Password of ddic in ecc 6.0 ides

hi,
Password of ddic in ecc 6.0 ides
Thanks in sdvance.

hi
good
go through this link
http://docs.freebsd.org/doc/4.5-RELEASE/usr/share/doc/handbook/sapr3.html
thanks
mrutyun^

Similar Messages

  • SAPUSER is locked in ECC 6.0 IDES SYSTEM

    Hi Everyone,
    I installed ECC 6.0 IDES SYSTEM, but the username SAPUSER is locked, I tried with various passwords but was not successfull. Is there any other way I can logon into it with this username or any other super username. Please help.
    thanks,
    Prashant.

    Hi techno guys,
    I have deleted the usr02 from sql table, and managed to logged in by Sap* and Password pass,
    But when I try to do something I am getting a sql error message that I do not have access or something like that,
    From SU01 also I couldnt create a username or unlock because same error page is coming..
    plz tell me do i need to do something after deleting that usr02 row from the table?
    plz advice me .. thanks

  • ECC 6.0 IDES Dump

    Hi All,
    I am facing some problem in my ECC 6.0 IDES..
    I Am getting frequent Dumps when I check ST22..
    It says "DDIC_TYPE_INCONSISTENCY"...
    The error is as below....
    Short text
        Inkonsistenz im Dictionary für die Struktur "MCVBAPB".
    What happened?
        The current ABAP/4 program had to be terminated because the
        ABAP/4 processor detected an internal system error.
    What can you do?
        Please make a note of the actions and input which caused the error.
        To resolve the problem, contact your
        SAP system administrator.
        Select the "Print" function to obtain a hardcopy of the
        current termination message.
    Error analysis
        There is an internal system error.
        eliminated with ABAP/4.
    How to correct the error
        It is probably not possible to eliminate the system error
        with ABAP/4 alone.
        You may able to find an interim solution to the problem
        in the SAP note system. If you have access to the note system yourself,
        please use the following search criteria:
        "SAPLMCEX" "DDIC_TYPE_INCONSISTENCY"
        You may able to find an interim solution to the problem
        in the SAP note system. If you have access to the note system yourself,
        please use the following search criteria:
        "SAPLMCEX" "DDIC_TYPE_INCONSISTENCY"
        If you cannot solve the problem yourself, please send the
        following documents to SAP:
    Information on where terminated
        The termination occurred during generation of the ABAP/4 program "SAPLMCEX".
        The termination occurred in line 23
        of the source code of program "LMCEX$17" (when calling the editor 230).
    Source Code Extract
    Line  SourceCde
        1 *******************************************************************
        2 *   THIS FILE IS GENERATED BY THE FUNCTION LIBRARY.               *
        3 *   NEVER CHANGE IT MANUALLY, PLEASE!                             *
        4 *******************************************************************
        5 FUNCTION $$UNIT$$ MCEX_FILL_XS_11
        6
        7     IMPORTING
        8        REFERENCE(SUHIE) TYPE !TFCS-SUHIE
        9        REFERENCE(XMCKOMV) TYPE !MCKOMVB OPTIONAL
       10        REFERENCE(XMCVBAK) TYPE !MCVBAKB OPTIONAL
       11        REFERENCE(XMCVBAP) TYPE !MCVBAPB OPTIONAL
       12        REFERENCE(XMCVBAPF) TYPE !MCVBAFB OPTIONAL
       13        REFERENCE(XMCVBEP) TYPE !MCVBEPB OPTIONAL
       14        REFERENCE(XMCVBFA) TYPE !MCVBFAB OPTIONAL
       15        REFERENCE(XMCVBKD) TYPE !MCVBKDB OPTIONAL
       16        REFERENCE(XMCVBPA) TYPE !MCVBPAB OPTIONAL
       17        REFERENCE(XMCVBUK) TYPE !MCVBUKB OPTIONAL
       18        REFERENCE(XMCVBUP) TYPE !MCVBUPB OPTIONAL
       19        REFERENCE(XMCFPLT) TYPE !MCFPLTB OPTIONAL
       20        REFERENCE(INTERFACE_VERSION_11) TYPE !I
       21            DEFAULT CON_MC11_FROM_2000_1
       22     EXPORTING
    >>>>>        REFERENCE(XS_ACTIVE) TYPE !MCCONTROL-LOGGING .
    Internal notes
        The termination was triggered in function "ab_RxDdicTypeError"
        of the SAP kernel, in line 1053 of the module
         "//bas/700_REL/src/krn/runt/abucutil.c#2".
    The internal operation just processed is " ".
    Internal mode was started at 20080704015252.
    Es liegt eine Inkonsistenz für die DDIC-Struktur "MCVBAPB" vor, d.h.
    das zugehörige Dictionary-Laufzeitobjekt (NAMETAB) ist fehlerhaft.
    Die Anzahl der Komponenten der Struktur (NAMETAB-Komponente "fldcnt")
    ist mit 355 angegeben. Wenn man alle Unterstrukturen auflöst und die
    tatsächliche Gesamtanzahl aller Komponenten rekursiv berechnet, kommt
    man allerdings auf einen anderen Wert.
    Der Fehler wird dadurch verursacht, daß die Struktur "MCVBAPB" oder eine ihrer
    Unterstrukturen verändert wurde und bei der anschließenden Aktivierung
    ein Fehler auftrat. Bitte prüfen Sie das Laufzeitobjekt der Struktur "MCVBAPB"
    im Dictionary, um die genaue Fehlerursache zu analysieren.
    Falls in Ihrem System der Programm RSDDCHECK bereits vorhanden ist,
    können Sie die Struktur "MCVBAPB" auch mit Hilfe dieses Programms überprüfen.
    ive Calls in SAP Kernel
    es of C Stack in Kernel (Structure Differs on Each Platform)
    (R) - R/3(TM) Callstack, Version 1.0
    yright (C) SAP AG. All rights reserved.
    lstack without Exception:
           : disp+work.EXE (pid=3000)
    n      : 7/4/2008 1:52:53.468
    eads   : 2
    puter Name       : UCLIDES
    r Name           : SAPServiceUCI
    ber of Processors: 2
    cessor Type: x86 Family 15 Model 4 Stepping 7
    dows Version     : 5.2 Current Build: 3790
    te Dump for Thread Id cb4
    =00000016 ebx=0000041c ecx=064c4008 edx=00000000 esi=0000041c edi=00000000
    =7ffe0304 esp=0558c8d0 ebp=0558c940 iopl=0         nv up ei pl zr na po nc
    001b  ss=0023  ds=0023  es=0023  fs=003b  gs=0000             efl=00200246
    ction :
         7ffe02eb 0000             add     ,al                     ds:00000016=??
         7ffe02ed 0000             add     ,al                     ds:00000016=??
         7ffe02ef 0000             add     ,al                     ds:00000016=??
         7ffe02f1 0000             add     ,al                     ds:00000016=??
         7ffe02f3 0000             add     ,al                     ds:00000016=??
            7ffe02f5 0000             add     ,al                     ds:00000016=??
            7ffe02f7 0000             add     ,al                     ds:00000016=??
            7ffe02f9 0000             add     ,al                     ds:00000016=??
            7ffe02fb 0000             add     ,al                     ds:00000016=??
            7ffe02fd 0000             add     ,al                     ds:00000016=??
            7ffe02ff 008bd40f34c3     add     ,cl          ds:c33413f0=00
            7ffe0305 9c               pushfd
            7ffe0306 810c2400010000   or      dword ptr ,0x100  ss:0558c8d0=77f43741
            7ffe030d 9d               popfd
            7ffe030e c3               ret
            7ffe030f 90               nop
            7ffe0310 90               nop
            7ffe0311 90               nop
            7ffe0312 90               nop
            7ffe0313 90               nop
            7ffe0314 90               nop
            7ffe0315 90               nop
    FramePtr ReturnAd Param#1  Param#2  Param#3  Param#4  Function Name
    0558c8cc 77f43741 77e41817 0000041c 00000000 0558c914
    0558c940 77e4168f 0000041c 0001d4c0 00000000 01034bf9 ntdll!NtWaitForSingleObject
    0558c974 0056da03 0056da3c 7c38b5e8 7c38b5e8 7c38b5e8 kernel32!WaitForSingleObject
    0558c978 0056da3c 7c38b5e8 7c38b5e8 7c38b5e8 01dd88c0 disp+work!NTStack
    0558c994 0056da70 7c38b5e8 00000000 0086bbf4 7c38b5e8 disp+work!CTrcStack2
    0558c9a0 0086bbf4 7c38b5e8 00000000 005f0059 00300030 disp+work!CTrcStack
    0558c9c4 0086f036 0000015a 2236bd48 2237fff4 0558ca58 disp+work!rabax_CStackSave [abrabax.c (7020)
    0558d26c 0081352c 01479ae0 01479ab0 0000041d 1f95a010 disp+work!ab_rabax
    0558d284 00a392a8 22370256 00000163 0558d300 00000000 disp+work!ab_RxDdicTypeError [abucutil.c (10
    0558d2b0 00a39390 220b2908 220b2908 220b2908 00000000 disp+work!FirstLevelChildCnt [scsypar.c (342
    0558d32c 00a398ea 0558d364 220b2908 055907b8 0559077c disp+work!UcTypeToTree
    055907c0 00a399b2 055907dc 220b2908 00000000 22370256 disp+work!UcTypeToFragView [scsypar.c (3845)
    05590808 00a32d20 220b2908 220b2908 21f0bb98 00a037d6 disp+work!sc_tparUcFragView [scsypar.c (3897
    05590818 00a037d6 220b2908 220b2908 220c3034 220b2908 disp+work!sc_loadflds
    055908bc 00a041eb 220b2908 220076f8 00000000 0559090c disp+work!GenerateType
    055908d0 00a07b37 220b2908 00000000 00000002 222ade94 disp+work!cg_TypeGenInfo
    0559090c 00a0a098 222ade94 222ade94 05590b5f 05590b44 disp+work!datcr_funcpar
    05590b60 00a4b3ea 222ade94 00000000 220e6004 220e6004 disp+work!cg_datcr
    05590b88 00a4a943 222ade94 00000000 00000002 00000000 disp+work!sc_datcr_set
    05590bec 00a5315e 220e6004 00000002 21754b40 220b2908 disp+work!sc_FuncParAdd
    05590c28 00a2fdd2 21754b40 00000002 00000009 00009b35 disp+work!sc_cdatcr
    05597e88 00b7a44f 00200020 00200020 00000002 00000002 disp+work!rs_oper_abap3088 [rsabap44.c (3459
    0559e90c 009eeabc 000000af 02ac1b3c 02ab1350 02ab130c disp+work!rs_expan_abap
    0559e920 00a23c61 000000af 0559ea3c 2217e0f0 00000000 disp+work!sc_expan
    0559ea14 00a232ce 00000000 0559ea3c 0559eae0 00000000 disp+work!parse
    0559ea54 00a1fb5d 221700ec 00000000 00000000 00000000 disp+work!sc_check
    0559eabc 00a23340 00000000 00000000 00000005 2177e100 disp+work!ProcessText
    0559eaf8 00a788d1 00000076 00000000 00000001 00000001 disp+work!sc_check
    0559f148 00b48465 00000000 00000000 00000000 00000000 disp+work!sc_inclu
    055a5bcc 009eeabc 00000076 02ac1b3c 02ab1350 02ab130c disp+work!rs_expan_abap
    055a5be0 00a23c61 00000076 055a5cfc 2177e0f0 00000000 disp+work!sc_expan
    055a5cd4 00a232ce 00000000 055a5cfc 00000000 00000005 disp+work!parse
    055a5d14 00a788d1 00000076 00000000 00000001 00000001 disp+work!sc_check
    055a6364 00b48465 00200020 00200020 00200020 00200020 disp+work!sc_inclu
    055acde8 009eeabc 00000076 02ac1b3c 02ab1350 02ab130c disp+work!rs_expan_abap
    055acdfc 00a23c61 00000076 055acf18 217700ec 00000000 disp+work!sc_expan
    055acef0 00a232ce 00000000 055acf18 00000000 00000000 disp+work!parse
    055acf30 00a246fd 02acfdf8 055ad548 055ad4dc 009e9cd8 disp+work!sc_check
    055acf40 009e9cd8 00000000 00000000 00000000 0647520c disp+work!sc_checkStart
    055ad4dc 007f9c32 055ad548 00000001 00000000 00000000 disp+work!cg_generate
    055ad524 007f9daf 055ad548 00000000 00000000 055afcac disp+work!ab_gabap
    055afcb8 0054a4c1 07f1a654 00012762 07f1a654 00007528 disp+work!ab_genprog_remote
    055afcf0 00499ff6 07f1a648 0000276e 00000301 00000003 disp+work!ThrtRpcExec
    055afee0 0049b6e7 00000001 00000000 00000000 00430000 disp+work!TskhLoop
    055aff00 0042171c 00000000 00000000 7ffdf000 055aff60 disp+work!ThStart
    055aff14 00401080 00000003 05716768 00000001 00000000 disp+work!DpMain
    055aff60 011d9ae0 00000003 05716768 05717338 01c37000 disp+work!nlsui_main
    055affc0 77e4f38c 00000000 00000000 7ffdf000 00000000 disp+work!wmainCRTStartup
    055afff0 00000000 011d999d 00000000 00905a4d 00000003 kernel32!TerminateThread
    State Dump for Thread Id fa4
    eax=00000012 ebx=00000103 ecx=0761ff00 edx=00000000 esi=00000000 edi=00000000
    eip=7ffe0304 esp=0761fec0 ebp=0761ff04 iopl=0         nv up ei pl zr na po nc
    cs=001b  ss=0023  ds=0023  es=0023  fs=003b  gs=0000             efl=00000246
    function :
            7ffe02eb 0000             add     ,al                     ds:00000012=??
            7ffe02ed 0000             add     ,al                     ds:00000012=??
            7ffe02ef 0000             add     ,al                     ds:00000012=??
            7ffe02f1 0000             add     ,al                     ds:00000012=??
            7ffe02f3 0000             add     ,al                     ds:00000012=??
            7ffe02f5 0000             add     ,al                     ds:00000012=??
            7ffe02f7 0000             add     ,al                     ds:00000012=??
            7ffe02f9 0000             add     ,al                     ds:00000012=??
            7ffe02fb 0000             add     ,al                     ds:00000012=??
            7ffe02fd 0000             add     ,al                     ds:00000012=??
            7ffe02ff 008bd40f34c3     add     ,cl          ds:c33410d7=00
            7ffe0305 9c               pushfd
            7ffe0306 810c2400010000   or      dword ptr ,0x100  ss:0761fec0=77f42845
            7ffe030d 9d               popfd
            7ffe030e c3               ret
            7ffe030f 90               nop
            7ffe0310 90               nop
            7ffe0311 90               nop
                    7ffe0311 90               nop
            7ffe0312 90               nop
            7ffe0313 90               nop
            7ffe0314 90               nop
            7ffe0315 90               nop
    FramePtr ReturnAd Param#1  Param#2  Param#3  Param#4  Function Name
    0761febc 77f42845 77e60226 000006ec 00000000 00000000
    0761ff04 01127ee6 000006ec 00000000 00000000 05a731b8 ntdll!NtFsControlFile
    0761ff84 7c349565 00000000 00000000 00000000 05a73250 disp+work!SigIMsgFunc
    0761ffb8 77e4a990 05a73250 00000000 00000000 05a73250 MSVCR71!endthreadex
    0761ffec 00000000 7c3494f6 05a73250 00000000 00000000 kernel32!FlsSetValue
    Can any of you, suggest solution....

    Hi
    There is a problem with the version management of the objects transported. This might be the possibility after seeing the log.
    Regards
    Bhaskar
    Edited by: bhaskar1818 on Jul 4, 2008 2:53 PM

  • ECC 6.0 IDES configuration of source system in BI 7.0

    Recently I have installed the ECC 6.0 IDES version on my desktop it has both mySAP and BI on the same system. I tried to create new source system under SAP folder using RSA1 got the following message.
    "No entry for BW_USER in table RSADMIN available"
    ANY SUGGESTIONS/IDEAS ARE WELCOME
    Thanks
    Kannan

    Hi Kannan,
    To connect both systems you need a background user (like ALEREMOTE) in both systems.
    In the source system creation, if you haven't created the RFC connection between BW and ECC you shouldn't select one (chek if DM0 is your ECC system), you should use the three fields below (app server, system ID and system number). Then enter both users and passwords (source system and local system).
    In some moment you'll be prompted to log on to ECC, there you should use a DIALOG user, for example, your user. This user should have administrator rights (if you have SAP_ALL it's ok). ECC system should be open for modifications to be able to create the system.
    If you still have problems with the users, just include SAP_ALL to both background users and should work.
    Hope this clarifies.
    Regards,
    Diego

  • ECC 5.0 IDES installtion problem, SAPSYSTEMNAME neither in profile nor ..

    Hi,
    I am installing ECC 5.0 IDES in Redhat 5 with oracle 10.2.0.4 in i386 system. I am facing problem in Database Load phase. System is waiting long and not showing any progess. In command line, I am getting some lines but not ERROR
    sapparam(1c):No profile used.
    sapparam: SAPSYSTEMNAME neither in profile nor in commandline
    Real group id set to 502.
    sapparam: sapargv(argc,argv) has not been called.
    502====group sapsys
    I exported SAPSYSTEMNAME=IDS in root (installation account) and SAPSYSTEMNAME is present in both profiles (default, Instance) but still it is not processing and hangs at the same point.
    Any help would be appreciated.
    Regards,
    Raju

    Hi..
    R3trans -d was showing error for environment variable DIR_LIBRARY and dbms_type I set these and executed with idsadm. it shows following problem in trans log ( oracle listner and oracle DB mounted manually with oraids).
    Trans.log form idsadm
    4 ETW000 R3trans version 6.09 (release 640 - 26.10.04 - 15:45:42).
    4 ETW000
    4 ETW000 date&time   : 28.08.2011 - 11:01:00
    4 ETW000 control file: <no ctrlfile>
    4 ETW000 R3trans was called as follows: R3trans -d
    4 ETW000  trace at level 2 opened for a given file pointer
    4 ETW000  [dev trc     ,00000]  Sun Aug 28 11:01:00 2011                             103  0.000103
    4 ETW000  [dev trc     ,00000]  db_con_init called                                    22  0.000125
    4 ETW000  [dev trc     ,00000]  create_con (con_name=R/3)                             57  0.000182
    4 ETW000  [dev trc     ,00000]  Loading DB library '/usr/sap/IDS/SYS/exe/run/dboraslib.so' ...
    4 ETW000                                                                              35  0.000217
    4 ETW000  [dev trc     ,00000]  Sun Aug 28 11:02:23 2011                         83113211  83.113428
    4 ETW000  [dev trc     ,00000]  load shared library (/usr/sap/IDS/SYS/exe/run/dboraslib.so), hdl 0
    4 ETW000                                                                              49  83.113477
    4 ETW000  [dev trc     ,00000]  Library '/usr/sap/IDS/SYS/exe/run/dboraslib.so' loaded
    4 ETW000                                                                              26  83.113503
    4 ETW000  [dev trc     ,00000]  function DbSlExpFuns loaded from library /usr/sap/IDS/SYS/exe/run/dboraslib.so
    4 ETW000                                                                              40  83.113543
    4 ETW000  [dev trc     ,00000]  Version of '/usr/sap/IDS/SYS/exe/run/dboraslib.so' is "640.00", patchlevel (0.32)
    4 ETW000                                                                              71  83.113614
    4 ETW000  [dev trc     ,00000]  function dsql_db_init loaded from library /usr/sap/IDS/SYS/exe/run/dboraslib.so
    4 ETW000                                                                              34  83.113648
    4 ETW000  [dev trc     ,00000]  function dbdd_exp_funs loaded from library /usr/sap/IDS/SYS/exe/run/dboraslib.so
    4 ETW000                                                                              46  83.113694
    4 ETW000  [dev trc     ,00000]  New connection 0 created                              28  83.113722
    4 ETW000  [dev trc     ,00000]  0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
    4 ETW000                                                                              30  83.113752
    4 ETW000  [dev trc     ,00000]  db_con_connect (con_name=R/3)                         25  83.113777
    4 ETW000  [dev trc     ,00000]  find_con_by_name found the following connection for reuse:
    4 ETW000                                                                              25  83.113802
    4 ETW000  [dev trc     ,00000]  0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
    4 ETW000                                                                              26  83.113828
    4 ETW000  [dev trc     ,00000]  Got ORACLE_HOME=/oracle/IDS/102_32/ from environment
    4 ETW000                                                                             316  83.114144
    4 ETW000  [dev trc     ,00000]  -->oci_initialize                                     25  83.114169
    4 ETW000  [dev trc     ,00000]  Client NLS settings: AMERICAN_AMERICA.US7ASCII      2348  83.116517
    4 ETW000  [dev trc     ,00000]  Logon as OPS$-user to get SAPR3's password            60  83.116577
    4 ETW000  [dev trc     ,00000]  Connecting as /@IDS on connection 0 ...               18  83.116595
    4 ETW000  [dev trc     ,00000]  Allocating service context handle                     38  83.116633
    4 ETW000  [dev trc     ,00000]  Allocating server context handle                      24  83.116657
    4 ETW000  [dev trc     ,00000]  Attaching to DB Server IDS (con_hdl=0,svchp=0xa0d448c,svrhp=0xa0d4fec)
    4 ETW000                                                                              67  83.116724
    4 ETW000  [dev trc     ,00000]  Assigning server context 0xa0d4fec to service context 0xa0d448c
    4 ETW000                                                                           70815  83.187539
    4 ETW000  [dev trc     ,00000]  Allocating user session handle                        42  83.187581
    4 ETW000  [dev trc     ,00000]  Starting user session (con_hdl=0,svchp=0xa0d448c,srvhp=0xa0d4fec,usrhp=0xa0ddb80)
    4 ETW000                                                                              44  83.187625
    4 ETW000  [dboci.c     ,00000]  *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
    4 ETW000                                                                            3168  83.190793
    4 ETW000  [dev trc     ,00000]  server_detach(con_hdl=0,stale=1,svrhp=0xa0d4fec)
    4 ETW000                                                                              28  83.190821
    4 ETW000  [dev trc     ,00000]  Detaching from DB Server (con_hdl=0,svchp=0xa0d448c,srvhp=0xa0d4fec)
    4 ETW000                                                                              23  83.190844
    4 ETW000  [dev trc     ,00000]  Deallocating server context handle 0xa0d4fec         227  83.191071
    4 ETW000  [dbsloci.    ,00000]  *** ERROR => CONNECT failed with sql error '1034'
    4 ETW000                                                                              51  83.191122
    4 ETW000  [dev trc     ,00000]  Try to connect with default password                  29  83.191151
    4 ETW000  [dev trc     ,00000]  Connecting as SAPR3/<pwd>@IDS on connection 0 ...
    4 ETW000                                                                              30  83.191181
    4 ETW000  [dev trc     ,00000]  Allocating server context handle                      17  83.191198
    4 ETW000  [dev trc     ,00000]  Attaching to DB Server IDS (con_hdl=0,svchp=0xa0d448c,svrhp=0xa0d4fec)
    4 ETW000                                                                              41  83.191239
    4 ETW000  [dev trc     ,00000]  Assigning server context 0xa0d4fec to service context 0xa0d448c
    4 ETW000                                                                           45416  83.236655
    4 ETW000  [dev trc     ,00000]  Assigning username to user session 0xa0ddb80          24  83.236679
    4 ETW000  [dev trc     ,00000]  Assigning password to user session 0xa0ddb80          30  83.236709
    4 ETW000  [dev trc     ,00000]  Starting user session (con_hdl=0,svchp=0xa0d448c,srvhp=0xa0d4fec,usrhp=0xa0ddb80)
    4 ETW000                                                                              28  83.236737
    4 ETW000  [dboci.c     ,00000]  *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
    4 ETW000                                                                            3107  83.239844
    4 ETW000  [dev trc     ,00000]  server_detach(con_hdl=0,stale=1,svrhp=0xa0d4fec)
    4 ETW000                                                                              27  83.239871
    4 ETW000  [dev trc     ,00000]  Detaching from DB Server (con_hdl=0,svchp=0xa0d448c,srvhp=0xa0d4fec)
    4 ETW000                                                                              24  83.239895
    4 ETW000  [dev trc     ,00000]  Deallocating server context handle 0xa0d4fec         144  83.240039
    4 ETW000  [dbsloci.    ,00000]  *** ERROR => CONNECT failed with sql error '1034'
    4 ETW000                                                                              35  83.240074
    4 ETW000  [dblink      ,00419]  ***LOG BY2=>sql error 1034   performing CON [dblink#1 @ 419]
    4 ETW000                                                                              70  83.240144
    4 ETW000  [dblink      ,00419]  ***LOG BY0=>ORA-01034: ORACLE not available           25  83.240169
    4 ETW000                        ORA-27101: shared memory realm does not exist
    4 ETW000                        Linux Error: 2: No such file or directory [dblink#1 @ 419]
    2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_ora_tnsname = 'IDS'"
    I am sorry for not getting proper format as code.  
    Regards.
    RAJU

  • Web Dynpro applications not working on ECC 6.0 IDES

    Hi,
    I'm new to Web Dynpro and developed a custom Web Dynpro (including the application) on a ECC 6.0 IDES system. It's simple with a couple of input fields. When I test it (either via SAP GUI 7.1 or 7.2, or Web GUI), it appears on the browser ok but the screen is frozen. I can't enter anything into the fields, etc. I also tested SAP Web Dynpro applications and they act the same way, frozen screen. There aren't any errors displayed or any runtime errors in ST22. Please advise. I searched this forum but didn't see any issue similar to mine. The IDES vendor suggested I post the issue on SDN.
    John

    I guess it has do to with some sort of browser's font size or view settings.
    press ctrl +0  make the zoom 100% and font size medium and try again.
    thanks
    sarbjeet singh

  • Suggestion on Installation of ECC 6.0 IDES Version

    Hi,
    I am installing ECC 6.0 IDES in windows server 2003 with MSSQL Server 2005 as database. What should be the size I should allocate for the installation directory? Because when I have tried the same previously the files grow more than 10GB and since I don’t have enough space the installation fails. Suggest me on this and also let me know is there any other factors to be considered before installation. I have also planned to install solution manager in same server. which java version shall i use?
    Hard disk: 400GB and memory 3GB
    Kindly suggest in this regards.
    regards,
    Anandha Krishnan.R

    Is this the standalone system ur performing or client servers,configuration what u have is more than enough, u need to have soultion manger key for installing ECC6 any quries can mail  to [email protected]

  • SAP ECC 6.0 IDES KERNEL Update

    Dear experts,
    i have installed a SAP ECC 6.0 IDES on a Windows Server 2003 Enterprise 64 bits + MS SQL from the MarketPlace:
    -> http://service.sap.com/swdc
    -> Download
    -> Installations and Upgrades
    -> My Company's Application Components
    -> SAP ERP
    -> SAP ERP 6.0
    -> IDES-Version
    -> Windows Server
    -> Microsoft SQL-Server
    and in order to update my solution into EHP3, i need to update the Kernel witch is in 7.00 version.
    How and Where could i get the kernel update file?
    Is there any difference between SAP Netweaver and SAP ERP Installation?
    Thank you very much for your great help.
    Best regards,
    Pascal.
    PS: i already update the SPAM/SAINT version (number 33) and have a well configured MOPZ for confirmed files.

    Hello Pascal,
    The kernel is at a differnt location. Please go to:
    1. http://service.sap.com/swdc
    2. Download
    3. Support Packages and Patches
    4. Entry by Application Group
    5. Additional Components
    6. SAP Kernel
    Select the corresponding platform.
    You should download 2 kernel files: SAPEXE and SAPEXEDB. One is database independent, one is DB dependent. Unpack them to the kernel directory and the kernel then is upgraded.
    Best Regards,
    Joseph

  • How to find/add more Web Services in ECC 6.0 (IDES)

    Hi,
    i`m completly new to SOA and try to teach myself implmenting processes with Netweaver BPM.
    I already finished the Tutorials  about [Create a process driven Composite Application with CE 7.2|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/a0b4cd62-fb79-2d10-86b2-c683bd5c4d81]
    The tutorial uses the ES Worplace as the WS provider with the HU2 ECC System . I try to adopt the Tutorial to our own ECC 6.0 (IDES) System instead of using the ES Worplace and HU2.
    The problem is, thats in WSADMIN there are too little Webservices in SOAP Applications for XI Proxies (the ones starting with ECC_ ...) 
    For Example: I need the Webservice "Create Purchase Request" -

    Hi,
    Enterprise Services are delivered by SAP with Enhancement Packs (Ehp). So number of services you can see depend on your Ehp and activation of business function while installing Ehp.
    You can see ES in transaction SICF (to activate) and you can search services in transaction SE80->Repository Information System ->Enterprise service (search).
    Regards,
    Gourav

  • Before using the current Mac version Yosemite, I did not have an Administrator password.  It seems now that one is required to unlock and make changes in settings.  I have tried all my usual passwords but to no avail.  any ideas???

    Before using the current Mac version Yosemite, I did not have an Administrator password.  It seems now that one is required to unlock and make changes in settings.  I have tried all my usual passwords but to no avail.  any ideas???

    Boot into Recovery. OS X: About OS X Recovery - Apple Support
    Select Terminal from the Utilities menu.
    At the prompt type,
    resetpassword
    Hit return.
    Follow the prompts in the utility to select hard drive, then user.
    Reset the password.
    Exit the utility and restart.
    You will need to log in with your new password, but your keychain will not be reset.
    I’m not sure what access you’ll have to the old keychain since it didn’t have a password. You may be able to get into the keychain and reset the password to match your login password.

  • Is it possible to create Adobe Interactive form in ECC 5.0 IDES using WDA?

    Hi every body,
    I am trying to create an adobe interactive form in ECC 5.0 IDES using Web Dynpro for ABAP. But I am facing some configuration problems. My doubt here is -> "Is it possible to create abobe interactive forms in ECC 5.0 IDES using Web Dynpro for ABAP ?"
    Please help me out.
    thanks in advance,
    best regards,
    naveen.

    Hi Naveen,
    ECC 5.0 is NW04 - not NW04s so you don't have WDA at all as you should be able to see from e.g. it not appearing in the list of possible programming objects in transaction SE80.
    You'd need ECC 6.0.
    Double-check your SAP_BASIS release in menu System > Status > Component Information.  If it says 6.40 then that's no good... you need to be on 7.00.
    You can still use Java WebDynpro with ECC 5.0 of course.
    Regards,
    Jocelyn

  • SAP Best Practices on ECC 6.0 IDES

    Hi,
    We are trying to implement SAP Best Practices on ECC 6.0 IDES Server.
    1) IDES Server has patch level greater then the one mentioned in the implementation guide. Is it ok to continue with SAP Best Practices installation.
    2) Uploading Notes through t-code SNOTE gives an error stating" Data file of SAP Note is incomplete". Please suggest how to proceed with applying notes.
    We are using tcode SNOTE --> Goto --> Upload SAP Note.
    Thanks & Regards,
    Satish

    Hi
    check if the SAP note has some pre-requisites?
    Ensure that you follow the procedure regarding the note upload:
    Do not copy & paste, ALWAYS quote the source.
    http://help.sap.com/saphelp_nw04/helpdata/en/7c/04f33925f12d20e10000000a114084/content.htm
    Read the "Rules of Engagement"
    SAP download manager is required for it.
    SAP Best Practices package specifies prerequisites to install the SAP application.
    Ravi
    Edited by: Juan Reyes on May 21, 2009 4:59 PM

  • SAP ECC 6.0 IDES connectivity with internal BI server

    Hell All,
    We have a connectivity issue for SAP BI with ECC. we have a sap ECC6.0 EHP3 instance running in the customer landscape used for training requirement. In the ECC 6.0 we do also have SAP BI server in the same instance. Now customer want to use the same BI server which is in the same SAP ECC 6.0 IDES without installing an additional instance just for training purpose. As a part of the acitivty we do need to know whether we can configure the BI to R/3 data extraction for this instance. ECC have 800 client and BI also works in the same 800 client. Can we configure the SAP ECC to BI source system configuration and do the R/3 to BW data extraction scenarios. also want to know whether we can do the Process chains and other stuff for training requirements.
    Hemanth

    Hello colluges/friends,
    any suggestions on this?
    Hemanth

  • System Config for ECC 6.0 IDES

    Hi all..
    what's the  system requirement for ecc 6.0 ides ...
    okay  bye

    Hi,
    Hardware Requirement for Central System
    I. Minimum disk space
    1. Database Software
    1 GB (x64)
    2 GB (IA64)
    2. SAP system files (not including paging file)
    5 GB (x64)
    8 GB (IA64)
    3. SAP database files (not including paging file)
    76 GB
    4. 4.3 GB of temporary disk space for every required installation DVD that you have to copy to a local hard disk
    II. Minimum RAM 4GB
    III. Paging file size 1 times RAM plus 8 GB
    Hardware Requirements for a Distributed System
    I. Minimum disk space
    1. Database software
    1 GB (x64)
    2 GB (IA64)
    2. Database instance (not including paging file)
    76 GB
    3. Central instance (not including paging file)
    5 GB (x64)
    8 GB (IA64)
    4. In addition you require 4 GB (x64), or 8 GB (IA64) per additional platform.
    5. Dialog instance (optional) (not including paging file)
    2.5 GB (x64)
    5 GB (IA64)
    5. Temporary disk space for every required installation DVD that you have to copy to a local hard disk:
    4.3GB
    II. Minimum RAM 2 GB
    III. Paging file size n Database instance
    1.5 times RAM
    Central instance:
    1 times RAM plus 8 GB
    Dialog instance (optional)
    1 times RAM plus 8 GB
    These all data you can find in the Installation Guide for ECC6.0
    Thanks,
    Nitesh Jain

  • Field for ECC 6.0 IDES

    Hi All,
    I would like to download ECC 6.0 IDES (ERP) for Oracle and SQL Server for Window. Which file does I need to download from Market Place?
    Thank.

    Hi Dusit,
    Follow this path.
    http://service.sap.com/swdc --->SAP Software Distribution Center ---> Downloads -->Installations and Upgrades -->My Company's Application Components >SAP ERP> SAP ERP 2005 -->IDES-Version --> Windows --- SQL server.
    Under this download the revelent media list as described in the installation guide.
    You would need the following
    Installation Master CD
    Java component CDs
    Export CDs
    Kernel CD
    Language CD
    Please go through the installation guide before downloading the software to check the correct media list.
    You need OSS ID for download.
    Reward if helpfull.
    Regards,
    Imran
    Edited by: Imran Khan on Feb 20, 2008 8:57 AM

Maybe you are looking for