Password Sync Error Message

Hi, hope someone can help.
have installed 32 bit passwordsysnc.dll on ad server 2003 R2 connecting to sun IDM 8.1.1 using the direct method.
It seems to function correctly and password changes are being synced, but each change results in an event log error on the AD server as follows:
"While processing account gguava, password sync was unable to connect to the servlet to post the synchronization message. Error: ."
The trace log seems to indicate that the password change event is submitted successfully and then the error occurs. i.e:
11/29/2010 13.38.03.834000 [3196] (e:\waveset\build\idm8110-36\src\wps\passwordsync\passwordsyncdll\pwsyncclient.cpp,48): Connecting to leghorn.cdu.edu.au on port 7777
11/29/2010 13.38.03.834000 [3196] (e:\waveset\build\idm8110-36\src\wps\passwordsync\passwordsyncdll\pwsyncclient.cpp,72): Adding request parameter: 'JNDIProperties'=''
11/29/2010 13.38.03.834000 [3196] (e:\waveset\build\idm8110-36\src\wps\passwordsync\passwordsyncdll\pwsyncclient.cpp,72): Adding request parameter: 'accountId'='configurator'
11/29/2010 13.38.03.834000 [3196] (e:\waveset\build\idm8110-36\src\wps\passwordsync\passwordsyncdll\pwsyncclient.cpp,72): Adding request parameter: 'clientEndpoint'='SHOEBILL'
11/29/2010 13.38.03.834000 [3196] (e:\waveset\build\idm8110-36\src\wps\passwordsync\passwordsyncdll\pwsyncclient.cpp,72): Adding request parameter: 'connectionFactory'=''
11/29/2010 13.38.03.834000 [3196] (e:\waveset\build\idm8110-36\src\wps\passwordsync\passwordsyncdll\pwsyncclient.cpp,72): Adding request parameter: 'direct'='true'
11/29/2010 13.38.03.834000 [3196] (e:\waveset\build\idm8110-36\src\wps\passwordsync\passwordsyncdll\pwsyncclient.cpp,72): Adding request parameter: 'email'='[email protected]'
11/29/2010 13.38.03.834000 [3196] (e:\waveset\build\idm8110-36\src\wps\passwordsync\passwordsyncdll\pwsyncclient.cpp,72): Adding request parameter: 'emailEndUser'='false'
11/29/2010 13.38.03.834000 [3196] (e:\waveset\build\idm8110-36\src\wps\passwordsync\passwordsyncdll\pwsyncclient.cpp,72): Adding request parameter: 'jmsPassword'='*******'
11/29/2010 13.38.03.834000 [3196] (e:\waveset\build\idm8110-36\src\wps\passwordsync\passwordsyncdll\pwsyncclient.cpp,72): Adding request parameter: 'jmsUser'=''
11/29/2010 13.38.03.834000 [3196] (e:\waveset\build\idm8110-36\src\wps\passwordsync\passwordsyncdll\pwsyncclient.cpp,72): Adding request parameter: 'password'='*******'
11/29/2010 13.38.03.834000 [3196] (e:\waveset\build\idm8110-36\src\wps\passwordsync\passwordsyncdll\pwsyncclient.cpp,72): Adding request parameter: 'queueName'=''
11/29/2010 13.38.03.834000 [3196] (e:\waveset\build\idm8110-36\src\wps\passwordsync\passwordsyncdll\pwsyncclient.cpp,72): Adding request parameter: 'resourceAccountGUID'='8241442873f21f419938428b3f3e9a23'
11/29/2010 13.38.03.834000 [3196] (e:\waveset\build\idm8110-36\src\wps\passwordsync\passwordsyncdll\pwsyncclient.cpp,72): Adding request parameter: 'resourceAccountId'='CN=gguava(gerri guava),OU=AliceSprings,OU=People,DC=cdu-staff,DC=local'
11/29/2010 13.38.03.834000 [3196] (e:\waveset\build\idm8110-36\src\wps\passwordsync\passwordsyncdll\pwsyncclient.cpp,72): Adding request parameter: 'resourcePassword'='*******'
11/29/2010 13.38.03.834000 [3196] (e:\waveset\build\idm8110-36\src\wps\passwordsync\passwordsyncdll\pwsyncclient.cpp,72): Adding request parameter: 'resourcetype'='Windows Active Directory'
11/29/2010 13.38.03.834000 [3196] (e:\waveset\build\idm8110-36\src\wps\passwordsync\passwordsyncdll\pwsyncclient.cpp,72): Adding request parameter: 'sessionType'=''
11/29/2010 13.38.03.834000 [3196] (e:\waveset\build\idm8110-36\src\wps\passwordsync\passwordsyncdll\pwsyncclient.cpp,97): SendToServlet: opening direct connection
11/29/2010 13.38.08.475000 [3196] (e:\waveset\build\idm8110-36\src\wps\passwordsync\passwordsyncdll\pwsyncclient.cpp,221): httpSendRequest succeeded
11/29/2010 13.38.08.475000 [3196] (e:\waveset\build\idm8110-36\src\wps\passwordsync\passwordsyncdll\pwsyncclient.cpp,336): Info flag 19 returned 400
11/29/2010 13.38.08.475000 [3196] (e:\waveset\build\idm8110-36\src\wps\passwordsync\passwordsyncdll\pwsyncclient.cpp,339): Error retrieving header information from servlet.
11/29/2010 13.38.08.475000 [3196] (e:\waveset\build\idm8110-36\src\wps\passwordsync\passwordsyncdll\pwsyncclient.cpp,320): Failed to convert contentLength
11/29/2010 13.38.08.475000 [3196] (e:\waveset\build\idm8110-36\src\wps\passwordsync\passwordsyncdll\pwsyncclient.cpp,277): servlet contact failed
11/29/2010 13.38.08.475000 [3196] (e:\waveset\build\idm8110-36\src\wps\passwordsync\passwordsyncdll\pwsyncclient.cpp,285): Exit: PwSyncClient::SendToServlet
11/29/2010 13.38.08.475000 [3196] (e:\waveset\build\idm8110-36\src\wps\passwordsync\passwordsyncdll\lhpwic.cpp,96): Enter: writeToEventLog
11/29/2010 13.38.08.475000 [3196] (e:\waveset\build\idm8110-36\src\wps\passwordsync\passwordsyncdll\lhpwic.cpp,118): Exit: writeToEventLog
11/29/2010 13.38.08.475000 [3196] (e:\waveset\build\idm8110-36\src\wps\passwordsync\passwordsyncdll\lhpwic.cpp,351): Enter: EmailNotification
11/29/2010 13.38.08.475000 [3196] (e:\waveset\build\idm8110-36\src\wps\passwordsync\passwordsyncdll\lhpwic.cpp,354): Email is not enabled
11/29/2010 13.38.08.475000 [3196] (e:\waveset\build\idm8110-36\src\wps\passwordsync\passwordsyncdll\lhpwic.cpp,596): Got initialization mutex
11/29/2010 13.38.08.475000 [3196] (e:\waveset\build\idm8110-36\src\wps\passwordsync\passwordsyncdll\lhpwic.cpp,609): Released Mutex
11/29/2010 13.38.08.475000 [3196] (e:\waveset\build\idm8110-36\src\wps\passwordsync\passwordsyncdll\lhpwic.cpp,230): Exit: SyncPassword
I have 8.1.1 password sync working OK in a test environment, the main difference being the port is a more standard 80 (instead of 7777 in production)
Has anyone encountered this? How do I fix it? is it important even?
Thanks in advance.

I had this exact error.
For future reference:
Double check the user password and status of the account by loging in the user interface with the account you are using.
I did a password reset on the waveset service account used by the password sync. When I logged in the user interface with that account, it prompted me to enter a new password. Upon entering a new password and reflecting the change in the Password Sync, synchronisation resumed.

Similar Messages

Sync Error message reprocessing in MI server

In MI 2.5 server, all sync error messages with staus I-Error need to be resolved manually and then reprocessed.
Errors are generally data issues(Equipment type mismatch etc).
In MI 7.1 , there are better data monitoring and administration capabilities. Is there a better automated way in MI 7.1 where by some of the I-Error status messages could be corrected and reprocessed based on some defined logic and rules.
Thanks & Regards,
Amandeep Aggarwal

Hi,
custom services plugged-in in the message flow can be used to correct the fields of the message during the processing.
Since your requirement is to modify the message only incase of errors and during re-processing, the custom service has to be a little more intelligent than just modifying the data ..like reading from DOE monitoring data to figure out whether that message failed and is being re-started which is possible as far as i think.
In tcode sdoe_wb on selection of your SCV.,expand the data object and inturn the flow definition tree. Choose the flow where you wish to add a custom service. Press create button in right panel. Give FM or class method. Save it and generate your data object.The message body and the message header is available as parameters in the custom service , there are some specific places where a write service could to be placed and so on..
You can also refer the sample custom service SDOE_SAMPLE_CUSTOMSERVICE class shipped by SAP.
To know more about custom services, check out this link : [custom services|http://help.sap.com/saphelp_nwmobile71/helpdata/en/6d/bf104d163849d1af313c492655e0f7/content.htm]
Regards,
Liji

Sync Error Message

I received a sync error message:
EFMSERROR.102
while I was trying to sync my ibook to .mac
How do I fix?

Hello pksolecki,
Welcome to the forums.
I would suggest you contact you mobile service provider and ask that this issue be escalated to BlackBerry support for in depth investigation and analysis.
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Sync error message: CRRecurringl: SetRecurringDates Start date is invalid

Sync error message: CRRecurringl: SetRecurringDates Start date is invalid
I have deleted and re-entered every recurring calendar entry. This has not solved the problem.
I sync on 2 computers. The deskop computer using BB Desk Top 7.0 syncs fine. The laptop using BB Desk Top 7.1 does not sync. 2.5 hours wasted.
any other suggestions.?
BB 9900 7.0 bundle 2406
carrier; Telus
desktop version 7.1.0.37

I have just learned that that error message is generated by an appointment in your BlackBerry Calendar with a recurring start date prior to 01/01/1900. So, either delete all BlackBerry Calendar items and resync or find the one entry that has a date before 1900.

HT201262 cannot go to cmd+V or S, I cannot change my password. -error message ===boot file path system library coreservices boot.efi.... Please help.

cannot go to cmd+V or S, I cannot change my password. -error message ===boot file path system library coreservices boot.efi.... Please help.

Got it thanks macjack . Command + S on restart.
In this case Nad69-Breizh did you try restarting with the option key down and re-selecting the boot drive.
If no Recovery option, try command option R for internet recovery. Takes some time to load up.

Password sync error using SSL

Hello All,
I installed password sync in a Windows 2003 server SE.
The application server(websphere 5) is using SSL.
The waveset version is 5.5.
I manualy registered the dll DotNetWrapper.dll but I am still getting the following log:
,110): Version: 'Sun Identity Manager 5.0 (20041020 SP 2)'
pwicsvc.cpp,594): Enter: ReadRegisterySettings
pwicsvc.cpp,637): Error reading USE_SSL from registry.
pwicsvc.cpp,666): Proxy Port: 8080
pwicsvc.cpp,751): Error reading SecurityFlags from registry.
pwicsvc.cpp,763): Error reading ConnectionFlags from registry.
pwicsvc.cpp,779): Exit: ReadRegisterySettings
pwicsvc.cpp,511): WINVER: Windows Active Directory
pwicsvc.cpp,557): Service::svc
pwicsvc.cpp,374): Enter: waitForIntercepts
pwicsvc.cpp,402): Waiting for client.Requests Processed: 0 failures: 0
pwicsvc.cpp,416): read from pipe
pwicsvc.cpp,420): REQUEST: SRTCTkASGZP1++W/mobdreEAtquTHmFJDTpZ+1fsztFSWSU2j5QdZw==
pwicsvc.cpp,441): GETTING NEW SOAP CLIENT
pwicsvc.cpp,228): Enter: GetClient
pwicsvc.cpp,245): Soap client created
pwicsvc.cpp,246): ClientTimeout: 10000
pwicsvc.cpp,256): Proxy server not specified
pwicsvc.cpp,260): EndpointURL: https://servername:443/idm/servlet/rpcrouter2
pwicsvc.cpp,287): SSL Enabled
ptor.cpp,67): RAEncryptor::Decrypt3DES: input length (16) moded to 2
pwicsvc.cpp,301): Login failed error code : -2147467259. Disassembing client
pwicsvc.cpp,321): Exit: GetClient
pwicsvc.cpp,450): **ERROR: Failed to get soap client.
pwicsvc.cpp,402): Waiting for client.Requests Processed: 1 failures: 0
Any help will be appreciated.
Itay.

I would like to add that .NET and IE 6 are installed with the OS (Win2003) by default.
When I surf to the to the endpointURL I get the following message:
ERROR: org.openspml.server.SOAPRouter: GET is unsupported

After iOS update, my iTunes no longer sync 'ERROR MESSAGE'

After the new iOS update on my phone, my iTunes on my MAC will not sync. The error message I receive says I need to update iTunes, but it's already updated to the last version and there are no updates available when I go thru the iTunes menu. HELP!

Apple fans. Don't fret. I struggled with this since Saturday when I got my new phone. im pretty tech savvy with a background in computers and I'm a mechanic by trade so i generally know how things work and figure out anything. After trying everything you all have probaby tried as well I did some comparisons to my wife's phone. I paid all three of our cars to her phone easily. One is a Honda hand free link, the other a Hyundai sonata system and the last a pioneer aftermarket Bluetooth with streaming,avrcp etc. after her iPhone 6 128gb connected and worked flawlessly, I narrowed the problem down to my phone specifically. It's not the phone, it's not the ios8, it's not your car. It's your settings. All I did was reset network settings and bam. Problem fixed. You see I messeed with a bunch of stuff in the beginning trying to avoI'd data overage and must have turned something off by mistake. Another theroy I have is my iPhone 5 setting were copied over in the process of migration and they were maybe incompatible with the iPhone 6 itself. Either way post back and let me know if this helps

I can no longer access a password protected Numbers file with the correct password. Error message only says the file "cannot be opened."

I'm using Numbers version 3.2.2.
Suddenly I cannot access my password protected Numbers file with the correct password. I have the correct password written down so I know I haven't made a mistake.
The response box that pops up says that the file cannot be opened. There are no other options for me to choose from.

Also, I tried to open it through an older version of Numbers but it sent this error message.

How to get rid of sync error message

Hello,
When I first installed CC on my computer, our company's proxy was refusing the connections to the Adobe cloud servers and I couldn't sync my test file "test.indd".
From that moment I'm getting the "unable to sync "test.indd" due to server error" message.
After having determinated all the server ips that Adobe uses in the Amazon cloud and added manually the exeptions to our proxy server, syncing files finally worked. Great thanks to Adobe for not giving the server ips out and not helping at all.
Syncing files now works but I keep receiving the "unable to sync "test.indd" due to server error" message.
I have tried to recreate the file with the exact filename and sync it again but that doesn't solve my problem.
As a paying customer (7 x CC for teams licences) I contacted the Adobe support and they told me that they don't do any support for server problems !???!!!!! and redirected me to this forum page http://helpx.adobe.com/creative-cloud/kb/arent-my-files-syncing.html which has nothing to do with my problem. Can't find any words to describe that customer support...
Maybe there is someone in this community willing to do the job of Adobe support and help me?

Thanks for your reply Mylenium,
Sorry I forgot to mention my system: Windows 7 Pro 64Bit SP1.
In C:\users\You\AppData\Roaming I find many cache related files, but only a few that are not related to any specific CC app:
C:\Users\***\AppData\Roaming\Adobe\CEPServiceManager4\cache\ExtensionManifest
C:\Users\***\AppData\Roaming\Adobe\Common\Media Cache
C:\Users\***\AppData\Roaming\Adobe\Common\Media Cache Files
I have backuped those files, removed from their respective folders and restarted the CC Desktop app but the message is still popping up.
Does anyone know in which file(s) the sync cache is stored exactly? I can't find any information about that on the net nor forum.

Voice memo won't sync - error message

I have an iPhone 5 and the latest version of iTunes on my computer. I have the setting on 'sync manually'. The first time I clicked sync to transfer a voice memo to my computer an error message came up and it didn't transfer. Now when I click again it's as if iTunes already thinks it has copied the voice memo over but it isnt there. Any ideas? I need this file on my computer urgently.

Hi Catherineduffy!
I have an article here that I believe will help you get this file onto your computer:
iPod: Recording voice memos
http://support.apple.com/kb/ht2396
Specifically, I think these instructions at the bottom of the article will be most relevant for you:
Transferring a recording to a computer
Manually
Voice memos are saved in a Recordings folder on iPod in the WAV file format. If you enable iPod for disk use, you can drag voice memos from the folder to copy them.
Synchronize
If iPod is set to update songs automatically and you record voice memos, the voice memos are automatically downloaded to a playlist in iTunes when you connect iPod. Once downloaded, the voice memos are removed from the Voice Memos folder on your iPod. To play the voice memos that have been synchronized to your computer in iTunes, select the Voice Memos playlist on the left side of the iTunes window. To play the synchronized voice memos on the iPod, select the Voice Memos playlist in the Music menu, not the Voice Memos menu in the Extras menu.
So that file will sync automatically to your computer with automatic sync selected. You may want to try automatic syncing to get the file from your phone onto your computer if that file is still on your phone. Thanks for coming to the Apple Support Communities!
Regards,
Braden

Itunes wont sync error message this computer is not authorized

itunes will not sync my purchased songs to my new ipod touch, i get an error message that says, "some of the songs purchased cannot be transferred, this computer is not authorized, go to store, then authorize this computer." I have done this over and over again, I have even deauthorized and then RE authorized again and again, I still get the same message. Can someone please please please HELP ME?

I have been renting movies on my MBP and a previous MBP for years, and have always been able to transfer the rentals to an iPhone. I always rent on the MBP and not the iPhone. However due to a NEW authorisation problem recently I have not been able to play these movies through the Apple TV (V2) like I have been doing. Others on the Internet have also started having this problem. I have to resort to airplaying the movie from the MBP over to the Apple TV, which is a royal pain. What's the point of having all this gear in the family room when I have to get up and go to the office and start the movie playing from there?! Anyway, also recently I have not been able to move rented movies to the iPhone. I have tried recursively chmodding the Shared folder as described here
http://support.apple.com/kb/TS1277
and it didn't help.
So now, if we go on a long road trip or flight, we can't bring the rented movies on an iPhone/iPad. This is a big problem. No I am not going to bring the laptop on the trip. The iTunes library is on an external disk on the LAN anyway.
Re the country comments, I'm in Canada.

Cannot sync, error message reads" not enough access privileges for this operation

When trying to sync my ipad and iphone with my PC i get this error message "Cannot be sybced. You do not have enough access privileges for this operation". I have a new PC but i have successfully synced these devices before. can anybody please help ?

Just thought I'd put out an update on my problem. It has been solved. I spoke to a tech at Apple at 1-800-275-2279. She had me try a few things that didn't help. Her last suggestion was to uninstall QuickTime and iTunes then reload. She sent me the uninstall instructions at http://www.info.apple.com/kbnum/n93698 which I followed. When speaking to her I told her I was afraid to do this because I saw other people on the discussion board who tried this and lost all of their music. She assured me that that wouldn't happen. I did the uninstall then the install. (Just a note here, I also read on the message board that someone said that to cure this problem you should do the install then open up QuickTime before opening iTunes. I did this also but don't really know if it made a difference.
Bottom line is I uninstalled QuickTime and itunes per the instructions at the site shown above. I then installed both again from www.apple.com/itunes/download. After the download I ran the install and unchecked the box to let itunes start after the install. I then opened Quicktime then closed it. I then opened iTunes and all of my music was there and I didn't get the anoying "iTunes is not set as the default player" and the error after trying to set it. The problem described in my first posting of copying CD's is also gone. So beleive it or not, EVERYTHING is working just like it should. Some of the above steps might not be required but I would follow them step by step because I know they worked for me.

How can I stop syncing error message: "Microsoft Word has encountered a problem and needs to close"

On my Mac I am endlessly receiving this message: "Microsoft Word has encountered a problem and needs to close" it relates to the sync which between Calendars (iCal and Entourage) .
The error messages were coming up every 5 SECONDS and were impossible to deal with. They stated there was a 'Blame Module' which wasEntourageCore
I have been unable to find any idea how to resolve this.
Please can anyone describe what they have done to sort this?
I am using MS Office 2008.
Turning off the sync between the two calendars was not the answer, as the messages continued. So I have temporarily disabled the sync between iCal/Entourage and my iPad. This has prevented the error message, but obviously means I must enter diary dates manually on iPad which is the whole point of the sync!
I haven't found a way to sync between iCal and iPad - this would be a possible work-round. But I'd be so grateful to know how to resolve the sync error.

On my Mac I am endlessly receiving this message: "Microsoft Word has encountered a problem and needs to close" it relates to the sync which between Calendars (iCal and Entourage) .
The error messages were coming up every 5 SECONDS and were impossible to deal with. They stated there was a 'Blame Module' which wasEntourageCore
I have been unable to find any idea how to resolve this.
Please can anyone describe what they have done to sort this?
I am using MS Office 2008.
Turning off the sync between the two calendars was not the answer, as the messages continued. So I have temporarily disabled the sync between iCal/Entourage and my iPad. This has prevented the error message, but obviously means I must enter diary dates manually on iPad which is the whole point of the sync!
I haven't found a way to sync between iCal and iPad - this would be a possible work-round. But I'd be so grateful to know how to resolve the sync error.

Microsoft Outlook sync error message

Here's the error code: 08004fd28. The sync is set to only sync the calendars. Blackberry Desktop Manager queries inconsistencies between the calendars, then shows the error message just noted. Can anyone help?

Hi,
What Desktop Manager are you using? You can try to uninstall and reinstall DTM. Make sure to install the latest Device software as well. You can download these through the BlackBerry website.
So it also gives out this error during the calendar sync? It is possible that there is a corrupt calendar entry on Outlook. What you can do is to do an advance logging. The process is a bit complicated cause you need to edit some intellisync settings to extract the log files. By extracting the log files you will be able to pinpoint the corrupt calendar entry data.
For this it's best for you to contact you carrier and ask for support.
Thanks.

IPad 1 syncing error message

For some reason, my iPad 1 stopped syncing Instapaper, so I uninstalled the app and went to reinstall and found that it still wouldn't work. So I did a clean install from a back up and now after every sync I get an error message saying (user name)> (user name) file can't be found and can't be synced, but after unplugging the iPad is normal. What is causing this error message and how can I get rid of the message?

OK, here's how I fixed my sync problem. First, when starting up iPhoto, press and hold down the cmd & alt buttons on your keyboard and this will bring up a dialog box, select all check boxes and hit rebuild. This will take some time so have a coffee or go and do something else, then when you come back, try syncing again in iTunes and the error message should be gone!

Password Sync Error Message

Similar Messages

Maybe you are looking for