PC Suite 7 – Data transfer not possible. Check dat...

When I try to use (open, update, modify etc.) the “contacts list” in PC suite version 7.0.7, I always have the following error: “Data transfer not possible. Check data connection”. Instead the SMS list works fine. My phone is Nokia 6267.
Anyone has a solution?
Best Regards
Bix123

Hi everyone,
I had the same problem for months with many PC Suite versions & both XP service packs until I tried a phone setting just for testing and everything worked out fine In my phone (3110c) under Settings / Connectivity / Data Transfer / PC Sync, I filled in a random User name & Password and voila!!! All contacts copied just fine!!! I hope this works with other models with the same menu as well. It looks that it's not a PC Suite problem after all (at least for me that is).
Hope I helped you guys
Spiros
Greece

Similar Messages

6301 & PC Suite - "Data transfer not possible. Che...

Well, as the title says really.
Upgraded from 6280 -> 6301.
I use Outlook 2003 and sync contacts & calendar.
Sync'd the 6280 before finalising upgrade, plugged in the 6301 with a mini-usb cable (All driver reports it installed new hardware fine) once it had fully come into service and it wouldn't sync.
The phone displays "Data transfer not possible. Check connection" and Nokia PC Sync shows the warning "The mobile phone as not responded". It's solution is "Please ensure your phone is in the standby mode, then restart the Synchronisation. "
Have updated to latest version of PC Suite 6.85.
A bit annoying, as I no longer have any contacts info on the new phone...
Running XP, AMD 3ghz, 4gb ram.

Having spent many hours on this I have now got it working...
This is how :
1. On the phone go to : Settings: Sync and Backup: Server Sync: PC Syncronisation and enter a username and password.
2. Select Synchronise in Nokia PC Suite, in the Connected to 6301 window click the spanner (settings) icon. Now click the Adjustable wrench (Advanced) Icon and go to the sync profile tab and enter the same username and password that you used on the phone. Click OK twice and sync away...
Message Edited by kage64 on 05-May-2008 11:04 PM

5310 "Data transfer not possible" calendar sync is...

I'm trying to get my Nokia 5310 to synchronise its calendar with my work's Outlook 2003, using PC Suite 7.1.26.1. At work they use Windows XP and Outlook 2003 SP2. I don't want to bring my USB cable into work, so I'm using bluetooth to connect. The connection itself works fine - I can browse the 5310's media content, calendar and contacts using my computer.
The problem is with synchronising calendar with Outlook. It just won't do it. Every time, I get a "Data transfer not possible. Check data connection" message on the phone and a "PC Sync was unable to locate your Outlook message store" error in the PC Suite sync log.
Things I have tried:
Repair PC Suite.
Install new settings (spanner star button) and go through the wizard again.
As 2, but with manually selecting the Outlook folders on my profile (which were, in any case, already preselected correctly).
Copying a new profile and trying to sync with that.
Putting in (the same) username/password in PC Suite and the phone's "sync and backup" option.
None of these works. My work computer will happily sync with Google calendars, but won't sync with my phone.
I've had a good look through the forums but can't seem to find any solutions that work for me. Does anyone have any ideas of how I can get this to work?

Try one more thing. This worked for me.
1. Remove ALL email profiles. -
2. Recreate profile - don't forget to write down your Email exchanger server address. This will force Microsoft outlook to startup as if your a new user but will load your existing email from the server.
3. Setup PC Sync -- again
- this has been a pain in the neck!! - something gets corrupted in the profile that PC Sync does not like.

Data transfer not possible? Nokia 2700 classic syn...

I have Ovi setting on my 2700 classic, everytime i try to sync contacts - the prompt comes like "data transfer not possible". Help me with it also plz tell me any way of getting contacts back on phone/sim from ovi without PC. Addl. Info:- i had syncd the phone successfully on gprs without pc and i am so hoping that their must be some way out. Thanks

I am also having the same problem. I am using Nokia 7210. Please help me

Data Transfer Not Up-To-Date and To Be Archived at Project definition ?

Hi All,
I want to know about the statuses "Data Transfer Not Up-To-Date and To Be Archived at Project definition level?" In documentation Flagged for Transfer and To Assign are only mentioned.
Thanks and Regards,
Arti.

Hello Arti,
the system sets this status when there is a problem with the replication. For example, in the customizing of your project type (accounting area) you have defined the type of transfer as 'Automatic as of release of project'.
Now, for example, you have a project that has status 'Created - Transferred - Data Transfer Not Up-To-Date - Assigned', this means that the replication is not yet complete because according to the customizing setting you need to release the project first.
Hope this helps!
Best regards,
Silvia

Initialize delta without data transfer not possible

Hullo,
I want to switch the upload procedure for an ODS from full to delta. For I have researched SAP Note 689964 and executed the program RSSM_SET_REPAIR_FULL_FLAG for the ODS-object and datasource. It successfully modified the request and set the 'REPAIR_FULL' flag.
Now I want to change the InfoPackage from Full update to Delta. According to the note I have to perform an init simulation, my problem is that the option initialize delta without data transfer is in display mode only (i.e. it's gray and I cannot select it).
The InfoSource in question is "0HR_PY_1". I've checked several others and with some it is possible to select the initialization simulations and with others it's not.
My questions are a) Why is it this option grayed out? and b) What can I do to enable the selection of this option?
Any help is appreciated.

Hullo AK,
thanks for pointing out that note, sadly it's for "0HR_PY_PP_1" and not "0HR_PY_1".
However it lead us to note '611199'...
Symptom
Some attributes of the following DataSources are not defined.
0HR_PY_1 DataSource:
- Commit after initialization phase
- DeltaInit Simulation
0HR_PY_PP_1 DataSource:
- Commit after initialization phase
0HR_PY_PP_2 DataSource:
- Commit after initialization phase
Other terms
PXDW, extractor, posting transfer, settlement, PCPO, PCP0
Reason and Prerequisites
The SAP settings for the DataSources are incomplete.
The following attributes should be set:
0HR_PY_1 DataSource:
- Commit after initialization phase: no commit
- DeltaInit Simulation: Mode is not supported
0HR_PY_PP_1 DataSource:
- Commit after initialization phase: no commit
0HR_PY_PP_2 DataSource:
- Commit after initialization phase: no commit
Solution
Import the corresponding Support Package into the Plug-In Releases 2003.1 and 2002.2 and copy/activate the DataSources in the plug-in system again.
If the correction is imported, you can no longer select the "DeltaInit simulation" option for the delta initialization of the 0HR_PY_1 DataSource/InfoSource.
As long as you have not imported the correction or you are using an even older plug-in release, you should never select the "DeltaInit simulation" option during the delta initialization for the 0HR_PY_1 DataSource/InfoSource. The 0HR_PY_1 DataSource does not support this mode.
The 0HR_PY_1 DataSource only supports the delta initialization (without the DeltaInit simulation) and subsequent delta calls.
Sadly enough, not what I wanted to read, but well at least I now know that I shouldn't look into this solution anymore.
Again, thanks for your help.

PC Suite "Data Transfer Not Possible" 6500 Classic

Can transfer music files and send and receive SMSs in the PC suite, but contacts and calendar wont sync. Have correct firmware. Using data cable. Have general profile activated. Have tried with and without Sim card.
Any other ideas before I finally give up on this phone?

What version of Office Suites are you using? MS Active Sync depends upon the version of Office in much the same way as outlook where one have to synch it.
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

6300: Unable to sync contacts: "Data transfer not ...

Hello,
I'm unable to syncronize contacts between my new Nokia 6300 and a computer.
What works:
* Pairing the device
* File copy to/from phone via Bluetooth / USB.
* Manually adding new entries using the handset keypad.
What doesn't work:
* Synchronising contact details between the 6300 and the Windows
Address Book.
- Fails when using Bluetooth, Mini-USB cable.
- Fails on two different machines; one Lenovo R60e Thinkpad,
one self-built desktop /w a USB Belkin Bluetooth adapator.
I've been trying to work around this problem for a few days now and
running out of ideas. Neither Google nor the Nokia FAQs showed any
obvious solutions.
Any and all assistance gratefully appreciated!
Steps to reproduce:
===================
* Connect phone to machine:
- Either by plugging into USB, and selecting 'Nokia mode' on
the handset, or
- Pairing with the host computer via Bluetooth.
- Note: No username or password is set under
"PC Synchronisation" on the handset.
* Load PC Suite.
- Select "Synchronise".
- Nokia PC Sync loads.
* Click "Select Phone".
- Check that the phone appears in the list of connected devices.
- Select "OK".
* Select "Settings".
* Select "Create new settings".
- Configuration Wizard appears.
- Select "Outlook Express (Windows Address Book)"; press "Next".
- Tick "Contact Items"; press "Next".
- Select "Synchronise the Default Windows Address Book"; press "Next".
* Select "Synchronise Now".
- Status messages read:
"Connecting to Wisp..." (Wisp is the name of the handset.)
"Waiting for Wisp..."
"Opening Databases..."
"Reading Outlook Express..."
"Synchronisation Completed"
- 2 warnings reported.
- Synchronisation process lasts a couple of seconds.
- Progress bar only ever reaches the 50% mark.
Failure mode:
=============
Handset displays the following messages:
"Data transfer not possible"
Then:
"Synchronisation info:
Contacts: Incomplete.
Unable to process all items.
0 sent. 0 received.
Contacts updated on other device:
New: 0 Removed: 0 Updated: 0
Contacts updated on my phone:
New: 0 Removed: 0: Updated: 0"
PC Sync report:
Under "PC Sync information":
- "PC Sync has encountered a problem and has
terminated the synchronisation."
Under "Warnings (2)":
- The following warnings were produced during the synchronisation:
The Synchronisation has been Terminated!
PC Sync information.
Under "The Synchronisation has been Terminated!":
- PC Sync could not update the data to the mobile phone.
Under "PC Sync information.":
- PC Sync has encountered a problem and has terminated the
synchronisation.
Troubleshooting attempts
========================
* As mentioned, attempted running the PC Suite software on two
different hosts - no change.
* As mentioned, attempted using both Bluetooth and USB
connections - no change.
* Attempted a "Reset to Factory Settings" on the
handset - no change.
* Attempted erasing both the Windows Address Book contents, so
that both data sources were empty - no change.
Version information
===================
Laptop
Operating System:
Windows XP SP2 (32-bit)
Build 2600
PC Suite version:
Nokia PC Suite 6.83.14.1
Connectivity Cable Drivers:
Version 6.83.9.0
PC Connectivity Solution:
Version 7.7.10.0
Bluetooth stack:
WIDCOMM Bluetooth stack
Version 5.0.1
Build 1500
(Note: Other test host is running same OS, PCS version.)
Handset
Firmware version:
V 04.70 (24-01-07) / RM-217
Memory in use:
Phone

with my NOKIA 6233 I have exactly the same problem. I have not been able to spend much time on searching solutions, yet. I did, however, install the firmware update - this did not solve the problem unfortunately.
Hi misternik,
From looking on Nokia's support site and elsewhere, I already appear to be running the latest firmware revision available for this handset.
However, further Googling indicates that there are two different engineering codes that can be used to reset a phone:
*#7780# - Normal reset. (Replace all configuration files with default entries.)
*#7370# - Performs a deep reset. (Reformat main memory and restore from firmware.)
I'm not sure which mode the standard menu entry triggers; I might have a go running a deep reset to see if that clears the fault.
In several contributions to this forum (but for other phones) I read something about a PC-suite mode on the phone. I do not have this mode. When I connect the USB cable I can only choose between DEFAULT, PRINTING and DATA STORAGE. Should there be a PC Suite mode ? Maybe this is related to the problem ?
The 6300 handset presents a menu when first connected via a USB cable, and offers those options - "Nokia mode", "Printing mode", "Storage mode", or similar.
Nokia mode appears to provide all of the Nokia-specific facilities, such as PC Suite synchronisation, so I don't think that's the problem.
Cheers,
David

3120 classic won't sync - "Data transfer not possi...

The phone is Three-branded (UK), software version 07.16 and no software updates are available. I'm using PC Suite 7.0.7.0.
I am connecting my phone with Bluetooth - I don't have a data cable. The phone is new so has no data on it.
Whatever I select to sync (from MS Outlook), the phone says "Data transfer not possible" and I get a "PC Sync information" error. I've tried selecting unidirectional data transfer to the phone, as someone suggested this in another thread, but it makes no difference.
I also tried using OpenSync under Linux and the phone displayed the same error. (I did a factory reset after using OpenSync in case it confused the phone.)
Any ideas, please?

Hey there,
I had exactly the same problem and I just worked around it by giving my sync a username and password.
That is, in Settings->Sync and Backup->Server Sync->PC Sync I set a username and password. I then entered this information in PC Suite under Advanced Settings->Sync Profile
Hope this works for you, I understand your frustration.
Chris

Error in CJ88 Posting transaction is not possible (value date not allowed)

When i try CJ88 with a wbs element, it shows the following error :
Posting transaction is not possible (value date not allowed)
Message no. AA 478
Diagnosis
A retirement was already posted on the asset 000022400733 0041 on 20091231. Based on the value date 20091231 of the transaction, this transaction should have been included in the calculation of values for the retirement.
System Response
The transaction is rejected.
Procedure
Check the value date of the transaction.
In need to put year 2009 in date of the transaction, but it isnt posible. ¿Why? I dont know very much about asset accounting...

Hi
It is not allowing for WBS element final settlement, because of your asset already retairement was done.
By best suggetion is, You will create the new WBS element and transfer the all cost line items from old WBS element to new WBS element, then you will try to settlement for another asset in CJ88.
I hope it will use for you.
Regards
PVCPVC

ABUMN-error "Posting transaction is not possible (Value date not allowed)"

Hi,
When we are trying to transfer asset within company code thru Tcode ABUMN, we are getting a error as
"Posting transaction is not possible (Value date not allowed)"
What actually we are doing is we are trying to transfer the previous year asset for example say 01.04.2007 assets on today.
the Parameters are as below
Document date :26.03.2008
Posting Date :26.03.2008
Asset value date is 01.04.2007.
Then the system is throwing an error and not alloing to post the previous year transfers.
Can any one help me out.
Cheers
Sri

Hi,
I think, if you give old asset value date, system will give you the error. This may be because, you are trying to transfer the assets with old values, means in your examble the dep. from the 01.04.2007 to 29.02.2008 whould have been charged.
So, give the current year date means any date from 01.01.2008 to till date.
If you read F1 help for the value date column, it states,
Asset value date
The asset value date is the value date for Asset Accounting. It can deviate from the posting and document date and be in posting periods already closed for Financial Accounting. However, the posting year and asset value date year must be the same.
Since the asset value date can have a direct influence on the amount of depreciation, the system creates a default value when it can. You can specify in Customizing how the the default asset value date is determined by the system.
Hope it helps
Saravanan.A

Posting not possible (Value date earlier than capitalization date)

Hello , we are getting the error shown below. I'am not sure where to go to fix this can any offer any advice.
Thank you
Posting not possible (Value date earlier than capitalization date)
Message no. AA 322
Diagnosis
Asset 000000040048 0000 was first capitalized on 20080831.
You cannot post to an asset that was not yet capitalized.
Procedure
You have the following options:
Change the asset value date of your posting.
Capitalize the asset by posting an acquisition.

Generally this message will come , if you have created a asset with a capitalization date say 31/08/2008 and you are settling a Internal order for last period say 07 on with a posting date earlier than capitalization date , say 15/08/2008.
The System will not allow you to post because the value date cannot be earlier than capitalization date.
Change the value date to later than capitalization date and post.

Payroll not possible because data is missing: WPBP: 01 SV: 00 ST: 00

Hi,
I have created a new org structure with a set of employee. I have maintained all the needed infotypes ( 0000,0001,0003,0007,0008..)
When i try to run payroll for those emp's, im getting the error message:
Payroll not possible because data is missing: WPBP: 01 SV: 00 ST: 00 under rejected personal numbers.
What setting i have to do inorder to run payroll.
Rgds,
Ven.

Hello,
How absen quota 2006 is related to payrun..
However i have maintained all the said infotype, but still get the error .
Rgds,
Ven.
Message was edited by:
ven onk

Posting of retirement/transfer not possible (error in the asset)

Dear All,
I have been trying to retire 3 assets by ABAVN. After I try to simulate the posting, it says:
Posting of retirement/transfer not possible (error in the asset)
Message No.465
Diagnosis
An inconsistency was found for the asset 10 during the last recalculate values.
Posting was rejected,
Choose the function recalculate values in the master data maintanance transaction, and remove any inconsistencies.
My question is that what is the asset 10..is it the depreciation area? C's I haven't input 10 assets...only 3.
What is the recalculate values for asset master data maintanance? Is it the depreciation or other input to the asset master?
Thank you.
Emma

Hi,
I checked AFAR and found it would re-valuate 2 assets in 1999 and 2000 for depreciation area 10 (which is the tax depreciation). In 1999, the assets are retired partially. I am checking on the values AFAR calculated and find what happened that made it necessary to re-valuate the assets.
Thank you.
Emma

Event dates are not bolded by Date Navigator in Outlook 2010

Event dates are not bolded by Date Navigator in Outlook 2010 on my own calendar. Events are set to busy but it is not working. View Settings > Other Settings > "Bolded dates in Date Navigator represent days containing items" is
checked. This previously worked for 2+ years but recently stopped working. All plugins were disabled, Outlook 2010 was uninstalled and then re-installed. OST file was deleted and re-synchronized with Exchange 2007. While the OST was re-synchronizing the
bolding worked properly but upon next restart of Outlook it went away. Another symptom is that my Scheduling Assistant does not show my free/busy times correctly in my local view. If I look at my own schedule via the Scheduling Assistant of another user, the
free/busy times show up correctly. My webmail account also correctly shows bolded dates and free/busy suggesting that this is a local problem. Some screen shots below. Anyone have any ideas as to what I need to tweak? Using Oulook 2010 v.14.7116.500 (32-bit).
This is not a shared calendar.

Hi,
If you want to completely uninstall or remove Microsoft Office 2010, we can refer to the following article to do it:
http://office.microsoft.com/en-us/support/how-to-uninstall-or-remove-microsoft-office-2010-suites-HA104027750.aspx
Additionally, since the issue doesn’t happen in other computers, I think the issue may be also caused by some third-party programs in your original computer. If the complete uninstallation doesn’t help for this issue, I suggest we can try to perform a clean
boot in your Windows for more troubleshooting:
http://support.microsoft.com/kb/929135/en-us
Thanks,
Winnie Liang
TechNet Community Support

PC Suite 7 – Data transfer not possible. Check dat...

Similar Messages

Maybe you are looking for