PCtr assignment to specific GL accounts

Hi all of you
My client is asking to restrict the GL account postings from other PCtrs pertains to one Profit center. For example, one House bank is used in one profit center only, no way related with another PCtr and Cash journal also.
How to fulfill my client's requirement ?
Is there any provision to give PCtr assignment to the GL/CJ/HB master data ?
Please advice me regarding.
Thanks
Ramki

Thanks for your valuable reply Babu.
I had tried several times in FAGL3KEH. In that, if you give one PCtr to the GL accounts, then no need to give the PCtr at transaction level. It works like Default assignment with out any restriction to the other PCtrs.
I want to give PCtr assignment which not allows to post with other PCtrs.
Please try to make resolve my issue
Thanks & Regards
Ramki

Similar Messages

New-GL-how to assign the zero balance accounts to scenarios

Dear Experts
Please help me how/where to assign the zero balance accounts to scenarios.
Standard functionality supports: Profit Center derication as mentioned below:
Derivation based on master data--If the line item contains a cost object, the profit center in the master data of the cost object is used.
Derivation based on product category
Derivation based on organizational structure
Derivation based on document splitting - For line items in the Accounts Payable, Accounts Receivable, Cash, and Taxes sub-ledgers, a profit center is only derived if you are using profit center segment accounting with clearing or with balancing. For journal entries, document splitting is always performed for the line items in these sub-ledgers after the other line items have been created.we are concerned abt the 1st scenario & 4
Default profit center-FAGL3KEH -If no profit center could be determined based on the product category, organizational structure, or document splitting, the standard profit center we specified when configuring the corresponding ledger is used.
But I am looking for a specific requirement to configure the Zero balance clearing account to the scenarios.
Thanks
Rama

That information will not be any use.
You can carry forward any number of times - the last should be after closing of previous years accounts.
Hope it is clear.

Assign a G/L Account to a Segment for Document Splitting

HI Experts,
Do you know if it is possible to assign a G/L Account to a specific segment?. I know and have setup the splitting method and rules, we have created item categories and base categories and splitting method. Document split is active and working fine. We have defined all different segments (MXC000, MXC0001, etc) in the Enterprise Structure section of IMG. On the other hand, I have an account for automatic postings 7300001 for the exchange rate differences when documents are posted in foreign currency.
Question is, is it possible to assign account 7300001 to a specific segment MXC0000 for example?. Since the postings to the 7300001 are automatic postings, is there a place in the system where I can assign my segment MXC0000 to account 7300001, thus automatic postings hit segment MXC0000 as well?
Reward points for helpful answers, Thank you.

Use Tcode FAGL3KEH and assign a default profit center such as XXXX .
In Profit center master data you assign "MXC0000" as segment.
System derives in this case the segment via Priofitcenter assigned in FAGL3KEH.
This is one way of doing.
Revisit the classification of GL accounts for document splitting and check whether the assignment to the GL account is "40200 - Exchange rate diff account "or not
reward points if useful
sarma

Breakdown of costs into specific GL Accounts on Sales Order

So, here's what I understand from the client. They have the cost of production from Raw Materials to Finished Goods and will be setting up in the system on the production side by the breakdown of all costs. The question is, when a sale is made, can we post some or all of these specific costs into respective GL accounts? I am not still very clear on the requirement as such, but it was drafted by someone prior to me. I am just preparing to understand this scenario in terms of how we can do this in the system. Any help is appreciated. Thanks in advance!

Hi
When we make sales we can charge cost of goods sold to relevant GL by making account determination assignment in OBYC and accounting entry takes place at the time of PGI. We can charge material's cost price in one G/L here. If your query to break this cost in different GLs and post, then I must say that this is not possible. System only posts materials cost price which comes from material master data.
Understand your client's query in detail and see if this is what they are seeking for.
Thank$

Report as per Customer Account Assignment group or Material Account Assig

Hi,
I require report as per customer account assignment group or material account assignment group.
Can you please tell me how to fullfill this requiremetn.
I have go for ZReport or any standard report is available.
Regards,
ch.srinivas

Hi,
You could have gone for a query but unfortunately,you cannot use table TSTMT in a query so I think ZREPORT would be a better option.
Regards
Karan

My question is in regard to pc to mac migration. How do I migrate information from my pc with specific user account to an existing user account on my mac? I do not want to use multiple mac user accounts.

My question is in regard to pc to mac migration. How do I migrate information from my pc with specific user account to an existing user account on my mac? I do not want to use multiple mac user accounts.

https://discussions.apple.com/message/16371308#16371308

My printer (LaserJet CP1525na) was assigned to an old account. Can it be reset to a new one?

I have a LaserJet CP1525nw that was previously assigned to a different account for eprint. That information is lost to me now. How can I get the printer to be recognized by a new account so that I can continue to use the eprint feature?

Hello Mark0154,
That's fine if the printer was assigned to another account then the only thing that you will have to do is setup ePrint again. I am linking you to a video that walks you through process of setting up ePrint. I would skip to the 3:40 mark in the video. If ePrint is already enable on your printer disable it and then go back in and reenable ePrint this will make your printer print a new printer code so you can setup a new custom ePrint email address.
Let me know how it goes.

How do I turn off all alerts for a specific email account

I want to disable all notifications for a specific email account and I can't find the options to do this. So basically I have 3 email accounts linked on my blackberry. I and I want to make it so that any time account #3 gets an email I don't get a red flashing light or a new message * anywhere. I case you're wondering I've funneled all those annoying promo adds to this one account. It's just that sometimes some of them actually have good deals so I want to be able to check them every now and then but it's seriously annoying when my red light is going off constantly. NEVER MIND! I found it, but I'm going to leave this here incase anyone else it looking for something like this. You go into notification profiles and change the settings for that profile. So it's : Notifications -> Profiles -> Normal (or which ever one you want) -> Customize App Notifications -> Email Messages -> Select email account you want -> Turn off all notifications or modify them to your preference. It does suck that you can't just globally set it by email account. It seems you have to go through each profile and change the settings one at a time. Most people probably only have 3 though so it's not that big a deal #firstworldproblems. DOUBLE NEVER MIND! So the "solution" I mentioned above only seems to work for the LED indicator and the instant popup you that comes on the top of the screen when you get a new notification. I'm still getting the red "new email" star on the side bar when I do a quick look from the homescreen or an app. And the 3rd email account has a "new email" red star next to it as well. Hoping someone out there knows how to turn them off for a specific email account. Thanks. - Kbye

Hi, I am using German OS therefore maybe the items are called differently in English: 1) Go into the main menu 2) Select "Alerts" 3) select the Profile you like to adjust 4) Select App Alerts 5) Select Email 6) You sould see your 3 mail accounts listed 7) Select the one you like to "mute" and you can set everything (sound, LED, vibration etc. individually for this acount) Hope it helps Alex

HT4207 how can I remove a specific gmail account from my ipad 4?

How can I remove a specific Gmail account from my ipad 4?

Assuming you are not syncing with iCloud and you mean, syncing with iTunes only...(you can only use one or the other for syncing to prevent duplicates)
iTunes -
- Open iTunes on your Mac. Connect your iPad. Then click on your iPad (either its name or just "iPad"), then click the info tab (right above the photo of an iPad in the middle). From here you can select sync contacts, then sync groups, and select the groups you want and choose Apply/Sync in the bottom left corner.
iCloud -
- With iCloud if you just sign into iCloud in System Preferences and turn on Contacts, it will prompt to merge all of your contacts that are not already syncing with Gmail or Yahoo!, etc. so there really isnt a way to pick and choose as much with that.
- However if you really want to use iCloud and not iTunes, you could import the contacts that you want into iCloud.com, but you would need to export them from your Contacts App on your Mac and then import them into iCloud (VCard / .VCF is the format you want).
* Exporting the contacts from your Mac Contacts Application --> http://mac.tutsplus.com/tutorials/app-training/contacts-101-a-beginners-guide-to -contacts-on-os-x/ (further down the page)
*Importing contacts into iCloud.com - http://support.apple.com/kb/PH3605
**NOTE - Remember if you do the import into iCloud.com method, DO NOT sign into System Preferences > iCloud, and choose to MERGE contacts. If you do this later, all of your contacts will merge with iCloud and you will have duplicates of this group.
I hope this isnt too confusing. Have a good night!

How to assign project specific task with the newly created projects ?

Hi All,
I need help. I need to assign project specific tasks (which i will be taking from staging table) other than the default task which are assigned during project creation. How do I proceed with this within same package. I am attaching the code of my package below...
CREATE OR REPLACE PACKAGE body xxpa_proj_conv_pkg as
PROCEDURE xxpa_create_project_proc(O_ERRBUF OUT VARCHAR2,O_RETCODE OUT VARCHAR2)
is
variables need to derive global parameters
v_responsibility_id NUMBER; --- PA Supervisor responsibility id
v_user_id NUMBER;
deriving global parameters-
-- Variables needed for API standard parameters
v_api_version_number NUMBER := 1.0;
v_commit VARCHAR2(1) := 'F';
v_return_status VARCHAR2(1);
v_init_msg_list VARCHAR2(1) := 'F';
v_msg_count NUMBER;
v_msg_index_out NUMBER;
v_msg_data VARCHAR2(2000);
v_data VARCHAR2(2000);
v_workflow_started VARCHAR2(1) := 'Y';
v_pm_product_code VARCHAR2(10);
---variables for catching errors---
v_error_flag number:=0;
-- Predefined Composite data types
v_project_in PA_PROJECT_PUB.PROJECT_IN_REC_TYPE;
v_project_out PA_PROJECT_PUB.PROJECT_OUT_REC_TYPE;
v_key_members PA_PROJECT_PUB.PROJECT_ROLE_TBL_TYPE;
v_class_categories PA_PROJECT_PUB.CLASS_CATEGORY_TBL_TYPE;
v_tasks_in_rec PA_PROJECT_PUB.TASK_IN_REC_TYPE;
v_tasks_in PA_PROJECT_PUB.TASK_IN_TBL_TYPE;
v_tasks_out_rec PA_PROJECT_PUB.TASK_OUT_REC_TYPE;
v_tasks_out PA_PROJECT_PUB.TASK_OUT_TBL_TYPE;
v_CREATED_FROM_PROJECT_ID varchar2(20);
v_CARRYING_OUT_ORGANIZATION_ID varchar2(20);
v_person_id NUMBER;
v_project_role_type VARCHAR2(20);
API_ERROR EXCEPTION;
v_a NUMBER;
cursor for project in data
CURSOR cur_project_in_data IS SELECT * FROM XXPA_PROJECT_IN_STG;
cursor for task data
CURSOR cur_task_in_data IS SELECT * FROM XXPA_TASK_IN_STG;
------------------------Cursors used for validations----------------------------------
cursor for product code used for validation
cursor cprc is select distinct PROJECT_RELATIONSHIP_CODE from PA_PROJECT_CUSTOMERS;
cursor for distribution rule-
cursor cdr is select DISTRIBUTION_RULE from PA_DISTRIBUTION_RULES;
cursor for project status code
cursor cpsc is SELECT PROJECT_STATUS_CODE, PROJECT_STATUS_NAME FROM PA_PROJECT_STATUSES WHERE STATUS_TYPE = 'PROJECT';
cursor for template/created from project id
cursor ccpid is select project_id from pa_projects where template_flag='Y';
BEGIN
select user_id, responsibility_id into v_user_id, v_responsibility_id
from PA_USER_RESP_V
where user_name like 'amit_kumar%'
and responsibility_name like'PA SupervisorS';
-- --Fnd_global.apps_initialize(user_id,resp_id, resp_appl_id);
-- Fnd_global.apps_initialize(v_user_id,v_responsibility_id,275);
-- -------calling global parameters---
pa_interface_utils_pub.set_global_info
p_api_version_number =>v_api_version_number,
p_responsibility_id =>v_responsibility_id,
p_user_id =>v_user_id,
p_msg_count =>v_msg_count,
p_msg_data =>v_msg_data,
p_return_status =>v_return_status
dbms_output.put_line ('Set Global status ->' || v_return_status);
----Cursor for PRODUCT RELATED DATA-----------
FOR REC IN cur_project_in_data LOOP
-----PASSING VALUES TO THE COMPOSITE DATA TYPE(PROJECT_IN_REC_TYPE)-------
----retrieving product code-----
select lookup_code into v_pm_product_code
from pa_lookups
where lookup_type = 'PM_PRODUCT_CODE'
and meaning = 'Oracle Project Manufacturing';
-----retrieving and validating created from project id----
BEGIN
select project_id
into v_CREATED_FROM_PROJECT_ID
from pa_projects_all
where name=rec.created_from_project_name;
EXCEPTION
when others then
O_Retcode := '1';
O_Errbuf :='Incorrent CREATED_FROM_PROJECT_NAME';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET ERROR_FLAG ='1' ,last_updation_date='sysdate' where created_from_project_name = rec.CREATED_FROM_PROJECT_NAME;
END;
-----retrieving & validating carrying out organization id-----
BEGIN
select distinct(CARRYING_OUT_ORGANIZATION_ID)
into v_CARRYING_OUT_ORGANIZATION_ID
from pa_projects_prm_v
where CARRYING_OUT_ORGANIZATION_NAME=rec.carrying_out_organization_name;
EXCEPTION
when others then
O_Retcode := '1';
O_Errbuf :='Incorrent Carrying Out Organization name';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET ERROR_FLAG ='1' ,last_updation_date='sysdate' where carrying_out_organization_name = rec.carrying_out_organization_name;
END ;
v_project_in.pm_project_reference := rec.segment1;
v_project_in.project_name := rec.PROJECT_NAME;
v_project_in.created_from_project_id := v_CREATED_FROM_PROJECT_ID;
v_project_in.carrying_out_organization_id := v_CARRYING_OUT_ORGANIZATION_ID;
v_project_in.project_status_code := rec.PROJECT_STATUS_CODE;
v_project_in.description := rec.PROJECT_DESCRIPTION;
v_project_in.start_date := rec.PROJECT_START_DATE;
v_project_in.completion_date := rec.PROJECT_COMPLETION_DATE;
v_project_in.distribution_rule := rec.DISTRIBUTION_RULE;
v_project_in.project_relationship_code := rec.PROJECT_RELATIONSHIP_CODE;
-------------------------Validation of incoming project data--------------------------------
v_error_flag := 1;
project relationship code validation
BEGIN
for prc in cprc
loop
if (rec.PROJECT_RELATIONSHIP_CODE=prc.PROJECT_RELATIONSHIP_CODE) or (rec.PROJECT_RELATIONSHIP_CODE is null)--can be overridden from template
then
v_error_flag :=0;
else null;
end if;
end loop;
END;
project distribution rule validation
BEGIN
for dr in cdr
loop
if (rec.DISTRIBUTION_RULE=dr.DISTRIBUTION_RULE) or (rec.DISTRIBUTION_RULE is null) null since the value can be taken from template too
then
v_error_flag :=0;
else null;
end if;
end loop;
END;
project status code validation
BEGIN
for sc in cpsc
loop
if (rec.PROJECT_STATUS_CODE=sc.PROJECT_STATUS_CODE) or (rec.PROJECT_STATUS_CODE is null) null since the value can be taken from template too
then
v_error_flag :=0;
else null;
end if;
end loop;
END;
dbms_output.put_line ('Error at PROJECT_STATUS_CODE>' ||v_error_flag);
validation logic for project start date
BEGIN
if TRUNC(rec.PROJECT_START_DATE) >= TRUNC(rec.PROJECT_COMPLETION_DATE)
THEN
v_error_flag := 1;
O_Retcode := '1';
O_Errbuf :='Project start date cannnot be greater than completion date';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
END IF;
END;
validation logic for project completion date
BEGIN
if (TRUNC(rec.PROJECT_COMPLETION_DATE)<=TRUNC(rec.PROJECT_START_DATE))
then
if ( rec.PROJECT_STATUS_CODE='CLOSED' and rec.PROJECT_COMPLETION_DATE>sysdate)
THEN
v_error_flag := 1;
O_Retcode := '1';
O_Errbuf :='completion date cannot be greater than sysdate for closed projects';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
END IF;
v_error_flag := 1;
O_Retcode := '1';
O_Errbuf :='Project closed date cannot be less than start date';
end if;
END;
--------Update staging table for the error records--------
BEGIN
if v_error_flag =1
then
O_Retcode := '1';
O_Errbuf :='Incorrect project relationship code';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET ERROR_FLAG ='1' ,last_updation_date='sysdate' where PROJECT_RELATIONSHIP_CODE = rec.PROJECT_RELATIONSHIP_CODE;
end if;
END;
-----------------------End of validation of incoming project data----------------------------------
---------------Project Task DATA-----------------
v_a:=0;
FOR tsk IN cur_task_in_data LOOP
v_tasks_in_rec.pm_task_reference :=tsk.task_reference ;
v_tasks_in_rec.task_name :=tsk.task_name;
v_tasks_in_rec.pm_parent_task_reference :=tsk.parent_task_reference ;
v_tasks_in_rec.task_start_date :=tsk.task_start_date ;
v_tasks_in_rec.task_completion_date :=tsk.task_completion_date ;
v_tasks_in(v_a) := v_tasks_in_rec;
v_a:=v_a+1;
end loop;
---------------end of task details------------------
--INIT_CREATE_PROJECT
pa_project_pub.init_project;
---------------------CREATE_PROJECT--------------------------
pa_project_pub.create_project(
p_api_version_number=> v_api_version_number,
p_commit => v_commit,
p_init_msg_list => v_init_msg_list,
p_msg_count => v_msg_count,
p_msg_data => v_msg_data,
p_return_status => v_return_status,
p_workflow_started => v_workflow_started,
p_pm_product_code => v_pm_product_code,
p_project_in => v_project_in,
p_project_out => v_project_out,
p_key_members => v_key_members,
p_class_categories => v_class_categories,
p_tasks_in => v_tasks_in,
p_tasks_out => v_tasks_out);
if v_return_status = 'S'
then
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET INTERFACE_STATUS ='Success' where segment1 = v_project_out.pa_project_number; ---P->pending & S-> Success
dbms_output.put_line('New Project Id: ' || v_project_out.pa_project_id);
dbms_output.put_line('New Project Number: ' || v_project_out.pa_project_number);
else
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET INTERFACE_STATUS ='Pending' where segment1 = v_project_out.pa_project_number;
raise API_ERROR;
end if;
END LOOP;
Commit;
------Handling Exception--------
EXCEPTION
WHEN api_error THEN
dbms_output.put_line('An error occured during project creation');
IF (v_msg_count > 0 ) THEN
FOR i IN 1..v_msg_count LOOP
apps.PA_INTERFACE_UTILS_PUB.get_messages(
p_msg_count => v_msg_count,
p_encoded => 'F',
p_msg_index => i,
p_msg_data => v_msg_data,
p_data => v_data,
p_msg_index_out => v_msg_index_out);
dbms_output.put_line('Error message v_data ->'||v_data);
dbms_output.put_line('Error message v_msg_data ->'||v_msg_data);
dbms_output.put_line('Error message v_msg_index_out ->'||v_msg_index_out);
dbms_output.put_line('Error message p_msg_index ->'||i);
APPS.fnd_file.put_line(APPS.FND_FILE.LOG,v_data);
END LOOP;
END IF;
WHEN OTHERS THEN
dbms_output.put_line('An error occured during conversion, SQLCODE ->'|| SQLERRM);
IF (v_msg_count >=1 ) THEN
FOR i IN 1..v_msg_count LOOP
PA_INTERFACE_UTILS_PUB.get_messages(
p_msg_count => v_msg_count,
p_msg_index => i,
p_encoded => 'F',
p_msg_data => v_msg_data,
p_data => v_data,
p_msg_index_out => v_msg_index_out);
dbms_output.put_line('Error message ->'||v_data);
APPS.fnd_file.put_line(APPS.FND_FILE.LOG,v_data);
END LOOP;
END IF;
end; --end procedure
END xxpa_proj_conv_pkg;
* Please tell me how to assign project specific task with the newly created projects??? *
Also please tell me how to assign multiple * Project_Relationship_Code * (ex: END CLIENT, GENERAL CONTRACTOR, PRIMARY) for a particular project during project creation?

Are you not storing the project number in the staging table designed for storing the task data? You can use create_project API to create the project and tasks at the same time with one single call. You may want to try that option

Assigning of g/l account for user defined field

IN the sales invoice i am creating the user difined field
for manual tax( i.e manual tax the customer how much tax amount he will give that much amount he will feed in that field )in the row level and i want to assign the g/l account for that user defined field
please explian what is the procedure
Edited by: Philip Eller on May 23, 2008 10:11 AM

Hi,
Do you want the G/L account input automatically or manually ? if manually try to use this query FMS:
SELECT T0.[AcctCode], T0.[AcctName] FROM OACT T0
In the UDF, just press shift+F2 and select the account code you want to input.
Rgds,

How to populate Assignment field in gl account

Hello SAP Guru,
I am doing EBS BRS.
In Tcode FF68 to generate pay in slip. In this Tcode I am putting 009 in group field.
When I am posting the check then bank clearing account in refrence no. this group field 009 appears. But I want it to be in Assignment field of bank clearing account.I want to use it for auto clearing. by matching Assignment field from bank statment and assignment field from bank account i.e clearing accuont.
Thanks
Raj

Hi Rajeev,
Assign the correct sort key to the GL Account in the master data so that it populates the data to ASSIGNMENT (ZUONR) field.
Do let me know if it works.
If there is no sort code defined assigns a value to assignment field then create a new one -- in the Implementation Guide (IMG) under Determine Standard Sorting for Line Items.
Regards,
Binay Agarwal

Cost element assigned to which GL account

i wanted to find out cost element XXXXXX assigned in which CC & Cost element XXXXXX assigned to which GL accounts.
can you please suggest the table name to check the cost element data assigned to which Company codes & which GL accounts.
Moderator: help.sap.com. Please, avoid asking basic questions

Hi,
Can please somebody answer my question
Regards
Harish

Can not assign a g/l account in freight costing VI02 - 4.5B environment

I am trying to assign a g/l account to a my freight cost (VI02) and I am unable to do so. I have tried creating a new g/l account using FS01 and it doesn't show up as an option to choose from. I am sure it takes more than just creating a g/l account to make this happen. Could someone provide the steps needed to set this up?

Go to Logistics Execution > Transportation > Shipment Costs > Shipment Cost Document > Shipment Cost Types and Item Categories.
There select your Shipment Cost Type and double click on Assign shipment cost types and item categories. Check what Valuation Class is maintained.
Now go to OBYC, double click on GBB and check what G/L Account is assigned to that valuation class.
thanks
G. Lakshmipathi

Profit center is not auto assigned to B/S account

Hi all,
I actived document splitting function. When I post in FB50, Profit center is assigned to P/L account by me but it is not automatic assigned to B/S account. Follow our solution, I want the system auto enter same Profit center for P/L and B/S account.
How to the system auto fill Profit center which was assigned to P/L account by me for B/S account?
Thanks a lot

hi
Is the profit center field checked as mandatory in document splitting characterstics for general ledgers, and please check once the general ledger view
krishna
Edited by: achantakrishna on Sep 9, 2011 12:03 PM

PCtr assignment to specific GL accounts

Similar Messages

Maybe you are looking for