Payment Terms: 50% advance, 50% after 30 days

Hi,
How to create a payment term for vendor?
Payment Term: 50% advance, 50% after 30 days
Regards,

Hi,
For example:
Create payment term: P001 & Explanations of payment term: 50% advance & 50% after 30days
& In details of payment term P001 in u201CPayment termu201D segment, you can enter your requirement.
Regards,
Biju K

Similar Messages

  • Payment Term for advance payment

    Hi
    Can we configure a payment term for advance payment thro OBB8. it says that customer needs to pay us in advance.
    If yes, how do we configure this.

    the accounting document is created after a delivery for a customer invoice via billing.
    i believe there is an option in SD where you have an extra tab for payment. Once the payment has been received, i.e. entered into the sales order, the delivery can be made.
    This should work for your process, however best to speak to a SD consultant to get the full picture.
    Hope this helps, assign points and mark thread as answered if it does!!!

  • How to Create payment term for -Net Due 1st Day of Second Month Following

    Hi,
    We need to add a payment term for "Net Due 1st Day of Second Month Following Delivery". We need this to be in the system as soon as possible as we just were told of a change in terms for our client effective May 1st.
    Kindly advice me how to select the dates in OBB8?
    Thanks
    Supriya

    Hi Supriya,
    In OBB8, create a new payment term with the following settings -
    Default for baseline date = No default
    Payment terms/Term 1/Fixed date = 1
    Payment terms/Term 1/Additional months = 2
    This payment term will ask you for a baseline date on document entry. You can give the delivery date as the baseline date. If required, this date can be changed after posting the document also.
    Hope this helps.
    Regards,
    Mike

  • Payment terms in OBB8 with 50 days with two day of payment.

    Hi Experts,
    We need some helpu2026. We have to create a payment terms in OBB8 with 50 days with two day of payment, day 05 and 20.
    Requisites:
    If the bill expire date is between the days 01 and 15 from month X, the pay is realized the day 05 from month X.
    If the bill expire date is between the days 16 and 31 from month X, the pay is realized the day 20 from month X.
    Any idea
    Best Regards,
    Driss,

    Hello Driss
    In the payment terms , where you define cash discounts .
    You can configure the requirement you specified .
    Maintain as follows :
    Term ,    Percentage     ,        No.of days      ,     Fixed date   ,   Additional month
    1         ,       0.00%            ,        15              ,            05           ,           0
    2         ,       0.00%            ,       31                 ,         20             ,         0
    I think this should work fine
    Let me know if this is ok
    Ravindra Kumar

  • Payment Term-50% adv 50% after 30 days of delvry

    Hello
    I am required to create a payment terms as follows:
    50% advance,50% after 30 days of delivery.
    How can I create this, pl. help me to do.

    HI,
    If you know the shipment date you can mention shipment date as either doc date or posting date, I guess in maximum scenarios no body knows exact shipment date.
    so you can create " L/C 90 days from shipment date", this is only for identification purpose. system wont calculate anything.
    thansk & regards,
    shashi kanth

  • Payment term: 60% prepayment + 40% after 30 days invoice date? Possible?

    Hello,
    I was wondering if we could split a payment term in SAP?
    I would like to create the following payment term (100%):
    60% prepayment
    40% after 30 days invoice date
    Is that possible? Does anyone know if I can create that?
    Thanks in advance.
    Kind regards,
    Pamela

    hello,
    in customising for customers and vendors you create a payment term for installment payments,
    the first installment will be 60 % with immediatlly  due payment term
    and  the 2. installment will have 40% after 30 days net on the basis of invoice date as peyment term.
    Create first the payment term for that and then go to the next cusom. step and enter the installment percentages.
    If useful reward appreciated.
    BR tarik

  • PO with payment terms as Advance only

    Dear Freinds,
    Can we create a po which talks about payment terms as below.
    1) <u><b>50% advance pymnt.</b></u>
    2) Bal 50% after delivery of material.
                                       <u><b>OR</b></u>
    Can we create a po which talks about payment terms as below.
    1) <u><b>100% advance pymnt.</b></u>
    I am trying to create a Workflow for Vendor advance payment if below conditions are met
    A) verification of payment terms,     
    B) <u><b>payment terms should be advance only     </b></u>
    C) po should be in released status,     
    D) po should be open, not closed (where po qty=grnqty)
    Thnks
    Vinod

    You could set up those as payment terms and block payments. Then you would use Down Payments F-47 to request the down payment. Then have this paid in your check run. You'll modify config to allow down payments in the check run. Then you run clearing to offset the down payments made aginst the final invoice.
    pls assign points to say thansk.

  • Payment terms for Advances in Sales & Distribution

    Hi friends !!
    1)You may know that we have payment terms like eg: 30% advance and remaining payment after delivery.
    In such scenario, while doing sales order itself the customer need to pay the advance. Then he needs acknowledgement or bill for that amount. How and where we will configure that???
    2)If the advance amount recieved at sales order level do we need to issue the invoice for the full amount or for the balance amount??
    Please any one help me to understand the logic !!
    Thanks & Regards,
    Sreedhar.
    Email: [email protected]

    hi,
    If it is real-estate based one plz follow the following procedurs:
    You have to define conditions for sales-based rent in order to be able to post sales-based rent. Also, if advance payments were made for sales-based rent or a minimum sales-based rent is defined, conditions allow you to offset these against the sales-based rent to be paid.
    Prerequisites
    You defined the necessary condition types in Customizing and assigned them attributes for sales-based rent. In Customizing choose:
    SAP Customizing Implementation Guide - Flexible Real Estate Management - Conditions and Flows - Condition Types
    You set the Relevant to Sales indicator on the General Data tab page in the real estate contract.
    Procedure
           1.      On the Conditions tab page, assign the necessary conditions to the contract. The following condition types are relevant for sales-based rent settlement:
    ·        Advance Payment for Sales-Based Rent
    One-time or recurring condition for sales-based rent; requires actual rent as condition purpose. Advance payments made by the tenant are offset against the sales-based rent resulting from the sales-based rent agreement.
    ·        Minimum Rent
    Minimum amount of sales-based rent to be paid. This is usually a condition with the condition purpose actual rent, but can also be used as a statistical condition.
    ·        Maximum Rent
    Maximum amount of sales-based rent to be paid (cap). Maximum rent is usually represented by one or more statistical conditions. The maximum amount is the sum of the conditions, limited to the given settlement period.
    ·        Sales-Based Rent (Required for Every Sales Rule)
    This condition defines how the receivable or credit memo is posted. It is not possible to assign a unit price to this condition, since the posting amount is determined by the sales-based rent settlement. The calculation formula always has to be sales-based rent (see: Customizing settings). The system generates a cash flow item for the posting that reflects the posting period and settlement period. For this reason, you do not enter a frequency for this condition. Instead, it is defined as a one-time condition.
    The Sales-Based Rent condition is also used to specify which objects of the sales-based rent agreement form the basis for sales-based rent. This makes it possible to determine sales-based rent using measurements as a basis (for example, per square foot of retail space). If the condition has a distribution rule, then sales are distributed to the objects using this rule.
    Note that the system uses only the last distribution formula in the settlement period. The system does not distribute proportionally within the settlement period if there is a change to the distribution formula.
           2.      On the Terms subtab, assign the same sales rule to all advance payment conditions for sales-based rent, to all minimum sales-based rent conditions, and to just one Sales-Based Rent condition.
    You have to assign a single Sales-Based Rent condition to each sales rule.
    If a contract contains more than one sales rule, you have to assign that number of Sales-Based Rent conditions in order to be able to perform settlement. You cannot use advance payments or minimum sales-based rent conditions for settlement. You can assign a sales rule to from zero to any number of advance payments and to from zero to any number of minimum sales-based rent conditions.
    regards,
    Siddharh.

  • Payment terms for advance payment scenario

    Dear All
    payment terms have to create like we have to pay as 50% advance against order & balance 50% against on proforma invoice.
    Can any one tell me is it possible to define payment terms like this or only option is downpayment configuration.
    Thanks & Regards.
    Lakshmi

    Hello,
    In SD there can be 2 ways by which you can handle this.
    A. Billing Plan
    Maintain 2 milestones at the sales order.
    1. one milestone with Terms of payment Z002-50% advance against order
    2. other milestone with another terms of payment Z003- 50% against on proforma invoice
    B. relevant terms of payment
    In OBB8 maintain 3 payment terms, say
    - Z001 50% advance against order & balance 50% against on proforma invoice (in payment terms section - tick Installment payment).
    - Z002-50% advance against order
    - Z003- 50% against on proforma invoice
    Then in OBB9,
    Z001___1___50.000___Z002
    Z001___2___50.000___Z003
    With this when you post billing doc you accounts, then you will find 2 line items(50 % Value each) in Customer account.
    i hope this can assist you.
    Thanks & Regards
    JP

  • Payment terms to be change after MIRO.

    Hi SAP Expert,
    We are working on SAP ECC 6.0 Ver.
    I wanted to change Terms of Payment once Invoice Reciept has been created.
    In SAP ECC 5.0 Ver. terms of payment can be change in Vendor leadger FBL1n but in  SAP ECC 6.0 Ver. that option is not available. Initially I thought of Authorization problem but I have chekced Basis consultnat, SAP ECC 6.0 Ver. option is not available is not available to change Terms of Payment in Vendor Leadger FBL1n.
    Dears please let me know where Terms of payment can be change so that it will be effective after MIRO subsequent transaction.
    With Regards
    Manoj Singh

    Hi Expert,
    Problem has been resolved.
    1. FS00( put the G/L no.)and try to find out the field status group of G/L.
    2. OBC4--> Select your field staus group and click detail.
    In payment Transaction screen change the payment terms from suppres to optional nad save it.
    3. FBL1n--> Select the open line item & click changes document option, now the system will dispaly the Terms of payment field in Addition data screen.
    thank you..
    Manoj Singh

  • Default the payment terms for customer to 30 days

    In the system, payment term R30 is 30 days.
    How can I configure it to be defaulted to R30 each time a new customer is created in XD01.
    Please advice,

    Hi Colin,
    If you create a transaction variant (this defines how the fields on the screen appear, including default values and dsiplay vs update vs input fields); and then assign this transaction variant to a variant transaction (a new T-code e.g. ZXD01); you can then have the users use the z-transaction instead of the standard transaction and the value will be defaulted.  This takes about an hour to create in your development system, and is then transportable.
    Regards,
    Robyn

  • How to get PO and vendor payment term number of days??

    Hi Experts,
    I want to have a) Purchase order payment term number of days as well as
    b) vendor Payment term number of days.
    For  a) For  Purchase order payment term number of days I am using table EKKO and taking ZBD1T field which is giving payment
               term number of days.
              Is it correct??
          b) vendor Payment term number of days I am using table LFB1 field Zterm to take payment term key not number of days.
               Based on this key i will go to table T052 and find corresponding number of days as told MM consultants .
               But this is not BW work. We need one single table from which we can take the field or enhance the current extractor
              with that field.
    So is there any other option for (b)
    and Whether steps for (a) is correct???
    Please confirm this.
    Thanks in Advance,
    Uday Shankar.

    For a) For Purchase order payment term number of days I am using table EKKO and taking ZBD1T field which is giving payment
    term number of days.
    Is it correct??
    Payment terms for purchasing doesn't come delivered as part of the R3/ECC tables and is usually is added as a custom field to EKKO and populated via a User Exit. That looks to be the instance in your case because the field that you show as being the payment terms begins with a Z (custom fields begin with Y or Z). That appears, without being able to actually validate in your R3/ECC environment, to be the correct field to use. You would have to validate, however, with the end customer or your MM function consultant to be 100% certain. If this is the correct one to use, you're going to have to enhance the 2LIS_02_HDR extractor by enhancing the extraction structure and creating the User Exit to read it from EKKO and populate into the DataSource.
    b) vendor Payment term number of days I am using table LFB1 field Zterm to take payment term key not number of days.
    Based on this key i will go to table T052 and find corresponding number of days as told MM consultants .
    But this is not BW work. We need one single table from which we can take the field or enhance the current extractor
    with that field.
    You can enhance the 2LIS_02_HDR extractor with the Vendor Payment Terms by joining the following in your User Exit:
    EKKO-LIFNR = LFB1-LIFNR
    EKKO-BUKRS = LFB1-BUKRS
    LFB1-ZTERM = T052-ZTERM
    This could either be done in a SELECT statement in the User Exit to do this equi join, or you could create a view on your R3/ECC environment and SELECT from that view.

  • Sales order block for MRP run when the Customer payment terms is in Advance

    My client needs to block some sales order for MRP which customer payment term is advance. But it should be based on the customer payments terms (In case of Advance). After getting his advance amount, we would be release it and it also be consider for MRP.
    Option 1.Status profile  this concept is will controlled by sales document controls VOV8 not by customer's payment term Advance
    Option  2: In CMR sales area Billing Document tab  by using payment guarantee procedure and in VOV8 in billing tab Payment guaramtee procedure by using this setting , i am getting a pop up message" No Finanical document assigned" in sales order when u try to save. Now sales order is blocked for delivery but not MRP run.
    i am to ask the abaper to develop "here in the information box we will maintained required text say example u201C customeru2019s Payment term is in advance please check the reason for rejection number u201Csay ex: 13u201D: advance " after this is happen go to change mode of sales order put reason for rejecation" now MRP run will not generate the requirement for the sales order.
    for Undo these this flow :
    Va02 : remove the reason for rejection keep it in Blank
    VKM3 : release the sales order.
    Options 3: Development 
    Kindly suggest me the second options is only alternative for solving this issue but really i m not used specific feilds to solving this issue.

    Cleint is not using the field  in CMR Payment granatee , i gone for user-exit and closed this issue

  • Payment Terms in Vendor Advance payment & automatic set off aganist invoice

    Dear Team,
    As on 01.08.2014 there is advance payment made to vendor is Rs.10000 and the payment terms in vendor master 30 days and as on 16.08.2014 the vendor invoice has been raised for Rs.15000/- and the payment terms is same 30 days. According to the payment terms in the vendor invoice the net due date is calculated as 15.09.2014. Since already the advance payment is rs.10000 then how we can tel the system to consider this also and then calcuate net due date for the invoice raised as on 16.08.2014. Please suggest.
    We suggested client to enter manually 0000 payment terms at the time of invoice. But they are not convinced.
    Kindly check & do the needful
    Regards,
    Babu.

    Hi Babu,
    You have to clear the advance through F-54 and here you have to provide the invoice doc.no. under the relevant invoice-invoice. Then system will consider net due date of invoice for advance also.  I have attached screen shot for your reference.
    Regards,
    Mukthar

  • Payment Term - Advance & Retention

    We have a requirement.  We need to define a payment term as follows:
    5% Advance, 90% Payment, 5% Retention
    In the above case, should I define it as an installment term with 5%, 90%, 5% slabs ?  Please advise what is normally done for this type of payment terms.

    I want to create a payment term as follows:
    100%, 45 Days on Invoice Date.
    I created a payment term and put 45 days in the 'fixed day' field in the "Base line date calculation" column.  However, while posting an invoice, the system is not calculating the 45 days for the due date from the invoice posting date.  I am expecting that if an invoice is posted on 1.10.2011, the invoice due date should be 15.11.2011.  But the base line date is displayed as 01.10.2011 ony.  Am I doing the setting correctly ?

Maybe you are looking for