Payment question issue.....

Hi I am a new customer and I set up a payment by phone with my checking account to be taken out today.  I moved funds from one checking account to the other to assure coverage but I made the mistake and moved it to the wrong account.  I called immediately to pay by debit card but I was told the payment went through and if it showed it went through then I was in the clear.  I told her I would feel better if I just went ahead and made payment because the last thing I want to do is pay reconnection fees on three phones.  But she said it was clear if it shows it posted.  But when I checked my checking account it's not showing that it did.  It's not even showing that its been processed.  I don't have overdraft coverage so I am not sure where the payment came from if its not even showing in my account.  And I would call the bank but I belong to a small credit union and they are not open.  I would love to make this right but I'm not sure what to do.  Can anyone help?  If it goes through over night will I wake up with no phone?  This is a month to month account not a prepaid.  (Was not sure if that mattered or not.)  Any advise would be greatly appreciated.

    Hello wtlozy!
I'm so happy to welcome you to Verizon Wireless! We're glad you joined! Were you able to view your balance on My Verizon? Did the money end up coming out of your account? Thanks to the community! They had some great suggestions! You can also dial #BAL from your phone to see if you have a balance, and #PMT to make a payment.
I hope all is well!
Katie H
VZW Support
Follow us on Twitter @VZWSupport

Similar Messages

  • W540 Questions & Issues

    Hi Folks,
    Questions & Issues:
    1.  Where is the Break key on the W540?
    2.  My W540 locks up about once every two days - there does not appear to be any common task that causes this.  When it lock nothing works, not Ctrl+Alt+Del, I must power off with the power button.  Any comments or suggestions?
    Observations:
    I'm not a fan of the new keyboard.  For example, the F1..F12 keys are difficult to read (the F parts, not the pictures) and the off center feel leads to difficult typing (at least for me). 
    TIA

    Hi SD
    1. Try Fn+B for Break
    Refer to this post for more information.
    1.2.
    2. Go to Start > Lenovo > System Update. Install all Critical and Recommended Updates.
    3. If No.2 does not work, go to Task Manager > Startup > Try uncheck a few which is optional. Do not uncheck Lenovo Stuffs and Antivirus.
    Peter
    ThinkPad W520 | ThinkCentre E73 SFF | IdeaPad K1 | IdeaPad Yoga 11s | Miix 2 10" | 3000 Y300
    Give kudos to reward people for their assistance | Mark thread solved if the solution works | Please do not send me an e-mail regarding technical questions | I am not an Lenovo employee
    =====================================
    Dolby ; IdeaPad Slate Tablet

  • Can we make advance payments and issue a new PO for undelivered goods?

    Hi Experts,
    Can we make advance payments and issue a new PO for undelivered goods?
    Regards,
    R

    Hi Rounak,
    Yes, you can create a standalone AP Down Payment Invoice and adjust  it against the invoice you create later or you can create a payment on account outgoing payment and then reconcile it with the invoice in the ougoing payment screen.
    Regards,
    Rakesh N

  • ... several questionable issues ...

    Hello everyone,
    Issue 1 - Is there a search function to narrow the 12000 topics to handful I can manage?
    Issue 2 - Is LightRoom a better (faster, more specific with metadata, and speedier) than Bridge for a cataloging/browsing tool?
    Issue 3 - In LR, we've discovered we can catalog audio interviews by using the .wav files and giving them the same name as the image of the person being interviewed. (JimmyPic01.tif is paired with JimmyPic01.wav, JimmyPic02.tif is paired with JimmyPic02.wav - we give the image the metadata about the date and time of the interview, etc.) Now, is there a limit to the size of the .wav file associated with an image? Will our researchers be able to click on the .wav file and listen to the entire interview? Is it possible to alter the program used to open the .wav files in order to permit fast forward and replay functions? Does the audio player in LR permit those functions?
    Issue 4 - Does Adobe build a catalog package with the elegance of LR (pleasant-looking interfaces and speedy searches) and the simplicity and power of Bridge (catalog audio, video, and documents)? Does LR permit the creation of metadata fields as easily as Bridge?
    I guess many of these questions will get answered if I simply install a copy and play a while. . .?
    Okay . . . I'm off to see the download wizard. . .
    I'll come back and let everyone know what I find as well as see who contributes to my quest. . . (grin)
    Until that time. . . Earl J.

    Hello Wolf,
    Horace Walpole once stated
    The whole [Scotch] nation hitherto has been void of wit and humour, and even incapable of relishing it.
    So, perhaps this Lightroom forum is more like Scotland than is evident at first glance... (grin) I'm not familiar with the source of your quote... most professionals don't get that status until they have practiced their craft for many years... so, consider me a
    professional-in-training ... or
    amateur, if you like.
    Yet, another misunderstanding on the readers' part... I am fully aware that my comments here on the forum would draw as much attention from Adobe to ban me than my opinions on global warming would attract the attention of the new administration in DC... I was addressing the three initial responders to my original post and inviting them to do what they will to avoid my intrusions.
    My questionable issues revolved around issues of the program which caused me to ask questions for further clarification - there were never any
    objectionable issues raised... simply a few questionable ones.
    I have no intention of letting anyone drive me away while my curiosity for the program is still fresh and vibrant. I'll continue to be me and will permit others to be who they are ... I have no expectations about any aspect of these forums except that most subscribers come here 1 -
    to learn and 2 -
    to help. Finding and making friends might be an ancillary benefit, but for the most part, I would suspect not a primary objective.
    I base my knowledge on forum, email distribution list, and listserv memberships as the creator/moderator of a librarian forum that has recently moved past its decade-old mark... and the current host of several social networks.
    So, although I am new to
    this forum, I am not new to participating in them. I can appreciate the fact that many may not, and will not, accept my approaches to bulletin boards and email interactions; however, it's a big forum, and I am not required, or inclined, to follow any personal preference demands, content restrictions, or behavioral limitations of anyone outside the Terms of Use.
    So, I'll do the best I can at adjusting and adapting in order to get help and give help - but for those who demand the rest of us adjust to their expectations and behavioral norms, they'll have to do a bit of adjusting and adapting themselves ... if nothing else, just to demonstrate they
    can do something that they demand of others.
    @Wolf, thanks for the advice and the encouragement ... I will consider it seriously.
    Thanks for taking the time to respond and compose such a considerate response... I'm a retired Army paratrooper, so
    bail out has such a negative connotation to me - even before the economic crisis began - so I'm not about to leave until all the questions I have are answered.
    Until that time. . . Earl J.

  • How to find whether the payment is issued to an invoice ?

    Hi Team,
    Iam using : R12 Version.
    Can you please let me know in which table, i can find the information regarding whether a payment is issued to an invoice ?
    In addition to it, can you please tell me the navigation for the same.
    -Sri

    Pl check this table - AP_INVOICE_PAYMENTS_ALL
    You can also view the payment information in invoice windwo under 'View Payment'

  • Syncing Audio with Merge Clips option and OMF export question/issue

    Hi,
    In the past when I've edited video, when it came to syncing audio I always did it manually.  This time, using Premiere Pro CC, I used the merge clips option, to speed up the syncing audio process, which was a huge time saver with excellent results.
    The question/issue I have..is that when I get my OMF exported for my sound editor, will this screw anything up, since on the project file, it doesn't use the original audio file, but the one that was merged.  And in the project list, I don't even need to have the original audio file listed, since it's already been merged into a clip, which I used in the project.  I know it's the same file used, but will it mess anything up since a merged clip audio was used instead of just dragging the original track onto the timeline? 
    - Ken

    A good way to know for sure (and therefore feel comfortable that you're doing the right thing) is to do a test OMF export, then open this in Audition. This ill show you exactly what you're exporting.

  • F110 payment advice issue

    hi experts
    i have a question how to find the print program by knowing the scpript name?
    we use the transaction code f110 to do the payment, then we print the payment advice. In the paying company code setting we know the script name. the user want to print the fixed lines in the first page, I check the script and can't find the line number setting in the script soure code. that's why i want to find the program call the script. I guess it's should be a sap standand program , so is there any configuration we can follow to make ithe request come ture
    any voice will be appreciate
    TIA

    hi Sai,
    we can't test in our test system. can we just directly change the variant in the product sytem is there is anyother impact from this change.
    and i have another qusetion , although it's a stupid question.
    Are you sure after we tick that checkbox the cover language will be showed as English not German any more? Or have you met the similar issue before ?
    appreciate if you can response the most
    warm regards

  • Payment Program issues

    Hi all...
    when i am creating a automatic payment program in the parameters tab, when i am entering the vendor code range, iam not able to exclude some range of vendor codes, as it was possible in any other screen with multiple selection button.why the same is not available in APP parameters screen?
    and even in free selection tab i am not able to exclude values for vendor codes? (in the field name column there is no field with name LFA1-LIFNR to exclude for the proposal?
    and what payment medium Program and Payment transfer medium can be maintained in the customisation for the payment method T (Bank Transfer).
    kindly give your valuable suggestions to fix these issues ASAP
    i will assign points to each helpful answer
    Thanks in advance
    SRINU

    Hello Srinu,
    Regarding your second question, the payment medium program normally differs from country to country.
    Please look for programs with these names...RFFO[country code]T
    Reward points if the info helps you further.
    With Regards
    Vijay Gajavalli

  • Offcycle-Reversal & PAYMENT NUMBER Issue

    Hi All,
    Please help me with this issue:
    We have run the DME for an employee which generated PAYMENT NUMBER (Example:1)
    Then we went to PUOC_10(Offcycle work bench) and did the reversal which generated PAYMENT NUMBER (Example:2) Over riding1
    Then we realized there is some issue with that employee and did retroactive accounting and did the DME which generated PAYMENT NUMBER (Example:3)
    Now the issue is :
    In the Positive Check file we are getting both PAYMENT NUMBER 2 AND 3 WITH RESPECTIVE AMOUNTS.
    IS THERE ANY WAY TO REMOVE PAYMENT NUMBER 2 AND ITS AMOUNT.
    Thanks in advance
    Gopi

    I am bit confused about question.
    Why do you want to remove the value for PAYMENT 2? I think its a valid value unless you do reversal for PAYMENT 2 and then do retroactive accounting and calcualte PAYMENT 3.
    But if you're not carrying out reversal for PAYMENT 2 and then generating PAYMENT 3 retroactively then it is correct.
    Let me know.
    Arti

  • Adobe Photoshop Touch Question / Issue

    Hello,
    I bought Adobe Photoshop Touch some time ago for my Samsung Galaxy Tab 8.9 and I liked it so much. Of all the apps I had for photo editing, this one gave me all I need. I used to own Adobe Photoshop CS2 on my old PC so I wanted something for my tab as well. I was very satisfied by this app until my tab died some time ago. After a pain of service and repairs, the tab worked again but it had a new issue. Anytime I used the device on something more demanding (i.e. playing games ) the tab overheated a lot and the screen started to touch itself very much as, if it was pressed all the time. After some time of struggle with it I decided to wipe it clean and pass it out to a family member who would maybe dedicate more time to fix it.
    Last month I bought myself a new device ( Sony Xperia Z ) and I was eager to get all my data on it and apps of course. To my sadness Adobe Photoshop Touch is not compatible with my device now, and it just sits there in my app list doing nothing . I could install only Photoshop Express but it does not give me the full access I had with Touch. I saw that there is another product called Photoshop Touch for smartphones and it seems to be the same as what I had only phone edition.
    My problem is that I can not get this new app unless I pay for it and I do not wish to do that because I already paid for the previous edition.
    My question is: Can I somehow obtain the Smartphone edition and the previous version ( which apparently is for tablets I suppose ) be removed from my Google Play account. I would purchase the smartphone version but there is no point in having 1 app 2 times.
    I would happily like the staff to remove my previous version from my account if they would gave me the smartphone version and I acknowledge that the tab app was more expensive than the smartphone version and Adobe will not refund me the money difference nor are they obligated to give me the smartphone version. I am just asking if it would be possible because I like that app and it's such a shame for it to be in my app list and not be used. Thank you for your time in reading this and no matter what answer I get, I will be ok with it. Have a nice day .

    I don't think you'll have much luck. PS Touch for tablets was designed for just tablets; PS Touch for phones was designed for just phones. Touch for phones came out a little later than Touch for tablets. (By several months, if I recall.) On the brighter side, if you ended up buying Touch for phones, you'd be covered no matter which device you had.
    Both are very similar in function. I believe the only differences are their UIs; Touch for tablets is landscape-oriented-specific while Touch for phones is portrait-oriented. (Some elements are also placed differently.) I imagine this allows for maximum utilization of screen real estate and element placement.

  • Default payment method issue in Additional Off-Cycle Payments

    Hello everyone,
    I have an issue with Additional Off-Cycle Payments and running this in payroll driver.
    I have maintained V_T52OCB  or "Define default values for payment methods" in IMG as Check (C) but when I run payroll for this employee I see that payroll driver is considering Infotype 0009 which is a direct deposit but when I run the same employee in OFF-CYCLE Workbench I see that the run is defaulted to Check and is not considering Infotype 0009 which is correct.
    What I don't understand is the same record when processed through regular payroll driver (RPCALC) is considering Infotype 0009 but Off-cycle is considering default payment method for Off-Cycle defined in IMG.
    Has anyone seen this kind of issue?
    Thanks,
    Hemanth.

    Hello Hemanth,
    The value you maintain in V_T52OCB  is only for defaulting the Payment type in Offcycle Workbench Screen for the Reason you have choosen for the offcycle, it doesn't mean it would be run only by that payment type and you can overrite in offcycle workbench itself by choosing the other payment type.
    For Offcycle run it always with the value entered in IT 0009, For off-cycle, if there is a valid record with subtype 5/6, it will be used otherwise subtype 0/1 will be used if payment method selected is according to IT.
    If payment method is not according to IT a new record will be created in IT 0009 for the exact date.
    For Manual check, the check number can be entered in Offcycle workbench.
    I hope it clarified your doubt.
    With Regards,
    S.Karthik

  • Automatic Payment Run Issue

    Hi,
    In my company I want to do the automatic payment run with the customer setoff & customer open items document  currency is USD & vendor document currency is LKR .I want to do the payment run in LKR.(My company code currency is LKR) I have defined the payment method "C" in both the Master data ( Customer and Vendor). Now I am trying to run Automatic Payment Program. But system shows all Customer invoice in exception list and display the following given below message. Can I run the automatic payment program using difference currencies? Please advice me to resolve the above issue.
    Further this process I am doing for LKR customer & vendors & its working fine without giving any issues.
    Enter a payment method for incoming payments
    Message no. FZ010
    Diagnosis
    The balance of the items to be paid requires a payment method for incoming payments. You specified a payment method that is defined for outgoing payments.
    System Response
    The payment method is rejected.
    Procedure
    Enter a payment method for incoming payments
    Thanks
    Chrishantha

    Hi,
    I have created incomming payment method under this company code & asing to the customer master records.
    How can I select multiple payment method at the time of doing auto payment run
    Further , I didn't do any changes in vendor master records since I have to do the outgoing payment also
    Please advice
    Regards
    Chrishantha

  • Payment Advice Issue- Print and fax at the same time

    Hi,
    Currently payment advices are being sent to business partners (vendors) thorugh fax/email.   This is because process module Z_SAMPLE_PROCESS_00002040 is active in the system.  
    What I want to do is to be able to also print the payment advices even if vendor has communication data in the master data.  Program RFFoEDI1 is used with a custom form.   IDOCS are sent correctly to bank and remittance advices are faxed to vendor successfully.   With business wanting hard copies of remittance advices, when I try to reprint after first payment run is done and faxes sent running RFFOEDI1 and the payment document number, system says no records selected.   I searched in OSS and all the notes related to this issue are already in our system. 
    I have tried hard to solve this but no luck even I have done this before with other print programs but no RFFOEDI1.  One option is to remove the fax/email addresses from vendor which allows me to print but client does not want to remove fax numbers from vendor master. 
    Any suggestions will be appreciated.
    Dam

    Look into BTE 2050, through which you could possibly e-mail an additional copy to a generic company e-mail as back up electronic filing of RA. And then you can print it if need to print them on Adhoc basis
    Ron

  • F110 Payment run issue

    Hi,
    We have created a payment run 1a  for a range o vendors  1 - 200  scheduled the payment run, vendor no 10 was included. Then 10 mins later scheduled another payment run for vendor number 10 only the payment run was scheduled. Now the issue is for both payment runs the backgorund jobs are still running after 4 hours!
    In FBL1n for the vendor 10 invoices have been cleared by both payment runs, which is ok.  In SM50 both background jobs I can see they are stuck in program "CL_BCS_EMAIL_ADDRESS==========CP"  this is the part of the BTC used to determine the email address of the vendor.
    Has anyone come across this issue before?
    thanks
    Joe

    Hi,
    yes, though couldn't figure out the reason, however if you check SP02 in the spool area you will be able to view all the advices.
    best regds
    Subha

  • F110 - Automatic Payment Transactions Issue

    Hi,
    I am working on the report program and SAPscript used in the transaction F110 - Printout/data medium.
    I have maintained the program and the form to be used to print the "Payment Advice" in the FBZP transaction.
    When i try to schedule the job, the prompts a message stating the job was scheduled, but when i check in the SP01 transaction no record is found.
    Can anybody please advice me what I am missing and also how can I check which form is being called? I tried to debug without
    but in vain.
    Kindly help.
    Regards
    s@k

    Dear Chintan,
    Thanks a lot for the response...:)
    In tcode SM37 i was able to locate where the problem was.
    Now I have another question...:)
    In my payment advice, for the time being, i am just printing the footer(for testing purpose). But when i check the Payment advice in SP01, the message states that the spool request is empty.
    Is it like the form created by me is not called? As i stated in my previous post, i have tried to debug but in vain...
    Can you please guide me on this?
    Regards
    s@k

Maybe you are looking for