Patch No for Upgrading Database XE

Hii All,
I need to patch My Oracle Express edition(10.1.0.2) to 10.1.0.4 also in my one system
and in another ystem I need to patch 11.1.0.6.0 to 11.1.0.7.0 ,which is a prerequiste for installing OracleSOA 11g toolset.
Can anyone plz tell me what are the exact patch no I need to down load for each case?.
Thanks and regards,
Deekay.

Patches are available only when you paid for a support access to metalink, and for the non-free editions.
Oracle XE is a free version of Oracle database 10.2.0.1.
Since it is licence free, you are free to use for whatever you want, however, there is no patches available for this Oracle Edition.
Regarding your 11g upgrade, again, you have to access to metalink (tab "Patches & Updates") and look for the target patchset you want to go to. Patchset depends of your plateform, help yourself.
Nicolas.

Similar Messages

Current Patch Set for Oracle Database Release 11.2

Hi
I am upgrading oracle 10G to 11GR2 in AIX 5.3 Environment with SAP ECC6 , I have just just installled Oracle 11.2.0.1.0 according to the "Database Upgrade Guide -Upgrade to Oracle Database 11g Release 2 (11.2): UNIX". After database software installation , in upgrade manual in section 3.4.4 it says, you need to install current patch set for oracle database 11g R2 and referencing a SAP note 1431799.
I have just read note 1431799 which says Current Patch Set for Oracle Database Release 11.2 is not generally available for SAP customers until December 2010, also I donu2019t find the note 1522330 as mentioned in 1431799.
Please let me know how I can get current patch set to apply with Oracle 11.2.0.1.0 (Is it in SAP service market place?)
I also want to upgrade my installation to oracle 11.2.0.2, please let me know where I get the patch set to upgrade from 11.2.0.1.0 to 11.2.0.2,
or
I have to live with 11.2.0.1.0 and apply SAP Bundle Patch ( SBP)

Abu Al MAmun,
I understand from your posts that you recently upgraded to 11.2.0.2.
I am having the same difficulty, of finding the current patch set for 11.2. Could you please let me know how you worked around it?
Thanks,
Siri
Hello Everyone,
I did read the post on to how you have to install the current patch set for 11.2.
But honestly, it pretty much flew over my head.
I am trying to upgrade our SAP AIX 64 bit test system from Oracle 10.2.0.4 to 11.2.0.2.
And so far I have downloaded all the required sw for the upgrade, except for the current patch set 11.2.
This is what I have right now:
1) Oracle 11.2 AIX 64 bit upgrade sw - 51038805_part 1 to 51038805_part 7 and 51039800.
2) Database Patches -->Oracle 11.2.0.2 -->
All they have here is
a. Database RDMBS - SAP_112020_201012_AIX.zip and b. SAP_112020_201101_AIX.zip
b. OPatch - OPatch_11201_Generic_v3.zip and mopatch-2_1_6.zip
c. Database Vault - DV - >Generic - p9656644_112020_Generic.zip
If I am not wrong, the Database RDBMS files are nothing but the SAP Bundle Patches that have to be installed after installing the currrent patch set 11.2.0.2 using MOPatch.
But I did not find the currrent patch set 11.2.0.2.
Could someone please explain the process to me in detail? This being my first time , I am finding it a bit hard to catch up with some of the stuff.
Thank You!
Siri

Patch number for upgrading opatch from 10.2.0.1.0 to 10.2.0.1.1

Please can someone tell me what is the Patch number for upgrading opatch utility from 10.2.0.1.0 to 10.2.0.1.1?
Thanks in advance.

Sami,
Why don't you use the latest version of opatch (Patch 4898608 - OPatch 10.2.0.1.6)?

Oracle Critical Patch Update for Oracle Database 10g Release 10.2.0.3.0

Hi,
The [ Oracle Critical Patch Update for April 2012 was released on April 17th, 2012|http://www.oracle.com/technetwork/topics/security/cpuapr2012-366314.html] , wherein it was stated that below list versions will get affected.
Oracle Database 10g Release 2, versions 10.2.0.3, 10.2.0.4, 10.2.0.5
Currently I am using
BANNER
Oracle Database 10g Release 10.2.0.3.0 - 64bit Production
Can anyone tell me, difference between
Oracle Database 10g Release 2, versions 10.2.0.3 with Oracle Database 10g Release 10.2.0.3.0
I am much concerned whether to apply patch for 10.2.0.3.0, wherein the affected version is Oracle Database 10g Release 2, versions 10.2.0.3
Thanks,
Sam

user12983673 wrote:
Can anyone tell me, difference between
Oracle Database 10g Release 2, versions 10.2.0.3 with Oracle Database 10g Release 10.2.0.3.0There is no difference -- you use version 10.2.0.3 which is affected by last CPU.

Need patch number to Upgrade database

I am trying to upgrade our 10.2.0.1.0 database to 10.2.0.3.0. Does anyone know the patch number? We are on Sun Solaris 10 x86 32 bit platform.

Hi,
Oracle 10g Support will expire soon, I suggest you to upgrade to 11.2.0.1, if ist not possible to upgrade to 11gR2 it is recommended to upgrade to 10.2.0.5 patchset.
Regards,
X A H E E R

Exp/imp for upgrading database

Hi, Is it a good idea to use exp / imp to upgrade a database from 9i to 11g.To overcome parallel I plan to set ll tables degree to 8 manually and then start the export.Which is better conventional upgrade or exp/imp

HI,
Please check Oracle support id : How to Perform a Full Database Export Import during Upgrade, Migrate, Copy, or Move of a Database (Doc ID 286775.1)
Thank you

Patch set for 11g database.

From where can I download the patchset for oracle 11g database?
Regards,
Atif Iqbal

Any patchset for 11g release 1/2You can download 11gR2 (11.2.0.2.0/11.2.0.1.0) or 11gR1 (11.1.0.7.0/11.1.0.6.0) directly from http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html and you do not need to apply any patchset on top of it.
and also the meta notes access.Since you do not have a CSI number, I believe this will not be helpful -- We cannot post the contents of MOS (Metalink) docs since this violates Oracle support agreement policy.
Thanks,
Hussein

AIX - patch release for 10gR2

All,
anybody can let me know what is the current patch release available for oracle 10gR2 in AIX 5L . I believe it is 10.2.0.4 on solaris .
thanks in advance.

Any reason you cannot do a search for yourself on My Oracle Support ? ;-)
Here is what I found
6810189 - 10.2.0.4.0 PATCH SET FOR ORACLE DATABASE SERVER IBM AIX Based Systems (64-bit)
7612639 - 10.2.0.4 GENERIC RECOMMENDED BUNDLE# 3
HTH
Srini

Oracle 11.1.0.6 RDBMS Upgrade to 11.2 What Patch Number for Linux?

I have Oracle RDBMS 11.1.0.6 on 64bit Linux two node RAC and trying to find out what is the patch number to upgrade the database to R2. Thanks

yakub21 wrote:
I have Oracle RDBMS 11.1.0.6 on 64bit Linux two node RAC and trying to find out what is the patch number to upgrade the database to R2. ThanksYakub,
Patches are only used within a release. 11.2 is '11g Release 2' - a new release. This is no longer a patch, it is an upgrade.
You perform the upgrade as per the Upgrade manual in the doc set. PLEASE read that manual before you attempt te upgrade. There are a few steps and concepts that are significantly different from a patch.
The starting point for an upgrade is the freely downloaded s/w. The software is a completely fresh install, but the database gets upgraded.
By the way, I would not recommend jumping on 11.2 for an existing production environment until a careful evaluation has been made - upgrades always introduce significant changes and they could adversely affect an existing application is not properly tested and understood. Budget a few weeks (at least) to understand the differences.

Patch for upgrading 10g AS from 10.1.2.0.2 to 10.1.2.1

Hi All,
I am in process of doing 10g AS integration with 11.5.10.2.
here as per documentation i have seen that this 10g AS has to upgrade
My 10g AS version is 10.1.2.0.2
The below msg is as per Oracle Documentation
If you are running Oracle Application Server 10g Release 2 (10.1.2.0.0) or Oracle Application Server 10g Release 2 (10.1.2.0.1) Standard Edition One, then apply the Oracle Application Server 10.1.2.1 patch before applying Oracle Application Server Portal Upgrade.
I have searched a lot in metalink for patch but no luck
So please let me know the right patch to upgrade my 10g AS from 10.1.2.0.2 to 10.1.2.1
Also any supporting document for this upgrade
Thanks in advance
Regards,
Bhanu Chander.

I have downloaded patch p5983622_10123_LINUX.zip
and first tried to upgrade infrastructure home
but while upgrading it says
oracle universal installer has detected that your database is version 10.1.0.4.2 before you can continue you must apply a required database patch set.
But in documentation i have seen
Supported Database Releases
The portal schema may be residing in an OracleAS Metadata Repository, or in a customer database. The database in which the portal schema resides must be one of the following supported releases:
Oracle Database 10g (10.1.0.4.2) or later
Please let me know what should i do now
Thanks in advance
Regards,
Bhanu Chander.yes, because the Infrastructure Database needs to be upgraded. And it is listed in the documentation of the same patch set.
In the Readme file for the patch set 3 (5983622 or p5983622_10123_LINUX) as you mentioned, please see Section 5. Before you begin applying this patch set
It reads the following:
"5.6 Applying the Oracle Database 10g Release 1 (10.1.0.5) Patch Set
The Oracle Database 10g Release 1 (10.1.0.5) patch set must be applied to all database instances (for both the Identity Management and Metadata Repository installation type and Metadata Repository only installation type) before applying OracleAS 10g Release 2 Patch Set 3. If OracleAS 10g Patch Set 2 (10.1.2.2.0) has been applied previously, then you do not have to apply the database patch."
hope that explains what you need to do. i.e, your infra DB version is 10.1.0.4.2 and needs to be upgraded to 10.1.0.5.
AMN

Database patch 5 for CM

Hi all,
After succesfully installing EP SP2 with patch 29 and CM patch 4 too after that, I wanted to upgrade CM to the last patch too.
I first deployed patch 5 for CM, succesful operation, but after that the documentation guide showed to apply the patch 5 for database (included in this CM patch)
During the patching of oracle instance I had the following error:
DROP INDEX "IX_CMCC_TABLE1"
ORA-01418: specified index does not exist
followed by exception.
I have a look on oracle errors, but dont know how to solve it.
Can someone help me solving this, because I havent done a backup to my database, but only to the instance used.
When I logon in the portal after that in the KM Content it gives an exception saying is waiting for a patch.
Best regards,
Raluca.

Hi,
I am having the same problem.
Did you maybe find a solution for this?

Mandatory Patches for upgrade

We are in process for upgrading 8.1.7.4 (32 bit) to 10.2.0.4 (64 bit) on AIX . We downloaded so far Base 10.2.0.1 and patchset 10.2.0.4 plus latest CPU patch. Does anybody knows if any Oracle recommended Mandatory Patches out there so we could apply before database upgrade.
Thanks.

I end up opening TAR with Oracle and they send me steps on how to find list of Recommended Patches.
Now to find the recommended patches on 10.2.0.4.0 do the following
1. Log into metalink.
2. Click on the tab patches and updates
3. Click on the link "Oracle Database" under "Recommended Patches"
4. Select the release as "10.2.0.4.0" and platform as "IBM AIX Based Systems (64-bit)"
5. Click on GO. This will list you the recommended patches.

In-place upgrade of Enterprise Manager for RAC databases is not supported

upgrading 2 node RAC from 10.2.0.1 to 10.2.0.3 on Windows 2003 64 bit. I got the following:
In-place upgrade of Enterprise Manager for RAC databases is not supported in this release
Now I cannot log in to the database control as sys with sysdba role . I get "invalid username/password" error
I can login as a dba user
I also get a java error after I log in, some thing about class not found, but then I'm in and I can do everything that I try, although I haven't tried scheduling a backup yet
Can I upgrade EM to 10.2.0.3?
If so, how?

On the patchset readme...
11.3 Upgrade of Oracle Enterprise Manager Not Supported
When you start Oracle Database Upgrade Assistant to upgrade 10.2.0.1 database to 10.2.0.3 patch set, the following error occurs:
Inplace upgrade of Enterprise Manager is not supported for RAC databases is not supported in this release
Workaround:
Ignore warning.
If you drop and recreate the EM repository?
1). emca -deconfig dbcontrol db repos drop
2). emca -config dbcontrol db -repos create
Be careful, doing this put the database on QUIESCE mode.
Regards,
Rodrigo Mufalani

O/S Patch, H/W, S/W Upgrades, Database upgrades, patches - Exadata Platform

Platform: SUN ODM
Topic: Patching/Upgrades
I would like to know various available options that we can use to do.
1. H/W Upgrades
2. Patch Upgrades
3. S/W, Database upgrades/patching, Hot/Online patching
Because its a RAC envt, we have an option of doing node-by-node upgrades but will be interested in knowing best practices. (recommended by Oracle)

user1175306 wrote:
Platform: SUN ODM
Topic: Patching/Upgrades
I would like to know various available options that we can use to do.
1. H/W Upgrades HW is fixed, there are no options to add or upgrade components in the individual servers.
2. Patch UpgradesPatches for Exadata software are available via My Oracle Support. The installation procedures for each Exadata software upgrade are detailed in the patch's readme.
3. S/W, Database upgrades/patching, Hot/Online patchingMost patches are rolling-installable and most Exadata software upgrades are rolling-installable too. You should utilize the MAA best practices and whitepapers that describe how to minimize downtime for patching and upgrades via Data Guard and other techniques (http://www.oracle.com/technology/deploy/availability/htdocs/maa.htm)
>
Because its a RAC envt, we have an option of doing node-by-node upgrades but will be interested in knowing best practices. (recommended by Oracle)

Error when installing 9.0.1.4.0 patch set for the Oracle Database Server.

Hi to all.
Currently, i am trying to install patches for portal server.
The server OS is Sun Solaris 8.
We are using Oracle9iAS.
Now, we are installing 9.0.1.4.0 patch set for the Oracle Database Server.
We managed to install the patch, but have problem with the Post Install Action.
We managed to run
-ALTER SYSTEM ENABLE RESTRICTED SESSION;
-@rdbms/admin/catpatch.sql
-ALTER SYSTEM DISABLE RESTRICTED SESSION;
-CONNECT / AS SYSDBA
-update obj$ set status=5 where type#=29 and owner#!=0;
-commit;
But, when we come to the next command, which is to shutdown, it gives us like
this..
SQL> update obj$ set status=5 where type#=29 and owner#!=0;
1402 rows updated.
SQL> commit;
Commit complete.
SQL> shutdown immediate
Database closed.
Database dismounted.
ORA-00604: error occurred at recursive SQL level 1
ORA-01219: database not open: queries allowed on fixed tables/views only
We tried to startup the database..it gives us this error..
SQL> startup
ORA-01081: cannot start already-running ORACLE - shut it down first
So, we tried to shutdown again..
SQL> shutdown immediate
ORA-01089: immediate shutdown in progress - no operations are permitted
I been informed that this is maybe a Database problem related. Any ideas?
Best Wishes,
Rushdan Md Saad.

Patchsets could be obtained (only) from http://metalink.oracle.com
You need to have valid CSI for access.
P.S: Sorry Werner, I didn't see you post.
Message was edited by:
Ivan Kartik

Patch No for Upgrading Database XE

Similar Messages

Maybe you are looking for