delimiter (1, 2, 3 vs 1,2,3) then that element must include ", ". My example just has comma so if you use that with a string "1, 2, 3"then
the resulting array will still have 3 elements but the 2nd and 3rd elements of the array will have a preceding space which will cause your dataset to error with the same error. As long as there are no non-numeric characters in any of the elements, the split6
will create the text array, SSRS will dynamically generate the correct "IN"syntax (comma separated) and SQL will convert the elements from VARCHAR to INT on the fly.
"You will find a fortune, though it will not be the one you seek." -
Blind Seer, O Brother Where Art Thou
Please Mark posts as answers or helpful so that others may find the fortune they seek.

Passing Multiple Single Values from Sender Query to Receiver Query in RRI

Similar Messages

Maybe you are looking for