PC Suite 6.83.14.1

Dear all,
Here are the details:
Operating system:
Microsoft Windows XP
Build 2600
Service Pack 2
Language: English
Language for non-Unicode programs: English
Locale: English
Input language: English
Nokia PC Suite:
Version 6.83.14.1
Language: English
Connectivity Cable Drivers:
Version 6.83.9.0
PC Connectivity Solution:
Version 7.7.10.0
Microsoft Outlook:
Version 11.0
Build 8118
Bluetooth stack:
WIDCOMM Bluetooth stack
Version 5.0.1
Build 2900
===================================
Ok, now the question, I have paired the mobile with the my comp and given authority for it to sync with out my auth. I have created a sync profile as well. I could manually initiate a sync, but i don't see my configured automatic sync which is to happen every hour happening. Can i have some help on this.
TIA
Thamara.

The email sync was supported only in the 9300, 9300i and 9500 models.
You can synch email over Wi-Fi or the mobile network directly to your email server through built-in Messaging client via standard Internet protocols (SMTP for sending and IMAP4 or POP3 for receiving).
Or you can look into more elaborate "push" email solutions:
http://businesssoftware.nokia.com/
Local PC/Outlook to phone sync with USB, Bluetooth or infrared will not work, unless you find some other solution than Nokia PC Suite (or unless Nokia comes out with an E61 update that supports the existing functionality in PC Suite that works with the older Communicators).

Similar Messages

I am unable to open my Photoshop program after installing the entire Creative Suite: Premium Production 6. All other programs work, but with Photoshop it says that the program is "locked or in use by another user". I need this fixed immediately.

I am unable to open my Photoshop program after installing the entire Creative Suite: Premium Production 6. All other programs work, but with Photoshop it says that it "Could not open a scratch file because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock the file." Then I select "OK" and the next message comes up "Could not initialize Photoshop because the file is locked, you do not have the necessary permissions, or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock this file. I installed all of the programs on the same day from a CD. I need this fixed immediately.
I am not interested in switching to Creative Cloud, so don't even suggest it. I spoke to Mashmi (or something to that effect) on the "Support" Chat and there was absolutely no support. Useless actually.
Thanks in advance.

Could not open a scratch file because the file is locked or you do not have the necessary access privileges. (…) | Mylen…
Mylenium

I downloaded mountain lion and then the new office suite (word, ppt, excel) but now when I try to display one of my ppt's it says 'ppt cannot open the file...the file may be corrupt, in use, not a type recognized by ppt etc.." how can I fix it?? HELP

I downloaded mountain lion and then the new office suite (word, ppt, excel) but now when I try to display one of my ppt's it says 'ppt cannot open the file...the file may be corrupt, in use, not a type recognized by ppt etc.." how can I fix it?? HELP

Did you try to open teh fle by double-clicking its icon? If the file was made with an older version of Office, you may get that message. Try opeing PP and, from its "File" menu, see if you can open the ppt. I've foundthat often gets around that message and then yo ucan save the file from the newer version.
If that doesn't work, consider asking in the Microsoft Office: Mac forums here:
Office for Mac forums
PowerPoint is not an Apple product and it seems a lot of people around here avoid Office.

How Many Times Can I Use The Same Serial Number For Adobe Creative Suite 4?

I have design standard and was told I can use the same serial number on multiple computers. How many time can I use it? And say I install it on the maximum number of computers, but get a new computer, can I uninstall it on one of the old computers and use it on the new one? And can I use the programs on both computers simultaneously or do I have to use them one at a time?

Fred Tech wrote:
Broadly speaking, it depends on the type of license you have.
Specifically, if you have a single license then officially, you should only install it once on one computer.
Practically, (unless it has changed with CS4) you maybe able to install it on more then one computer, BUT can only run one instance of the software at a time. You can not run more then one instance of the software concurrently; i.e. you can't run Dreamweaver on Computer 1 and Photoshop on Computer 2. That would be two instances, and is not permitted.
This is my understanding. I am happy to be corrected if I am wrong
Fred
Sorry Fred you are wrong.
If you have a single license you can install it on as many computers as you like. you can only activate the suite on two computers at anyone time. Work and Home or as many of us do it Desktop and Laptop. You can not use the computers simultaneously. You only have 20 activation/deactivations so use them wisely. Student versions only have one activation. You can not break up the suite installs the suite is considered one application.

How do I add Adobe Creative Suite to my MacBook Pro...?

@Forgive me for asking what may be a really silly question.... but here goes..!
I currently have the Adobe Creative Suite on my Mac desktop and now I'm wanting to add it to my new MacBook Pro. How do I install all the apps without having to purchase them again? I'm logged in and searching but guess I'm missing the info I need to do this.
Thanks!

Just install it like you normally would - like you did with your desktop. You are allowed to have it installed and activated on two machines. If you need to download it you might find a link for that thru your Adobe account online.
Other download links might be available thru...
Download and Installation Help -
https://helpx.adobe.com/download-install.html

Can I install creative suite 6 on more than one device? (I've recently acquired a new laptop for on the go work, and am curious if I can install my adobe software onto such).

As of recently, I've purchased a new laptop.
Seeing as how I'm quite used to using my drawing tools in Photoshop and Illustrator (my trusty Wacom Intuos Pro),
I'm curious as to if I'm able to install my current purchased version of Creative Suite Design Standard 6 onto my laptop (whilst still having it installed on my main at-home work desktop).
Thank you very much for taking the time to oversee my question, and hopefully respond with an answer.
Much thanks!

Thank you for the assistance!
I shall try to install once I arrive home from school this evening.
Again, much appreciated!

Error message deploying a composite in SOA Suite 11g

Hello,
We are attempting to deploy a composite to SOA Suite 11g (11.1.1.3). We're getting an 'Unable to register service' error message. When I inspect the log files I see the following entry as the first error:
Failed to retrieve policy[[
oracle.wsm.policyaccess.PolicyAccessException: WSM-06146 : Error deleting the attachment entries.
Anybody have any experience with this error? The error message reference has the following listed:
WSM-06146: Error deleting the attachment entries.
Cause: Failure occurred while deleting the attachment entries.
Action: Ensure that a valid list of policy subjects for deactivated lifecycle type is passed
Level: 32
Type: INCIDENT_ERROR
Impact: Configuration
I don't know how to "ensure that a valid list of policy subjects for deactivated lifecycle type is passed". Please help!!!!
Thanks,
jh

This is what we have done :
1.Created the JDBC data source & connection pool as below :
data source name : B2BAQ , JNDI name : jdbc/B2BAQ
Connection Pool :
URL : taken from the tns entries of the instance
Driver Class Name : oracle.jdbc.OracleDriver
Tested this connection ..it works fine from the Admin Console
2.Then go to Deployments --> AqAdapter -> Configuration tab --> Outbound Connection Pool Group -->
Create a new connection pool instance -- General tab
connection interface factory : javax.resource.cci.ConnectionFactory
JNDI Name : eis/AQ/B2BAQ
Then in Properties tab : Enter the Data Source Name : jdbc/B2BAQ
Then we try to Start the AqAdapter from the Admin Console..it goes into Prepared status.
The error message which comes is mentioned above.
Is there any way we could resolve this ..that would be very helpful
Regards
Edited by: user5149250 on Mar 13, 2012 6:33 AM

Error while accessing Oracle E-Business Suite 11i from Linux/firefox

error while accessing Oracle E-Business Suite 11i from Linux/firefox
OS: SUSE Linux Desktop 11(SLED11)
Web browser: firefox 3.x
Java versions:
# rpm -qa |grep java
java-1_6_0-sun-plugin-1.6.0.u18-0.1.1
java-1_6_0-sun-1.6.0.u18-0.1.1
# java -version
java version "1.6.0_18"
Java(TM) SE Runtime Environment (build 1.6.0_18-b07)
Java HotSpot(TM) Server VM (build 16.0-b13, mixed mode)
when I access the url firefox says
"Additional plugins are required to display all the media on this page"
then I clicked on "Install Missing Plugin" button
then I got the following message
No Suitable Plugins were found
Unknown Plugin (application/x-java-applet;jpi-version=1.4.1)
please help/suggest
Regards

Hi user;
Its not certified to login EBS from linux client
Please check:
Linux-cleint (ebs) certification
pluggins
Hope it helps
Regard
Helios

PC Suite No conectivity after upgrade

I have carried out an automatic upgrade of PC Suite and can now no longer connect to any of my phones. I have tried un installing everything including the bluetooth and reinstalling everything. Even tried going back to the older version.
When I try to add a phone I get:
There is no available connection type so wizard will exit.
The phone is connected to the PC by Bluetooth. I also get he same error when connected by cable. Before I upgraded I updated the software on my 6300 by cable so I know the cable was working as well.
Information on the PC Suite Help page shows the following:
PC suite 6.86.9.3 English
PC connectivity Solution V 8.15.0.0
Nokia Connectivity Cable Driver V 6.85.10.0 ( I uninstalled the latest version as a previous post suggested and loaded this one.)
OS XP 32bit SP3
Lang English
Detected Internet Browsers
IE 7.0
Firefox 2.0 (Default)
Bluetooth Stack (Blank)
My bluetoooth driver is Widcomm ver 4.0.1.3500 There does not appear to be a microsoft bluetooth driver
I used to be able to sync outlook
Please can some one help as I am tearing what's left of my hair out. I have just got my phone back from repair and the contacts have been deleted and would like to restore them all. This problem has existed for several weeks now (Before I had to send my phone for repair). I think the constant switching on & off tryning to establish connection affected the ON/Off button which has now been repaired.

Hi drseehas,
As per Nokia PC SUite's User guide manual,
The system requirements listed below are valid at the release date of Nokia PC Suite 7.0. You can check the Nokia PC Suite Web page at www.nokia.com/pcsuite for more up-to-date information.
To do this
You must have
To install and run Nokia PC Suite
• At least 250 MB of free disk space
• One of the following operating systems:
• Windows Vista 32-bit and 64-bit editions
• Windows XP Professional x64 edition (Service Pack 2)
• Windows XP (Professional or Home Edition) (Service Pack 2)
• Administrator rights to the PC to install software on it
So as per above, Nokia PC Suite from 7.0.7.0 version, its not compatible with Windows 2000 Operating System

PC Suite 6.86.9.0 Backup Failure

PC Suite 6.86.9.0 Backup Failure
When backing up the messages on my N80(firmware v5.0719.0.2) the backup always fails when processing multimedia messages and windows reports "Windows Driver Foundation - User-mode Driver Framework Host Process" (WUDFHost.exe) has failed. All other parts of the backup work successfully.
What version of Windows is being used? Vista
What Service Pack is installed? SP1
What version of PC Suite is installed? 6.86.9.0
What is the connection method, cable, bluetooth or IR? usb cable
Does anyone know how to correct this issue ?

13-Apr-2008 12:16 PM
chris9 wrote:
PC Suite 6.86.9.0 Backup Failure
When backing up the messages on my N80(firmware v5.0719.0.2) the backup always fails when processing multimedia messages and windows reports "Windows Driver Foundation - User-mode Driver Framework Host Process" (WUDFHost.exe) has failed. All other parts of the backup work successfully.
What version of Windows is being used? Vista
What Service Pack is installed? SP1
What version of PC Suite is installed? 6.86.9.0
What is the connection method, cable, bluetooth or IR? usb cable
Does anyone know how to correct this issue ?
plz can u post the Screenshot of error?
i m not having this type of problem, Backup is working Fine for Me.
Nokia 5530 Xpress Music RM-504
v30.0.009
31-5-10

How to install ovi suite to a drive other than C:?...

how to install ovi suite to a drive other than c:??? my c: drive is almost full with other partitions perfectly free to install it, how do i do that? can i use previous versions of ovi suite to use with my e63? at this point, i'm unable to use ovi suite at all, because there's no room to install it on my c: drive.
allllllllso there's one more thing, when i originally had tried installing ovi suite on my computer i had more than 1gb free. after installing it i on'ly had 500mb free. i had only intended for it to use a very small amount of space, and since i also use my c: drive for virtual memory i quickly uninstalled it, looking for an option i'd maybe skipped over while installing it the first time. no luck. anyways, when i looked in the add/remove programs control panel the installed size of ovi suite was only 40-50mb. even after uninstalling ovi suite the extra memory space that seemed to all of a sudden taken up by the installation stayed used.
when looking at the file sizes of everything on my hard drive, (including system files and paging file) there is still a descreprency between the amount of memory used and the size of all files total on the drive. at this point im quite disgusted and disapointed in ovi suite as i'm mostly unable to use it to connect my phone to my computer and i'm also having problems with the CA101 cable as well. i guess i'll have to go check for another cable.
nokia!!! wake up and fix yo **bleep**!!!!
anyone have any solutions for the main problem? (installing to a drive other than c? is there support for this option in any of the new beta versions? can that be included in the newest betas? i'm suuuuuure i'm not the only one begging for this option!!!

Hi ostrenga4, sorry to hear about your experiences.
When installing Nokia Ovi Suite to PC, Windows makes "system restoration points", which are available to restore operating system to previous condition, if something goes wrong, for example in driver installation.
You can change install location of Nokia Ovi Suite with following:
- Download Nokia Ovi Suite install package from Nokia Ovi Suite pages
- Start Windows Command prompt
- From Command prompt, navigate to folder containing Nokia Ovi Suite install package, which you downloaded
- Start Nokia Ovi Suite install package with command line "Nokia_Ovi_Suite_webinstaller.exe /TARGET="D:\TestDir\Test"
- This results, that Nokia Ovi Suite installer creates folder D:\TestDir\Test (if that doesn't exist) and installs Nokia Ovi Suite there.
- Unfortunately, Windows Installer still keeps installer cache files and system restoration points in C: drive (or whatever your system drive is)
As you can see, this is possible, but it is very much recommend to have enough space for installing software into system drive.
Cheers, Samuli

How to install Oracle Developer Suite 10g on Windows 7 (64-bit)

Hi,
I have windows 7 (64-bit) installed on my laptop. I want to install Oracle developer suite 10g R2 on this machine but when I run the Oracle Universal Installer, it gives me error stating "operating system version: must be 5.0, 5.1, 5.2. Actual 6.1 Failed<<<<
Exiting OUI.
Can anyone please help me to solve this problem.
Thanks in advance.
Regards

Be aware that Developer Suite 10gR2 is not supported for use on Windows 7. Installing it on this platform may result in undesirable behavior.

I just got an imac that doesn't have the option of a cd drive, I have my adobe suite on another computer, how do I get it on the new computer?

I purchased the adobe suite cs6 a few years ago on a cd, installed it on another computer, and now I got the imac that doesn't have a cd drive, how do I install the adobe suite onto my new computer without having to use the cd?

Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

How to Restore E-Business Suite after Server Crash?

Hi Hussein Sawwan,
I have a question that will be useful to other members of the community. How do I restore Oracle E-Business Suite R12 after physically loosing the server that hosts the ERP instance?
I have 2 scenarios here:
1-Existing cold backups of the DbTier and AppsTier are available
I have been doing a full backup of the Apps and Inst folders once a week on an external drive.
I have been copying the DB folder (Data + DBMS_ORACLE_HOME) after shutting down the database cleanly once a week on an external drive. Noting that, here the database is in NOARCHIVELOG mode.
2-Existing Hot backups of the Database are available and I have a backup of the Apps and Inst folders (AppsTier)
The database is in archivelog here. I have been doing a full hot backup of the database once a week, an Incremental backup everyday, and a full backup of the archivelogs once a week. All of this to an external drive. The Apps and Inst folders are backed up once a week to an external drive.
Let say something bad happens and we completely loose the physical server. How can I do to restore and recover my Oracle E-Business Suite R12 to a new server?
I know I will have to Install the same OS on the new server, but what happens after that?
Thanks in advance,
Clamarion.

I believe the easiest approach would be:
- Install the same OS on the new servers
- Install OS pre-req software and packages for your EBS instance
- Restore from cold backup (if the crash happened directly after this backup and you haven't lost any data)
OR,
- Restore from hot backup (if the crash happened after your cold backup and you have data that wasn't part of the cold backup)
I assume that no changes to the hostname, domainname, IP Address, port numbers, directory structure, ..etc is taking place in this restore.
Thanks,
Hussein

Runtime Error when installing Adobe Creative Suite 5.5 Production Premium

I am trying to install Adobe Creative Suite 5.5 Production Premium, but I keep getting a 'Runtime Error!': This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information.
What should I do? Any help greatly appreciated! I am running Win 7, Service Pack 1, 64 bit.

We cannot know. Your information is hugely insufficient. Check Your Windows Event Viewer and tell us the "fault module" plus provide detailed specs for your computer. Runtime errors usualyl mean that A DLL is missing, a security tool is blocking critical functions or that the processor is not compatible in teh first place. Just as well this could be a driver issue with your SATA bus or whatever.
Mylenium

Update failed. Windows - Creative Suite 5 Premium. Trying to update Camera Raw.

My apologies if I'm not following the correct protocol on this forum. It's my first time here.
I'm a novice with Photoshop and the Creative Suite, and until now I have only used its basic features.
However, I tried to upload a RAW format image today, only to learn that program won't accept it.
I tried to update the Camera Raw plug-in, but it doesn't want to install.
I tried updating the whole suite using the "Help" and Update menus.
It downloads the appropriate updates for my version, and apparently begins to install them.
However, after the install bar reached 60-70 percent, it stops and says installation failed.
It is properly registered product - the serial number is in My Account.
Can anyone suggest a fix for me please?
Thank you.

update by downloading the files directly and then applying them:
pre cc updates: http://www.adobe.com/downloads/updates/
however, you may not be able to update cs5 sufficiently to use your camera (which is?). you can then use the dng converter.
DNG Converters:
Win
Mac

PC Suite 6.83.14.1

Similar Messages

Maybe you are looking for