Pavilion g6 internal hard drive not working , Can I use WD internal hard drive ?

I have pavilion g6 series laptop . I don't know RPM .
HP internal hard drive is looking very costly.
Can you tell me whether I can use WD internal hard drive or not . If yes then How much RPM hard drive I need to buy?

Hi,
We won't concern about RPM, faster (more rpm) is better. The HDD's are much, much, much, much cheaper now. They were more expensive during a flood in Thailand few yours back. Yes, you can use WD HDD for your computer. You can pick one from the following list:
http://www.newegg.com/Laptop-Hard-Drives/SubCategory/ID-380
My suggestion:
http://www.newegg.com/Product/Product.aspx?Item=N82E16822136835
or this:
http://www.newegg.com/Product/Product.aspx?Item=N82E16822178340
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Tried to restore my mac pro, now it`s not working, can i use the time machine backups?

Tried to restore my mac pro, now it`s not working, can i use the time machine backups?

Yes.

G4 Desktop's CD drive not working, can I install from a laptops cd drive?

Does anyone know if I can install tiger to a desktop G4 with a non-working cd drive? can I use a laptop or a network conection? thanks

Hi fergarcia274,
You can use Target Mode if you have a firewire cable connected. This procedure is outlined in Mac Help. It reads as follows:
How to use FireWire target disk mode
Learn what FireWire target disk mode (TDM) is and how to use it.
Description and requirements
FireWire target disk mode allows a Macintosh computer with a FireWire port (the target computer) to be used as an external hard disk connected to another computer (the host). Once a target computer is started up as a FireWire hard disk and is available to the host computer, you can copy files to or from that volume.
Important: The computer will not go into FireWire target disk mode if "Open Firmware Password" has been enabled.
Host computer requirements
Host computers must meet the following requirements:
Built-in FireWire port, or a FireWire port on a PC card
FireWire 2.3.3 or later
Mac OS 8.6 or later
Target computers
The following models can be used as target computers:
iMac (Slot Loading) with Firmware version 2.4 or later
iMac (Summer 2000) and all models introduced after July 2000
eMac (All models)
Mac mini
Power Mac G4 (AGP Graphics) with ATA drive
Power Mac G4 Cube
Power Mac G4 (Gigabit Ethernet) and all models introduced after July 2000
Power Mac G5 (all models)
iBook (FireWire) and all models introduced after September 2000
PowerBook G3 (FireWire)
PowerBook G4 (All models)
FireWire software
You can download the latest Firmware and FireWire software from the Apple Support Downloads page (http://www.apple.com/support/downloads/).....
I've done it before, and it not difficult.
Best Regards

CD/DVD Drive Not working on iMac using Snow Leopard

Can anyone help me with a possible solution as to why my CD/DVD Drive on my iMac (running Snow Leopard 10.6.8) has suddenly stopped recognizing any inserted discs?
It makes a noise - as if it's trying to read them - but then ejects them! Although my iMac is quite old, the actual CD/DVD Drive was only replaced a couple of years ago!
I'd be grateful of any help, alternatively a rough idea of price for either replacing the drive (if it has gone to the great Apple Drive in the sky) or a plug-in removable drive? Thanks

Try resetting the SMC Intel-based Macs: Resetting the System Management Controller (SMC) and PRAM OS X Mavericks: Reset your computer’s PRAM
sometimes it helps. You can also try a cleaning disc or blowing some compressed air into the mechanism to get rid of any dust that may be affecting it. The bottom line is that the slot loading SuperDrive, mounted sideways and exposed to the heat generated inside an imac, just doesn't last long. You're better off with an external drive, LG makes good ones for less than $30 http://www.amazon.com/LG-GE24NU30-Super-Multi-External-DVD-Writer/dp/B007WLP0BY/ ref=sr_1_20?ie=UTF8&qid=1413369637&sr=8-20&keywords=lg+super+multi+drive

Mouse and trackpad just not working - can't use machine

Hi there,
I have a late 2009 iMac running an up to date version of Mountain Lion and all has been well until today.
My iMac behaving very oddly with my trackpad. I have tried switching it our for a wired mouse and I get the same results. This is what I am experiencing:
The iMac behaves as though I have either:
clicked and held my finger down - on my desktop when I move the cursor around the iMac thinks I'm trying to select an area
right clicked - when I try and click on an icon in the dock, the right click options appear
Additionally I am experiencing the following
iMac doesn't respond to me clicking on an icon
I can't select an option, ie if I do select an option such as 'Continue' (more of that later*) I can't get the iMac to respond to me clicking it
Before switching over to my mouse I replaced the batteries in my BT keyboard and the trackpad. I've also tried attaching a USB keyboard (albeit a PC one)
I have tried the following:
resetting the V/P RAM
booting in Safe Mode
Shutting down, unplugging everything (inc power cord) and left for 10 mins before rebooting
Booting in recovery mode and reinstalling M Lion - I can't even do this
* When presented with the recovery options I can scroll through the 4 options with the up down arrow keys, I can select 'Continue' with the mouse or trackpad (it goes a solid blue colour) but I move forward - either by clicking it or hitting Enter on the keyboard.
I'm now totally stuck as when I reboot (there's been a fair few forced ones) I can't even select my user profile (or any of the Resart/Shut Down options)
Time to make a Genius Bar apppointment, or is there something else I can do?
Thanks
EDIT: I did manage to select my wife's user profile and eventually got into the system, and very strangley if I access the iMac via LogMeIn on my work PC it responds excatly as it should. I can click, select as normal. Even when I'm doing this remotely my trackpad and mouse continue to behave incorrectly (as described above
Message was edited by: TWH3

Man.. I is such a fool sometimes.
So I reinstalled ML - which on my cruddy 4 MB ADSL connection took a fair while. And still the problem was there.
Then I tried one small thing... take the batteries out of the trackpad and then try using the wired mouse. BINGO.
After a few more tests it has bceome clear that it was the trackpad that was at fault. Not my iMac, not my OS. Having it on would screw up what the wired mouse was trying to do. Should've checked that HOURS ago.
I have a spare trackpad (I used to have a Mac from work and bought myself a trackpad for it. No longer have a Mac for work as a switched employers, but ironcially willbe getting one next week!). I have installed the 2nd trackpad and all works fine.
Lesson learned - do more thorough diagnostics!
I'm off to cancel my Genius Bar apppointment

Shattered screen, passcode not working, can't use cloud to restore

I shattered my iPhone 5s screen (ios8). Tried to back my data up to an old iPhone4 (ios6). I can't back up via the cloud because the phone I'm baking up to is running an older version of iOS than the phone with my data on it. I'm trying to back up from iTunes but can't b/c I can't enter my passcode on the shattered screen. I only have backups on the cloud. I have never backed this phone up to my computer. Because I was told iCloud back ups were good enough. But now I'm stuck in a catch 22.

Even if you had backups in iTunes, you would not be able to restore them to the iPhone 4 - you would run into the issue of it running the older version of iOS either way.
You can restore a backup made with an older iOS to a phone running a newer one but cannot go the other direction.
You will need to get your 5S repaired/replaced so you can restore your data.
~Lyssa

Laptop's internal MIC is not working

My laptop's internal MIC is not working.
I tried updating my audio driver to the latest version. But te problem remains the same.
I also tried to record using SOUND RECORDER. But from that recorded sound, I am getting like an HISSING sound.
Now I have the latest version of the driver only but it is not working. Please help me....
My Laptop Details:
Product name: HP 2000 Notebook PC
Product number: D9H41PA#ACJ
Serial number: [edited Serial Number by Moderator]
Audio DRIVER: Realtek HighDefinition audio driver
Audio driver version : 6.0.1.7071

Hi,
Please enable Microphone in Recording devices as follows:
1. Right click speaker icon (right hand corner)
2. Select Microphone devices
3. Right click Microphone
4. Enable it
5. Click Apply/Ok
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Recently installed Windows 7 on Pavilion dv6748us - internal microphone does not work

Hi,
sojo972 wrote:
I have been searching the web extensively, without success, to find how to resolve this issue.
I recently installed Windows 7, 32 bit, on my wife's HP Pavilion dv6748us laptop. Now her internal microphone does not work.
Have gotten some "roadside" advice to use a Windows Vista driver; Have no idea what the driver is or how to get it.
Have found some information about uninstalling realtek audio driver and reinstalling an older version; Have no idea on this one either.
Would really appreciate a definitive answer with a positive result.
Thanks for all help.
The drivers for the laptop are located here. select Vista and Driver-audio. The Vista driver should work. You can uninstall the driver from within the Device manager. Start --> type devmgmt.msc and the device manager will open. Locate the HD audio device and right-click it and update the driver.
After that is done go to Control Panel and Sound and the recording tab up top. Check to see if the microphone is grayed out. (not grayed out means driver is properly installed). The microphone should also have a green checkmark next to it. It is now a matter of selecting the microphone then selecting Properties to enable the microphone and then test and adjust the input level. Look at the tabs (listen,levels and advanced).
Had you considered trying Windows update or the Realtec website as a drivers source?
regards,
erico
regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Hi:
Looking at your system information you could have one of two possible audio cards:
Conexant HD audio or the RealTek HD Audio
The fact that you couldn't install the RealTek HD audio driver indicates to me that you don't have a RealTek audio card. Check your device manager and look at your sound card and check to make sure which audio card you have.
Here is the Vista 32 bit driver for the Conexant audio card:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
Here is the Vista 32 bit driver for the Realtek audio card:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
If you in fact have the Realtek audio card, I would download and install the latest, greatest HD driver directly from the RealTek site:
Accept the agreement, download and install the first one on the list. Maybe it has been updated to fix the issue you are experiencing.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownT...
Paul

Internal microphone still not working - Pavilion Notebook dm4

My internal microphone is not working. ( IDT high definition CODEC)
I think I have tried everything!
Driver updated
Device is shown as working ( green bars moving etc)
I have uninstalled and re-installed driver
In the past it OCCASIONALLY worked
Now it is not working at all.
Can ayone suggest anything else?
Christopher

Reset PRAM. http://support.apple.com/kb/PH4405
If this does not help, take the computer to the Apple Store to have it checked out.
A new Mac is in warranty for 1 year from the date of purchase.
If there is any manufacturing defect found, it will be repaired free of charge.
Best.

I have a pavilion dv4 and my internal microphone is not working. how do i fix this. thanks

I have a pavilion dv4 and the internal microphone is not working. I believe I had it working for 1 time but can;t figure it out. please help. thanks

Hi,
Please check it using these steps:
1. Right click the iocon speaker (bootom right hand side)
2. Select "Recording Devices"
3. Enable the microphone
Hope this helps.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

The sound seems very faint but can here static on playback.

My ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix

my ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix, other than take it to apple.
thanks!

The wish list only works on apps you have to pay for. To get it tap the icon of the app you want to save. After it opens at the upper right corner is a box with a arrow. Tap that then tap add to wish list list in the box that opens.

Since I upgrade to Lion OS my optical drive stop working can't read or write at all I did what I could to fix it but still not working , any help please

Since I upgrade to Lion OS my optical drive stop working can't read or write at all I did what I could to fix it but still not working , any help please

It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

How can I use my external hard drive for my iphoto instead of my mac book pro memory?

i don't know if this question has been asked before: how can I use my external hard drive for my iphoto instead of my mac book pro memory? just like itunes all my song are save on my external hard drive. make sense?

Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
LN

I would like to know if you have to back up a macbook hard drive, can I use a external hard drive that has been previously used to back up several pc 's, or is it best to have a separate external drive for the Mac?

I would like to know if you have to back up a macbook hard drive, can I use a external hard drive that has been previously used to back up several pc 's, or is it best to have a separate external drive for the Mac?

In the Mac side of things, backups usually come in two flavors: clones or incrementals.
A bootable clone is a bit-for-bit copy of all essential files in the startup volume. If using the Lions, clones can be made using CarbonCopyCloner or just plain old Disk Utility. These backups represent the safest protection of your info, but take the longest to do. Recovery is an inverse process: you copy the clone back into the internal drive.
Incremental backups start with a complete backup of the startup volume and only copy whatever changed from the previous run. OS X includes the fully integrated Time Machine backup utility to do this. It is extremely easy to do and takes the least amount of time. Recovery is another matter altogether since you have to start with a freshly installed instance of the OS and have to apply all intervening backups to bring the result to the latest saved version.
As for where the backup takes place, the recommended media is an external dedicated drive or drives connected via the fastest interface available on your Mac: Thunderbolt, USB3, Firewire, or USB2. Network-based backups, wired or wireless, are attractive but may not offer the same performance and hence take longer. Also important to note that the entire drive need not be completely dedicated to a single backup. The Mac's EFI firmware infrastructure allows for an unlimited number of partitions on a hard drive and each can be used for either type of backups.
Holler if you need specifics on how to do each. This was just an executive summary.

Pavilion g6 internal hard drive not working , Can I use WD internal hard drive ?

Similar Messages

Maybe you are looking for