Patch installer not overwriting the existing one
Patch installer not overwriting the existing one
Hi, for one my LabVIEW application, I have created two installers
Including all the required additional installers (Installer)
With no additional installer (patch installer)
So that, for further versions they can use only patch installer.
When I try to installer both the installer of same version which created two icons in “Control Panel\Programs\Programs and Features” as shown below.
When I am installing the second installer (patch), I expected that it will either overwrite the existing or it will not allow me to install. But both didn’t happen.
Please share your thoughts on the above.
Thanks in advance
Phani
Solved!
Go to Solution.
Thank you..
I got another doubt on the same.
"Upgrade Code" should be same
1.)For both installers (normal and patch)?
2.)For all the versions?
which one is correct in the above two?
Similar Messages
-
RoboHelp 9-New Folder/Topics are not overwriting the old ones.
Hi.
I am updating a user guide that I did not create. My procedure once I have completed my updates is to go under My RoboHelp Projects in Windows Explorer, find the project name then open it's folder. I zip the !SSL! folder and post it to a common site for developers to grab the files.
I am having an issue with not being able to zip the folder due to a long path name. I have completely deleted the old Folders and Topics and reentered them all, using shorter path names.
When I try to zip the !SSL! folder after my changes, it still displays an error stating it cannot zip the folder due to the path name being too long.
However...the path name displayed in the error message is with the previously deleted folders/topics.
When I go into Windows Explorer and look at the folders which are shown, I still see old information, which I deleted within RoboHelp.
Am I able to delete old items when in Windows Explorer? I thought it all had to be done within RoboHelp. I do not want to risk corrupting my user guide because it would literally take months to recreate.
Thank you.Hi there
So, if you generate the output, then at the final dialog tell RoboHelp to view the output, the new content isn't there?
That would be odd, but not impossible.
My guess is that your output folder is different than the folder you are looking at.
Cheers... Rick -
Hi!
I've just updated my iPad to iOS 7.02 and I'm not able now to download new apps nor update the version of the existing ones. All of them are "waiting"... for ever.Even, when trying to download a new app, a "dratf" icon appears on the ipad, not the app's own icon...
I've tried to switch off and on the iPad, disconnect and reconnect the itunes id... and nothing works. Even deleting an app, to download it again, doesn't work. It even doesn't ask for my password!!! (Stays with the small square with a circle around, the one that gets "bolder" while downloading... but it doesn't get bolder now. Just stay...).
Any suggestions? I wouldn't like to reset the iPad, since I've got data in some apps that I wouldn't like lo loose...
By the way, I can not either delete some apps with thos "draft" icons... even when the alert that appears when trying to do that is shown and select "ok".
Thank you in advance!
Best Regards,
Carlos.Hi,
Thank you, Once_was_lost, but it doesn't work either. I tried it yesterday as an option (I think you're referring to the options of those apps in the settings app).
The problems are still here... I've been able to update some apps using the PC itunes (connecting the app to it), but all the other apps are still "wating", and I have two new strange things:
* I cannnot remove the apps that are downloading (at least those that are supposed to be downolading ) . But I could remove one from the PC... and now there is an "empty line" in the "to update apps list".
* Stranger: though I cannot download new apps or music from the store, I can do in-app purchases!!! In that case, I'm asked for the password and the item downloads. How is it possible?????
I can download with the same user in the PC, in the iPhone... but not in the iPad .
I'm getting mad... -
I am trying to set an open DNS using the MacAir. But when I tried to flush the existing one at utilities/terminal, it will not work. I am using Yosemite. May I know what should be the command line so that I can shift to an open DNS? Thanks
>SystemPreferences>Network>DNS
-
How do I add multiple songs to an existing playlist from the (no longer called) Library? Highlighting multiple songs and clicking the "Add to" button will only add the one with the little arrow, not all the highlighted ones! I am using the "new" iTunes.
For the moment there isn't a way for us end-users to control what is "matched" or "uploaded." That is purely a result of Apple's server-side algorithms.
To re-add multiple songs at once simply highlight all the songs you want to re-add, then right-click (or Control+click) the list and choose "add to iCloud." -
can somebody tell me what to do with my iMessage in Ipad 2? before i can send message tru iMessage from my contacts who is having the same applications, for the existing one, i can send message but if i want to send message from a new contact, its not working....
Please Rephrase your query.
-
Bugreport: Seed updates all languages, not only the selected one
I just encountered a "Bug" when seeding a multilingual translation.
It looks as if SEED would insert only values for the chosen language mapping (good!), but in case of an update overwrite the values in all languages, not only the chosen one.
I know it is not that bad, but causes some irregular statistics after seeding.
e.g. my applications main language is "eo", language mappings for "en", "de", "es".
When i change a single text (e.g. button label) in the main app and do a seed for "en" i get "3 existing attributes updated and may require translation" (because there are 3 languages...). when i do a seed for "de" right afterwards i get "0 existing attributes updated and may require translation".
brgds,
Peter
Blog: http://www.oracle-and-apex.com
ApexLib: http://apexlib.oracleapex.info
BuilderPlugin: http://builderplugin.oracleapex.info
Work: http://www.click-click.atApparently you have more choice than you are aware of. Thunderbird has three ways to sear messages.
I am guessing from what you say that you want to '''find''' (Ctrl + Shift + F) instead of '''global search''' (Ctrl+K) or '''quick filter''' (Ctrl + Shift + K)
Note that global search offers options
<img alt="" src="https://support.cdn.mozilla.net/media/uploads/images/2014-08-25-16-49-59-21b72c.png" height="106" width="217">
First your messages
Then the internet
Then people in your address book
''Yes I know your a mac user, but they tell me macs have a CTRL key these days an you do not need to use3 command'' -
How to find certain words based on table without overwriting the old one
Hello,
I have a list of words available in one particular table, based on those records i need to match it up with one specific column on another table. Based on that match i need to update the same. below is answer for this question;
Design a new query. Select your data table and your words table. No join line between them.
Drag datatable.* to the design grid, and the field to check. In the criteria for that field write:
Like '*' & [wordstable]![wordsfield] & "*"
(of course you change this to your object names)
But now my another question is that how i can do update without replacing the existing one. Like for example " Peter is engineering degree".
In this example if i have words like ring and degree on my reference table, then as per the solution it will update the degree first then later if its find ring on the text then it will overwrite the degree on the particular column. How i can prevent
this?
VinWin06But now my another question is that how i can do update without replacing the existing one. Like for example " Peter is engineering degree".
I think what you are saying is that you want to avoid specious substring matches such as finding 'engineering' when searching for 'ring'. Right? If so use the following function rather than the LIKE operator to identify the 'word' rather than merely
a substring:
Public Function FindWord(varFindIn As Variant, varWord As Variant) As Boolean
Const PUNCLIST = """' .,?!:;(){}[]/"
Dim intPos As Integer
FindWord = False
If Not IsNull(varFindIn) And Not IsNull(varWord) Then
intPos = InStr(varFindIn, varWord)
' loop until no instances of sought substring found
Do While intPos > 0
' is it at start of string
If intPos = 1 Then
' is it whole string?
If Len(varFindIn) = Len(varWord) Then
FindWord = True
Exit Function
' is it followed by a space or punctuation mark?
ElseIf InStr(PUNCLIST, Mid(varFindIn, intPos + Len(varWord), 1)) > 0 Then
FindWord = True
Exit Function
End If
Else
' is it precedeed by a space or punctuation mark?
If InStr(PUNCLIST, Mid(varFindIn, intPos - 1, 1)) > 0 Then
' is it at end of string or followed by a space or punctuation mark?
If InStr(PUNCLIST, Mid(varFindIn, intPos + Len(varWord), 1)) > 0 Then
FindWord = True
Exit Function
End If
End If
End If
' remove characters up to end of first instance
' of sought substring before looping
varFindIn = Mid(varFindIn, intPos + 1)
intPos = InStr(varFindIn, varWord)
Loop
End If
End Function
You can supplement this with the following functions to find any or all of multiple words in the same string expression:
Public Function FindAnyWord(varFindIn, ParamArray varWordList() As Variant) As Boolean
Dim var As Variant
For Each var In varWordList
If FindWord(varFindIn, var) Then
FindAnyWord = True
Exit Function
End If
Next var
End Function
Public Function FindAllWords(varFindIn, ParamArray varWordList() As Variant) As Boolean
Dim var As Variant
For Each var In varWordList
If Not FindWord(varFindIn, var) Then
FindAllWords = False
Exit Function
Else
FindAllWords = True
End If
Next var
End Function
You can edit the PUNCLIST constant in the first function to allow for any other terminating or leading punctuation characters which may exist, in non-English text for instance.
Ken Sheridan, Stafford, England -
Does importing a custom altered new .adm file into mmc will overwrite the existing system.adm file?
Using Group Policy Objects to hide specified
drives
http://support.microsoft.com/kb/231289
i was about to hide few set of drives in my pc from other standard user's by using group policy object. but there are only few set of drives available by default. so by few surf in the official windows sites i found the above link that guide one to create
custom set of drives along the existing one in gpo, by creating a new .adm file and importing the same into it.
but my query is, in the given guide they have said that
"Microsoft does not recommend to change the System.adm file, but instead to create a new .adm file and import this .adm into the GPO. The reason is that if you apply changes to the system.adm file, these changes might get overwritten if Microsoft
releases a new version of the system.adm file in a Service Pack."
so weather the new .adm (with different name) file that i am going to import into it will replace/overwrite the already existing template (that is "Hide these specified drives in My Computer" in the GPO) or create a new one under "Configuration
--> Policies --> Administrative Template --> Classic Administrative Templates. "
please suggest....
thanks in advance....Hi,
Not really, the new .adm file won't replace/overwrite the already existing template. While, in my opinion, it would be better to make a backup for this default file in case there was any damage of your later operation.
Roger Lu
TechNet Community Support -
HT1175 Time Machine wants to start with a new, full backup instead of using the existing one
Hi, my Time Machine wants to start a new, full backup, instead of continuing with the existing one on the time Capsule.
Looking a the Troubleshooting guide, I've found the following piece of info, which is, as 99% of the times with the troubleshooting guides, totally useless to resolve my problem...
Message: Time Machine starts a new, full backup instead of a smaller incremental backup
There are three reasons why this may occur:
You performed a full restore.
Your Computer Name (in Sharing preferences) was changed--when this happens, Time Machine will perform a full backup on its next scheduled backup time.
If you have had a hardware repair recently, contact the Apple Authorized Service Provider or Apple Retail Store that performed your repair. In the meantime, you can still browse and recover previous backups by right-clicking or Control-clicking the Time Machine Dock icon, and choosing "Browse Other Time Machine disks" from the contextual menu.
It should be noted (hence the uselessness of the guide) that:
-I haven't performed ANY full restore
- I havent changed my computer name
- My computer has not had ANY repair, much less a hardware repair. Neither recently, nor in the 9 months I've owned it.
Which puts me back to square one, with the marginal improvement that now I have a way of browsing my old backups.
In the event I decide to start all over again, will there be a way for me to "sew" the two backup files?
Or will I always have to go the silly way around?
Anybody has any idea?
Thank you for your time (machine/capsule, your choice;-)Hi John,
no, that doesn't have anything to do with my problem.
Just look at the image below.
Time Machine thinks that the disk I've always used to do my backups has none of them.
If I open the disk with Finder, obviously they are where they should be.
It is even possible to navigate them as per the instruction reported above, but even following Pondini's advice #s B5 and B6 (which are more applicable to my problem) didn't solve the problem.
Actually, not being a coder, I'm always scared of doing more damage than good when I have a Terminal window open.
My question is: how is it possible that Apple hasn't thought of some kind of user command to tell the idiotic Time Machine software that a hard disk backup is a hard disk backup, no matter what?
Estremely frustrating and annoying: I'm wasting HOURS in trying to find a solution to a problem that should not have arisen in the first place...
Have a nice weekend
Antonio -
I have a new time capsule (replace my old time capsule). I want to erase my old one. My computer does not see the old one anymore, how do I connect it (the old TC is not connected to modem). I want to erase it and then use it as either a second hard drive (sired/sirelesly?) or as a hard drive/bridge. So,
1. why doesn't my cmputer see the old TC
2 once i have solved that, how do I erase the old one
3. Can I use the old one as a supplemental hard drive
a. wired?
b. wirelessly?
4. Can I use the old one as a range extender?
I know .. a lot of questions but I would appreciate any help.
Thankssgetraer wrote:
I have a new time capsule (replace my old time capsule). I want to erase my old one. My computer does not see the old one anymore, how do I connect it (the old TC is not connected to modem). I want to erase it and then use it as either a second hard drive (sired/sirelesly?) or as a hard drive/bridge. So,
1. why doesn't my cmputer see the old TC
2 once i have solved that, how do I erase the old one
3. Can I use the old one as a supplemental hard drive
a. wired?
b. wirelessly?
4. Can I use the old one as a range extender?
I know .. a lot of questions but I would appreciate any help.
Thanks
1. Because it is either the same IP as the new one or hidden by being plugged in as a second router.
To access it, isolate one computer from the existing network and plug it directly by ethernet to a lan port of the TC. Use the erase function in the TC to remove all the content of the hard disk.
Then go to the internet tab, connection sharing and select off bridged. You can then reconnect the TC to the network.. and the computer as well. The TC will act as bridged device.. getting IP from the main router and should then appear correctly in Airport utility.
2. I covered in 1. But you just go in airport utility manual setup. disk, and you will see the erase function. You can also set it to bridge and leave the erase until you put it back in the network.. but be careful you erase the right one.
3. You can use the old TC via wired or wireless.. although I would always stick to wired connection if possible. Speed on wireless is 10x worse than wired.
Also note the reliability goes down dramatically after 2 years.. a series 1 3 years old or more is ebay fodder unless you want to repair it. Do not trust vital data to it.. when it dies you will have issues recovering it.
4. Yes, all apple routers will function as wireless extenders. when you do that the ethernet ports turn off so it becomes a purely wireless device.. strange apple decision on what you want to use your TC for. -
For about three weeks I haven't been able to download any apps, not even the free ones. My apple id billing information says that my security code on the back of my credit card is invalid. I called apple support and they told me to go to the express lane website but I still cant find a fix for my problem. If you could help me out that would be superb!!!!
Is the address on your iTunes account exactly the same (format and spacing etc) as on your credit card bill : http://support.apple.com/kb/TS1646 ? If it is then you could try what it says at the bottom of that page :
If the issue persists, contact your credit card company and verify that they and any company they use to process credit card authorisations have the correct information on file.
And/or try contacting iTunes support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page -
This script is not checking the existing of the new created item
Dear Friends
I have This script is not checking the existing of the new created item I am using this script in side WHEN-BUTTON-PRESSED trigger
I am using oracle Forms [32 Bit] Version 6.0.8.11.3 (Production)
My script as the following :
BEGIN
BEGIN
SELECT ITEM_CODE INTO :GLOBAL.DUMMY
FROM IM_INVENTORY
WHERE ITEM_CLASS = TO_NUMBER(RTRIM(LTRIM(:IM_NEW_ITEMS.ITEM_CLASS)))
AND ITEM_TYPE = TO_NUMBER(RTRIM(LTRIM(:IM_NEW_ITEMS.ITEM_TYPE)))
AND ITEM_LENGTH = :IM_NEW_ITEMS.ITEM_LENGTH
AND ITEM_WIDTH = :IM_NEW_ITEMS.ITEM_WIDTH
AND ITEM_HIGHT1 = :IM_NEW_ITEMS.ITEM_HIGHT1
AND ITEM_HIGHT2 = :IM_NEW_ITEMS.ITEM_HIGHT2
AND COLOR_CODE = TO_NUMBER(RTRIM(LTRIM(:IM_NEW_ITEMS.COLOR_CODE)))
AND SHAPE_CODE = TO_NUMBER(RTRIM(LTRIM(:IM_NEW_ITEMS.SHAPE_CODE)));
-- get_err_message(87);
SHOW_MESSAGE('This Item Already Exist !!!');
RAISE FORM_TRIGGER_FAILURE;
EXCEPTION
WHEN NO_DATA_FOUND THEN
show_message('here');
INSERT INTO IM_INVENTORY
(ITEM_CODE,ITEM_NAME_A,ITEM_NAME_E,STOCK_ITEM,ITEM_CLASS,ITEM_TYPE,SUPP_CODE,ITEM_LENGTH,ITEM_WIDTH,
ITEM_HIGHT1,ITEM_HIGHT2,COLOR_CODE,SHAPE_CODE,ITEM_SIZE_TYPE,VOLUME,CON_FACTOR,ITEM_PRICE1,
ITEM_DISCOUNT,MIN_QTY,MAX_QTY,COSTING_METHOD,ITEM_COST,STANDARD_COST,WEIGHT,ITEM_PRICE2,ITEM_PRICE3,
OPENING_COST,LAST_PUR_COST,QTY_FOR_PRICE2,QTY_FOR_PRICE3,ITEM_PRICE_METHOD,USER_ID,USER_DATE)
VALUES(:IM_NEW_ITEMS.ITEM_CODE,:GLOBAL.LOC_VAR_A,:GLOBAL.LOC_VAR_E,'1',:IM_NEW_ITEMS.ITEM_CLASS,:IM_NEW_ITEMS.ITEM_TYPE,'0',
:IM_NEW_ITEMS.ITEM_LENGTH,:IM_NEW_ITEMS.ITEM_WIDTH,:IM_NEW_ITEMS.ITEM_HIGHT1,:IM_NEW_ITEMS.ITEM_HIGHT2,
NVL(:IM_NEW_ITEMS.COLOR_CODE,0),NVL(:IM_NEW_ITEMS.SHAPE_CODE,0),1,NVL(:IM_NEW_ITEMS.VOLUME,0),1,:GLOBAL.ITEM_PRICE1,0.00,0.00,0.00,'1',0.00,0.00,
0.00,:GLOBAL.ITEM_PRICE1,:GLOBAL.ITEM_PRICE1,0.000,0.000,0.000,0.000,1,:IM_NEW_ITEMS.USER_ID,:IM_NEW_ITEMS.USER_DATE);
standard.commit; -- NEW COMMITED
clear_message; -- NEW COMMITED
WHEN FORM_TRIGGER_FAILURE THEN
SHOW_MESSAGE('Error : '||SQLERRM);
RAISE FORM_TRIGGER_FAILURE ;
WHEN OTHERS THEN
SHOW_MESSAGE('Error : '||SQLERRM);
RAISE FORM_TRIGGER_FAILURE ;
END;
END;
Waiting for your valuable answer .
Best regards
Jamil AlshaibaniHi,
I have written the script also with constants values but still it is not going to
SHOW_MESSAGE('This Item Already Exist !!!');
and the script is written as the following :
BEGIN
SELECT 1 INTO :GLOBAL.DUMMY
FROM IM_INVENTORY
WHERE ITEM_CLASS ='110'
AND ITEM_TYPE ='110105'
AND ITEM_LENGTH = 1
AND ITEM_WIDTH = 1
AND ITEM_HIGHT1 = 1
AND ITEM_HIGHT2 = 0
AND COLOR_CODE = '3001'
AND SHAPE_CODE = '201' ;
SHOW_MESSAGE('1- This Item Already Exist !!!');
RAISE FORM_TRIGGER_FAILURE;
EXCEPTION
WHEN NO_DATA_FOUND THEN
show_message('here');
INSERT INTO IM_INVENTORY
(ITEM_CODE,ITEM_NAME_A,ITEM_NAME_E,STOCK_ITEM,ITEM_CLASS,ITEM_TYPE,SUPP_CODE,ITEM_LENGTH,ITEM_WIDTH,
ITEM_HIGHT1,ITEM_HIGHT2,COLOR_CODE,SHAPE_CODE,ITEM_SIZE_TYPE,VOLUME,CON_FACTOR,ITEM_PRICE1,
ITEM_DISCOUNT,MIN_QTY,MAX_QTY,COSTING_METHOD,ITEM_COST,STANDARD_COST,WEIGHT,ITEM_PRICE2,ITEM_PRICE3,
OPENING_COST,LAST_PUR_COST,QTY_FOR_PRICE2,QTY_FOR_PRICE3,ITEM_PRICE_METHOD,USER_ID,USER_DATE)
VALUES(:IM_NEW_ITEMS.ITEM_CODE,:GLOBAL.LOC_VAR_A,:GLOBAL.LOC_VAR_E,'1',:IM_NEW_ITEMS.ITEM_CLASS,:IM_NEW_ITEMS.ITEM_TYPE,'0',
:IM_NEW_ITEMS.ITEM_LENGTH,:IM_NEW_ITEMS.ITEM_WIDTH,:IM_NEW_ITEMS.ITEM_HIGHT1,:IM_NEW_ITEMS.ITEM_HIGHT2,
NVL(:IM_NEW_ITEMS.COLOR_CODE,0),NVL(:IM_NEW_ITEMS.SHAPE_CODE,0),1,NVL(:IM_NEW_ITEMS.VOLUME,0),1,:GLOBAL.ITEM_PRICE1,0.00,0.00,0.00,'1',0.00,0.00,
0.00,:GLOBAL.ITEM_PRICE1,:GLOBAL.ITEM_PRICE1,0.000,0.000,0.000,0.000,1,:IM_NEW_ITEMS.USER_ID,:IM_NEW_ITEMS.USER_DATE);
standard.commit; -- NEW COMMITED
clear_message; -- NEW COMMITED
WHEN FORM_TRIGGER_FAILURE THEN
SHOW_MESSAGE('Error : '||SQLERRM);
RAISE FORM_TRIGGER_FAILURE ;
WHEN OTHERS THEN
SHOW_MESSAGE('Error : '||SQLERRM);
RAISE FORM_TRIGGER_FAILURE ;
END;
Best regards
Jamil -
Flash play installation not work - The exe file deelete automaticly and the process is still running
Flash play installation not work - The exe file deelete automaticly and the process is still running
Why i get no answer?
-
Three keys of my keyboard are not working, the cap one, the return key and the space bar, while the virtual keyboard shows to others keys highlighted in orange (^ and `); How to fix it? I writing now with a bluetooth keyboard.
All new keyboards need Snow Leopard 10.6.8 and above for full functionality.
Rather short-sighted of Apple perhaps, but that seems to be a trend these days.
I'm afraid the only fix is to upgrade to SL. Personaly, I'd take it back and get a refund and seek an older keyboard or a third-party one elsewhere.
Maybe you are looking for
-
Help me please! I can't get my music back
Well one day i was restoring my entire computer and i deleted my itunes.( i forgot to back it up =/) Then i went on vacation and somehow my iPods touch screen no longer worked so i took it back to the store and they gave me a refurbished one. Now i d
-
I saw a question posted from someone on June 17 about logging into SQl Plus,, although it was for the 9i version and I wanted to know if it was the same user name,password,host string for Oracle 8i? The default settings you gave to (Bill)? Thanks Mar
-
MSI HD 7850 1GB GDDR5 OC edition Fan speed problem
Hello all. I have some strange issue with my graphic card and fan i think. I have noticed that, when my monitor goes to sleep (or when I manually turn off), after few minutes (7-8-9-10) I can loudly hear GPU fan acceleration. And it happens every few
-
Running OS command using DBMS_PIPE
Hi, I have reproduce the exemple in the documentation DBMS_PIPE - Example 3: Execute System Commands using the proc daemon.pc. It works, the commands are getting executed, but I have no control over them. What I need is for the calling PL/SQL functio
-
Rollover text and images in Captivate CS4
Hi All, I am trying to create a rollover image and rollover caption that both appear at the same time when I move over a particular area of my slide. In my example below i want to rollover the arm of the body and have the text and the image appear a