Pcmcia token ring card problems or how to compile a module?

i have a pcmcia token ring ibm card. i run 2.6.23-ARCH kernel. I know that the correct module is ibmtr_cs (from a previous distribution). When i trie to modprobe ibmtr_cs it tells me that the module doesn't exist. Searching my system i found that in /usr/src/linux-2.6.23-ARCH/include/linux/ibmtr.h there is something like a module... Does this mean that i have to compile my own kernel? in this case how can i do it? is it possible to compile only the module?
thanks nik
Last edited by nicnikf (2008-01-18 19:57:08)

nicnikf wrote:
i have a pcmcia token ring ibm card. i run 2.6.23-ARCH kernel. I know that the correct module is ibmtr_cs (from a previous distribution). When i trie to modprobe ibmtr_cs it tells me that the module doesn't exist. Searching my system i found that in /usr/src/linux-2.6.23-ARCH/include/linux/ibmtr.h there is something like a module... Does this mean that i have to compile my own kernel? in this case how can i do it?
thanks nik
Maybe you only have to compile that module, for your kernel, instead of a whole kernel recompile? On how to do that, I don't know, sorry.
Maybe someone else knows.

Similar Messages

Connecting ethernet to token ring

I'm having trouble trying to configure cisco 2612 router to connect SNA server to datacenter host. please refer to connectivity below.
SNA server--eth----router--t/r--control unit--modem-SDLC---modem---FEP
the controller unit has token ring card installed on it and it's connected to router's t/r port..i configured the router with SR/TLB but no success, what we did we temporarily removed the router and add token ring adapter on the same SNA server then connect direct to control unit and it's work but we need to implement the connectivity shown above..thanks

Hi Matthias,
working topology:SNA server with 2 NIC ethenet and T/R
--eth-SNA-t/r---control unit-modem--sdlc--modem--FEP
with router:not working
SNA-eth-router-t/r-control unit-modem-sdlc-modem-FEP
please checked the router config below, thanks
Current configuration : 686 bytes
version 12.1
no service single-slot-reload-enable
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
hostname Router
enable secret 5
ip subnet-zero
no ip routing
source-bridge ring-group 20
source-bridge transparent 20 10 2 5
interface Ethernet0/0
ip address 10.10.50.2 255.255.255.0
no ip route-cache
bridge-group 2
interface TokenRing0/0
no ip address
no ip route-cache
ring-speed 16
source-bridge 5 2 20
ip default-gateway 10.10.50.1
ip classless
ip http server
bridge 2 protocol ieee
bridge 2 bitswap-layer3-addresses
line con 0
line aux 0
line vty 0 4
password
login
Ethernet0/0 is up, line protocol is up
Hardware is AmdP2, address is 000e.3853.fae0 (bia 000e.3853.fae0)
Internet address is 10.10.50.2/24
MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:00, output 00:00:01, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue :0/40 (size/max)
5 minute input rate 1000 bits/sec, 2 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
3789 packets input, 364786 bytes, 0 no buffer
Received 2964 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 input packets with dribble condition detected
354 packets output, 39668 bytes, 0 underruns
0 output errors, 0 collisions, 1 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped out
TokenRing0/0 is up, line protocol is up
Hardware is HAWKEYE, address is 0070.1cca.5f87 (bia 0070.1cca.5f87)
MTU 4464 bytes, BW 16000 Kbit, DLY 630 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation SNAP, loopback not set
Keepalive set (10 sec)
ARP type: SNAP, ARP Timeout 04:00:00
Ring speed: 16 Mbps
Duplex: half
Mode: Classic token ring station
Full duplex capable
Source bridging enabled, srn 5 bn 2 trn 20 (ring group)
spanning explorer disabled
Group Address: 0x00000000, Functional Address: 0x0800011A
Ethernet Transit OUI: 0x000000
Last Ring Status 00:05:14 (0x2000)
Last input 00:00:00, output 00:00:03, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue :0/40 (size/max)
5 minute input rate 1000 bits/sec, 1 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
2794 packets input, 449251 bytes, 0 no buffer
Received 962 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
390 packets output, 31117 bytes, 0 underruns
0 output errors, 0 collisions, 8 interface resets
0 output buffer failures, 0 output buffers swapped out
0 transitions

How to print the Module pool screen using a push button in the screen

Hi Every one,
i have developed a module program , which have a selection screen and it display the output in a structured way.
output includes boxes, texts etc...
my problem is :---
How to print the Module pool screen using a push button in the screen.

When the "Print" button is pressed:
leave to list-processing and return to screen 100. "(current screen)
Call a transaction that runs your print program.
Rob

How to compile virtualbox host modules dkms for chroot in android x86?

Hi all,
I am running arch linux using chroot method in android phone (asus zenfone 5 intel processor). I want to install and run virtualbox in that environment. I have kernel source of my phone, I do not know how to get kernel headers and install them in chroot environment, can anyone guide me on how to compile virtualbox modules and run virtualbox in chrooted environment on android x86?

Hi all,
I am running arch linux using chroot method in android phone (asus zenfone 5 intel processor). I want to install and run virtualbox in that environment. I have kernel source of my phone, I do not know how to get kernel headers and install them in chroot environment, can anyone guide me on how to compile virtualbox modules and run virtualbox in chrooted environment on android x86?

HT1871 Hello i have one IPhone 4S and I use 3G net in my mobile sometime I have problem with temperature in my phone at the SIM card or battery how can I fix this problem. By update or version of 6.1.3

Hello i have one IPhone 4S and I use 3G net in my mobile sometime I have problem with temperature in my phone at the SIM card or battery how can I fix this problem. By update or version of 6.1.3

Could it be because the SIM card got damaged while I cut it to fit the IPhone?
Very likely. Hard to believe the carrier in Mexico doesn't have a micro-SIM card available.
Or somehow the Chinese carrier found out and locked it?
No, which is not possible.
What can I do? Get a new SIM and see if it works again?
Get a micro-SIM from the carrier in Mexico that you don't have to manually cut down. If that carrier doesn't provide one, switch to another carrier that is not so low-budget.

How to handle DLSw for SDLC and token-ring to same remote peer

We have the need to have SDLC and token-ring connections from one local router to a the same remote site. Currently we have a remote peer for token-ring:
dlsw port-list 10 TokenRing0/0
dlsw remote-peer 10 tcp a.b.c.d lf 1500
We have an SDLC link on a serial port. I understand that SDLC is part of group 0. How do I also get the SDLC traffic to the same remote peer? Is it as simple as adding another remote peer statement to the same IP?
dlsw remote-peer 0 tcp a.b.c.d lf 1500

Do you have your token ring configuration complete to bridge to DLSW ?
for example;
source-bridge ring-group 2000
dlsw local-peer peer-id 150.150.10.1
dlsw remote-peer 0 tcp 150.150.10.2
interface loopback 0
ip address 150.150.10.1 255.255.255.0
interface serial 0
ip address 150.150.11.1 255.255.255.192
interface serial 1
description PU2 with SDLC station role set to secondary
no ip address
encapsulation sdlc
no keepalive
clockrate 9600
sdlc role primary
sdlc vmac 4000.9999.0100
sdlc address 01
sdlc xid 01 05d20006
sdlc partner 4000.1020.1000 01
sdlc dlsw 1
interface serial 2
description Node Type 2.1 with SDLC station role set to negotiable or primary
encapsulation sdlc
sdlc role prim-xid-poll
sdlc vmac 1234.3174.0000
sdlc address d2
sdlc partner 1000.5aed.1f53 d2
sdlc dlsw d2
interface tokenring 0
no ip address
ring-speed 16
source-bridge 100 1 2000
source-bridge spanning
If your SDLC link is working through DLSW (it is in DLSW ring group 10 according to your first configuration statement and port list statement and must match at both ends), it should be an easy modification to add the token ring configuration to join the bridge to the remote DLSW router.
See;
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fibm_c/bcfpart2/bcfdlsw.htm#1003756
best of luck

I have viber installed on my iPhone. But whenever I receive a call from Viber, it would not ring. How do I fix this problem? How do I make it ring with incoming call?

I have viber installed on my iPhone. But whenever I receive a call from Viber, it would not ring. How do I fix this problem? How do I make it ring with incoming call?

Bring your phone into Apple for evaluation

Problem signing certificates from external token (smart card)

I can not sign PDF documents with an external token (smart card) through a card reader of a Cherry keyboard.
The card drivers perfectly detect the card and certificates in it, however when trying to sign a certificate in Adobe and select the location of the certificate click in the option "A device attached to this computer" ... I get an error indicating that no device is connected to the computer appears.
I have tried several different card readers, it seems a problem of drives because the middleware card recognizes all tested certificates readers, however it seems that Adobe is not able to find the card reader. It has happened with several teams. In one team made a clone and deploy it to another machine with the same hardware environment, the firm run properly in the pdf that clone, however on the original computer is not working.
You have any idea what could be the problem? Thank you very much in advance.

If the digital ID's corresponding public-key certificate is not getting added to either the Windows Certificate Store, or Mac Keychain Access when you plug the card into the card reader, then you need to load the PKCS#11 module via the Acrobat UI. The module will be a DLL on Windows or a bundle file on the Mac. The problem is there is no one file name to look for, you would need to consult the hardware's documentation to find the name of the file. Once you know the name you can add the P11 module from the Security Settings dialog and then Acrobat will then see the digital ID(s) loaded on the smart card.
Steve

The airport card on my macbook pro is not functioning. In the airport firmware folder it says that it opens with final cut express. Is this the problem and how do i solve it?

The airport card on my macbook pro is not functioning. In the airport firmware folder it says that it opens with final cut express. Is this the problem and how do i solve it?

Hopefully one of these steps should solve the problem.
1. System Preference > Sound > Output > Internal Speakers
    Highlight Internal Speakers
    Make sure that Mute is not enabled.
2. Remove the headphone.
    If you see red light in the headphone port, plug the headphone
    in and out of the port 5 or 6 times to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
3. Reset PRAM. http://support.apple.com/kb/PH4405
4. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
5. Applications > Utilities > Audio MIDI Setup
    Audio Devices window
    Side Bar
    Click the Built-in Output.
    Under Mute any of the boxes checked? If so, uncheck it.
6. System Preferences > Sound> Sound Effects
    Play sound effects through:
   Select "Internal speakers" and then back to "Selected sound output device".

My AppStore can not download app. He said need to fill in credit card. But I got no credit card. And how I fill in? Please solve the problem. Thank you.

My AppStore can not download app. He said need to fill in credit card. But I got no credit card. And how I fill in? Please solve the problem. Thank you.
<Email Edited by Host>

Hi Steve,
If you don't have a credit card for the billing information you may be able to use a gift card or another form of payment.
Please check out this article for details.
Why can’t I select None when I edit my Apple ID payment information? - Apple Support
Best,
Nubz

My iPhone 4S rings once and goes to voicemail after the os 7 update. Has anyone experienced this problem? How do I fix it?

I updated my fully functional IPhone 4S to OS7. Now when someone calls it rings once and goes to voicemail. Has anyone had this problem? How do I fix it? And yes I have restored my phone and reloaded it twice, still *****. It has turned into a Microsoft product.

Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...

How to deal with video card problem on Thinkpad E420

thinkpad E420 has GMA and a Special video card ATI READON HD 6630
I installed Archlinux and xf86-video-intel
then I go to the AMD offical web site and download video driver for linux64bit 11.8
after I installed it
I cannt login
and report me the gnome was crashed
can anybody help me with this problem?
how to make the two card work
or to disable my ATI card to cold down my laptop
thanks ^^

Maybe not out of the woods yet. I ordered a new video card and installed it today in slot 1 after removing the original one. When booting up I thought I was pressing the PRAM reset but had mistakenly held the "control" key down as well. Needless to say - no monitor start-up.
After restarting a couple of times to no avail I realized my mistake and the next time correctly held the CommandOption+PR keys but interestingly it took a couple of restart chimes before it correctly brought up a gray screen. I then didn't release the keys in time and the next restart chimes the monitor stayed black - after one or two more continuous restart chimes I got the gray screen and everything booted up OK. I no longer have an error message for PCI Cards at System Profiler.
But given that it seemed that the PRAM reset didn't consistently activate a signal to the monitor, I am a little anxious that I have been chasing the wrong problem - that maybe it's been a PRAM or other problem all along and not necessarily the monitor. I do have that case where the System Profiler gave me an error message for the PCI Cards selection under Hardware in System Profiler, but I'm left wondering if problem solved.
Any easy way to debug PRAM - where is PRAM data stored?
I will report back if I get another black screen on restart or wake up...

How can I use a PCMCIA RS-485 card from a LabView .exe?

Hi all,
We are going to be taking a LabView application and compiling it into an executable (.exe) for use by someone who does not have LabView. This program requires use of either a National Instruments PCMCIA RS-485 card or possibly a USB RS-485 card. The question is this - how do I use the card since we will not be able to run the MAXX software ahead of time to "install" the card?
Thanks,
Jason

Hi Jason,
On this deployment machine, you will need to have NI-Serial, NI-VISA, and the LabVIEW Run-time Engine. The version of the LabVIEW run-time engine will need to be the same version as the application was developed on. This can be downloaded from the Drivers and Update page or an installer can be created to install your application as well as the necessary run-time engine.
If your application has RS-485 communication, you will need to install both NI-Serial and NI-VISA on this deployment machine. NI-Serial is the driver for the NI PCMCIA-485 or NI USB-485. The NI-Serial driver allows the devices to be properly configured and recognized in Windows. NI-VISA gives you the programming capability in LabVIEW. You can add both the VISA run-time engine and NI-Serial to your installer. You will need both of these drivers with the NI Serial hardware.
You will have to run through the "Found New Hardware" Wizard when you install the hardware initially on this deployment computer, but setting up the baud rates and communication configuration should be done in your application as normal.
I hope this helps!
Regards,
Missy S.
Calibration Engineer
National Instruments

How can I communicate with my PCMCIA-CAN/2 card using Java?

I need to write a Java program to send messages via CAN. The program I used with the Win NT driver of the PCMCIA-CAN/2 card worked. But I have to use Win 2000 now and the new driver nican V 1.6 doesn't work (can't send messages via CAN from my Java program). Thanks in anticipation.

Do you get any error code/message back? Sounds like the Java wrappers that you made for the C dll's need to be recompiled? If the application runs in a weird way using the bus monitor.exe (\NI-CAN) would help.

Routers Vs 3745 token-Ring

I am a beginner on technology Cisco, here my problem. Today I have 2 3745 with a different address Token Ring, I replace this old technology by a router Cisco 72XX and a card CPA, I hope that you include/understand me. Now, I use card CPA. How to make to keep the same SAP addresses on the 2 addresses Token Ring of the 3745, while using on the Cisco the function "lan Token Ring". Which are the commands to be activated on the router to describe this function

Hi Francis, The quick answer is that the SAPs are defined and activated in "XCA" nodes on the mainframe. You may want to have a look at -
http://www.cisco.com/en/US/partner/tech/tk331/tk332/technologies_tech_note09186a0080094248.shtml
to walk you through the process.
Rgds, Dan

Pcmcia token ring card problems or how to compile a module?

Similar Messages

Maybe you are looking for