Payroll Journal in a single line

Hi Experts,
My client requirement is that all the payments n deductions need to come in a single line for every employee in the form of a report. Is there a solution for this ??
Plz help.
Thanks & Rgds,
Vishwas

Hi
You can go for a custom to get the data in a single like per employee. All you need to allign which wagetypes to be called after which line of the table as required.
Brs
Kenu.

Similar Messages

Is it possible multiple line items debit & single line item credit and different cost centers and different profit centers in fbcj

Hi all ,
I have a requirement to Post Cash Journal Document using FBCJ tcode.
Is it possible multiple line items debit & single line item credit and different cost centers and different profit centers
for exp:
pk   GL a/c   description       amount   cost center profit center
40 400101 telephone exp   500        1403            P 1000
40 400101 telephone exp    100       1404            P 2000
50 200100 cash in hand      600-
   This is My requirement is it possible in fbcj
    Please suggest me.ASAP.
Regards
   Naresh.

Hi,
This you can do it in two ways:
1. Make three header under top level....one Product A, 2nd Product B ( as Billing element) and third as Common expense ( only cost). Now 1st & 2 nd WBS, you have to have sales order linking with individual lint item, for third you will accumulate all the common expense till the period end then make a reposting of the same in desired proportion to both products WBS hierarchy
(This is if you want to have a track on the common expense as well.......like planning, budgeting & control)
After this reposting, run RA for individual billing element and hence you will all the complement detailing and control over Revenue and expense with respect to Product A and Product B individually.
2. If you don't want to maintain that kind of detailing the common expense and keep track of it through project, then have cost centers accordingly and make an assesment/ distribution with respect to expenses accumulated at those cost centers for the period to the respective WBS under each product. Then execute the period end processes for the project.
Or
You can try with have two more line items in the costing sheet as an overhead against common expenses with respect each product.
I hope this should help you.
Regards
Avisek Bhardwaj

ICal only displays a single line for entries in month view.

This means I can't see what my diary entries refer to. Can I change it to show two lines or the full entry, as iCal did in Snow Leopard?

Hi Guys, thanks for getting back to me.
the problem is purely about design view display and not about coding.
Below is how CS4 displays borders with two lines which I find difficult to decipher:
Then below is Macromedia DM 8 and this how I want the borders to look, with single lines to display the tables.
This may just be the way Abobe have decided to display tables in design view and there may not be any option to change it but if you know any way to change it I would be most greatful.
Thanks again.
G

Concatenate 2 data fields and put values in single line

Hello,
I am pretty new to BI Publisher. I want to concatenate 2 data fields (Product and ProductType). These concatenated values then I want to put them on a single line.
eg.
the values should look like
ProductType1.Product1,ProductType2.Product2, ProductType3.Product3..........
Thanks.

The XML is
- <ServiceAgreement>
<AccountId>1-abcde</AccountId>
<AgreementNumber>1-685</AgreementNumber>
<AgreementStartDate>07/08/2010 13:46:18</AgreementStartDate>
<AgreementStatus>Awaiting</AgreementStatus>
<ContactFirstName />
<ITIStreetAddress />
<ITIStreetNumber />
- <ListOfOrderEntry-Orders>
- <OrderEntry-Orders>
<ITIMoneyToCollect />
<OrderDate>07/08/2010 13:46:53</OrderDate>
<OrderNumber2>1-685579</OrderNumber2>
<OrderStatus>Pending</OrderStatus>
<OrderType>Sales Order</OrderType>
- <ListOfOrderEntry-LineItems>
- <OrderEntry-LineItems>
<OrderType2>Sales Order</OrderType2>
<ProdPromName />
<Product>Hollywood 18m</Product>
<ProductType />
<PromotionId>123456</PromotionId>
<ServiceId />
</OrderEntry-LineItems>
- <OrderEntry-LineItems>
<OrderType2>Sales Order</OrderType2>
<ProdPromName>Hollywood 18m</ProdPromName>
<Product>n TV</Product>
<ProductType>Root</ProductType>
<PromotionId />
<ServiceId />
</OrderEntry-LineItems>
- <OrderEntry-LineItems>
<OrderType2>Sales Order</OrderType2>
<ProdPromName />
<Product>HBO + nFilmHD</Product>
<ProductType />
<PromotionId />
<ServiceId />
</OrderEntry-LineItems>
- <OrderEntry-LineItems>
<OrderType2>Sales Order</OrderType2>
<ProdPromName />
<Product>HBO</Product>
<ProductType>Opcje dodatkowe</ProductType>
<PromotionId />
<ServiceId />
</OrderEntry-LineItems>
- <OrderEntry-LineItems>
<OrderType2>Sales Order</OrderType2>
<ProdPromName />
<Product>nFilmHD</Product>
<ProductType>Opcje dodatkowe</ProductType>
<PromotionId />
<ServiceId />
</OrderEntry-LineItems>
- <OrderEntry-LineItems>
<OrderType2>Sales Order</OrderType2>
<ProdPromName />
<Product>nbox HDTV</Product>
<ProductType>Dekoder</ProductType>
<PromotionId />
<ServiceId />
</OrderEntry-LineItems>
- <OrderEntry-LineItems>
<OrderType2>Sales Order</OrderType2>
<ProdPromName />
<Product>Cinemax</Product>
<ProductType>Opcje dodatkowe</ProductType>
<PromotionId />
<ServiceId />
</OrderEntry-LineItems>
- <OrderEntry-LineItems>
<OrderType2>Sales Order</OrderType2>
<ProdPromName />
<Product>Filmbox</Product>
<ProductType>Opcje dodatkowe</ProductType>
<PromotionId />
<ServiceId />
</OrderEntry-LineItems>
- <OrderEntry-LineItems>
<OrderType2>Sales Order</OrderType2>
<ProdPromName />
<Product>Upust za zakup 3-ego pakietu</Product>
<ProductType>Upusty</ProductType>
<PromotionId />
<ServiceId />
</OrderEntry-LineItems>
- <OrderEntry-LineItems>
<OrderType2>Sales Order</OrderType2>
<ProdPromName />
<Product>Pakiet Informacja i Rozrywka</Product>
<ProductType>Pakiety</ProductType>
<PromotionId />
<ServiceId />
</OrderEntry-LineItems>
- <OrderEntry-LineItems>
<OrderType2>Sales Order</OrderType2>
<ProdPromName />
<Product>Opłata aktywacyjna za nbox HDTV</Product>
<ProductType />
<PromotionId />
<ServiceId />
</OrderEntry-LineItems>
- <OrderEntry-LineItems>
<OrderType2>Sales Order</OrderType2>
<ProdPromName />
<Product>Pakiet Dzieci</Product>
<ProductType>Pakiety</ProductType>
<PromotionId />
<ServiceId />
</OrderEntry-LineItems>
- <OrderEntry-LineItems>
<OrderType2>Sales Order</OrderType2>
<ProdPromName />
<Product>Pakiet Sport i Motoryzacja</Product>
<ProductType>Pakiety</ProductType>
<PromotionId />
<ServiceId />
</OrderEntry-LineItems>
</ListOfOrderEntry-LineItems>
</OrderEntry-Orders>
</ListOfOrderEntry-Orders>
</ServiceAgreement>
</ListOfBipServiceAgreement>
As per the above XML I want to see
Pakiet Dzieci.Pakiety , Pakiet Sport i Motoryzac ja.Pakiety.....
Thanks

Converted single line text to multiple and want to have rich text editing in layout

We had a text field in a site that was initially set as single line of text. We needed it to be bigger and also allow formatting. So I added the field into the page layout.
Changing
<SharePointWebControls:TextField id="habitat" FieldName="Habitat" runat="server"/>
to
<SharePointWebControls:NoteField id="habitat" FieldName="Habitat" runat="server"/>
But it doesn't show any rich text editing options and displays the full html tags in the field.
If I open the page in the edit properties screen instead, then the field displays as I want it with the rich text editing options available in the ribbon, and text showing as bolded instead of like this:
<div>This is <strong>the </strong>habitat field.</div>
This is a site using the 2010 Publishing template running in compatibility mode on a 2013 server.
How can I get my page layout to behave the same way as the edit properties screen does?

Hi,
Here are two solutions for your reference:
1. We can use the InputFormTextBox control to achieve it.
<SharePoint:InputFormTextBox ID="habitat" RichText="true" RichTextMode="FullHtml" runat="server" TextMode="MultiLine" Rows="20"></SharePoint:InputFormTextBox>
http://blog.qumsieh.ca/2009/01/13/how-to-add-a-rich-text-editor-to-your-custom-application-pages-or-web-parts/
http://blog.mastykarz.nl/rich-text-editor-control-sharepoint-2010/
2. We can use the RichHtmlField control to achieve it.
<PublishingWebControls:RichHtmlField id="habitat" FieldName="Habitat" runat="server"/>
http://msdn.microsoft.com/en-us/library/office/ms561507(v=office.14).aspx
Best Regards
Dennis Guo
TechNet Community Support

Can the Terminal add a user(with all options) on a single line?

Howdy All,
Can the Mac Terminal add a user, with all options desired, on a single line?    If so, can I get an example of this single terminal line to work from?
Thanks

Thanks Drew!   You have some great thoughts there. Perhaps I should provide a clearer environment of each high school(4). All classrooms have a lock down Windows environment. (There are no Macs any where in any classrooms.) The mini-tower will be the only Mac on each high school campus. we're in Dell country. The desktops are locked in such a way that only the ghosted/installed software on each hard drive works and no other software can be installed. USB sticks can't run any exe, jar, or other executable file. Even the other drives on the network can't run them. This has been setup to prevent students from bringing games into the environment and running them. Only the single classroom in each high school, where Web Tech is taught, has a ftp tool installed. Students cannot bring and use their own laptops either. So there really isn't any stray ftp activity happening. You cannot "ftp" out of the network! And there is only the one Mac available per campus. All this makes it certainly easier to maintain for sure. I am the only user in the school district they let run a personal laptop...mine has Ubuntu (tweaked). My knowledge of Linux has led them to assign this project to me. They are MS based entirely and so is their knowledge base.
I've got to teach the other 4 teachers how to manage the mini-tower. Basically it is this:
     Start and stop Apache2,
     Start and stop vsftp,
     Add ftp users(students will only have directory:           /Library/Server/Web/Data/Sites/Default/studentlastname.firstname ) Students will not log on to the min-   tower directly as any normal user would, but only through ftp. (I.E. no /home directory) ,
     Remove/delete students as needed
     (I'll pre-install cgi-bin scripts on these to keep it simpler on the other teachers and myself.)
With this in mind, you can see why a basic script or single command line to install these students would be great! I want to keep it simple to avoid mistakes the teachers might make adding users. Once I understand adding a user (in a terminal) better on a Mac, I may write a script to make it happen for them.
I'd also like to understand removing/deleting a student/user better to insure everything is gone when executed.
I hope this clear things up. Any help is much appreciated.    THANKS!!!

Material and Service in a Single Line Req

Hi
We hv a requirement of material and service in a single line item, Exampls is client ordering some fabrication work to one vendor. It involves both matl and service changre.
For the matl cost we need to calculate VAT and for the service charge we need to calculate service tax.
For ex 1000 is the total amt for a line item. In this 600 to be calaulated for VAT 4% and for balance 400 to be calculated as serv tax 12.5%.
The same is happening in sales and they can be do this. How tro do the same in MM purchasing.
Vijay

Hi
Can it be possible to make a PO only one line item. Say item 10 thats only one item. That line 10 have both matl and service.
Both matl tax and service tax need to be calculated for the line item 10.
Is this possible.
Client dont req these as 2 line items. Here the scenarion and req is like that.
Vijay

Single line item for multiple line item payment.

Hi
I have booked the 3 vendor invoices (in FB60) for a single vendor. Now today i paid (with F-53) all the three invoices together. One payment document number was generated.
However when i saw the vendor line item, i saw that three debit line items was generated for the clearing the open invoices (i..e 3 credit line items). so when i say vendor line item report, there were total 6 cleared line items (3 for credit i.e invoice and 3 for debit i.e. payments)
But is it possible to get single debit line item for all the three invoices cleared. If yes, please let me know how i can get it.
If i will have one single line item for payment, vendor report would be simpler. Please help

Hi,
1. If you do payment through F-53, then each invoice have separate payment line item. This is not avoidable. If you do payment through F110, then you can group the line items for payment, so there only one payment line item for many number of invoices.
2. While clearing through F-44, system is generating automatic line items because, there are exchange rate fluctuations. You can't avoid these line items, as these automatic line items only match Debit and Credit amounts in order to post the document.
Rgds
Murali. N

Asset Creation in PR and PO and MIGO as a single Line item with "N" qty

Hi All,
In Purchase requestion ME51N
Now we are creating "n" number of assets ( All are same item but "s.no" will vary) with "n" number of line item.
Instead of this I have to enhance to create only one line item( For same item) with "n" quantity.
for the ASSET account Assignment we have to create Asset(Temp no) for the each item/quantity(if the same item).
as well as if they are going to create a PO with ref to PR they have to see all the "n" number of asset no.
In MIGO creation for each asset we have to assign S.No and Asset Tag.
How enhance the functionality in PR,PO and MIGO as well as in Invoice.
Is it any User Exit/BADI is available for PR/POand MIGO to show all the "n" number of assets for a single line item.
Kindly help me to give details to proceed further.
Thanks in advance.
sharma

Hi Sharma,
What i understand from your question is, you want to create a single line item in PR and PO. But the qty would be > 1.
Each single qty would have its own asset number in account asssignment tab of item details of PR & PO.
This is what you are expecting...Right???????????????
Then this is possible with certain limitations.
While creating PR, enter only one item with more qty.
In item details section, in account assignment tab, on top left corner, there will be a button called Multiple account assignments.
Click on it, then it looks like a table, where you can enter more than one line. (each line will have its own asset no)
And choose option Distribute on qty basis for field Distribution.
So that you can enter 1 qty for each line. ( Ex: if you created one line item in the item level with 10 qty, you need to maintain 10 line here, each qith 1 qty and diff asset no).
The only limitation to this is, the GRN would be treated as non valueted. So when you make GRN there wwould not be any accounting doc. ( means no use of GR/IR clearing account as like normal for POs)
when you prepare MIRO, all the assets will be capitalised and vendor credited.
But in case if you receive partial invoice, then you have choose manually in MIRO. which asset is ot be capitalised.
After entering the PO number in MIRO, there will be one line will be appeared with full qty. in the same line, move till the end of line, there you will have one button called Account assignments.
Choose and go there, here you can choose which individual asset line to be considired.
This will resolve your issue.
Thanks,
Srinu
SRBORIGI_MULTIPLE ACCOUNT ASSIGNMENTS

Single line in standard report

HI all,
It would seem that with all the functionality of APEX, that the world just wants to copy the look of Excel :/
How to wrap/nowrap the column value in an interactive report??
The above post was great to come across and I can now make Interactive reports with a single (non text wrapped) line of text, making it easier to read if your're happy to scroll across the page forever.
I've been asked to get the same functionality in a standard (non-interactive) report and have failed to achieve it. I've looked at the posts and proposed solutions here involving various uses of nowrap and white-space in the page and/or template.
I'm just after a single line of text per record in a standard report, no matter how wide the report gets. Is anyone able to help me out with this?
NT

It will be a lot easier to help if you provide the following information:
APEX version
Theme
Region template
Report template
Browsers/versions used
An example on apex.oracle.com is even more helpful.

Pick Release single line in a sales order

Hi All,
I want to pick release a single line from a sales order i.e if i have a sales order which has 3 lines and i want to pick release first line using Release Sales Order form of OM R12. I am giving the delivery detail id in Release Sales Order form, it is creating the concurrent request but it is not pick released. Please suggest what are the other parameters that has to be given so that i can pick release a single line of a sales order.
Thanks and Regards,
Mahesh

Hi,
Sorry for late reply. You have to use WSH_DELIVERY_DETAILS_GRP.delivery_detail_action.
Script is as follows.
DECLARE
cursor lcu_det is
SELECT released_status,
organization_id,
container_flag,
source_code,
lpn_id,
CUSTOMER_ID,
INVENTORY_ITEM_ID,
SHIP_FROM_LOCATION_ID,
SHIP_TO_LOCATION_ID,
INTMED_SHIP_TO_LOCATION_ID,
DATE_REQUESTED,
DATE_SCHEDULED,
SHIP_METHOD_CODE,
CARRIER_ID,
shipping_control,
party_id,
line_direction,
source_line_id,
move_order_line_id
FROM wsh_delivery_details
WHERE delivery_detail_id = 4369052;
l_rec_attr_tab WSH_GLBL_VAR_STRCT_GRP.Delivery_Details_Attr_Tbl_Type;
lr_action_prms WSH_GLBL_VAR_STRCT_GRP.dd_action_parameters_rec_type;
lr_dummy_defaults WSH_GLBL_VAR_STRCT_GRP.dd_default_parameters_rec_type;
v_msg_index_out NUMBER;
x_msg_count NUMBER(10);
x_return_status VARCHAR2(10);
x_msg_data VARCHAR2(4000);
x_action_out_rec WSH_GLBL_VAR_STRCT_GRP.dd_action_out_rec_type;
BEGIN
FND_GLOBAL.apps_initialize(1788,50577,660);
lr_action_prms.caller := 'WSH_PUB';
lr_action_prms.action_code := 'PICK-RELEASE';
l_rec_attr_tab(1).delivery_detail_id := 4369052;
open lcu_det;
fetch lcU_det into
l_rec_attr_tab(1).released_status,
l_rec_attr_tab(1).organization_id,
l_rec_attr_tab(1).container_flag,
l_rec_attr_tab(1).source_code,
l_rec_attr_tab(1).lpn_id,
l_rec_attr_tab(1).CUSTOMER_ID,
l_rec_attr_tab(1).INVENTORY_ITEM_ID,
l_rec_attr_tab(1).SHIP_FROM_LOCATION_ID,
l_rec_attr_tab(1).SHIP_TO_LOCATION_ID,
l_rec_attr_tab(1).INTMED_SHIP_TO_LOCATION_ID,
l_rec_attr_tab(1).DATE_REQUESTED,
l_rec_attr_tab(1).DATE_SCHEDULED,
l_rec_attr_tab(1).SHIP_METHOD_CODE,
l_rec_attr_tab(1).CARRIER_ID,
l_rec_attr_tab(1).shipping_control,
l_rec_attr_tab(1).party_id,
l_rec_attr_tab(1).line_direction,
l_rec_attr_tab(1).source_line_id,
l_rec_attr_tab(1).move_order_line_id;
close lcu_det;
WSH_DELIVERY_DETAILS_GRP.Delivery_Detail_Action(
p_api_version_number => 1.0
,p_init_msg_list => FND_API.G_FALSE
,p_commit => FND_API.G_TRUE
,x_return_status => x_return_status
,x_msg_count => x_msg_count
,x_msg_data => x_msg_data
,p_rec_attr_tab => l_rec_attr_tab
,p_action_prms => lr_action_prms
,x_defaults => lr_dummy_defaults
,x_action_out_rec => x_action_out_rec);
IF x_msg_count > 0 THEN
FND_MSG_PUB.get (
p_msg_index => 1
,p_encoded => 'T'
,p_data => x_msg_data
,p_msg_index_out => v_msg_index_out);
IF x_return_status = 'S'
THEN
DBMS_OUTPUT.PUT_LINE(x_msg_data);
END IF;
END IF;
END;
Thanks and Regards,
Mahesh

Using a phone from a Family Plan to a Single Line Plan

I am currently on a Family Plan and looking to switch to my own Single Line Plan. I would like to use my iPhone 6 and the same number on the new plan. Is this possible?

You'd need to do an Assumption of Liability. From this link:
My Verizon FAQs | Verizon Wireless
note # 2 under Assumption of Liability.

Can I add multiple elements on a single line?

Can I add multiple elements on a single line?

Not yet. But this is something we plan to support. You can vote on this idea here: http://forums.adobe.com/ideas/1046
We use this to help prioritize our work.
Randy

MessageTransformBean - SimplePlain2XML - Multiple records on a single line

Hi,
I am trying to convert multiple record from a single line to multipe rows in an XML message with the MessageTransformBean.
If the record look like this it's working:
RECORD1textETC
RECORD2textETC
But the incoming message are all on a single line:
RECORD1textETCRECORD2textETC
Is there a way to add a linefeed to my incoming message after X characters, or to tell the adapter to split by length instead of spliting on the end of line?
Thanks,
Martin

I had to code a custom Module Adapter to do it.
Here's the main part of the module adapter EOLConvertBean...
Message msg = (Message) inputModuleData.getPrincipalData();
XMLPayload xmlpayload = msg.getDocument();
byte[] content = xmlpayload.getContent();
byte crlf = 0x0A; // end of line char
int current = 0; // current bytes read
ByteArrayOutputStream baos = new ByteArrayOutputStream();
int lines = content.length / recordLen; // record len = insert EOL after X recordLen
// TODO change for do while for 1x line record
for (int i = 0; i <= lines; i++) {
     baos.write(content, current, recordLen);
     baos.write(crlf);
     current += recordLen;
xmlpayload.setContent(baos.toByteArray());
inputModuleData.setPrincipalData(msg);
Edited by: Martin Lavoie Rousseau on Oct 6, 2010 9:08 PM

Single Line and Stacked Bar Graph Representation

Data to be plotted on graph is as follows
Year and Month               Study               Planned Subject               Study-Site ID #               # Enrolled
2001 / 03          AMXN 9374               50     US-001               1
2001 / 04               AMXN 9374               50               FR-101               1
2001 / 04               AMXN 9374               50               SP-301               1
2001 / 04               AMXN 9374               50               US-001               2
2001 / 05               AMXN 9374               50               FR-101               1
2001 / 05               AMXN 9374               50               US-001               1
2001 / 06               AMXN 9374               50               FR-101               2
2001 / 06               AMXN 9374               50               SP-301               2
2001 / 06               AMXN 9374               50               US-001               1
I want to display the above data in line stacked bar graph format where the
#Enrolled will be in Stacked Bar by Study -Site ( Y axis)
Planned Subject should represent a single line at 50 ( Y axis)
Group by Year and Month ( X- Axis)
Study excluded ( Study will be selected from dashboard prompt)
I'm getting the stacked view of Study Site ID correctly but I want Single Line for Planned Subject .
Currently I'm getting multiple line .
Eg for 2001/03 I'm getting line at 50 in yellow colour
for 2001/04 I'm getting a line at 150 in different color since it has 3 Study-Site ID's But the desired output is Single Line at 50
As per 11g doc this is not possible because there is some upgradation in the nature of the graph
" Stacked line-bar graphs in which 2 or more measures are shown as lines on the same axis and are not stacked in 10g are stacked in 11g."
Refer - http://docs.oracle.com/cd/E21764_01/bi.1111/e16452/apndx_ui_chngs.htm
Is there any workaround for it ?

Did you found any workaround for it ? I am too looking for same scenerio.

Payroll Journal in a single line

Similar Messages

Maybe you are looking for