PBS archiving tool conversion of Z reports

Hi,
we are using PBS utility convert to convert the Z reports, so that it runs the report for current data and for archived data.
However the tool is unable to successfully convert some for the selects and this where manual editing is required.
I am unable to get the data back from the the FM which is /PBS/SELECT_INTO_TABLE where there is some issue with the conversion.
Did anyone worked on this kind of reports?
Thanks,
Bala

Hi Bala,
Check out the link :
http://www.pbs-software.com/documentation_e/e_PBS_ConversionTool.pdf
http://www.pbs-software.com/main_e/mediacenter_docu_e.html
http://www.asug.com/client_files/Calendar/Upload/SAP%20Archiving%20continued.ppt
It might help and also award points .
Thanks
Message was edited by: Saquib Khan

Similar Messages

  • Issue with one Select Query in  PBS Archive Translation Tool

    Hi All,
    Iam having X mark symbol against the select query from EKET table
    This is the select query in my actual program and when i convert this using PBS Archive Translation Tool i have a X mark against this select query
    SELECT SINGLE BANFN FROM EKET INTO V_BANFN WHERE EBELN = BSEG-EBELN AND
                                                      EBELP = BSEG-EBELP AND
                                                      ETENR = '0001'.
    I guess i have to modify this select query because EKET table has transaction data and we cannot ignore this X mark.
    Let me know if iam wrong
    ALso , iam confused whether a select query with X needs to fixed or can be ignored
    Thanks

    Hi ,
    Any Suggestions
    Thanks

  • Reading Archived Data Through SAP Query Report

    Dear SAP Gurus,
    My client archived their SAP data in a particular year range and all the Z reports have to modified to read these archive data. Normal ABAP reports can be modified to read the archive data without no problem.
    But there are two Z SAP query reports which should be modified the same way so it will be able to read archive data.
    What is the best method for this? Does SAP Query tool provide facility to read archive data? or do I have to append the code?
    Thank you in advance for your help
    Regards,
    Isuru Fernando

    >
    Isuru U Fernando wrote:
    > hi Manthan,
    >
    > Yes I used these FMs and read the data without any problem for normal ABAP reports.
    >
    > But SAP query report is the problem. Is it advisobale to modify the SAP query generated report source code? since it is a system generated report.
    >
    > Regards,
    > Isuru
    No, do not adapt the SAP generated report source. The reason is: every time someone re-generates the query from tx. SQ01 your changes will be lost.
    You could add the functionality Manathan gave you to add to the infoset of said query - but to be honest: in my opinion that is shooting nuclear rockets at flies. Also you run the risk that every change of the infoset (add a join/delete a join) requires adjustment of said coding you applied ... and where will you be then? Fancy repairing the same query over and over again? Try talk sense to your client - go for a Z-report here ...

  • Currency Conversion in WebI Report

    Hi All:
    Need your help in currency conversions using WebI Report.
    Current Scenario: 
        Currency conversions are currently achieved at BEx Query Designer level where target currency is determined through a Selection Variable.
    Proposed Solution:
       As per the Business proposal, BW will be publishing the data to Terradata; a universe will be built on Terradata and a WebI report will be based on this universe.
    Question:
       How can this type of currency translation be achieved in WebI Based  Report?

    Hi,
    Current Scenario:
    Currency conversions are currently achieved at BEx Query Designer level where target currency is determined through a Selection Variable.
    Proposed Solution:
    As per the Business proposal, BW will be publishing the data to Terradata; a universe will be built on Terradata and a WebI report will be based on this universe.
    Question:
    How can this type of currency translation be achieved in WebI Based Report?
    >> You would use the same logic by using a variable in the BEx query designer and Web Intelligence would then leverage the variable from the BEx query.
    ingo

  • Since downloading Firefox 4, I am having problems archiving gmail conversations from my inbox view. Also, when I go to enter a new event in google calendar, I now have to click the cursor in the box to type the event (it used to let me just start typing).

    Since downloading Firefox 4, I am having problems archiving gmail conversations from my inbox view (either one or several conversations) as it says "No Conversations Selected" when I have selected one or several. Also, when I go to enter a new event in google calendar, I have to click the cursor in the box to type the event (it used to let me just start typing) or else it flips out and starts jumping to day view or another month. Does anyone know how to fix either of these?

    I have had this problem; but while trying to fix another problem, I reset my preferences for Firefox and it fixed this problem as well. To reset preferences, follow this link: http://support.mozilla.com/en-US/kb/Resetting%20preferences

  • Unclean conversion of chart reports to html form

    dear all,
    i created some charts like pie, bar graphs. i want to convert
    that chart reports to html form.
    my problem is that after conversion of chart reports to html form,
    whatever the part of chart is unclean, it's totally in block colour.
    what to do to present that chart part in RGB colour format on
    the web. please some one help me as it is urgently required.
    i am using the reports buider 6i.
    thanks in advance

    Here 'part of chart is unclean' means: that a report contained
    two parts one is normal )in the form of data) , 2nd one is graphical
    representation(pie or bar graph which is imported from graphics
    builder) of that dat.
    The above quoted statement means that graphical representation
    part is not clear.
    i tried for the solution(Danny's suggestion). but it didn't workout.
    could any one tell another solution?
    TIA

  • OBIEE 11g : Tool tip on a report link

    Hello All,
    Is it possible to add a mouse over tool tip to a report link on a dashboard page (not on column heading) ?
    The dashboard currently has descriptions for the report links to see what is the report usage and it is eating up a lot of space , the idea is to eliminate this notes section and provide information to the user so as to what the report is as a tool tip.
    I have seen OTN threads on tool tips on to reports and column headers but I would like to just specifically add the mouse over pop-up to a report link that exists on a dashboard page.
    Any suggestions , please advice.
    Thanks,
    -VS

    There is a way using JavaScript, right now I dont have code to share with you.
    Assuming your report name is "Summary Report", using JavaScript search for this "Summary Report" on dashboard and apply CSS script something like mouseover.
    You may get code in pieces on net, try it out.
    I too try to help you with code but take some time ;)

  • Tools to enforce Forms / Reports 9i Standards?

    Does anyone know of any good tools to enforce Forms / Reports 9i Standards? Thinsg like naming conventions, structure and so on.
    Ive heard the .NET IDE has had these kinds of features for a while and had hoped Oracle wouyld have taken a similar position with 10G.

    Yep Im with you there and we are already doing that (at least we should be!). The problem is that theres no way of knowing for sure what someone has done without manually checking all their code and with tools like Forms its very easy to miss hidden logic.
    Some kind of QA tool to evaluate an FMBs conforming to a predefined set of standards would be very helpful. Esepcially if combined with SCM it had to achieve a pre defined grade or score before you were allowed to check it in.

  • Conversion of Oracle Reports to BI Publishser.

    Hi,
    When trying to convert the oracle report to BI publisher using the conversion utility Iam encountering the below error.
    Exception in thread "main" java.lang.UnsupportedClassVersionError: oracle/apps/x
    do/rdfparser/BIPBatchConversion (Unsupported major.minor version 49.0)
    at java.lang.ClassLoader.defineClass0(Native Method)
    at java.lang.ClassLoader.defineClass(Unknown Source)
    at java.security.SecureClassLoader.defineClass(Unknown Source)
    at java.net.URLClassLoader.defineClass(Unknown Source)
    at java.net.URLClassLoader.access$100(Unknown Source)
    at java.net.URLClassLoader$1.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClassInternal(Unknown Source)
    The below steps I followed
    1) copied all necessary .jar files to the D:\jdev\project folder
    2) Set the classpath
    3) set the path and class path with correct java home C:\Program Files\Java\jre1.6.0\lib
    ran the below command to convert the .xml file created using the report converter tool.
    D:\Jdev\project>java.exe -classpath aolj.jar;xdocore.jar;collections.jar;j5472959_xdo.zip;versioninfo.jar;xmlparserv2-904.jar oracle.apps.xdo.rdfparser.BIPBatchConversion -source d:\Desg\output -target d:\Desg\output -debug
    Any Suggestion is highly appreciated.
    Thanks.

    You have to change the system parameters :
    DESTFORMAT = Delimited
    DESNAME = c:\file.xls
    DESTYPE = FILE

  • Conversion of Actuate Reports to BI Publisher

    Hi,
    Is there anyone who has converted Actuate reports to BIP ?
    I will need some help.
    Thanks,
    Vandana

    Hi Vandana,
    I would recommend to re-create the report instead of converting from Actuate to BIP.
    I have used the very initial version of conversion tool and wasnt really impressive.
    I haven't tried the new version which also creates IO's and IC's for conversion.
    Thanks,
    Vamsi

  • Conversion of oracle report(RPT) to SQL*Reportwriter 1.1

    Hello,
    My client has setup of Oracle5.0,form2.3,Report in RPT format.
    He wish to upgrade this to Oracle 7.X , Forms3.0 and
    SQL*Reportwriter 1.1.
    I could convert Forms2.3 to Forms3.0 and upgraded the database
    to Oracle7.X by taking import of Version5.0 database....but I
    failed to upgrade Oracle reportwriter(in RPT format) to
    SQL*Reportwriter1.1..
    I will appreciate if any body can can expalin me steps to be
    followed for this(REPORT) upgradation..as I do beleive
    conversion is possible..
    I checked with manual but I am not clear...!!
    Regds,
    Pratip
    null

    hai pratip,
    there is no direct utility to convert rpt's to ver1.1 reports.
    we need to understand what exactly it is doing write the same
    thing in sqlreportwriter,other wise there is a thirdparty tool
    for conversion of rpt's to v1.1 reports.kumaran software is
    having that tool,if u want u can contact those people.
    friendly
    sarma
    Pratip Raychaudhuri (guest) wrote:
    : Hello,
    : My client has setup of Oracle5.0,form2.3,Report in RPT format.
    : He wish to upgrade this to Oracle 7.X , Forms3.0 and
    : SQL*Reportwriter 1.1.
    : I could convert Forms2.3 to Forms3.0 and upgraded the database
    : to Oracle7.X by taking import of Version5.0 database....but I
    : failed to upgrade Oracle reportwriter(in RPT format) to
    : SQL*Reportwriter1.1..
    : I will appreciate if any body can can expalin me steps to be
    : followed for this(REPORT) upgradation..as I do beleive
    : conversion is possible..
    : I checked with manual but I am not clear...!!
    : Regds,
    : Pratip
    null

  • Conversion of Bex reports to vovyger

    Hi Friends,
    I have some reports in bex analyzer now i want to convert into vovyger reports.
    Pls can any one tell ,will it be possible or not.
    Pls send the conversion docs if it possible .
    Thanks & Regards,
    Ramnaresh .P.

    Hello Ramnaresh,
    I doublechecked our documentation but did not find anything.
    At the moment there is no conversion tool for BEX reports to BOE reporting solutions but
    I do not know future plans.
    Best regards
    Falk

  • MacIntosh to NT Conversion - Forms and Reports

    I have to convert an existing 4.5 system from MacIntosh to NT.
    I am looking for hints on what to do and what not to do.
    If you have done this type of conversion please let me know.
    I am currently researching the use of uifont.ali (from tools\common60) and FORMS60_DEFAULTFONT, plus Oracle Terminal.
    Are there any other tools about which I should be researching?
    Thanks

    If you only need Forms and Reports you can use Forms & Reports Services Standalone version, dowloadable from http://www.oracle.com/technology/software/products/ias/htdocs/101202.html

  • Poss. bug in Voice Memos tool -- how do you report to Apple?

    Hello all,
    I suspect that I have found a bug in the Voice Memos tool that comes with iPhone. Does anyone know how to report this to Apple? I'm not a developer, so I can't go through the Apple Developer Connection, and the www.cqf.apple.com URL that they want non-developers to use doesn't work.
    The problem seems to occur when I have been recording a long, one-hour lecture, and accidentally tap the pause button instead of stop. If I then tap the record button to get the stop button to display again and then tap the stop button as soon as it redisplays, the resulting file does not work. I'm unable to sync it down to my computer, and it won't play back in Voice Memos, even though it shows the recording length (hour, minutes, seconds) for the listed file. If I tap play in Voice Memos, it simply doesn't play; the playback bar shows it as being zero minutes. I'm also unable to trim the recording.
    This has happened twice in the past ten days since I started using the tool, and I suspect that the actions of tapping pause, then play, then stop is occurring too quickly, even though these buttons are available. Perhaps with a large file like this (one-hour recordings are about 10 MB), one needs to allow the tool to get the file back into "record" mode after tapping play, but before tapping stop. Unfortunately, with the stop button available right away, it's very easy to tap it before the tool may be ready for you to stop the recording. I hope this makes sense.
    I'd like Apple to look into this and perhaps consider making the stop button unavailable until the file is truly ready to be stopped. Does anyone know how to report this to them? They seem to make it so difficult.... Of course, if anyone has any thoughts on this or has had the problem too (surely I'm not crazy?), I appreciate knowing more, although I doubt there's anything I can do to fix the problem, except to avoid tapping the pause button in the first place, and if I do, go slowly and allow the tool to actually continue recording before tapping stop.
    Thanks!
    Elesar

    Only registered developers can report bugs. If you're not a registered developer, use this link:
    http://www.apple.com/feedback/iphone.html

  • Extract Archival data and display in report

    Hi All,
    I prepared a report to display the details of GL accounts with vendor details.
    i need to extract archived documents also and display in my report.
    Kindly let me know how to extract the archived FI documents.
    Regards,
    Saravana

    Hi..this is really habit of doing R and D.
    Generally, we do archive the fi documents using the archiving object FI_DOCUMNT in the transaction SARE which archives all the tables related to FI application area.
    Also, we do generally view the archived fi documents in the transaction SARE  ..just you need to pass the object name as FI_DOCUMNT and the info structures if active.
    We do also have the read program to extract the all the archive fi documents...please check this program: RFBELJ00
    you can develop your own program as per the above standard one. But do you think, it is neccessary???
    Please let me know if you need any inputs from me..!
    Please rewards points if sounds helpful/useful.
    Regards,
    Shamim

Maybe you are looking for

  • Presentation copyright question

    Hello, I was wondering what others do about copyright issues with PowerPoints that have been converted to a breeze presentation, or what you might reccommend. It seems like a lot of our presenters put things like dilbert cartoons, or movie clips into

  • Nano won't restore

    Hi, I hope someone can help me. When switching on my Nano it asks to be connected to Itunes to be restored. Once the restore process is complete, iTunes says the iPod is corrupted and asks to restore it. I have gone through the restore process again,

  • In PSE 13 Organizer, is the "notes" field an actual IPTC data field or a data field only to the organizer?

    I would like to access the "notes" field in multiple files and write to it.  Is this possible?  If so, where is the "notes" field in METADATA information?

  • NetApp direct connect to UCS best practices

    Folks, I have installed many FlexPods this year but all involved either Nexus 5Ks or 7Ks with vPC. This protects the NFS LUN connections from both network outages or UCSM FIM outages. What is not clear to me is the best practice on connecting a NetAp

  • How to install an STK applet on SIM via OTA (over the air)?

    Dear All, What I am trying to do is to load and install an applet by sending (over the air) the same sequence of direct GP apdu commands wrapped in envelope commands. The sequence of direct sequence involves selecting the issuer security domain, init