Passing variables from Report to Form
Hi, I need pass a couple of variables from the REPORT to two fields in the FORM for save in a table. Somebody knows how do I do this?. Any suggestions?
Thanks a lot!
I think that this situation is different that pass variables from FORM to REPORT.
You need to use a Link component to your Form that you then attach to one of the data columns in the Report. When you edit the link in the report, you can specify the fields to pass.
Similar Messages
-
How can I pass parameter from report to form?
Hi :)
Now I try to build conference room like this by using form
and report. And i design that when users click at group report
then i'll show page that contain questions report and add
question form. And question form and report must receive the
same parameter from group report.
First Problem: is I don't know how group report send the
same parameter to question report and add question report at the
same time. And is it possible??? If not please suggest me what
should I do???
Second Problem: is I don't know how can I pass parameter from
report to form. I don't know the way to do it.
Please tell me!!! Please...
I look forward to hearing from all of you.
Thank You.One way is to create a link based on that form and attach that
link with the report. Through links you can pass parameters -
Passing parameters from REPORTS to FORMS.
Hi,
Could anyone help my on this, I'm trying to pass parameters from reports to forms is it possible? could anyone give me an idea how do I have to proceed.
thank youk,
binohttp://technet.oracle.com:89/ubb/Forum4/HTML/009647.html
-
Hw to pass parameter from report to forms
Dear Friends,
I m working on Forms n Reports 6i,
I m running report n passing parameter from the forms now the requirement is that if report run successfully it shuld give the msg otherwise give an user define error msg.
Hw do i pass any parameter from report to form for acknowledgment.
Thanking yours
ChandanHi Rajat,
using run_product built in i can pass parameter from forms to reports but hw can i get some parameter value from reports to forms as mentioned earlier my post
Thanking Yours,
Chandan -
How to pass value from report to form?
Dear,
I built a report and I create button on report too. This
button will show a form that I want it to automatically show
receivable values from report so that user don't complete them.
So I create a button on the report . I enter Javascript in
PL/SQL Code tab in '...after displaying the footer' as follow :
htp.formOpen
(owa_util.get_owa_service_path||'portal30.wwa_app_module.link?
p_arg_names=_moduleid&p_arg_values=1736929105&p_arg_names=_show_h
eader&p_arg_values=YES&p_arg_names=GNO&p_arg_values=1&p_arg_names
=QNO&p_arg_values=2');
htp.formSubmit(null,'New Answer');
htp.formClose;
GNO , QNO is value which I want to pass
As you can see, the above code can pass only static value.
But I want to pass values that is the condition of this report.
I mean,such as, this report show data that gno=1 and qno=2 and I
want to pass these values to form. So both value will appear in
gno and qno field.
So please tell me what should I do. Please help me. I don't
know how to do it. I look forward to hearing from all of you.
Please!!!!!! Don't hesitate to answer.
Thank you very much
Sirin KittichotpanichHi Marc,
Yes, you have it correct in what I am trying to do and if I put a default value in the hidden item on page 2 and run it then that works fine. I just can't get the value from the form passed to page 2 for some reason. There are actually 22 items on the form that can be filtered but just using COREID for simplicity. When I run the form I am just entering a value in the COREID field to try and return those records. Most of the other items on the form are displayed as Popup LOV(fetches first row). Would the values of all these be done the same in a comma delimited list for the items and values? I was trying to get at least one of them working first. Here is the search result that comes up in the debug window:
Search Results
0.01: Item: P2_COREID HIDDEN
0.01: show report
0.02: determine column headings
0.02: parse query as: MOTEAMSAPEX
0.02: binding: ":P2_COREID"="P2_COREID" value=""
0.02: print column headings
0.02: rows loop: 15 row(s)
No data found.
Here is the SQL statement:
select coreid, serialnumber
from MOTEAMS.V_ASSETS where
instr(UPPER("COREID"), UPPER(:P2_COREID)) > 0
The branch settings are:
Set these items: P2_COREID
With these values: &P1_COREID (also tried this with period at the end)
I am new to this and not familiar with apex.oracle.com. How would I go about posting to that site?
Thanks,
Pam -
Passing parameter from reports to form - Urgent
Hi ,
I am calling a report (2.5) from a form using RUN_PRODUCT. I would like to know if there is any way to do the following.
(a) Return a value from reports to calling form. For ex. I would like to know the last Item name (assuming the reports prints all items in inventory) printed. I am sending a from and to numbers of item id's (range) and I need to know the last item printed.
(b). Check the success of report. For example, while printing the 5 items (the range that I passed) if there is any error in printing , this should be tracked either in the form or report. If this is not possible using run_product , If I need to use srw package, how to use it. Can I call the report as usual with run_product and in the after parameter trigger can, I call the report again and track error.
Any help will be appreciated.
ThanksYou have to explain what you want.
Why would you want to start the Forms Builder (Design time tool) from a JSP page? It's about the same as starting JDeveloper or Eclipse from a JSP page. -
Passing parameters from report to form portlet
I am trying to link data in a report to a form. Here's the gist: I click on a record in the report and the data is passed to a form in update mode. The problem is that when I click on the record the data is not passed right away to the form. Only after clicking the record again or refreshing the page does the data get passed. Any ideas? I'm sure it's something very simple that I'm missing. Here's the code below:
report code:
select 'http://jvic9/pls/portal30/portal30.empcust.set_context_refresh?p_context=EMPNO&p_context_value='||empno||'&p_page=reportform">'||empno||'' empno_link, empno, ename, job, mgr, hiredate, sal, comm, deptno
from scott.emp
set_context_refresh procedure:
procedure set_context_refresh
p_context in varchar2,
p_context_value in varchar2,
p_page in varchar2)
is
v_Session portal30.wwsto_api_session;
begin
v_Session := portal30.wwsto_api_session.load_session('CONTEXT','SESS_EMP');
v_Session.set_attribute(p_context, p_context_value);
v_Session.save_session;
owa_util.redirect_url('http://jvic9/pls/portal30/url/page/'||p_page); end set_context_refresh;
form code:
/* ... before displaying the page section */
portal30.empcust.autoquery_emp_form(p_session);
autoquery_emp_form procedure:
procedure autoquery_emp_form
p_session in out portal30.wwa_api_module_session
is
v_RowID varchar2(100);
v_Session portal30.wwsto_api_session;
v_empno varchar2(40);
begin
v_Session := portal30.wwsto_api_session.load_session('CONTEXT','SESS_EMP');
v_empno := v_Session.get_attribute_as_varchar2('EMPNO');
begin
select rowidtochar(rowid) into v_rowid
from scott.emp
where empno = v_empno;
end;
p_session.set_value(p_block_name=>'DEFAULT',p_attribute_name=>'_CALLED_FROM_LINK',p_value=>'ROWID');
p_session.set_value(p_block_name=>'DEFAULT',p_attribute_name=>'_ROWID',p_value=>v_rowid);
portal30.wwa_api_module_event.do_event('DEFAULT','QUERY_BOTTOM',1,'ON_CLICK',True,'',p_session);
p_session.save_session;
end autoquery_emp_form;Your code seems to be OK.
The problem of the data not appearing when you do the query manually (i.e through an API call), is a bug and has been fixed in patch 3.0.9.8.3. -
Passing parameters from report to form
Hello,
I have a report based on a View with all the details of only one record. I whant to link this report with a form in insert mode, passing some of the fields as parameters.
Anyone konws how to do it?Jan,
Thanks for the succinct reply! I've been trying to 2 days to solve this problem. Whew!
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Jan Willem Vermeer ([email protected]):
Unfortunately linking reports and forms in insert mode is not completely tackled in the faq.
For a long time Oracle Customer Support and I were not able to get the form in insert-mode. My forms kept on appearing in query-mode, so when I passed values from the report to the form, the form queried records based on the parameters passed through from the report. While I wanted these parameters filled in as default values.
The solution is almost too easy to imagine. When you define the link-parameters in the report definition, you should leave the EQUAL-sign blank. On metalink you can read TAR 1258704.996 and bug 1696340 for more info.<HR></BLOCKQUOTE>
null -
Passing Parameter from report to form
I have a report, link, and form developed. They all work just fine execpt that when the form comes up it is not linked to he record that it was called from. I have read the links on passing parameters and still do not understand what I have to do.
Here is the basic scenario. I have a report that is a list of account codes for a project. There is a link from the account code to the acount code form where the user can change the status (active/inactive) of the account for a project. If the user clicks on the link for account 1000 thenI would expect that the form opens with account 1000 in update mode.
How do I do it. It seems a very simple concept. What am I missing?
Jerry
[email protected]I am obviously missing something. In editing the link, I have a user parameter of atab. This is the column that is linked in the report. What do I use as the default value. Does it make a difference if the table does or does not have an index on the atab? The PK is an ID.
Please help
Jerry -
Passing key from report to form
HI, I am new to HTMLDB and have created an application which has a report based on a master table with a clickable key(user_id) which then takes you to the detail based form. If the record for the form exists then it works just fine but I have a problem when trying to create a new record on the form and that is "How do I pass the key(user_id) from the report to the form after getting a 1403 error??"
BryanI'm not sure how a detail table can have a userid for a PK. Is it guaranteed to have at most one record for the Master table?
Can you put the url associated with a detail page into this thread?
I suppose you could put a process on the page that checks to see if the record exists, and if not clears all the values of the page. That might solve the problem? Does the create button take you to the same detail page?
Anton -
Passing parameter from report to form on the sam page
i would like to make a portal page with 2 portlets. on the left side a report displaying for example all names and empno4s from the emp table and on the rigth side a form portlet that displays the details of one employee and allows to update the details.
clausI am obviously missing something. In editing the link, I have a user parameter of atab. This is the column that is linked in the report. What do I use as the default value. Does it make a difference if the table does or does not have an index on the atab? The PK is an ID.
Please help
Jerry -
Passing variable from a APEX form to PL/SQL Open link in a new borwserwin
Hello Everyone,
I got a apex form based on a query like :
"INTERFACE_NAME",
"INTERFACE_NAME" INTERFACE_NAME_DISPLAY,
"PRIORITY",
"HAS_STARTED",
"EMAIL_TO",
"STATE",
from "#OWNER#"."INTERFACES"
where "INTERFACE_NAME" = :P2_INTERFACE
only the field state is updateble.
It's just allowd to update the data in the DB-table with a PL/SQL Procedure:
begin
set_interface_vals@DB (p_interface_name => :INTERFACE_NAME, p_state => :STATE);
end;
I did put the prodzedure in a Page Process which act with a submit button.
Now to my problem: how do I get the values of my fields INTERFACE_NAME and STATE. the way I done it here does not work.
Thanks for you help.
regards sia
Edited by: sia on Mar 14, 2011 5:46 PMwell then , you should be looping over the record invoking that package for each row. Your package handles only one row, isn't it ?
The first thing your should do is find the names of the column fields interface name and state. Open the page source or check it in firebug by looking inside the appropriate columns. The html code will be something like <input type="text" name="f01" value="" />
<input type="text" name="f01" value="" /> with the name attributes in the format fXX (01 to 50)
I am assuming that the interface name has it as f01 (XX=01) and state is f02 (XX=2), each of which corresponds to an application array(having as many elements as there on the page) by the name "APEX_APPLICATION.G_FXX"
BEGIN
FOR i IN 1..APEX_APPLICATION.G_F01
LOOP
set_interface_vals@DB ( p_interface_name => APEX_APPLICATION.G_F01(i) --ith row's interface column value
,p_state => APEX_APPLICATION.G_F02(i) --ith row's state column value
END LOOP;
END; -
Passing variable from one JSP to another
Hi....
I am working on customizing Oracle Application(istore).
I need to pass variable from 1 JSP to another.
JSP 1 contains the following line of code:
<INPUT type="HIDDEN" name="soldtoCustPartyName" value="<%=soldtoCustPartyName%>">
How can I pass this to another JSP Page. The other JSP should take the 'soldtoCustPartyName' and find out the primary address country.
So please help me in getting variable passed from 1st JSP to next.
By default, 1st JSP is not fwded to 2nd JSP.
This is very very urgent...Please help.....When you push the submit button on jsp1 - it goes to jsp2?
ie
// in jsp1.jsp
<form action="jsp2.jsp">
<INPUT type="HIDDEN" name="soldtoCustPartyName" value="<%=soldtoCustPartyName%>">
<input type="submit">
</form>
//Then in jsp2.jsp all you need is
request.getParameter("soldtoCustPartyName");This will pick up the value that is coming from the hidden field on jsp1 -
Passing variables from Applescript to bash
Hello,
I'm trying to pass variables from Applescript to bash using the following code
#!/bin/bash
osascript <<EOF
tell application "SystemUIServer"
set username to text returned of (display dialog "Enter your name" with icon caution default answer "" buttons{"Continue"})
set macname to text returned of (display dialog "Enter name of your Mac" with icon caution default answer "" buttons{"Continue"})
do shell script "export USERNAME=" & quoted form of username & " && export MACNAME=" & quoted form of macname
end tell
EOF
echo "USERNAME is $USERNAME, MACNAME is $MACNAME"
but no luck
Mac-mini:Downloads admin$./new.command
USERNAME is , MACNAME is
Any help would be greatly appreciated.I just realized you are returning 2 variables. That can still be handled by echoing/printing the values, you just have to parse the output, or use other tricks.
VALUES=( $(osascript -e '...') )
This would make VALUES an array, with each array element containing one space separate return value from osascript
USERNAME=${VALUES[0]}
MACNAME=${VALUES[1]}
If USERNAME or MACNAME could have spaces in them, you would need to use some kind of separator character. For example if you use @ as the separator you could do something like:
VALUES=$(osascript -e '...')
USERNAME=${VALUES%@*}
MACNAME=${VALUES#*@}
which will %@* will delete everything starting with the @ til the end of the string, and #*@ will delete everything from the beginning of the upto and including the @.
Another trick is to have the return values be properly formed shell variable assignments such as
print "USERNAME='your user name' MACNAME='Your Mac Name' " -- I'm making this up as I do not really know Applescript, so you will have to figure out how to get Applescript to print something that looks like
USERNAME='your user name' MACNAME='Your Mac Name'
In your shell script you have code that looks like:
VALUES=$(osascript -e '...')
eval $VALUES
The eval will execute whatever is stored in $VALUES, and if that happens to look exactly like shell variable assignments, you get the variables created in the current shell context, where can use them. -
Passing variables from JSP to workflow
I want to pass some variables from my JSP forms to a workflow. The workflow is triggered when I call processLaunch.jsp with the name of the workflow. I couldn't figure out a way to have the input fields in my JSP form passed to the workflow.
If anyone can provide me with some answer, I'd greatly appreciate it.<Property name='postURL'>
<block>
<concat>
<s>user/processLaunch.jsp?id=</s>
<ref>ConstantData.REGISTERED_PROCESSES.WF_COMMON_ITARUPDATE</ref>
</concat>
</block>
</Property>
I have this code on the form...how should I pass a op_enduserId from here to my workflow. Can I pass it by query string &op_enduserId=enduserId
Maybe you are looking for
-
Report for vendor Purchase order
Hi my Client requirement is when they enter PO.no,or by any means, they must get the report of Open Quantity, posted GR quantity, finally invoiced quantity of PO. Do we have any Std, in SAP ??? regards imran
-
Failure of Contact manager on updating of lenovo A6000
After updating my Lenovo A6000 to Craft-A6000-m_S021_150616, Am receiving text messages on failure of the contact manager. Please Advice
-
HT5380 IOS 7 after update safari toolbar is in Chinese
How do you change the language on the safari toolbar it's all in Chinese , I'm in the uk and would l Like the toolbar to be English I can't read other languages I'm using ipad 3
-
Normally, at least in most Windows programs, and I think other OSes too, items that can be used are black, and items in gray are inactive so that they are not available. It's disconcerting to see the menu in gray, even though they work.
-
I am running an old workhorse iMac G4 running OS 10.4.11. Will a MacMini reviver her to upgrade to lion or at least Leopard so I can get my mac mail and iTunes 10.4.1? Thank you.