Payment term net due date as 15th of month

Hi Tea,
I have created a payment term Z005 for net due date is 15th of the month, while doing testing I found that it's calculating wrongly, while posting the invoice I have given the document date as 10th of April, for this net due date is calculating as 15 of April, it's correct if i give the document date as 18th of April, for this also system is calculating the net due date as 15th of April it's wrong, it should calculate as 15th of may.
Can you please help me to fix this one?
Thanks
Nenu

Hi Nenu
You should use day limit in term of payment.
As per your concern bill enter upto 14th of the month net due date will be 15th of the month, and bill enter between 15th to 30th, due date will be 15th of next month.
T Code - OBB8
New entry -
pmt term - Z005
Day limit - 14
Fixed Day - 15
save
back
New entry
Pmt term - Z005
Day limit - 31
Fixed day - 15
Additional months - 1
Save
Thanks
Nakula Das

Similar Messages

  • Payment terms - net due date same as credit days?

    Dear all,
    I need to set up a payment term with 20 credit days, 2%. Invoices should be due also after 20 days.
    I would like the payment term to be set up as follow:
    Term           Percentage           No of days
    1.                2                           20
    2.                                             20
    The problem is that the system doesn't let me to set due date to the same number of days as the credit days.
    We will have baseline date = invoice date for our payment terms, if that matters.
    How could I acheive to have due date 20 days after invoice date (baseline date) and deduct 2% cash discount the whole time?
    Thanks and regards,
    Helene

    Hi,
    Please create a payment term as below, if your requirement is "I need to set up a payment term with 20 credit days, 2%. Invoices should be due also after 20 days"
    Term           Percentage           No of days
    1.                2                           20
    2.                                             21
    In case your requirement is to give 2% discount if paid within 20days and due net after that:
    Term           Percentage           No of days
    1.                2                           19
    2.                                             20
    Hope this will solve your issue.
    Thanks,
    Kiran Yelamarthi

  • Question about Payment term and due date

    Hi experts,
         I encouter a question about payment term:
    I have the payment term ,the baseline date,document date and posting date.How can I get the due date??Is any SAP function module can calculate the due date?
    Thanks a lot in advance.
    Villy.Lv.

    Hi guys,
       we can use this FM FI_TERMS_OF_PAYMENT_PROPOSE to get the Days for net due date and add it to base line date,then we get the due date.
    BR and thanks a lot.
    Villy.Lv.

  • Payment Terms, Invoice Due Date

    Hi,
    I've got to set up a new payment term in our system. The requirement for this payment term is:
    A)     The invoice due date is either, whichever is the later of:
    i)     The 12th day after the day on which the invoice document was deemed to be received : and
    ii)     The 20th day after the last day of the billing period to which the invoice document relates.
    I don't know how to configure this, can anybody help?
    John

    Hi,
    do you mean net due date or document date In order to have days after?
    you can do it defining in OBB8 baseline date (document date) and No. of days (12th and 20th)
    Let me know if it is your case
    regards

  • How to define payment term - Net due 45 days after month end

    Anyone have experience of payment terms such as "Net Due 45 days after Month End"?
    I'm trying to define payment terms where the amount is due X days after month end.
    Terms such as 10 days after month end are OK because I can set "Months Ahead" = 1 and "Day of Month" = 10
    However, I can't exceed a value of 31 in the "Day on Month" field. I could assume that a month is 31 days and therefore set "Months Ahead" =1 and "Day of Month" = 14. However, this won't always be true (depending on the month) and it will impact aging buckets.
    Anyone encountered this before? (These payment terms seem to common in France and Denmark)

    Hi Supriya,
    In OBB8, create a new payment term with the following settings -
    Default for baseline date = No default
    Payment terms/Term 1/Fixed date = 1
    Payment terms/Term 1/Additional months = 2
    This payment term will ask you for a baseline date on document entry. You can give the delivery date as the baseline date. If required, this date can be changed after posting the document also.
    Hope this helps.
    Regards,
    Mike

  • AR Payment Terms/Invoice Due Dates

    I need to be able to have a search that can search for invoices that have a specific payment term and are due within a certain period of time. (ex: all invoices with Net 30 payment terms that are due within the next two weeks). I have tried the collections>account details screen but there is no criteria for payment terms. Any suggestions would be greatly appreciated.

    You probably don't want to change the payment terms on existing invoices, unless there was a effective change date that was missed for changing the payment terms. You would have sent the invoice to the customer with the original terms and they would have entered it into their system with those terms. So not only would you have to change the due dates manually on your system, you would have to notify the customer somehow of these changes. That is why it normally is easier not to worry about existing invoices and just let the payment terms start showing on new invoices. Makes any sense?
    John Dickey

  • Instalment payment terms and Due date

    Hello
    Can i have some comments on how the due date will be calculated in case of instalment payment terms.what is the configuration needed.Can we get the discount for each instalment if we pay in advance i.e before the due date.
    with regds
    RAJA

    Installment payment terms is basically one payment term linked to other paymnet term(s).
    If you split it to 3 lines, each of the 3 lines will get the payment term assigned for that line.
    E.g. you will configure as follows: (obb9)
    Inst Pmt Term  Inst     %       Payment term
    0001                  1     20              AAAA
    0001                  2     30              BBBB
    0001                  3     50              CCCC
    If you post an invoice (of say 1000) with the pmt term 1, it will split to 3 lines
    Line         Amt            Pmt term
    1             200                AAAA
    2             300                BBBB
    3             500                CCCC
    All the terms created for AAAA BBBB CCCC will apply to these lines.
    Praveen.

  • Payment terms and Due date field gets emptied after residual clearing

    Hi
    There is advance of Rs.50000 in Vendor ledger and Invoice of Rs.200000 (with payment term - G019)
    I cleared these two line items (residual clearing). One new line item got created of Rs.150000. When i saw that line item, i saw that there payment term field and due date field got emptied. My requirement is that the original payment term entered in initial invoice document (of Rs.200000) should automatically get populated in new line item of Rs.150000.
    How to fulfill this requirement?

    Thanks for the prompt reply.
    I wanted to ask one more thing. Same way when i do partial clearing (not residual), is it possible to populate the invoice's due date in advance line item. One link is that my invoice reference gets populated advance line item. So i want due date (not payment term) also to get populated in advance line item.
    Please help.
    Edited by: Deepak Agrawal on Jul 29, 2011 11:43 AM

  • Payment Terms-Manual due date Input-Which field?

    Dear Gurus,
    I can observe an option at the payment terms of "no default" which means that payment due date has to be entered manually.Is there some field in the order or billing document where the due date can be entered manually.Kindly hep,thank you.
    Regards,
    Sam Ahmed

    Hi
    By making due date manual you want to give a free hand to end user for entering any date as due date. He might enter 30 days or 300 days and this is the reason payment terms are used. I don't know about your business scenario but in most of the cases due date is determined from payment terms.
    If you want to make it manual then you can enter payment term with pay immediate and enter date in Fixed value date as suggested by Ravin or enter days in add value days field. System will take this date as billing date for accounting document and will calculate payment term days from here and if you payment term is pay immediate then this would be your due date as well.
    Thank$

  • Payment Terms (Fixed Due Date)

    Hi All,
    I have a requirement where in I need to set up a new Payment term 123 as an installement payment term.
    The payment term is divided as follows:
    Payment Term A: 25% (Due Immediately)
    Payment Term B: 25% (Payable on May 30)
    Payment Term C: 25% (Payable on June 30 => Baseline date calculation: Fixed day: 30 additional months:1)
    Payment Term D: 25% (Payable on October 30 => Baseline date calculation: Fixed day: 30 additional months: 5)
    Now the above can we achieved by creating a condition type (VK11) and adding the Main Payment Term 123 in that condition type with a fixed due date.
    Then corresponding payment terms B,C and D can be set according to the fixed due date(mentioned in condition type) in OBB8
    But how do I capture the payment term A since it will be on the basis of Billing date and not fixed due date mentioned in condition type.
    Also, please suggest an alternate approach in setting up the above payment term 123 and if any ABAP effort is also required.
    Thanks,
    Aruna

    HI,
    You can use the custom development for it:-
    (A) For FI Documents:-
    Use FI Substitution in OBBH with exit.
    For field day1 (BSEG-ZBD1T) and baseline date (BSEG-ZFBDT). Here check the baseline date for October?
    Your ABAPer can code this.
    (B)For SD Documents:-
    Use user exit EXIT_SAPLV60B_008.
    This exit has table ACCIT which also has same fields Day1 and Baseline date. Follow same logic mentioned above.
    Regards,
    Gaurav

  • Defaulting Payment Term & Determining due date

    Dear All,
    We are using the substituions to default the payment term to ZS28 for document type ZO.
    In the transaction FB60 after entering the document date and other details, If I click on the payment tab the payment term is being populated correctly as ZS28. But the no of days and due date are being populated incorrectly.
    I am trying to update the field BSEG-ZBD1T in user exit of the substitution, but this values is being overwritten before displaying in no of days.
    For example I'm having base line date as: 03.08.2011
    I am setting the field BSEG-ZBD1T = 25 in user exit, and I have to get the due date as 28.08.2011.
    But the field BSEG-ZBD1T is modifed to 1 by the program and due date is displayed as 04.08.2011.
    Please help me to get the correct due date and no of days.
    Regards
    Rakesh

    Hi All,
    After updating the value in user exit, the value of the field BSEG-ZBD1T is being modified by the form 'EXP_TAB_009_BSEG' in program 'GBTAKFI0' .
    Because of this I'm unabel to claculate the actual due date. Pls help on this.
    Regards
    Rakesh

  • Sales Credit Memos, Payment terms and due date for payment

    Hello all,
    does anyone out there know how to get the terms of payment assigned to sales credit memos taken into account when the due date for payment is calculated in the accounting document?  (I know this is a bit puzzling as why should one need payment terms for a credit memo)
    I have looked at SAP notes 17410 et al..but remain unclear re how 'V' is populated in BSEG-REBZG.

    Number of the Invoice the Transaction Belongs to
    For line items which are related to another line item, this field contains the number of the partner document.
    Use
    In the standard system the field is used for:
    o   Credit memos which refer to a particular invoice item
    o   Subsequent invoices for an invoice item
    o   Partial payments for an invoice item
    o   Partial clearings of down payments.
    In the first two cases mentioned, the terms of payment are copied from the cross-referenced invoice item into the item currently being processed. This ensures that items due on the same date are paid together by automatic payment.
    A special rule applies to credit memos which have a "V" in this field.  The due date is determined in the same way as for an invoice. If the field is empty (containing neither a document number nor a "V") the due date is the baseline date for payment.

  • Printing of Net Due date in report output

    hi Guru's,
    I have to print the net due date which is printed in fbl1n, but the problem is the field FAEDT is comming from the structure and i am not able to print it.
    The process is like this
        Base line date + Payment Term = Net due date.
        here the Payment Term is maintained in SAP code so how can i convert this so that i can do the above calculation.
    Payment terms like (Z001,Z002,Z003) etc.
    urgent.
    regards
    syama
    Edited by: syama sundar on Aug 11, 2008 10:48 AM

    hi,
    see:
    Link: [https://forums.sdn.sap.com/click.jspa?searchID=15042090&messageID=5792271]

  • F110 payment only possible 8 days after net due date, why?

    Hi all,
    When we try to post a payment in F110 by choosing a next p/date as for example 24 April all invoices with net due date up to that date will be included. In payment proposal only invoices with net due date up to 15 April is included, not invoices with net due date 16 April and after. There is something with a tolerance of 8 days but I don´t know where this configuration is set. Payment terms is 30 days net and there I can´t find anything about any tolerance days and i can´t find anything in FBZP either. Does anyone know where I can find these days set?
    We want to create the payment per net due date. We don´t work with payment order.
    BR L

    Hi,
    Check in transaction code FBZP, all company codes. Double click on the company code, you will the find the tolerance days for payable.
    Thanks
    Aravind

  • New payment terms with Due December 15th 2011

    Dear All,
    My business requirement is to create new payment terms with due date upto December 15th 2011 from the using of that payment terms,
    Please suggest the step by step to create this kind of payment terms,
    Thanks in advance,
    Sridhar

    Dear Sridhar Alleni,
    For your requirement, i strongly feel that we will have to use more than one payment term.
    Make following payment terms
    (CLICK ON NEW ENTRIES OR COPY EXISTING PAYMENT TERMS AND MAINTAIN THE SETTINGS AS MENTIONED BELOW.)
    PAYMENT TERM Z001 -  DESCRIPTION : JULY TO DEC
    Baseline calculation date
    Fixed day : 15
    Additional months : 5
    Z002 - AUG TO DEC
    Baseline calculation date
    Fixed day : 15
    Additional months : 4
    Z003 - SEPT TO DEC
    Baseline calculation date
    Fixed day : 15
    Additional months : 3
    Z004 - OCT TO DEC
    Baseline calculation date
    Fixed day : 15
    Additional months : 2
    Z005 - NOV TO DEC
    Baseline calculation date
    Fixed day : 15
    Additional months : 1
    Z006 - DEC TO DEC MID
    Baseline calculation date
    Fixed day : 15
    Additional months : 0
    Instruct the users/business to use the corresponding payment term during each month.
    i.e, If its oct month, ask them to use Z004 and likewise.
    Please check and revert back.
    Also if you are able to solve this in someother way, please update.
    Thanks & Regards,
    Hegal K Charles

Maybe you are looking for

  • How do I get rid of Firefox as its awfully slow and has lost all my favourites which are not in the unsorted bookmarks file?

    I was told by eBay to set up Mozilla Firefox as I had problems uploading scans on to listings. I now find I have lost all my favourites and there is nothing in the unsorted bookmarks, where you told me they would be. Also it has slowed down my comput

  • Error in  Backups custom configuration

    Hello I'm doing a backup of portfolio 's configuration in portal.Then I found the steps for this task: You navigate to this iView by choosing Portfolio Management ® Administration. In the navigation panel, choose Backup Custom Configurations. To back

  • Search in an array of cluster

    Hi! Is there a smart way to search in an array of clusters. For example: You have an array of a cluster with a digital control and a string control. And you want to search for a specific value in the digital control. What is the best way to that? Is

  • Applying Oracle 11g patches on Windows 2008

    I'm not able to apply patches and below is the messages. Please help me. Thanks, C:\oracle\SLM\112\OPatch> %ORACLE_HOME%\OPatch\opatch apply Z:\Oracle_Patches\12714463 ======================================================== GENERIC OPATCH VERSION -

  • Page to print,Size option

    In the print in Html Javascript is particular; can set it, or please tell me the possibility what kind of property there is.         document.getElementById('objPDF'). src = "" http://xxxx/xxxx.pdf;         document.getElementById('objPDF'). PrintAll