" Path not found() "error when implementing single sign on

Hi,
We are implementing single sign on so that when users click on the "Reports Login" he is navigated to the obiee presentation services screen. For the reports login we have a .asp page which directs to the presentation services.
I have done the necessary changes in the instanceconfig and credentialstore xml files.
I have been receiving a strange error when I click on the reports login. I get the error
Path not found ()
Error Details
Error Codes: U9KP7Q94
I have checked the presentation server log file and I see the below error
Type: Error
Severity: 45
Time: Tue Mar 09 09:18:44 2010
File: project/websubsystems/ssportal.cpp Line: 1907
Properties: ThreadID-2672;HttpCommand-Dashboard;Proxy-;RemoteIP-127.0.0.1;User-;Impersonator-
Location:
     saw.subsystem.portal
     saw.httpserver.request
     saw.rpc.server.responder
     saw.rpc.server
     saw.rpc.server.handleConnection
     saw.rpc.server.dispatch
     saw.threadPool
     saw.threads
Path not found ()
Can anyone provide me an input how to resolve this issue?
This is bit urgent for me.
Thanks

Hi,
Please ensure that the navigational attribute is checked at the attribute level and also at the Infocube level and also check that correct mapping of this navigational attribute is done at the Multiprovider level.
Thanks,
Venkat

Similar Messages

Path Not found error when try to drag Navigational attribute in report

Hi Gurus,
I have created report on Multiprovider. When I try to drag navigational attribute in report getting error path not found.
I have checked Following and it's Proper.
1) Multiprovider is active
2) whether Navigational attribute is identify assign in cubes.
3) whether sid table thr for info-object.
4) I could see data in Multiprovider as well as in Cube
I created report on cubes also and getting same error.
Please suggest.

Hi,
Please ensure that the navigational attribute is checked at the attribute level and also at the Infocube level and also check that correct mapping of this navigational attribute is done at the Multiprovider level.
Thanks,
Venkat

AE: Path not Found error

Hi All
When we create one workflow with one role requested the approval process works, but it does not work when we have one request for 2 roles from 2 different systems. Take note that on their own these roles create a workflow and the approval process works but when they are put together the "Path not found error" appears.
Can anyone please advise on what the problem might be?
Any input would be appreciated!

Rodger,
please have a look at the error log to see exactly what fails.
I suppose that your initiator is limited to role + system, and you do not have defined a path for the second system, so AE does not know how to handle that part of the request.
If you can detail what your initiator looks like, and what the error log says, we may be able to give you more detailed help.
Frank.

Get file not found error when I try to sync

I get file not found error when I try to sync Iphone.

SteveDVD,
The use of the .WMV was because that was part of the Library .EM template. I would not anticipate problems with other formats, so long as they are supported and the same for all of your Menus in the Project.
If you have done several Motion Menu Renderings, you might want to clear Encore's Media Cache, just in case it is still referencing previous Render files.
And yes, the re-Importation should yield the same result as Linking/re-Linking.
Unfortunately, I do not have CS4, so I can't test this for you. There do seem to be a few real Bugs in the various CS4 programs, and maybe this is one?
That "File Not Found" rings a bell in my feeble brain. Seems that there was a post on that, but I do not remember it being related to Motion Menus. Maybe search will yield something of use.
Good luck,
Hunt

Action list not found error when trying to install Flash 11. I have IE8 and windows 32 bit. What can

action list not found error when trying to install Flash 11. I have IE8 and windows 32 bit. What can I do? Thanks

Hi, Please try to download the installer from the links provided in the following page: http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_header
Thanks,
Sunil

Captivate 8: Why am I getting a HTTP 404 Not Found error when I try to preview a responsive project?

Captivate 8: Why am I getting a HTTP 404 Not Found error when I try to preview a responsive project?

Out of curiosity, some here have recommended renaming an EXE file behind the scenes to eliminate that firewall message when starting up. Are you one of those folks that tried this? My thought is that if so, perhaps this is a result?
Cheers... Rick

Sourcing 7.0: Email Link in Mail templates when implementing Single Sign on

Hello,
We are implementing Sourcing 7.0 SP02 On premise.
We are in the processing of setting up the single sign on with Enterprise Portal.
In E-Sourcing 5.1 - when we implement single sign on with portal - the mail links in the mail templates have to be replaced with the portal URL and also - in order to redirect the user from portal login to the correct object in E-Sourcing (contract/MA/RFX) - we had implemented a custom portal solution (par file) to redirect the user.
So when the user clicks on the link in the mail - it will take the user to Enterprise portal login. Once the login is done - user will be redirected to the E-Sourcing object like RFX/MA which the token %DOCUMENT_URL% contains.
I wanted to check if there is any standard solution to this issue in Sourcing 7.0 on p

Hi Vikram, Thanks a lot for your reply. I got a release note 1485253 that explains that this is resolved. Please find the text below
2011/0000612672
In user emails, %DOCUMENT_URL% token is used to generate the document
specific URL. This URL takes the user directly to the document. However,
when Sourcing is integrated with SAP Portal, using only this token will not
take the user to the document. In order to fix this, ENCODE function has
been introduced. Wrapping this around the URL, the URL can be encoded and
used as a "forcedURL" in the portal link.
Would you be able to explain to me how this can be achieved through configuration? I tried now with a portal user of Sourcing and the link was still showing up as the old link. Is this forcedURL generated using a system property?
Regards,
Srivatsan

"Audio Record Path Not Found" error and new details

I've been having problems opening up older GarageBand files I've created and trying to add new content. When I try to record on an existing track, or in a new track, I get the error: "Audio Record Path not Found! Please enter it in the following dialog." (and there's no following dialog). I've tried to save the file as an archive, which has worked in the past, but doesn't work any longer. I'm using a MacBook Pro Core 2 Duo 15"
As a test, I installed iLife 06 on my older (PowerPC-based) Mac Mini. On that computer, I'm able to open the files, and record onto an existing track. None of my recording equipment is attached to this machine, however. If I save an archive and move it to my macBook Pro, I'm still not able to add recordings to it.
I tried reintalling GarageBand on my MBP, but I still get the same error. I've also deleted the preference files from Library > Preferences. (the two com.apple.garageband... files), and still no luck. It doesn't sound like the audio files themsleves are corrupted since I can open them on the Mini, so it's likely GarageBand. What else can I delete to make it a pristine installation?
I don't want to use my Mac Mini for recording, as it's too slow for my editing needs, but if I can't open the files on my MacBook Pro, I'll have to re-record them.
Anyone have any ideas I can try?

Excellent suggestion! I actually left the files on the external USB drive on which I store them, and accessed them from my MacBook Pro (instead of moving the files to the MacBook Pro), and sure enough, I'm able to edit and add to the files!
I still don't know why I can't access them locally on the MBP, but this workaround is certainly acceptible for my needs!
Thanks out to everyone who helped on this thread!
Brian Ibbott
Coverville.com
The Cover Song Podcast

Getting 104 resource not found error, when deploying my first servlet

Hi,
I am new to servlets, and after doing little home work i have created a small servlet but i am i getting http 104 resource not found error.
steps i followed:
1) installed pre-configured version of tomcat from http://www.coreservlets.com/Apache-Tomcat-Tutorial/.
2)created new directory called ch1 under webapps, created WEB-INF under ch1
3)included web.xml, classes in WEB-INF directly
<?xml version="1.0" encoding="ISO-8859-1"?>
<web-app xmlns="http://java.sun.com/xml/ns/j2ee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_5.xsd"
version="2.5">
<servlet>
<servlet-name>Ch1servlet</servlet-name>
<servlet-class>Ch1servlet</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>Ch1servlet</servlet-name>
<url-pattern>/servlet</url-pattern>
</servlet-mapping>
</web-app>
4) included .class file under classes folder from following Ch1servlet.java file, I have set class path to point to servlet-api.jar file and jsp-api.jar and compliled following java file to get .class file which is included in classes folder
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
public class Ch1servlet extends HttpServlet
public void doGet(HttpServletRequest request,HttpServletResponse response)throws IOException
response.setContentType("text/html");
PrintWriter out=response.getWriter();
java.util.Date today=new java.util.Date();
out.println("<html>"+
"<body>"+
"<h1 align=center>HF\'s Chapter1 Servlet</h1>"
+"<br>" + today + "</body>" + "</html>");
5) I am started tomcat server and when typed http://localhost( changed port from 8080 to 80), its giving tomcat page and not showing any error
6) When i typed http://localhost/ch1/servlet/Ch1servlet, its giving http 404 error
type Status report
message: /servlet/Ch1servlet
description: The requested resource (/servlet/Ch1servlet) is not available.
7) i have uncommented(it comes preconfigured) the invoker part in web.xml.
I have tried including servlet in an package and without package
I am not sure if its problem with server configuration orelse problem with my file placing.
Please let me know if you have any idea what went wrong.

I found this, unable to copy it, so i am typing it:
Feb11,2008 11:55:57 AM org.apache.catalina.core.AprLifecycleLIstener init
INFO: The Apache Tomcat Native Library which allows optimal performance in production environemnt was not found on the java.library.path:c:\program Files\Java\jdk1.6.0\bin;....
last line says
org.apache.cataline.startup.catalina start
INfo: Server startup in 657ms

File not Found error when synching Ipod

I have a fairly new Ipod and synced successfully for months, but now iTunes says it cant synch because of a "File not Found error" (no error number or other clues). I'm running the latest iTines and Ipod software, and I've reset USB drivers but still no luck. I cant reset the iPod itself becase I then got a "1418 error", which is why I then reset USB. I'm stuck, has anyone seen this before?
The Ipod itself plays fine and Itunes recgnises it OK, albeit very slowly, even thought I'm using USB 2.
One other piece of info; when this first happened, the sync must have first deleted the songs I no longer wanted, prior to unsuccesfully adding new ones. Those old songs show up on the iPod but are skipped when I try to play them.

Its on the same thread as this one ("connecting iPod nano (second Generation ) to Windows"). Scroll through the authors, you will find it.

File not found error when tried to open Document ID settings page

Hi
when i open sitesettings>site collection administratin >Document
ID settings
it shows
file not found error
adil

Hi,
first we need to figure out the error. change the web.config so that you can see the error on browser
1) Obtain the complete call stack instead of the default error page:
<SafeMode MaxControls="200" CallStack="false"/>
to
<SChangeafeMode MaxControls="200" CallStack="true"/>
2) CustomeErrors mode value (in the system.web section) is set to Off:
<customErrors mode="On">
to
<customErrors mode="Off">
Change these value in "c:\inetpub\wssroot" CA dirctory web.config and
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\TEMPLATE\LAYOUTS\web.config .
now again try to do the action. you will get the error on screen.
Whenever you see a reply and if you think is helpful,Vote As Helpful! And whenever you see a reply being an answer to the question of the thread, click Mark As Answer

File not found error when opening securedoc.html

We are having a sudden issue where recipients of our secure envelope emails will open a message from us with attachments and they will get a "File Not Found" error message.
We are still using a Post X appliance, but no config changes were made whatsoever and this started happening since last weekend. (Oct. 9-11)
I did reboot the Post X box and thought the problem was fixed w/ the reboot. I sent a secure message to myself and then opened it along with the attachment and all was good. I sent the second test and the problem was back; "File not found".
I have noticed that when I get file not found the address bar in my browser is pointing to: https://res.cisco.com/websafe/eo/error?error=notfound
The time after rebooting when it did work it pointed to file on my local computer hard drive:
file:///C:/Documents%20and%20Settings/mymachine/Local%20Settings/Temporary%20Internet%20Files/PXTemp/-6pAQ4_Y5hJEmKdQhtG8lhNx0zo!/PX_L_1255377132267.html
Any ideas what could have caused this sudden issue? How do we resolve? I have a call into support, but they have been researching it all day and our secure mail is down!

used bridge, didn't work.
tried right-click, double click..open in program.
same error.
files work in other adobe products.....
only way to get a jpg in there is to "paste" it in.

HP Device Not Found Error when trying to print or scan wireless- HP Officejet Pro L7590

Have had HP Officejet Pro L7590 All-In-One Printer for years. Always worked fine and I had no issues printing via wireless connection. Several months ago.. Possibly after a Windows 8 update. From Windows 8 to Windows 8.1 I have not been able to use the printers wireless feature. When I try to print or scan it shows the printer as offline. Also get an error message that tells me "HP Imaging device is not found". I can still print when connected to USB. Cannot scan or use features of the HP software suite. I have tried several times to correct. Reloading the software and drivers several times, but no success. I just tried again and was able to print the test page wireless, so got all excited and thought I fixed it. Then tried to print something and got the same error message I have seen in the past. I have talked to certain supports saying that it may be a firewall setting within Windows. Any other suggestions? Thanks

Hi @rfjones002,
Welcome to the HP Support Forums! I see you are not able to print or scan wirelessly to your HP Officejet L7590 and your computer running the Windows 8.1 Operating system. You get a 'Printer offline' or 'HP Imaging device not found' errors.
I would like you to start with the steps listed below:
Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%
Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted
Uninstall the software again - Uninstall the Printer Software Instructions
When the uninstall has completed restart the computer
Follow these steps to reset the registry settings and options for Windows Installer.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type
msiexec /unregister
and then click OK.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type
msiexec /regserver
and then click OK
*Note: there is a space between the c and the /
If you have any difficulty with this step, please use this link to perform it another way. Restarting Windows Installer
Run Disk cleanup from Accessories\ System Tool < How to Delete files using Disk Cleanup
Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayerflashplayer/downloads.html
Perform a clean boot > How to perform a clean boot in Windows
Download the following SP40669 File Download - if this does not download and or install please proceed to the next step.
Turn off the Real-Time Scanning and Firewalls; The image below is a McAfee example, if you have a different antivirus program and need help disabling Real-Time Scanning and Firewalls let me know.
- Image source
Now you can go ahead and download and install the software here >
HP Officejet Pro Full Feature Software and Driver
If you are unable to print a test page, please run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
Please let me know if this was successful! I will watch for your reply.
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Page not found error when navigating in Iview application

Hi,
I have developed an application,and I am able to view a sucessfull preview of the Page as well.There are htmlb links on the page.When clicked,they navigate to the next jsp page.This iview was assigned to a user,and the portal was logged in though a local ip address.The application works fine.
In trying to access the portal though an external Url,the initial page comes up perfectly fine.However the next page,does not come up,when a link on the first page is clicked.I get initially a popup with the message:
"This page contains both Secure and Non secure Items
.Do you want to display the non secure Items."
The options on the Popup were yes,no,More Info.
When I clicked yes then I get the display page not found error.The error is:
" <b>The page cannot be found
The page you are looking for might have been removed, had its name changed, or is temporarily unavailable.</b> "
The Information I get when I click on More Info is-
<b>Downloading non-secure content from a secure Web site
The Web site you are viewing is a secure site. It uses a security protocol such as SSL (Secure Sockets Layer) or PCT (Private Communications Technology) to secure the information you send and receive.
When sites use a security protocol, information that you provide, such as your name or credit-card number, is encrypted so that other people cant read it. However, this Web page also contains items that do not use this secure protocol.
Given what you know about this Web site and your computer, you must decide whether to continue working with this site.
If you do not feel confident about working with this site, click No.</b> "
This problem occurs only to a particular user.If I add the role to another user,and view the iview I am able to navigate without problem(there is no popup as well).Even for this User,it is happening only when,I access through extrenal url,not when I access the portal through the local IP Address.
Regards,
Harish

Hi,
This is a further Update.The problem described above has something to do with the roles.When some roles(cusom) are assigned the navigation occurs.Can you please let me know if there is any role related configuration with SSL.
Regards,
Harish

Codec Not Found error when trying to render/export layered sequence

I have a sequence that I never had problems with in the past but as of yesterday when I open the project and try to render or export. I get the infamous dialogue box saying, "Codec not found. You may be using a compression type without the corresponding hardware card."
I've narrowed it down to only being a problem wherever I have two particular types of media clips layered one on top of the other. In this case it is occurring wherever I have an Apple ProRes 422 (HQ) clip layered with an Animation codec clip containing a graphical bug that was created in After Effects and exported as a Quicktime Movie with RGB+Alpha. Because of the Alpha channel in the bug clip, it is automatically given the Animation codec upon export from After Effects to retain and preserve the transparency needed. I've also narrowed it down to only occurring when all this is combined on a sequence with its compressor set to standard ProRes 422 or ProRes HQ. If I set it to any other codec, such as any DV/DVC Pro or MPEG IMX codec then I can render and export again.
Also interesting is that I can nest the sequence into another sequence and render and export just fine as well, even with it set to either ProRes codec (which will probably prove to be a suitable workaround for the time being), however, any additional insight into this issue that anyone can provide, pertaining to what may have changed or caused my original sequence to suddenly not want to render anymore would be greatly appreciated.
And if anyone else reading this comes across this this same type of problem themselves, then I suggest what I just got to work: Duplicate your sequence, then delete the clips from the new sequence and nest the original sequence into it.
Here is some additional background info if desired:
I'm using FCP 6.0.6. The sequence I have going here is set to Apple ProRes 422 and consists entirely of Quicktime Movie files. Video Track 1 has the main video clips using the ProRes HQ codec (Again, even with the sequence set to ProRes HQ, it doesn't make any difference here). Track 2 has a graphic bug that was created in After Effects and layered over the Track 1 clips at various places. I was able to work with these clips and render as well as export the sequence with no problems last week. However, I was requested to revise the bug in After Effects, and then replace the old bug with new bug and export the sequence again. So yesterday, I simply opened up the After Effects project file for the bug, made the revisions and exported it with a new name using the same settings as the previous bug. The render problem I'm now facing surfaced right when I opened the FCP project file yesterday, before even importing and replacing the old bug with the new bug. I went ahead and imported the new bug and placed it in place of where the old bug occurred. But the render and problem remained. On this particular problem sequence, I can render the new bug if I actually disable or remove the ProRes clip beneath it, but I cannot in turn render the ProRes clip after disabling/removing the Animation clip above it.
Now, I can copy either type of clip into their own sequence allowing the clips' respective native settings (ProRes HQ & Animation) to take effect and then they will playback and export just fine. I can even copy the bug clip (Animation codec) and paste it into the other clip's ProRes HQ sequence and it will render and export just fine from there as long as it is placed next to the other clip and not layered over it. On these newer sequences, it is only when the bug (Animation) clip is layered over the ProRes HQ clip with the sequence set to ProRes or ProRes HQ do I tend to still get the "Codec not found" error.
I've also tried the following steps to try and troubleshoot to no avail:
1. Copied entire sequence into a new sequence. Problem still occurs.
2. Closed FCP, trashed preferences, and restarted FCP. Problem still not resolved.
3. Opened project on another computer, had same problem.

Thanks for sharing these ideas about dealing with this error message.
For what it's worth, I finally managed to solve a similar issue by going into sequence settings, choosing the Video Processing tab, and changing Render 10-bit YUV to Render 8-bit YUV.
Maybe this helps someone?

" Path not found() "error when implementing single sign on

Similar Messages

Maybe you are looking for