Patching dual stacks ABAP + JAVA simultaneously
Hi,
I would like to know if I can patch ABAP and JAVA on a dual stack system at the same time. According to the patching document I can run an SGEN when the JSPM is running but it does not tell me why I can not patch a dual stack system simultaneously. I have discovered that the JSPM restarts the dispatcher in order to update itself. After this initial step the ABAP stack should remain available providing the kernel has been manually updated.
Does anyone have any advice on this?
Thanks,
James
Hi,
I had a similar case where I had to install a java stack for an already existing CRM system running on Windows/SQL Server.
I installed a different SID for Java on the same host and I installed the Java database as a second database in the same SQL server engine.
Therefore I shared the hardware resources but still had 2 separate stacks as best practice.
Regards,
Olivier
Similar Messages
-
ChaRM for Dual Stack ABAP & JAVA - No http port for system SPD
Hi,
I have configured the CHARM for Dual stack ( Java, ABAP). when I perform the action 'Logon to System' it gives me following option
" The system is a dual stack system. You can log
on to the ABAP stack or non-ABAP stack
To which stack do you want to log on?
ABAP or Non ABAP"
If I click on Non ABAP, one more message comes
"You can logon to system SPD or just display its
transport requests
What do you want to run?
Requests Or Logon"
If I click on Logon I get the Information " No http port for system SPD "
& If I click Continue It will take me to Ugent Correction & error appears as 'Action System Logon in system SPD 100 of type Source Systems has been cancelled'
How to Solve this error.
Regards
PK
Edited by: PK on Sep 1, 2010 5:59 AMIts possible to login to portals(non-ABAP systems).
Please check.
http://wiki.sdn.sap.com/wiki/display/SMSETUP/Initial+Configuration
Pl. make sure SLD for the Java stacks are defined correctly.
regards,
Arun. -
Hi All,
I am trying to install the NW 7.3 as Abap+Java stack, But I could not find any option to install as dual stack.
If any one Know the solution, please inform to me.
Thank you very much in Advance.
Regards,
Amar.> But you can install PI, and then deploy all the other SCAs with JSPM.
...and on the first upgrade/EHP installation the system will be hosed because the tools don't support dual stacks.
Markus -
Whats the difference between ABAP stack, ABAP+Java stack and Java stack
Hello,
I have a nagging doubt about the difference between the ABAP stack, ABAP+Java stack & the Java only stack. I believe that the method of applying the kernel for all the 3 types is different.
Also can we apply the ABAP support packs through JSPM.
Please put some light on this.
Thank youHi Zaheer
ABAP Stack
AS ABAP is used to provide the ABAP foundation of SAP NetWeaver.
Part of AS ABAP is the Search Engine Service (SES), which enables users to search for
business objects using Search and Classification (TREX). SES accesses Search and
Classification (TREX) functions through the Search and Classification (TREX) ABAP
client. SES replicates the business objects from the ABAP application to Search and
Classification (TREX), so that it can apply Search and Classification (TREX) search
functions to them. When a user enters a search query, the Search and Classification
(TREX) system responds to it, not the database for the ABAP application. For more
information, see the document Installation Guide SAP NetWeaver TREX Single Hosts /
Multiple Host.
Java stack
AS Java is used to provide the Java foundation of SAP NetWeaver. Among the key
capabilities of AS Java are:
J2EE Engine a J2EE 1.3-compliant application server for running enterprise
applications. In addition to the pure J2EE standard technologies, the J2EE
Engine implements complementary technologies, such as Web Dynpro or Web
Services, that are targeted at supporting large-scale, real-business application
development projects.
SAP Composite Application Framework Core (CAF Core) is a service-oriented
architecture for building and deploying composite applications. It enables
modeling of different service types entity services that represent a domain
model, application services that implement business logic, and external
services that offer connectivity to back-end services by means of remote
function calls (RFCs) or Web services. Usage type AS Java comprises the CAF
Core runtime environment, while design time tools are part of the SAP
NetWeaver Developer Studio.
Web Dynpro is the user interface technology for developing professional
business applications for mobile as well as for desktop clients. Web Dynpro
applications can easily be integrated into SAP NetWeaver Enterprise Portal,
providing a unified layout for the end user as well as enhanced navigation
support. Web Dynpro also allows, for example, the development of interactive
forms using the Adobe document services.
Adobe document services is a set of runtime services that provide a range of
form and document creation and manipulation functions such as:
Converting XML form templates (created using Adobe LiveCycle Designer)
to PDF and various print formats
Setting Adobe Reader rights to enable users to fill in and annotate forms,
save and print them locally, and include digital signatures for authentication
using the free Adobe Reader software
Extracting data from SAP applications into Interactive Forms and transferring form data
back into SAP applications using XML
ABAP + Java Stack
Contains both functionalities.
I hope this helps
Regards
Chen -
Any advice / guide on how to create separate Stack ABAP + JAVA for CTS+
Hello Experts,
Can you please point me to the how to guide for creation of separate Stacks ABAP + JAVA for CTS+ Transport Management.
Also can you please clarify how I can convert STMS Virtual systems in to Real systems? Any guidance for this?
Thank youHello,
You should have a look at the installation guide.
http://service.sap.com/instguides -> SAP Components -> SAP Solution Manager -> Release XXX
For instance :
http://service.sap.com/instguides -> SAP Components -> SAP Solution Manager -> Release 7.0 EHP 1
Then have a look at section 4.2 Installation Checklist u2014 Java Add-In
It covers:
Java Add-In for an existing central ABAP system
Java Add-In for an existing distributed ABAP system
Java Add-In for an existing High-Availability ABAP system
ABAP+Java Dialog instance
Regards,
Paul -
Hello,
we want to apply a new SP stack to a NW2004s (ECC 6.0) - dual stack (Java/ABAP) with PI(XI).
The ABAP stack is sucessfully patched yet,
but the Java stack needs still to be patched!
In the SPS guide for SPS 9 and some OSS notes you can read that during the patching of the Java stack, the whole system (ABAP and Java engine) are restarted several times. But the JSPM should ask you before the restart.
Do you have experiences how long the patching of the Java stack will take (downtime)?
How often needs the system to be restarted?
Is it possible to work with the ABAP engine (ABAP development, etc.) during the installation of the Java SPS with JSPM until the system needs to be restarted?
How is it possible to minimize the downtime of the system during the Java SPS installation?
Thanks in advance!
Best regards,
StephanHi Stephan,
"Do you have experiences how long the patching of the Java stack will take (downtime)?"
I believe this is most highly dependent on the hardware. Although some patches will deploy more objects than others, the deploy time is shorter on better/faster hardware. I applied SP9 on my laptop PC (java only, no ABAP stack) and it took a few hours total -- including my processing and error correcting time. My laptop has only 2 GB RAM so this process was greatly slowed by the amount of available memory (I was running other applications, like Outlook, etc.) resulting in a lot of disk swapping.
"How often needs the system to be restarted?"
Again, I have a java only installation, no ABAP, but I believe there was only 1-2 system restarts. The system had to be restarted after the application of the java kernel part of the patch, then shutdown and restarted again for the offline deployment phase. I cannot remember if there was a restart after the online deployment phase.
"Is it possible to work with the ABAP engine (ABAP development, etc.) during the installation of the Java SPS with JSPM until the system needs to be restarted?"
Yes.
"How is it possible to minimize the downtime of the system during the Java SPS installation?"
I think the best way is to have the best hardware! Also, be sure to be thoroughly prepared by reading the guide, all of the Notes, etc. I was slowed by a previously correctable error (my administrator password had been previously changed and I had not changed it in the secure store -- Note 701654).
Best Regards,
Matt -
Restart the Java-Engine in a dual stack installation (java+abap)
Hi,
how is it possible to restart or start only the j2ee-engine in a dual stack installation. We have a JAVA- and a ABAP-Stack and want only restart the JAVA-Stack. In windows i can use the MMC of SAP but how is it possible in UNIX.
regards,
sharamHi Eric,
i konw this TR, it doesn't work. There are two possibilities:
restart j2ee-local
restart j2ee-global
we try it with j2ee-local because we use a dual stack installation. What could be the problem. Is there an other possibility? How can i restart the j2ee-engine directly on my unix machine?
regards,
sharam -
Error in phase import Homogeneous system copy from a BI 7.3 dual stack ABAPJAVA
Hi
I'm doing a Homogeneous system copy from a BI 7.3 dual stack ABAP+JAVA system with an Oracle DB (11g version, 11.2.0.3.0 patch level) with AIX ibm OS.
Before starting export I've executed in the source system the report SMIGR_CREATE_DDL, as described in sap note 888210, and I generated *.SQL files.
After, during the import in the target system I get the following error message:
vi /expdb2/tmpDB0/sapinst_instdir/NW730/ORA/ORA/COPY/ORA/SYSTEM/STD/AS/import_monitor.log
INFO: 2014-03-08 00:21:57 com.sap.inst.migmon.LoadTask run_report
Monitor jobs: running 0, waiting 1, completed 60, failed 5, total 66 finish processing of package SAP0000
You can see below the detail of the 5 packages in error:
SAPAPPL0_1_5
DbSlExecute: rc = 99
(SQL error 2216)
error message returned by DbSl:
ORA-02216: tablespace name expected
(DB) INFO: disconnected from DB
/usr/sap/DB2/SYS/exe/uc/rs6000_64/R3load: job finished with 1 error(s)
/usr/sap/DB2/SYS/exe/uc/rs6000_64/R3load: END OF LOG: 20140307141347
SAPZPSA
DbSlExecute: rc = 99
(SQL error 2216)
error message returned by DbSl:
ORA-02216: tablespace name expected
(DB) INFO: disconnected from DB
SAPDODS
DbSlExecute: rc = 99
(SQL error 922)
error message returned by DbSl:
ORA-00922: missing or invalid option
(DB) INFO: disconnected from DB
SAPDFACT
DbSl Trace: Error 1741 in exec_immediate() from oci_execute_stmt(), orpc=0
DbSl Trace: ORA-01741 occurred when executing SQL stmt (parse error offset=8126464)
(DB) ERROR: DDL statement failed
( ALTER TABLE "/BI0/F0TCT_C01" ADD PARTITION "/BI0/F0TCT_C010000001131" VALUES LESS THAN ( 0000001131 ) TABLESPACE "" )
DbSlExecute: rc = 99
(SQL error 1741)
error message returned by DbSl:
ORA-01741: illegal zero-length identifier
(DB) INFO: disconnected from DB
SAPZOSO
DbSl Trace: Error 922 in exec_immediate() from oci_execute_stmt(), orpc=0
DbSl Trace: ORA-00922 occurred when executing SQL stmt (parse error offset=242024448)
(DB) ERROR: DDL statement failed
(CREATE TABLE "/BIC/B0000989000" ("REQUEST" VARCHAR2 (000090) DEFAULT ' ' NOT NULL, "DATAPAKID" VARCHAR2 (000018) DEFAULT '000000' NOT NULL, "PART
NO" NUMBER (000010) DEFAULT 0 NOT NULL, "RECORD" NUMBER (000010) DEFAULT 0 NOT NULL, "PLANT" VARCHAR2 (000012) DEFAULT ' ' NOT NULL, "MATERIA
L" VARCHAR2 (000054) DEFAULT ' ' NOT NULL, "RPA_CURUOM" VARCHAR2 (000015) DEFAULT ' ' NOT NULL, "RPA_MVF" NUMBER (000017, 000002) DEFAULT 0 NOT N
ULL, "PRICE_UNIT" NUMBER (000017, 000003) DEFAULT 0 NOT NULL, "RPA_QTYUOM" VARCHAR2 (000009) DEFAULT ' ' NOT NULL, "RT_SSMFGR" VARCHAR2 (000024)
DEFAULT '00000000' NOT NULL, "BASE_UOM" VARCHAR2 (000009) DEFAULT ' ' NOT NULL, "FRE_PLNPUR" VARCHAR2 (000036) DEFAULT ' ' NOT NULL, "FRE_MINS
TK" NUMBER (000017, 000003) DEFAULT 0 NOT NULL, "FRE_SERLEV" NUMBER (000017, 000003) DEFAULT 0 NOT NULL, "FRE_SELCLS" VARCHAR2 (000003) DEFAULT '
0' NOT NULL, "FRE_REPLST" VARCHAR2 (000006) DEFAULT ' ' NOT NULL, "ABCKEY" VARCHAR2 (000003) DEFAULT ' ' NOT NULL, "RECORDMODE" VARCHAR2 (000003)
DEFAULT ' ' NOT NULL, "RT_SERVLEV" VARCHAR2 (000003) DEFAULT ' ' NOT NULL, "RT_SUPS" VARCHAR2 (000003) DEFAULT ' ' NOT NULL, "VAL_TYPE" VARCH
AR2 (000030) DEFAULT ' ' NOT NULL, "PUR_GROUP" VARCHAR2 (000009) DEFAULT ' ' NOT NULL, "RT_VPNEU" NUMBER (000017, 000002) DEFAULT 0 NOT NULL,
"CURRENCY" VARCHAR2 (000015) DEFAULT ' ' NOT NULL, "RT_VRKPE" NUMBER (000017, 000003) DEFAULT 0 NOT NULL, "DISMM" VARCHAR2 (000006) DEFAULT ' '
NOT NULL, "SALES_UNIT" VARCHAR2 (000009) DEFAULT ' ' NOT NULL, "RT_VP_BT" NUMBER (000017, 000002) DEFAULT 0 NOT NULL, "RT_VPE_BT" NUMBER (000017,
000003) DEFAULT 0 NOT NULL, "RT_VP_NT" NUMBER (000017, 000002) DEFAULT 0 NOT NULL, "RT_VPE_NT" NUMBER (000017, 000003) DEFAULT 0 NOT NULL, "R
T_VWAERBT" VARCHAR2 (000015) DEFAULT ' ' NOT NULL, "RT_VWAERNT" VARCHAR2 (000015) DEFAULT ' ' NOT NULL, "RT_VPMEIBT" VARCHAR2 (000009) DEFAULT '
' NOT NULL, "RT_VPMEINT" VARCHAR2 (000009) DEFAULT ' ' NOT NULL, "LOC_CURRCY" VARCHAR2 (000015) DEFAULT ' ' NOT NULL, "UNIT" VARCHAR2 (000009)
DEFAULT ' ' NOT NULL, "CM_MCATDIV" VARCHAR2 (000054) DEFAULT ' ' NOT NULL, "CM_CDT1" VARCHAR2 (000054) DEFAULT ' ' NOT NULL, "CM_CDT2" VARCHAR2
(000054) DEFAULT ' ' NOT NULL, "CM_CDT3" VARCHAR2 (000054) DEFAULT ' ' NOT NULL, "CM_CDT4" VARCHAR2 (000054) DEFAULT ' ' NOT NULL, "CM_HIEID"
VARCHAR2 (000006) DEFAULT ' ' NOT NULL, "CPSTLC" NUMBER (000017, 000002) DEFAULT 0 NOT NULL, "CPSVLC" NUMBER (000017, 000002) DEFAULT 0 NOT NULL
, "STOCK_VAL" NUMBER (000017, 000002) DEFAULT 0 NOT NULL, "STOCK_QTY" NUMBER (000017, 000003) DEFAULT 0 NOT NULL, "RT_SEASON" VARCHAR2 (000012)
DEFAULT ' ' NOT NULL, "RT_SEASYR" VARCHAR2 (000012) DEFAULT '0000' NOT NULL, "CALDAY" VARCHAR2 (000024) DEFAULT '00000000' NOT NULL, "CALWEEK"
VARCHAR2 (000018) DEFAULT '000000' NOT NULL, "RF_BNDID" VARCHAR2 (000012) DEFAULT ' ' NOT NULL, "/BIC/ZCATTR3" VARCHAR2 (000006) DEFAULT ' ' NOT
NULL, "/BIC/ZCSTYLE" VARCHAR2 (000006) DEFAULT ' ' NOT NULL, "/BIC/ZCIMAGE" VARCHAR2 (000006) DEFAULT ' ' NOT NULL, "/BIC/ZCBRNDTYP" VARCHAR2 (000
003) DEFAULT ' ' NOT NULL, "/BIC/ZCGROUPE" VARCHAR2 (000054) DEFAULT ' ' NOT NULL) PCTFREE 10 PCTUSED 00 INITRANS 001 TABLESPACE STORAGE (
INITIAL 0000000016 K NEXT 0000001024 K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0000
FREELISTS 001 FREELIST GROUPS 01) PARTITION BY RANGE ("PARTNO") ( PARTITION "/BIC/B00009890000000000002" VALUES LESS THAN (00000
00002) NOCOMPRESS ) )
DbSlExecute: rc = 99
(SQL error 922)
error message returned by DbSl:
ORA-00922: missing or invalid option
(DB) INFO: disconnected from DBhello,
Before anything update DB shared lib, R3load, R3ldctl and R3szchk in the target system. Also Check in source system if you have any tables o index missing in db02 transaction, If this system wa upgraded from a previous release please check TAORA and IAORA tables in source system and check all the tablespaces named in those tables are created in the target system.
let me know how it goes.
Regards,
Michael -
SSO within an ABAP+JAVA on the same host
Experts:
We have a dual stack (ABAP+JAVA) NW04s on the same host.
The usage type EP7 is enabled.
From this EP7 we want to access its own ITS thru SSO.
We configured the SSO just like we did for the EP7 + ECC on 2 different hosts.
However, we are always asked for an ID/password when trying to test the SSO from the EP7.
The error is:
"SSO logon not possible; browser logon ticket cannot be accepted"
Please advise. Points guaranteed. Thanks!hi,
I also tried to do the same, but i think it's not possible.
I read somewhere that SAP recommends to use different instances of ABAP and Java. I installed seperate ABAP and Java instances on the same host and then configured SSO using the Configuration Wizard in NWA configuration. and it works perfectly.
regards,
Ankur -
Question about the number of ERS instances in a dual-stack MCS environment
Hello to the group.
I have a simple question for those running a NetWeaver 7.0 (i.e. 2004s) dual stack (ABAP/JAVA) setup in an MCS environment. On each individual node, do you have two separate ERS processes running on the node (as seen in Task Manager) that is opposite to the system running the ASCS/SCS instances? If so, do you have a set of profiles for each of these ERS processes (I am guessing that is true)?
Thanks in advance for your help.
J. HaynesHas anyone found a good description of the process that runs after one node fails over to another one? help.sap.com mentions that the ASCS will restart and run the command enstatus.cmd but I cannot find what is supposed to happen after that. Is the ERS service itself stopped?
Thanks
J. Haynes -
hi guys,
we plan to upgrade Enterprise Dual stack(ABAP+JAVA) System to EHP4 system.
In EHP4 upgrade document it says, No dual stack supported for EHP4 installation..was that mean
only for Installation or upgrade too.
Seperate SID is required for EHP4 system after upgrade? Please confirm.
thankshi jaichan,
yes, you are right ..For new installation of SAP ERP to EHP4 level, you cannot install dual stack system..i have read in sap note 855534..please find below the extract from this note:
As of SAP Business Suite 7, you can no longer install Dual Stack Application Systems (ABAP+Java).
If you want to use both SAP Business Suite ABAP and Java Components in your system landscape, you have to proceed as follows:
1. Install a separate ABAP-based SAP Business Suite system.
2. Install the required Java components in a separate Java-based SAP system.
3. Configure the connection of the Java-based SAP system to the ABAP-based SAP Business Suite back-end system.
The SAP Business Suite 7 comprises: EHP4 for SAP ERP 6.0, SAP CRM 7.0, SAP SCM 7.0, SAP PLM 7.0, SAP SRM 7.0
As of now you will find the latest recommendations at a central place in SDN:
https://www.sdn.sap.com/irj/sdn/landscapedesign -> Distribution Models
You will also find information about the deployment of SAP NetWeaver usage types and the SAP Business Suite there.
but you can upgrade your previously installed SAP ERP dual stack system without having seperate SID's thing...
We have upgraded around 50 of our systems without any problem
thanks sunny -
Dear experts,
I understood PI 7.4 SP06 can be installed on dual stack ABAP+Java. If this is the case, what about ccBPM/BPM scenarios ? can support both ? only nwBPM/ccBPM ?
what about NWDS present version ?
DevaHi Deva,
In case there you are making use of Dual stack PI you CCBPM scenarios will work same as earlier dual stack PI versions. In case of Dual stack it will still be PI and not PO as PO comprises of Lone Java PI+ N/W BPM+ BRM on one system.
Also if you want to make use of N/W BPM it has to be installed seperately. Ideally you should go for lone Java if you want to make use of N/W BPM to minimise your hardware requirements.
Also NWDS version has to be less than or equal to the PI version being used.
Regards,
Sriram -
SAPINST: install IDES ECC6 EHP4 ABAP+JAVA (Windows 32 - Oracle)
Hi,
I have received the new IDES ECC6 EHP4 DVDs and I nedd to install a ABAP+JAVA instance.
It is not clear which option I have to choose in the SAPINST program.
In the past was present ERP2005 central instance. And now ?
Thank
AndreaHi Andrea,
As of SAP ERP 6.0 SR3, you must install an SAP ERP system only on 64-bit operating
systems.
For the dialog instance, you can still use a 32-bit operating system
As of SAP enhancement package 4 for SAP ERP 6.0, you can no longer install SAP
ERP dual stack (ABAP+Java) systems. If you want to use both SAP ERP ABAP and
Java Components in your system landscape, you have to proceed as follows:
1. Install a separate SAP ERP ABAP system.
2. Install a separate SAP ERP Java system.
3. Configure the connection of the SAP ERP Java system to the SAP ERP ABAP
back-end system
Hope this clarifies your concern!!!
Regards,
Rajesh -
Change IP address on ECC6 (ABAP + JAVA stack)
Hi all,
we need to change the IP address of our server running an ECC6 with double stack (ABAP & Java). Also the DB is in the same server (it's a Demo IDES system).
The computer's name will remain the same as previously.
In the HOSTS file we have updated the new IP address.
Are there some other manual corrections needed ?
Is ther something to be adapted in the J2EE admin of config ?
Thanks in advance.
AndreaHi,
I have looked into OSS note:
Note 757692 - Changing the hostname for J2EE Engine 6.407.0 installation
It is mainly related to host name than IP address.
Looking into the log file server.0.log I see:
Thread[impl:5]_51##0#0#Error#1#com.sap.engine.core.service630.container.ServiceRunner#Plain###Service com.sap.security.core.ume.service error.
Nested exception is: com.sap.engine.frame.ServiceException: <--Localization failed: ResourceBundle='com.sap.engine.frame.KernelResourceBundle',
ID='UME initialization failed.', Arguments: []--> : Can't find resource for bundle java.util.PropertyResourceBundle, key UME initialization failed.
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:372)
at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException: Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=*192.168.0.112* SYSNR=00 GWHOST=192.168.0.112 GWSERV=sapgw00 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner '192.168.0.112:sapgw00' not reached
The actual IP address il 192.168.3.128. I do not understand where the 192.168.0.112 (the previously IP addres) comes from.
May be there are some manual adjustment in Java parameters or RZ10 or SM59.
Any suggestions are welcome.
Thanks
Andrea -
Delete JAVA Stack in system with ABAP+JAVA
Hello,
A few days ago I installed a SAP ERP 6.0 SR3 with both stack: ABAP+JAVA.
But now due some things, I want to know if it is possible to delete the JAVA stack! Yesterday I did a search how to do this, how it is possible to do this, and I found a document/presentation "SAP NetWeaver 7.0 - Deinstalling Java Add-In" on the following link:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/608b079f-d0f2-2c10-62ac-a00f1b6d536f
The database of this system is a MS SQL Server 2008 (R2) and the operation system a Windows Server 2008... and as you can read in this document, it is more focused on Oracle databases, so I would ask you if this document is correct (it is official?) and if it is possible to do this in SQL Server environment, and if you know which are the manuals post installation activities for SQL Server, because all that manual post installation steps in this document is for Oracle DB!
Thank you in advance.
Kind regards,
Joao Dimas - PortugalHello Subhash.Chandra
I did the deinstallation of SAP Java Add-In, for this I followed that document which I described above. After deinstallation through sapinst, I also eliminated some directories as it is mentioned in that document, like the following directories:
DIR_GLOBAL\security\data
DIR_INSTANCE\SDM
DIR_INSTANCE\j2ee
I also delete all Java parameters in default and instance profile (like j2ee*).
So, after all, I started the ABAP instance... the system was starts, but I unfortunately the SAP MMC console show a yellow semaphore which is related with a problem disp+work.EXE, it have the following status:
Running, Message Server connection ok, Dialog Queue time: 0.00 sec, J2EE status info unavailable.
I already restarted the sap system but even so that error is shown!
I checked the dev_disp:
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid DEV
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 311
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 1456
kernel runs with dp version 247000(ext=110000) (@(#) DPLIB-INT-VERSION-247000-UC)
length of sys_adm_ext is 576 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 1456) [dpxxdisp.c 1292]
shared lib "dw_xml.dll" version 311 successfully loaded
shared lib "dw_xtc.dll" version 311 successfully loaded
shared lib "dw_stl.dll" version 311 successfully loaded
shared lib "dw_gui.dll" version 311 successfully loaded
shared lib "dw_mdm.dll" version 311 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Sun Jul 24 03:14:40 2011
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5530]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >SRVSIAPP04_DEV_00 <
DpShMCreate: sizeof(wp_adm) 29792 (1752)
DpShMCreate: sizeof(tm_adm) 5912704 (29416)
DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000011AB0050, size: 6614288)
DpShMCreate: allocated sys_adm at 0000000011AB0050
DpShMCreate: allocated wp_adm at 0000000011AB22A0
DpShMCreate: allocated tm_adm_list at 0000000011AB9700
DpShMCreate: allocated tm_adm at 0000000011AB9760
DpShMCreate: allocated wp_ca_adm at 000000001205CFE0
DpShMCreate: allocated appc_ca_adm at 0000000012062DE0
DpShMCreate: allocated comm_adm at 0000000012064D20
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 00000000120EB9B0
DpShMCreate: allocated gw_adm at 00000000120EBA30
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 00000000120EBA60
DpShMCreate: allocated wall_adm at 00000000120EBAD0
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpRqQInit: Parameter rdisp/queue_lock_level = 2
rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 8191MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 8192MB
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 2047 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
Sun Jul 24 03:14:41 2011
J2EE server info
start = TRUE
state = STARTED
pid = 2776
argv[0] = E:\usr\sap\DEV\DVEBMGS00\exe\jcontrol.EXE
argv[1] = E:\usr\sap\DEV\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=E:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS00_SRVSIAPP04
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=DEV
argv[7] = -DSAPMYNAME=SRVSIAPP04_DEV_00
argv[8] = -DSAPPROFILE=E:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS00_SRVSIAPP04
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
Maybe you are looking for
-
Flash Builder 4, Data Services, PHP issue
I have installed a fresh Galileo + Fb4 plugin + WST for eclipse on my dev server/workstation. I have installed a standalone Fb4 on my laptop. When I use the shwanky new Data services feature and create a PHP service... I can create the service fine..
-
Reassign packages in batch job?
Hi, i know how workbench objects can be reassigned online - but can this be done in a batch job reassigning them from package z_a (no transport route) to z_b (with transport route)? In worst case a batch input possibility or even a Z-Report is apprec
-
Import video frames to layers set as Quicktime files (PS5)
For some reason, suddenly when I import video frames to layers, it is now set as Quicktime files that can only be opened (AVI,MPEG etc) and won't pick up MMV files at all. I used to make a lot of gifs fine with WMV files (thats the only format Photos
-
Aperture is a pig on my machine
I'm running a Quad-core Mac Pro, and Aperture is a pig on my machine. It doesn't matter if I switch to a small library (~ 2000 photos) or on my main library which has +50,000 photos. Aperture is still consuming a lot of CPU time, even if it is runnin
-
COBOL client unable to call Tuxedo methods (CSIMPAPP tutorial for Windows 2000 OS)
Hi, This relates to another post below. I have compiled the COBOL client and the COBOL server and produced .exes however when I get runtime problems now I get the message: exec CSIMPSRV -A CMDTUX_CAT:819 INFO: Process id=1912 Assume started (pipe) bu