Pc suite cleaner fails (unsupported version

I removed all nokia programs via the add/remove software option from the control panel and started the pc suite cleaner afterwards and got an error message that the version was not supported. Anyone have an idea?
Attachments:
PCSuiteCleanerLogFile_7-28-2007_145518.txt ‏1 KB

Hi frogger3d
You may need to get Windows Installer Cleanup Utility "msicuu2.exe" from Microsoft.com and run this to enable you to remove Nokia Connectivity Cable Driver and PC Connectivity Solution programs.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

  • PC Suite Cleaner fails

    Error message: "Could not create a list of directories. Please reboot your computer and try again." ...Obviously I've tried rebooting... God what is with this board, no CRs...

    Well PC Suite Cleaner finally went through and completed, but the above drivers are still listed in System Info, which says they are stopped and StatusK.
    They are not listed in Device Manager (yes I checked all the views).
    I have a new phone now, a Sony Ericsson K750i from which I cannot access the photos. Believe it or not, I photographed a burglar on that phone and the police want a copy. I suspect these Nokia drivers are the problem.

  • PC Suite versions fail to install & PC Suite Clean...

    Hello,
    I had been enjoying the full functioning use Nokia E51 phone and of PC Suite, from v7.1.18.0 to v7.1.26.0  on my home PC and business laptop without any issues.
    On my home PC running XP SP3 I upgraded from  PC Suite v7.1.26.0 to v7.1.26.0 successfully - no problems
    My problem is with my corp business laptop.
    This is running XP Pro SP2. On this laptop PC Suite v7.1.26.0 was working perfectly [and I have really appreciated it].
    However, on attempting to upgrade to the latest v7.1.26.1 after starting the installer, which opens, no progress is made and error .txt produce. I went to Add/Remove programs and successfully uninstalled the v7.1.26.0, and all other Nokia software to attempt to make a fresh install.
    Unfortunately even a fresh d/l of PC Suite v7.1.26.1 and new attempt to install fails with the same message about 1 second into the install process.
    I tried installing the PC Suite v7.1.26.0 but this too now errors with the same message.
    I downloaded PC Suite Cleaner 7.1.1 but I cannot get this to complete...the progress bar stops almost as quick as it appeared... 0% complete.
    I have tried rebooting... I have used jv16 to search for 'Nokia' re entries and deleted these in an attempt to clean install [I am experienced and competant in pc tech]
    However, the exact same issue is present....no progress for either the PC Suite installer or the PC Suite Cleaner.
    The Corporate McAfee Security Suite has no logs that would indicate that it is blocking either of these software.
    I have attached  the Temp dumptext files that are generate.
    Your assistance time and energy trying to solve this issue greatly appreciated.
    Regards,
    farfes
    Attachments:
    3565_appcompat.txt ‏4 KB
    1dcf_appcompat.txt ‏4 KB

    Hello Miksu,
    Yes, I know the folders in my XP laptop that you are talking about.I had removed them and saved them in another place in my attempts to make a clean install.
    Unfortunately no new logs are created during the failed install attempts.
    Yes, there is the .exe installer for v7.1.26.0 in the Installations folder but this fails to run.
    However, I did find the .msi installers [v7.1.26.0] for both PC Connectivity Solution and PC Suite - these are:
    PCCS.msi
    Nokia_PC_Suite.msi 
    I was able to run them in the order they are above and the install was successful and software fully functioning.
    So, what I would now like to try is installing v7.1.26.1 using the .msi installers.
    Where would I get clean copies of these for PCCS.msi and Nokia_PC_Suite.msi ?
    miksu...thank you very much for the focus you gave me on the Installations folder
    Thanks
    farfes.

  • Verification of VirtualBox Host Failed: Unsupported VirtualBox version

    I am configuring a VirtualBox Desktop Provider from the console. In Step 2.2 when i click next to veirfy the Certificate i get the following error
    Verification of VirtualBox Host Failed
    Unsupported VirtualBox version 3.0.12 on host ultra24.wfoo.org
    I used the VirtualBox from the bundled vbox_3.0.zip file and used vb-install. I did have the standalone vbox 3.0.12 installed before this. But i did remove the packages via pkgrm before running vb-install.
    Any pointers would be appreciated as i need to get this machine ready today for a demo.

    did you reboot the box after you uninstalled your first Virtualbox?, and reinstalling the new version, Virtualbox uses kernel modules and they someimes get wedged into the kernel and require a reboot to remove.

  • Pc suite install fail

    PLease help me.
    first all sorry for my bad english.
    when i install pc suite (last version)
    winxp sp2
    via usb ca-53
    office 2003
    the installation fail and at the of installation a lot of regsrv32 load dll error,
    after i can browse the phone (nokia 6280)and when i click on settings icon nothing happens.
    please what wrong, it became very frustating,
    i've alredy tried to unintsall all software, driver, used pc suite cleaner but alway the same error.

    This is what I did when I had trouble with a beta version of 6.85:
    Uninstalled ALL nokia software from my system.
    Deleted all leftover nokia folders.
    Checked msconfig and disabled all nokia services and startup items.
    Searched the registry and removed all nokia and pc suite entries.
    Updated to the latest version of the .net framework. You can find this at microsoft.com
    Checked that my system was fully up-to-date.
    Rebooted it.
    Installed 6.85.14.1 without any problems.
    Thats all the help I can offer with this issue.

  • PC Suite continuously fails to update

    I have PC Suite 7.1.18.0. The PC is running XP Pro SP3 with all the latest updates. Each time I start the PS Suite pops up a message in the notification area saying update available - click here to install. I do that, it shows v. 7.1.26 is available and I click the  download and install button. All seems to go well until the progress bar gets to 99% then it stops. Then I get the message that it failed to download from the server.It does this every single time.
    I'm getting rather browned off by this, not least because the version I already have works fine and there seems no way of suppressing the pop-up when the PC starts.
    Trying to get to Nokia Support itself is literally impossible. When you eventually find the form to contact them it wants the question and product. The fields to fill these in don't exist!
    Can anyone help?

    Hi,
    Its recommended that you always uninstall the existing PC suite and follow the instructions and check 
    Do have backup of your phone data & PC registries then Uninstall Nokia PC Suite, Nokia Connectivity cable driver, PC Connectivity solution, Nokia flashing cable driver(if any on your PC), Run PC Suite cleaner. Install latest Nokia PC Suite from europe.nokia.com/pcsuite, reboot your pc. Once pc started, connect your phone with USB in different ports of your PC and check

  • Uninstall Adobe Creative Suite 4 Web Standard with creative suite cleaner tool not working

    hi, I try to silently uninstall Adobe Creative Suite 4 Web Standard using the Adobe Creative Suite Cleaner Tool
    on a win7 x64 (french) computer so far with no success
    I tried
    AdobeCreativeSuiteCleanerTool.exe ‐‐removeAll=CS4
         in the log I get a ERROR: CS4 not recognized value.
    AdobeCreativeSuiteCleanerTool.exe ‐‐removeAll="Adobe Creative Suite 4 Web Standard" and  ‐‐removeAll=Adobe Creative Suite 4 Web Standard
    with the same error
    then I tried to create the cleanup  xml file by using the command AdobeCreativeSuiteCleanerTool.exe --createCleanup=c:\test
    it create the cleanup.xml file : (I un commented the cs4 product name manually
    <?xml version="1.0" encoding="UTF-8"?>
    <Products>
    <Properties>
              <Property name="eulaAccepted">1</Property>
              <!--<Property name="removeFlashPlayer">1</Property>-->
    </Properties>
    <CS4>
              <Product productName="Adobe Creative Suite 4 Web Standard" version="4.0"/>
    </CS4>
    <CreativeCloud>
              <!--<Product productName="Creative Cloud Installer" version="1.0"/>-->
    </CreativeCloud>
    </Products>
    as you can see there is none product listed (like dreamweaver, flash...that are on the computer)
    this is what i have in the log
    [Wed Mar 20 17:34:15 2013] Please enter (y) for Yes or (n) for No. ... >>
    [Wed Mar 20 17:34:17 2013] Processing create cleanup in SILENT MODE
    [Wed Mar 20 17:34:17 2013] Creating cleanup XML at: c:\adobeToolUninstaller\cleanup.xml
    [Wed Mar 20 17:34:17 2013] :: Start :: Iterating PDB
    [Wed Mar 20 17:34:17 2013] :: Start :: Iterating CAPS
    [Wed Mar 20 17:34:17 2013] [Coll ID: 74391d4c0f181c4d062cf4de6461d86]
    [Wed Mar 20 17:34:17 2013] AC: {88B22BFB-4ADC-4E16-9EE8-45EAB68E2FE1} Setup: 2.0.138.0 Name: Adobe Creative Suite 4 Web Standard
    [Wed Mar 20 17:34:17 2013] :: End :: Iterating CAPS
    [Wed Mar 20 17:34:17 2013] ::Start:: Writing to XML
    [Wed Mar 20 17:34:17 2013] [CS4] {88B22BFB-4ADC-4E16-9EE8-45EAB68E2FE1}, Adobe Creative Suite 4 Web Standard, 4.0
    [Wed Mar 20 17:34:17 2013] [CreativeCloud] {11111111-1111-1111-1111-111111111111}, Creative Cloud Installer, 1.0
    [Wed Mar 20 17:34:17 2013] :: End :: Writing to XML
    [Wed Mar 20 17:34:17 2013] Closing cleanup XML.
    [Wed Mar 20 17:34:17 2013] Cleanup XML created at: c:\adobeToolUninstaller\cleanup.xml
    [Wed Mar 20 17:34:17 2013]
    [Wed Mar 20 17:34:17 2013] *-*-*-*-*-*- ::START:: - SUMMARY OF Warnings -*-*-*-*-*-*
    [Wed Mar 20 17:32:56 2013] DB does not exist at: C:\Program Files (x86)\Common Files\Adobe\caps\pdb.db
    [Wed Mar 20 17:32:56 2013] DB does not exist at: C:\Program Files (x86)\Common Files\Adobe\caps\Media_db.db
    [Wed Mar 20 17:34:17 2013] *-*-*-*-*-*- :: END :: - SUMMARY OF Warnings -*-*-*-*-*-*
    [Wed Mar 20 17:34:17 2013] ---------------------------------------------------------
    [Wed Mar 20 17:34:17 2013] *=*=*=*=*=*=*=*=* :: End Session :: *=*=*=*=*=*=*=*=*=*=*
    then I ran the command AdobeCreativeSuiteCleanerTool.exe --cleanupXML=cleanup.xml , it proceeds through a lot of msi
    then errors with 
    [Wed Mar 20 17:40:29 2013] An error occured trying to remove payload from database: Adobe CSI CS4
    [Wed Mar 20 17:40:29 2013] finished updating installState
    [Wed Mar 20 17:40:29 2013] Deleting session: 74391d4c0f181c4d062cf4de6461d86 from ribs_collection and other associated tables
    [Wed Mar 20 17:40:29 2013] Updating caps schema pcd_meta to 2 if earlier version is less than 2
    [Wed Mar 20 17:40:30 2013] ..
    [Wed Mar 20 17:40:30 2013] Removing content of Product : Adobe CSI CS4, Version : 1.0.1
    [Wed Mar 20 17:40:30 2013] Ex: Incorrect number of bindings supplied. The current statement uses 1, and there are 38 supplied.
    [Wed Mar 20 17:40:30 2013] ERROR. Refer log at: C:\Users\ADMINI~1\AppData\Local\Temp\Adobe Creative Suite Cleaner Tool.log
    I reboot the computer, check add remove program, cs4 web standard is still here, and I can still launch the applications like nothing happened...
    but at this point if I try to manually uninstall (with add/remove program) i get an error message saying "cirtical errors during installation: program installation database is incorrect, reinstall from original support" (maybe not accurate as it's in french)
    same thing if i run manually the cleaner tool and go through the dialog.
    I don't know what else I can do, I've already spent a couple of hours with this issue.
    Any help / suggestion would be appreciated, thanks.         

    hi, thanks for your answer, actually this is what I have to do:
    I have to uninstall cs4 english to install it back in french. If I try reinstall with the french licence over the existing install, it starts in trial mode and ask for the licence.
    So if I follow your advice I should reinstall, uninstall, then reinstall ( and I have to do that on 30 computers, through SCCM, not manually)
    As you see it become quite complicated.
    An other suggestions?
    thanks    

  • Cannot uninstall PC Suite using PC Suite Cleaner!

    My PC Suite Installation 6.86.9.0 was not working properly anymore so I uninstalled it and attempted to re-install.
    However the uninstall apparently was incomplete such that the installer complained about it and stopped.
    PC Suite Cleaner (3.6.002)(does not resolve the problem either since in cannot operate on the installed PC Suite version!
    Any help appreciated.
    Kind regards, Waldemar

    Playing within the registry of XP can be quite dangerous. Have you tried rebooting your computer? Try to install pc suite again after a reboot.
    If not, open the list of installed programs and find pc suite (if it's still shown in there of course) and uninstall it. I guess it will come with a message that it might already be uninstalled but hopefully it will remove the entry there if there is one no matter what error message pops up.
    Then install ccleaner  and remove all trash and run a registry scan on it. Hopefully this would remove all corrupted or invalid entries and maybe fix it. It's at least a safer way to remove dead ends in the registry than doing it your self.
    Reboot the computer and try to install the pc suite again.

  • Adobe Creative Suite Cleaner Tool

    Windows 7
    I already have the Creative Suite for CS5
    I have recently purchased the license for and downloaded some programs with Creative Cloud
    Question about the article at http://www.adobe.com/support/contact/cscleanertool.html
    The first paragraph states:
    "The Adobe Creative Suite Cleaner Tool helps resolve installation problems for Adobe Creative Suite 6, Adobe Creative Cloud, Adobe Creative Suite 5 - 5.5, Adobe Creative Suite 4, and Adobe Creative Suite 3 software."
    Item 7, near the bottom states:
    "Now you can proceed with your installation of the desired shipped version of the Creative Suite"
    My question should be obvious:
    Which is it?
    Does the Creative Suite Cleaner Tool apply to Adobe Creative Cloud or to the shipped version or to all listed in the first paragraph?
    This is another example of why SO MANY OF US are so frustrated by your support.
    Please answer the question without a link to another article with contraditions or, for that matter, any article.
    It's a simple question.
    I am spending MANY hours trying to correct YOUR error, which leads to Creative Cloud install failures. And, yes, I have gone to the forums, to the community, and have replied, and continue to read support's circuituous excuses and misdirected answers.
    Thank you.

    The Adobe Creative Suite Cleaner Tool helps resolve installation problems for Adobe Creative Suite versions 3-6, and Creative Cloud. The tool can clean up install records for prerelease installations of Creative Suite products. The CS  Cleaner Tool does not interfere with existing installations of previous versions of Adobe Creative Suite products.
    Please refer the link: http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  • Error occures when try to download Download LiveCycle Enterprise Suite Update 1 trial version

    when i am tring to dowanload LiveCycle Enterprise Suite Update 1 trial version from
    http://www.adobe.com/cfusion/tdrc/index.cfm?product=livecycle
    Akamai Download Manager - Error comes & i am not able to dowanload.
    on screen -
    File Name:JBoss_EFGJ_DVD.zip
    Progress: 0%
    Status : Error
    & OS is windows Vista please give me solution for this.
    I have already seen all steps which are given in download help.

    With the dialog box open from the failed download, open a new browser window and type in the url listed in the download window.
    You will not be using their utility, but I have never had that work for me.
    HTH
    Mark

  • Office 365 hosted Exchange Outlook 2013 "The resource you are trying to use is located on an unsupported version of Microsoft Exchange"

    I have Outlook 2013 downloaded from my Office 365 account and am getting the error "The resource you are trying to use is located on an unsupported version of Microsoft Exchange".  I have added all the steps I have followed so far below.
    We changed over to the Office 365 hosted Exchange from 2003 Small Business Server yesterday.  I have backed up my Outlook 2010 then uninstalled all Office applications and rebooted.  Then downloaded the Office 2013 suite from my account
    and installed it.  Ran the desktop setup to "Set up your desktop applications to work with Office 365."  Went to the control panel and launched the mail tool, made the
    profile and named it Outlook and it auto filled with the correct info.  Clicked Next and it all checked as good, but when I launch Outlook I get the error "The resource you are trying to use is located on an unsupported version of Microsoft
    Exchange".  I have rebooted the laptop and recreated the account three times with the same results.
    Any suggestions?

    OK.  So we solved the problem.  At least in my case.
    We deleted the profile again then jumped on a neighbors wifi and then ran the desktop setup from Office 365 again.  Then we launched the mail setup tool, created a new profile and entered the information for the account.  After this took we launched
    Outlook and everything is working fine.
    One thing to point out is that prior to the time that it worked, when I would create the profile and open it to set it up, it would auto fill the two available fields Name and Email Address.  On the last run it didn't auto fill and I had four fields
    to fill out.  Name, Email Address and Password (x2).
    Hope this helps someone.

  • Ovi Suite Unistalled - But New version ask repair ...

    Friends,
    Phone: C5-03
    Need Help, I had nokia ovi suite 3.3.86 installed however when a update message was received for version 3.4.49 i got message "Some thing went wrong, cannot create file name already exist". After lot of frustration i uninstalled ovi suite / cleaned registry / uninstalled connectivity driver, etc.
    Then I tried to installed new version 3.4.49 however, i got same message several times again.
    So finally i decided to install old version 3.3.86 but now it asks for Repair or Uninstall when i tried repair it gives message cannot locate file Nokia suite setup.msi when i tried uninstall got same message.
    Request to help in above case how do i install 3.3.86 or if i can still be able to install 3.4.49.
    Thanks !

    The thread in reference is the one I have pasted the link for.. What I meant was that, that thread is not soved yet..still you could try the suggestions there-in. Since, you mention that you did not get any solution thru' any other thread on this Forum, I suggest you to report the issue (log) as mentioned...

  • Unsupported version Error while generating header and footer for the PDF

    hi
    I want to genrate header and footer for the PDF file however on the call of the EndPage class i got a Unsupported Version Error Unsupported major minor Version Error and Class loader Define class
    What has gone wrong ?.

    Can you provide more information about what you were trying to do? In particular, what does your code like like?
    Also, can you include the stack trace, and the complete error message?

  • Import Error: The document was created with an unsupported version of Word.

    This is the message I get when opening up a Word doc from a cross-country client:
    *Import Error*
    The document was created with an unsupported version of Word.
    Unfortunately, he's out of touch for the next week so I have no idea which version he is using...although a look using BBEdit reveals this in the footer of the doc: Microsoft Word for Windows.
    Is there a list of supported and unsupported versions of Word, so I can be prepared for my next encounter with this message?
    Message was edited by: Alan Bucknam

    If you can open it up, is the formatting of great importance, or is it just the information you need? If its info, copy from BBEdit and paste into your Pages doc. Sometimes you can open it in text edit and then save as a different format. (I think its text edit, one of the OSX word processors opens word docs ok.)
    Sorry, this also appears as a problem in Numbers (believe it or not, its also a problem with Office 2007 for windows too). The explanation gets a bit complicated, but there are so many variations of how a M$ document is created. (not all docs are made by M$ products remember, but exported from other programs on different systems, even if it says "Word for windows").
    Because of the varied amount of things that can be wrong (that M$ products seem to overlook, or fill in the gaps that would normally cause an error), there is no hard list of non-compatible versions.
    This is just as we ( a bunch of nerds here and around the web), have found out from experimenting with different versions and such.
    hope this helps and hope the copy paste or save as works for you.

  • "This document was created with an unsupported version of Excel. Only documents created with Excel '97 or later can be opened.

    I keep getting this message when I try to open an Excel file "This document was created with an unsupported version of Excel. Only documents created with Excel ’97 or later can be opened.

    You could try opening the Excel document with LibreOffice and then resaving it in a compatible version before opening in Numbers.
    Jerry

Maybe you are looking for

  • Future Simulation Report, using OBIEE or Hyperion

    Dear All, I have a requirement to create a simulation of the future maintenance schedule, and future machine usage. We got option to use OBIEE and Hyperion. I have little experience with OBIEE and I think it can be achieve using 'what if model' and '

  • Netboot Issues

    I am having trouble with netboot.  Clients show the image as the boot disk, but when i restart it flashes the globe, then a circle with a slash through it, then shut off.  The following is the system log: Jan 17 10:59:31 macserver bootpd[27142]: serv

  • How to import a music file into garage band ?

    Hello everyone, I am new to Garage Band, pardon me if my question is too basic. I am trying to record a vocal. But friend has sent me a music recording (mixture of guitar & piano, without vocal) in mp3 format. I want to put this mp3 file in another t

  • Changing DAAP Share Name

    Hello, After upgrading to iTunes 7.2 I can't seem to change the share name on my DAAP Share it has reverted to what my username is... on Both my windows and OSX machine. Was this intentional? If so I must say poor move by apple.

  • Are the forum RSS feeds broken again?

    W3C validator says the RSS feed - for example for this forum - 'does not validate'. Thunderbird also complains that the feed is invalid. Jonathan.