PCA for Full Balance Sheet Accounting
Dear SAP Guru,
We're currently in 4.7. We've implemented PCA for Profit and Loss Accounting. There's business requirement to produce Full Balance Sheet Accounting in PCA, i.e. the one similar to Business Area. Can the standard PCA module (in 4.7) support Full Balance Sheet Accounting? If can, what are the settings and steps that need to be configured in the system? Thanks in advance for your assistance.
Hello,
you can get the full balance sheet from PCA.
The steps are:
1. You must make sure that you have completed financial statement version (OB58).
2. Copy this account groups to PCA. (Please check the paths to copy the FSV to your PCA.
3. See the available reports in KE80. One of the report must suit your requirement.
4. If they are not suitable to your requirement, create your own balance sheet format (using form and report) - Report painter.
Hope this helps you.
Regards,
Ravi
Similar Messages
-
Can we create a cost element for a Balance Sheet account?
Hi folks,
Is it possible to create a cost element for a balance sheet account? If yes, what are the scenerios we would need it and how is it done?
thanks in advanceHello
Please review the below information regarding cost elements category 90 : Financial Accounting Balance Sheet Accounts
Category 90 is automatically assigned when you create cost elements in CO whose general ledger accounts in FI are asset reconciliation accounts
(special balance sheet accounts), not income statement accounts. You
cannot change this category in CO master data maintenance.
FI does not require CO account assignments to cost elements of
category 90. However, if you enter an account assignment, it is only
recorded statistically for real objects.
Category 90 allows you to check order or project budgets for fixed
asset procurement. To do so, enter the investment order or WBS element
in the corresponding field in the asset master. The Asset Management
component ensures that the order or element automatically appears in
the document when you access the asset procurement.
The R/3 System debits the order/WBS element statistically in the
Controlling component, which you can then monitor with availability
control.
You can treat cost elements of category 90 as activity-independent as
part of cost center planning.
Also see note 75980 for further information. From the note:
The use of cost element category 90 is only provided in the standard
system in the following two cases:
1. As of Release 3.0G, asset acquisitions and down payments which are
assigned directly to a fixed asset or asset under construction can
be assigned to an account on internal orders or WBS elements
statistically. In this manner, for example, an availability check
can be triggered on the order or the WBS element for asset posting.
2. As of Release 4.0, cost elements of category 90 can also be created
for material stock accounts to display material make-to-order stocks
on sales orders or customer projects.
Regards
Javier Reviriego -
Cost center empty in general ledger view for balance sheet accounts
Hi !
We are implementing ECC6 with new GL functionalities. We activated differents scenarii: cost center, profit center and segment.
Using FB03 (display document) we noticed that in the entry view, everything is fine: cost center, profit center and segment are filled successfully.
However, in the New GL view, the cost center is not filled for balance sheet accounts.
Any solution?
Regards,
JulienHI,
Cost center will never be filled for the Balance Sheet account. For Balance sheet account Profit Center is required to be filled.
Don't be afraid this is the fundamental practice across the globe. Cost centers will be filled in only Expense account.
Exception to above rule is Asset master will recieve cost center because this will help in determining asset per department.
Regards,
Chintan Joshi. -
Inheritation of tax codes in G/L balance sheet accounts (New GL)?
Hello everybody,
one of my customers is migrating to New GL, where they want to use document split for some fields.
For some balance sheet accounts the they also want to inherit the tax code to the balance sheet account line (for reporting purposes).
Is it possible to inherit also the tax code to a splitted balance sheet line?
Thanks in advance for any help,
AngelaHi Angela,
as Nauma already posted, inheritance is only possible for document split characteristics and tax code is not such a characteristic.
But even if its possible to inheritate / substitute the tax code into the BS sheet line item, what if the posting contains different tax codes (eg visiting an austrian restaurant: the bill contains 10% VAT items (Food) as well as 20% VAT items (beverages wo milk))?
What should be the rule for BS account tax code? So the requirement sounds strange...
Best regards, Christian -
PCA report for balance sheet accounts
Hi,
i have assigned Profit Center in Material.
So the Cunsumption account hit the Profit center.
If i see the GL document profit center assigned at line item, but i couldnot able to view the PCA report for Balance sheet account
Can you please help.
Thanks,
SudhaHi Wamman,
We are in ECC 6 and New GL is not activated.
Clssic PCA maintained PC in 3KEH.
Assigned PC in Material Master consumption entry Consumption (P&L) to Inventory (B/S)
Consumption (P&L) updated with Profit center and PCA document created
Inventory (B/S) line updated with Profit center but PCA document was not created.
Kindly help
Thanks,
sudh -
Transfer normal balance sheet accounts to PCA
Hi All,
Following 4 T-codes are available for transfer of balance sheet accounts from FI to PCA
1KEH EC-PCA: Transfer Material Stocks
1KEI EC-PCA: Transfer Assets
1KEJ EC-PCA: Transfer Work in Process
1KEK EC-PCA: Transfer Payables/Receivables
How do i transfer any other balance sheet account to PCA [other than through Default Profit Center (3keh)]
Regards,
Shridhar.Hi Daniela, hi All, because this is my first posting I would like to introduce myself. I'm working with SAP since 1996, I'm certified FI and CO. I used to work as a consultant for six years and now I'm Inhouse SAP with Gerresheimer. http://www.gerresheimer.de/en/home.html
We are supporting our people around the world and also we are putting in new SAP systems in our organisation. Currently we have three different clients world wide, with different organizational levels. We are on SAP ECC 6.0 however not using the new GL yet.
So far so good ;-)..
===========
We are currently in the US trying to switch on balance sheet accounting for PCA due to business unit requirements.
We've got:
- Assets
- Material
- AP and AR
working! All with periodic transfer which we found more stable then online. When created the opening balances did match for AP and assets to FI and AR and material were just a little bit of, that was great.
Now we are running into the problem with all the other balance sheet accounts and still we are reading documentation, OSS Notes and all kind of stuff, but still we have problems. The issues are:
- Do we have to assign every account in 3KEH which is not covered by assets, ap/ar, and material? We tested it with a bank account and it is working, but the table in 3KEH only gives you the option of one PC, plus you can use derivation rule. Ok, there is a user exit but we are not sure about that...
- Why can't we use the profit center which is populated in the balance sheet account? Every BS account has the radio button 'profit center required' for example we have an accrual account in the PC is in there, we can see it, put when we move the FI document over with 1KE8 nothing happens.
- On the other hand we had an account and it was just working the way I described with 1KE8, the document was moved over to PCA.
We are really a little bit confused, since assets, AP/AR and material worked so well, we seem to be blocked on the other accounts and not sure what is the best way to go.
Any response is highly appreciated!
With best regards and all the best,
Thomas
Edited by: Thomas Sablonski on Jul 23, 2008 5:43 PM
Edited by: Thomas Sablonski on Jul 23, 2008 5:46 PM
======================================
We have got it working 100% looks nice...
basically the answer :
'- Do we have to assign every account in 3KEH which is not covered by assets, ap/ar, and material? '
is YES.
Thanks and regards,
Thomas
Edited by: Thomas Sablonski on Jul 24, 2008 11:40 PM -
Budgeting for balance sheet accounts
Hi Expert,
I have activated the profit center accounting for my company. Now the users can use the PCA functions. They are planning to do budget process in SAP. There is no problem to enter budget for P&L accts. But they want to enter budget for balance sheet acct as well.
how to set the configurations to allow entering of budget for balance sheet accts ? Please advise the stepo by step procedure. After done with the configurations, any additional month end closing steps to be performed ? Do I stuill need to create cost element accts for the balance sheet GL accts, like the cost element for P&L accts ?
Thanks.
Angel.Hi,
I assume by referring to Budgeting, you require Availabiility control as well.
Budgeting and availability control for Balance sheet and P&L accounts is available in Funds Management under Public sector Management functionality.
Njoy
Siva -
Transfer figures on balance sheet accounts from FI to PCA via 1KEK
Hello all,
at first sorry for my english.
SOS! I need help.
We make transfer dates from FI to PCA for customer/ vendor reconciliation accounts. We made 1KEK run in period 5 and everything was ok. But after the run for period 6 the calculated figures are summing up period 5 + 6. For example in FI GL period 5 - 1000 euro, period 6 - 400 euro. Test run 1kek for period 6 shows 1400. So we have difference between FI and PCA 1000 euro. For every next period the dates are summing up from first transfered period to current period.
May be anybody know such problem and can help me.
BR
Anna GrudininaThe following balance sheet items can be transferred online in realtime:
Material stocks
Assets
Work in process
Other balance sheet items (transaction-based only)
The system posts balance postings directly to Profit Center Accounting from online postings which directly affect the balances of assets, materials and work in process. If you have line items in Profit center Accounting, the system updates a profit center document for each reference document (e.g. MM or FI document).
We can transfer the following balance sheet items to Profit Center Accounting in the standard SAP system at end of period:
Payables and receivables -
PCA-MIRO: Porfit center on balance sheet accounts
Dear Experts,
I face the following issue:
During invoice verification (MIRO) the profit center which was mentioned in the Purchase Order (the profit center to be assigned on P&L account during Goods Receipt and, if applicable, during invoice verification on the P&L account in case of differences) is assigned on the GR/IR balance sheet account in despite of balance sheet accounts are not transferred to PCA.
It is an issue because it multiplies the number of line items during invoice verification (one line item for each profit center). Due to that, substitution would not be an solution since it will erase the profit center but not concatenate line items. Field status group of my GL account set the profit center field as "suppressed". MM field status group cannot be changed since the profit center is useful for the P&L account.
I believe the solution should be in MM and line item summarization, but I cannot succeed.
Please, could you support me?
Many thanks in general for this forum and in advance for your help,
King regards, Gregory.Hello
Like FI field status groups, where we can manage screen field control, there are field status groups for movement types.
So in MM check FSG for these movement types and make them optional. It is somewhere in IMG in MM.
Hope you would get values.
Reg
assign points if useful -
Hi,
If I only activated PCA to capture the balance sheet accounts (Profit & Loss will be done strictly in COPA), can I left the field PC assigment in Cost Center Master Data to be empty?
Because the structure of the CC is in departement view, while the structure of PC is based on Product Hierarchy.
And I need to create the Balance Sheet Report based on the product hierarchy as in PC hierarchy.
Could any body advice me regarding the mater, like what is the implication if I left the PC assignment blank in CC master data.
Any help would be appreciated..
Thanks
LeaIf you do not assign any profit center to a cost center, anyhow the system would assign them to a default <b>Dummy Profit Center</b> which makes it more difficult to reconcile Cost Center Accounting and Financial Accounting. It is therefore recommended that you assign a profit center to each Cost center.
The following are some more analysis based on SAP documentation on concept and PCA assignments with reference to your dilemma of how to assign profit center to cost center which has been designed based on different characteristics namely product hierarchy versus function.
You have divided your company into profit centers according to product hierarchy.
This makes it difficult to assign cost centers that are divided by functions, to a profit center, which is divided by another attribute. i.e. product hierarchy. This can be apparent in a case, where, a production cost center may be performing activities relating to products which fall under multiple profit centers.
In these cases, you may want to assign these cost centers to one profit center (for example, "Production A"). If the cost center then performs activities for a production order, the system however credits the profit center "Production A" as well as the cost center at the time of settlement. You can then either settle the over-/under absorption from the cost center (for example, to a profitability segment) or allocate it directly to the corresponding product hierarchy in Profit Center Accounting.
It is often not possible to assign administration cost centers directly to a profit center. In this scenario, you can create profit center named <b>service profit center</b> or <b>allocation profit center.</b>. Then you may assign the admin cost center to the service profit center or allocation profit center. This profit center would then contain all the administrative costs which occur. At the end of the period, you can then either settle this over-/under absorption from the cost center (for example, to a profitability segment), with assignment to a service profit center.
To simplify you can ideally assess or distribute it directly in Profit Center Accounting, with the allocation profit center as the sender. In either case, the corresponding profit center is credited at the end of the period. -
Business Area is not pulling for Balance Sheet Accounts
Hi,
For few Balance Sheet GL Accounts (From MM side), Business area is not pulling while doing MM Cycle. For other Balance Sheet GL Accounts (From MM side), system is pulling the Business area by default.
I have checked all the Field Status Group configuration and all. Still could not find the route cause for this. Can any one help me why it is not pulling Business area for Balance sheet accounts when doing MM cycle.
what should i do if system has to pull Business area for Inventory Related Balance sheet GL Accounts?
Kindly Help me..
Thanks
SunilHi,
in OMJ7, assignement were there properly. Still why i am not able to pull Business area for Balance Sheet Accounts.
I Can give one Clue: For Inventory Finished Goods, system is pulling Business area and for Inventory Raw material and Inventory Semi-Finished Goods system is not pulling the Business area.
This is my problem...
Thanks
Sunil -
Message no FH017 Open item management only allowed for balance sheet accounts
Dear All,
i try to change one Balance Sheet account to P&L Account. However i failed changing the account.
it pops up the error Message no FH017.
For this error, i have already untick the Open Item Management
Can anyone help me on this? Very appreciated on this!
Cheers
JillAslo see help on open Item managed field by pressing f1
Indicator: Open Item Management?
Determines that open items are managed for this account.
Use
Items posted to accounts managed on an open item basis are marked as open or cleared. The balance of these accounts is always equal to the balance of the open items.
Procedure
Set up accounts with open item management if offsetting entries are to be assigned to the postings made to these accounts. Postings to these accounts represent incomplete transactions.
Example:
A goods receipt/invoice receipt (GR/IR) clearing account should be managed on an open item basis so that you can check at any time whether invoices have been received for the goods received for an order.
Set up accounts without open item management if no offsetting entry is to be made against a posting to this account.
Examples
Accounts that are managed on an open item basis include:
Clearing accounts:
Bank clearing account
Payroll clearing account
Cash discount clearing account
GR/IR clearing account
Accounts that are not managed on an open item basis:
Bank accounts
Tax accounts
Raw material accounts
Reconciliation accountsThese are managed implicitly using the subledger open item function.Profit and loss accounts
Materials Management (MM) accounts posted with a posting key that has account type 'M' -
Message FH017 Open item management only allowed for balance sheet accounts
Hi,
While creating a new GL account with P&L type it's giving the above message. If I select the BS type indicator, it's saving without any error.
I observed, account group selection is creating this problem. Since creation of other accounts in other accounts groups doesn't get such problems.
Any clues??
Thanks in advance
Durga.Subscribe | Add to Favorites
Note 155317 - G/L a/c:change bal.sheet->P+L despite OI management Note Language: Version: 4 Validity: valid since 14.09.2000
PDF Download Corrections Compare Versions SSCR
Go to SAP Note: Display
Content: Summary | Header Data | Releases | Support Packages | Correction Instructions
Summary
Symptom
You can change the control of a G/L account from a balance sheet account to a P&L account, although the account is set to open item management in at least one company code.
Additional key words
SAPMF02H, FS02, FSP2, FH017
Cause and prerequisites
This is caused by a program error.
The corresponding check was not carried out if you did not branch to the screen of the company code data when making changes.
Solution
The error is corrected as of Release 4.6.
You can make the advance corrections.
Header Data
Release Status: Released for Customer
Released on: 13.09.2000 22:00:00
Master Language: German
Priority: Correction with medium priority
Category: Program error
Primary Component: FI-GL-GL-N Master Data
Affected Releases
Software
Component Release From
Release To
Release And
subsequent
SAP_APPL 30 300 31I
SAP_APPL 40 40A 40B
SAP_APPL 45 45A 45B
Correction delivered in Support Package
Support
Packages Release Package
Name
SAP_APPL 31I SAPKH31I27
SAP_APPL 40B SAPKH40B20
SAP_APPL 45B SAPKH45B03
SAP_HR 31I SAPKE31I27
SAP_HR 40B SAPKE40B20
Corrections Instructions
Correction
Instruction Valid
from Valid
to Software
Component Last
Modifcation
97629 45B 45B SAP_APPL 14.09.2000 08:26:11
97661 300 40B SAP_APPL 14.09.2000 08:28:04 -
Condition type for fee - no change of moving price or balance sheet account
Hi, hope you can help me.
We need a new condition type for a kind of fee which has to be paid to the vendor and used in the purchase order.
This is a condition type which
- has to be part of the invoice
- has to be posted as a kind of accrual
- must not! change the price of the material or the balance sheet account
If we use freight conditions the moving price is changed.
Because it is dependent on the material (and therefore a condition record works great) we can't or better don't want to use a second position in the purchase order.
Does anybody have a solution for this one?
PCThanks for the answer!
This is what I already tried, but it still changes the balance sheet account and the moving average price.
This is what I customized:
Condition ZXYZ
Cond. class A
Calculat.type C
Cond.category B
Item condition yes, delelte, amount/percent and Qte relation yes
Scale base C
Accruals yes
In the Calculation Schema it's defined just before the Actual Price, with Statistical-checkbox marked and Account key ZE1, Account key - accruals / provisions ZE2.
Do you have any idea what I have to change or what else to try?
Thanks a lot! -
JVA: CutBack for Balance Sheet Accounts
Hi all,
We have some business requirements where for some specific processes we need to cuback the amounts regarding Pre-Payments or depreciation amounts of non-production assets (moveable assets like cars).
The problem seems that those amounts are in Balance Sheet accounts (of course, for the depreciation amounts the P/L side can be cutbacked without issues).
So, my question is; How can we cutback the amounts posted to the Balance Sheet GL accounts since these don't require any cost object.
Br,Hi there,
GJ49 and GJ83 will not help in this case.
you have to use substitution rule in FI and JV to default recovery indicator for balance sheet cutback
kindly note based on the billing indicator you have chosen at company code recovery indicator derivation will work, you can however overwrite using substitution
I hope this helps
Thanks & Regards
Kalpesh Chavda
Maybe you are looking for
-
We have just bought a second iPad and have started it up using same apple id as first device. We want to share iTunes purchases etc but don't want to share contacts, calendar etc. what is the best way of managing two iPads within same household?
-
INDIA - Subcontract Process- Creation of Excise Invoice T-code J1IS
Dear All, We are placing most of the purchase orders on subcontractor labour basis & raw material steel is being supplied by us to subcontractor. Transfer posting Movement type 311. After creation of material document Excise Invoice is created using
-
Errors in Runtime workbench after support pack stack 12
We have installed support pack stack 12 and now the runtime workbench - component monitoring is not working. I get a page of errors. here are some of the errors Unknown error: com.sap.engine.services.servlets_jsp.server.jsp.exceptions.CompilingExce
-
Hi, quick question-- Am I right in assuming MXF files cannot be as easily imported and edited in FCP 5.1.4 as well as FCP 6? I run a computer lab at a college and our machines are running 5.1.4, and one of our students shot on a Panasonic HVX200, whi
-
I'd like to do my website with URL alias like that " http://www.myside/mails/1432". Can I configure in Server side or Client side with coding. Server is CFMX-7 and IIS6. Any solutions will be appreciated.