Passing parameters from one OAF page to another OAF PAge

Hello
I was wondering, if there is a possibility of passing request parameters from one page to another page in EBS ( E-Business Suite).
I tried using the following
a) PageContext.putParamater ( "MyParamater", "ParamaterValue")
b) I addded the above line of code by extending an page controller of the OAF page and personalized the page
When I am trying to retrieve the value by getParameter() in the next page. I am also unable to get access to the parameter in the next page.
I am trying the above code while trying to create expenses in I-Expense module...I would like to pass the ReportHeaderId from one page to another page for customization purposes. I Am not able to get ReportHeaderId in the ReviewPAge...There are no Business Objects in the Review page...hence trying the putParameter idea.
Any help will be highly appreciated
Thank You

What is the source of the parameter? If the source is a VO, you can use the method I have specified in my previous post regarding updating the button properties. For example, you can include the param in the destination URL of the button as such:
OA.jsp?page=/xyz/oracle/apps/.../myPG&retainAM=Y&addBreadCrumb=Y&myParam={@ParamSource}
where ParamSource is an attribute from a VO.
You can get this value via oapagecontext.getParameter()
Can you please give details as to the source of your params (param-1, param-2, etc.). This will help in providing you suggestions.
Regards,
LC

Similar Messages

How can I pass parameters from one process flow to another process flow?

How can I pass parameters from one process flow to another process flow (sub process) in warehouse builder? let me know the steps I have to do in warehouse builder.
Thanks in advance,
Kishan

Hi Kishan,
Please post this question to the Warehouse Builder forum:
Warehouse Builder
Thanks, Mark

Can you pass parameters from one application component to another?

I want to have a page of portlets showing applications components (small forms, reports etc) with co-ordinated information.
That is, I want the user to enter a single criterion in a portlet and then I want all the portlets to respond by querying the results for that single criterion.
I'm building an interface for a system based on normalized tables with many-to-many relationships and therefore intersecting-entities.
(I looked at master-detail forms under webdb, so I don't think they'll do the job. I have data from about 6 tables that I want co-ordinated.)
Links also don't seem to be what I want, because I don't want extra clicks or one portlet to be replaced by another.
I've seen the Parameter Passing example, and that is the sort of coordination I'd like. In fact that's what gave me the idea. But that is based on custom database portlets, whereas I really want to use Portal forms and reports.
Is this possible?
null

The general Oracle9iAS Portal forum is your best bet for this question.

Getting error , while passing parameters from one page to another page

Hello friends,
i am getting error, while passing parameters from one page to another page, below code i wrote.
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
ArrayList arl=new ArrayList();
EresFrameworkAMImpl am=(EresFrameworkAMImpl)pageContext.getApplicationModule(webBean);
ERecordImpl ERecordObj=new ERecordImpl();
HashMap hMap = new HashMap();
hMap.put("1",ERecordObj.getTransactionName());
hMap.put("2",ERecordObj.getTransactionKey());
hMap.put("3",ERecordObj.getDeferredMode());
hMap.put("4",ERecordObj.getUserKeyLabel());
hMap.put("5",ERecordObj.getUserKeyValue());
hMap.put("6",ERecordObj.getTransactionAuditId());
hMap.put("7",ERecordObj.getRequester());
hMap.put("8",ERecordObj.getSourceApplication());
hMap.put("9",ERecordObj.getPostOpAPI());
hMap.put("10",ERecordObj.getPayload());
// hMap.put(EresConstants.ERES_PROCESS_ID,
if(pageContext.getParameter("item1")!=null)
pageContext.forwardImmediately(EresConstants.EINITIALS_FUNCTION,
OAWebBeanConstants.KEEP_MENU_CONTEXT,
null,
hMap,
true,
OAWebBeanConstants.ADD_BREAD_CRUMB_YES
Error(71,2): method forwardImmediately(java.lang.String, byte, null, java.util.HashMap, boolean, java.lang.String) not found in interface oracle.apps.fnd.framework.webui.OAPageContext
Thanks
krishna.

Hi,
You have imported the wrong class for HashMap.
Import
com.sun.java.util.collections.HashMap; instead of java.util.HashMap
Thanks,
Gaurav

Passing Parameters from One Screen to Another Screen

Hi All,
I need to Pass Parameters from one Module Pool Screen to Another Screen.
I have two Parameters in First screen. I don't want to use Export and Import
The first screen record should sit in the Second Screen as it is.
Please suggest me.
Thanks and Regards,
Prabhakar Dharmala

An Idea,
Create a function group, in that define global variables. Then create two function module. Pass variable from one function module and get in the another one.
Hope this will help you to solve. If you need further help I will create and sent you a test code.
Darshan.
Pl. Reward points to the helpful answer, it motivates us to answer more

Passing data from one bsp application to another

Hi,
I have few queries that most of you would have done in ur projects:
1. I want to pass data from one bsp application to another:
eg based upon selected row of table view which populates material no and descriprion to another application which open the entire material master data.
Now, i have both the pages in diff bsp applications in place but unable to pass the selected material code to the second bsp application.
Had it been two different pages of same application I was able to achieve it with set parameter()
2. To stop the application from reprcessing the data:
eg: Suppose I have a bsp page where user fill details of a customer and on submitinng the details a customer is created in background and the entire page is disabled by my code. Even now if the user press refresh (F5) button then another customer gets created in the background. So basically i want to avoid the reprocess of the onSubmit event
Few lines of sample code would be very helpful.
Best Regards,
Saurabh Tripathi

Hi,
When I am writing the following code in appl1/page1:
        export abc from transactionID
        to data buffer lv_page_data.
        CALL METHOD CL_BSP_SERVER_SIDE_COOKIE=>SET_SERVER_COOKIE
          EXPORTING
            NAME                  = 'TRANSACTIONID'
            APPLICATION_NAME      = RUNTIME->application_name
            APPLICATION_NAMESPACE = RUNTIME->application_namespace
            USERNAME              = ls_name
            SESSION_ID            = runtime->session_id
            DATA_VALUE            = lv_page_data
            DATA_NAME             = 'lv_page_data'
and following code in appl2/page2:
CALL METHOD CL_BSP_SERVER_SIDE_COOKIE=>GET_SERVER_COOKIE
    EXPORTING
      NAME                  = 'TRANSACTIONID'
      APPLICATION_NAME      = RUNTIME->application_name
      APPLICATION_NAMESPACE = RUNTIME->application_namespace
      USERNAME              = ls_name
      SESSION_ID            = runtime->session_id
      DATA_NAME             = 'lv_page_data'
    CHANGING
      DATA_VALUE            = lv_page_data
   IF lv_page_data IS NOT INITIAL.
     IMPORT abc to transactionid
       FROM data buffer lv_page_data.
   ENDIF.
still the code doesn't work. Please explain and guide
Best Regards,
Saurabh Tripathi

How to pass data from one internal session to another internal session

hi all sap experts ,
How to pass data from one internal session to another internal session and from oneExternal session to another external session.
Except : Import and Export parameters and SPA/GPA parameters.
Tell me the otherWay to pass data ..
Plz
Thanks in advance

hi,
abap memory management u will understand about this concept.
the import /export parameter will help u that passing data between two internal sessions by using abap memory.
for syntax
Passing Data Between Programs
There are two ways of passing data to a called program:
Passing Data Using Internal Memory Areas
There are two cross-program memory areas to which ABAP programs have access (refer to the diagram in Memory Structures of an ABAP Program) that you can use to pass data between programs.
SAP Memory
SAP memory is a memory area to which all main sessions within a SAPgui have access. You can use SAP memory either to pass data from one program to another within a session, or to pass data from one session to another. Application programs that use SAP memory must do so using SPA/GPA parameters (also known as SET/GET parameters). These parameters can be set either for a particular user or for a particular program using the SET PARAMETER statement. Other ABAP programs can then retrieve the set parameters using the GET PARAMETER statement. The most frequent use of SPA/GPA parameters is to fill input fields on screens (see below).
ABAP Memory
ABAP memory is a memory area that all ABAP programs within the same internal session can access using the EXPORT and IMPORT statements. Data within this area remains intact during a whole sequence of program calls. To pass data to a program which you are calling, the data needs to be placed in ABAP memory before the call is made. The internal session of the called program then replaces that of the calling program. The program called can then read from the ABAP memory. If control is then returned to the program which made the initial call, the same process operates in reverse. For further information, refer to Data Clusters in ABAP Memory.
Filling Input Fields on an Initial Screen
Most programs that you call from other programs have their own initial screen that the user must fill with values. For an executable program, this is normally the selection screen. The SUBMIT statement has a series of additions that you can use to fill the input fields of the called program:
Filling the Selection Screen of a Called Program
You cannot fill the input fields of a screen using additions in the calling statement. Instead, you can use SPA/GPA parameters. For further information, refer to Filling an Initial Screen Using SPA/GPA Parameters.
Message was edited by:
sunil kumar
Message was edited by:
sunil kumar

How to pass data from one internal session to another

Hi SAP Experts,
How to pass data from one internal session to another and from One external session to another external session. I used import and export parmeter and SPA/GPA parameters. What is the other way to pass data?
Please tel me urgently
Thank you
Basu

Memory Structures of an ABAP Program
In the Overview of the R/3 Basis System you have seen that each user can open up to six R/3 windows in a single SAPgui session. Each of these windows corresponds to a session on the application server with its own area of shared memory.
The first application program that you start in a session opens an internal session within the main session. The internal session has a memory area that contains the ABAP program and its associated data. When the program calls external routines (methods, subroutines or function modules) their main program and working data are also loaded into the memory area of the internal session.
Only one internal session is ever active. If the active application program calls a further application program, the system opens another internal session. Here, there are two possible cases: If the second program does not return control to the calling program when it has finished running, the called program replaces the calling program in the internal session. The contents of the memory of the calling program are deleted. If the second program does return control to the calling program when it has finished running, the session of the called program is not deleted. Instead, it becomes inactive, and its memory contents are placed on a stack.
The memory area of each session contains an area called ABAP memory. ABAP memory is available to all internal sessions. ABAP programs can use the EXPORT and IMPORT statements to access it. Data within this area remains intact during a whole sequence of program calls. To pass data to a program which you are calling, the data needs to be placed in ABAP memory before the call is made. The internal session of the called program then replaces that of the calling program. The program called can then read from the ABAP memory. If control is then returned to the program which made the initial call, the same process operates in reverse.
All ABAP programs can also access the SAP memory. This is a memory area to which all sessions within a SAPgui have access. You can use SAP memory either to pass data from one program to another within a session, or to pass data from one session to another. Application programs that use SAP memory must do so using SPA/GPA parameters (also known as SET/GET parameters). These parameters are often used to preassign values to input fields. You can set them individually for users, or globally according to the flow of an application program. SAP memory is the only connection between the different sessions within a SAPgui.
The following diagram shows how an application program accesses the different areas within shared memory:
In the diagram, an ABAP program is active in the second internal session of the first main session. It can access the memory of its own internal session, ABAP memory and SAP memory. The program in the first internal session has called the program which is currently active, and its own data is currently inactive on the stack. If the program currently active calls another program but will itself carry on once that program has finished running, the new program will be activated in a third internal session.
Data Clusters in ABAP Memory
You can store data clusters in ABAP memory. ABAP memory is a memory area within the internal session (roll area) of an ABAP program and any other program called from it using CALL TRANSACTION or SUBMIT.
ABAP memory is independent of the ABAP program or program module from which it was generated. In other words, an object saved in ABAP memory can be read from any other ABAP program in the same call chain. ABAP memory is not the same as the cross-transaction global SAP memory. For further information, refer to Passing Data Between Programs.
This allows you to pass data from one module to another over several levels of the program hierarchy. For example, you can pass data
From an executable program (report) to another executable program called using SUBMIT.
From a transaction to an executable program (report).
Between dialog modules.
From a program to a function module.
and so on.
The contents of the memory are released when you leave the transaction.
To save data objects in ABAP memory, use the statement EXPORT TO MEMORY.
Saving Data Objects in Memory
To read data objects from memory, use the statement IMPORT FROM MEMORY.
Reading Data Objects from Memory
To delete data clusters from memory, use the statement FREE MEMORY.
Deleting Data Clusters from Memory
please read this which provide more idea about memory
Message was edited by:
sunil kumar

Passing parameters from URL to multiple iViews on a page.

Hi Everyone,
Could you please point me to a guide or howto, which explains on passing parameters from URL to multiple iViews on a page. I already know how to pass parameters from URL to a single iView (wiki).
Thanks!
Indy

Hi Indy,
Currently, passing parameters to the page which contains VC iViews is not supported, only directly in the iView's URL.
Regards,
Natty

Passing parameters from one form to another

Hi,
I'm trying to pass parameters from 1 form to another. I would be able to call the form, but the parameters are not passed to the calling form. I do not know what's the problem. Basically, the 2nd form shows up with blank values in all the fields. Below is my code. Anybody expert in this, pl. help.
By the way my 1st form is based on PROCEDURE.
declare
s_requestor           number(10);
s_customer_impact      varchar2(4000);
s_creation_date      date;
l_url                varchar2(4000);
blk               varchar2(10) := 'DEFAULT';
begin
p_session.set_value(
p_block_name => blk,
p_attribute_name => 'A_P_REQUESTOR',
p_value => 88888);
s_requestor := p_session.get_value_as_number
(p_block_name => blk,
p_attribute_name => 'A_P_REQUESTOR');
s_customer_impact := p_session.get_value_as_varchar2
(p_block_name => blk,
p_attribute_name => 'A_P_CUSTOMER_IMPACT');
s_creation_date := p_session.get_value_as_date
(p_block_name => blk,
p_attribute_name => 'A_P_CREATION_DATE');
l_url:=('/pls/portal/PORTAL.wwa_app_module.link?
p_arg_names=_moduleid&p_arg_values=1794837934&
p_arg_names=_show_header&p_arg_values=YES&
p_arg_names=REQUESTOR&p_arg_values='||s_requestor||'&
p_arg_names=CREATION_DATE&p_arg_values='||s_creation_date||'&
p_arg_names=CUSTOMER_IMPACT&p_arg_values='||s_customer_impact);
PORTAL.wwa_app_module.set_target(l_url);
end;

the way to call one form from another and pass values for parameters from the procedure is like this:
PORTAL.wwa_app_module.link (
p_arg_names => PORTAL.wwv_standard_util.string_to_table2('_moduleid:_show_header:REQUESTOR:CREATION_DATE'),
p_arg_values => PORTAL.wwv_standard_util.string_to_table2('1191314879:YES:'||s_requestor||':'||s_creation_date));
and so on.
Hope it works for you

Pass data from one web application to another web application

Hi,
Please provide suggestion for following scenario:
Scenario: Basically the aim is to transfer large amount of data from one application to another and display JSP of second application.
User enteres data on a JSP of one web application. When he submits that data, another web application opens in new window and data from first application should be passed to this second web application. Another web application will display that data on its own JSP. User can perform whatever he wants on second application screen.
Possible solutions:
1) response.sendRedirect(): This makes GET request. But, there is large data to send. So, GET is not effective.
2) forward(request, response): Can't use as I have to pass data to different application that is in another context.
3) URLConnection: Here, I can make POST request and set attributes in HTTP request and make connection to another application. I can pass data using output stream. But, I can't display second application JSP to user even if I use input stream to read response. Because control will be ultimately in first application only.
Is there any othe method to achieve this or any of the above options extendable?
Please give your inputs.

Hi,
According to your post, my understanding is that you want to migrate list data from one web application to another.
We can migrate list data programmatically, there are some articles for your reference.
http://blogs.msdn.com/b/tejasr/archive/2007/11/12/code-snippet-copy-list-data-between-sites-programmatically.aspx
http://www.fivenumber.com/copy-sharepoint-list-items-from-one-site-to-another-programmatically/
http://geekswithblogs.net/AnneBougie/archive/2009/01/23/copy-a-sharepoint-list.aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Need help in passing parameters from one page to another!

Hi,
I need to pass values that are retrieved from database from one page to another.
But even when I use pageContext.putParameter(), I am not able to view the value in the 2nd page.
Any pointers on how to pass parameters would be helpful..
Thanks in advance!

The requirement is on the main page there are 6 fields out of which 4 are read-only and are taken from the database and 1 is taken from database, but can be edited, and the 6th one is completly editable for the user. I am trying to pass these parameters using setForwardURL, and on the second page (Preview page, where all these fields are read-only), I am able to retrieve these parameters using pageContext.getParameters() and am able to display it as an exception but I am not able to set these into the fields using pageContext.putParameters().

ADF: Passing parameters from one page to another using setPropertyListener

Hi,
I'm trying to find a simple way to pass a parameter from one page to another.
On the first page I have a table, the second page is a history page, showing the change history of rows from the table on the first page.
In the table on the first page there's a unique column (an order number), the value of which is never changed for a given row.
What I would like is to be able to pass the order number from the currently selected row of the first page on to the history page, making the history page show only the history for the given order number.
Using the task-flow for the history page, I've defined an input parameter (an order number), defined a criteria and so on. I've tested the functionality of this in the Application Module, and it seems to work.
My problem is passing the order number from the first page to the second.
I've created a Managed Bean, with a variable for the current order number, including accessors. On the table on the first page, I've created a contextMenu, and added an Item called "Show history" with an action that navigated from the first to the second page (a control flow I've defined in adfc-config). I've included a setPropertyListener in the "Show history" item. I've set the "From" property of the setPropertyListener to "#{row.ordernumber.attributeValue}" and the "To" property to point at the order variable in the Managed Bean. Finally, I created a new page for the history, dragged the history task flow onto this page as a region, using the Managed Bean order variable as input parameter.
The result is this: When I bring up the context menu from a row in the table on the first page and select "Show history", I get this error: "The class 'java.lang.String' does not have the property 'attributeValue'."
That's a bit puzzling to me, seeing as I used the Expression Builder to fill out the "From" property. I've tried using "inputValue" instead of "attributeValue", but that simply changes the error message to: "The class 'java.lang.String' does not have the property 'inputValue'."
What am I doing wrong?
Regards,
Andreas

Hi Timo and Puthanampatti,
I actually tried something similar to what you have suggested before starting this thread, but still got an error. What I hadn't spent a lot of time investigating initially was that it gave a DIFFERENT error. But after reading Timo's suggestion, I went back to this other error and found out that it was connected to my Managed Bean. For some reason, I had made the mistake of giving the bean the same name (in adfc-config) as the actual java class. And this leads to a circular reference error (that I would only get to see when I didn't get the java.lang.String error first).
Having fixed this, I can successfully pass my parameter from one page to another (with the "From" property of the setPropertyListener set to "#{row.ordernumber}").
Thanks for your time,
Andreas

Passing parameters from one channel to another

Hi,
I was wondering if it is possible to pass parameters or values from one channel to another, for ex. through JSP, etc.
Thanks, Pablo

try these topics
http://swforum.sun.com/jive/thread.jspa?forumID=80&threadID=19222
http://swforum.sun.com/jive/thread.jspa?forumID=80&threadID=23051
and maybe
http://swforum.sun.com/jive/thread.jspa?forumID=80&threadID=19222
I use javaBeans or SSOToken to exchange parameters between portlets.

ADF UIX Passing values from one Data Control to another

How to transfer value of any column in the selected row of the table (one data control) to the messageTextInput, based on another Data Control?
It may be on a single UIX-page or on different pages.
Thank you.

HI Prithviraj,
The problem screen shot is as follows:
The First Applicant is coming from one sub report and the second applicant is coming from another sub report. It is working fine from Crystal reports. But in the Crystal report viewer i am unable to get the out come as 1,2,3.
If you need any additional information please let me know.
Thanks
Penchal

Passing parameters from one OAF page to another OAF PAge

Similar Messages

Maybe you are looking for