PCUI and CIC web client differece?or same?

crm sale module in pcui and sales module in cic web client are same or different..technical and configuration differences
can anyone help me out in this..
thank you,
hun

Hi raj,
thank you for the information.
is there any relation between pcui and other web based applications like internet sales(b2b,b2c e-sales,e-service,e-marketing,,icss) and cic(for call center users) and sap portal(channel partners/b2b-one of the application).
is there any difference between launching crm_ic directly than from launching it from crm_ic. do i do the setting for cic webclient settings in spro or se80. i think bsp applications for cic webclient are done from se80 and the configuration for cic webclient.please tell me if it is not right.
where we will generate the url for this cic webclient and internet sales so that the users can use that url and login from anywehre in the world through internet browser.
thank you,
hun

Similar Messages

ASA 5505 as a SSL VPN Server and Easy VPN Client at the same time?

Is it possible to configure and operate the ASA 5505 as a SSL VPN server and Easy VPN Client at the same time? We would like to configure a few of these without having to purchase additional ASA 5505 and use a 2 device method (1 SSL VPN Server and 1 Easy VPN Client). Thanks in advance.

I don't think it is possible. Following links may help you
http://www.cisco.com/en/US/products/ps6120/products_configuration_guide_chapter09186a008068dabe.html
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008071c428.shtml

I am trying to install my HP desk jet 3050 and it only supports mac 10.6 and hp web site has the same software is there any way to install it in mac 10.6 mode

i am trying to install my HP desk jet 3050 and it only supports mac 10.6 and hp web site has the same software is there any way to install it in mac 10.6 mode it works with lion but i need the software on my mac

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01664444&cc=us&lc=en&dlc=en #N43
Seems your printer is supported in Lion.

Adding new search fields in identifying accont in CIC Web client

Hi All,
How do I do to add a new field (not in BOL) to search for in the identiyng account in CRM 4.0 Interaction Center Web client.
We have extended the BOL with the new field and add it to the BSP for BupaSearchB2B, But what and where do I add functionality to also actually use the field content when searching for business partners.

Hi jan
I am facing the same problem we are adding one field to identify account in CRM 4.0 IC WEBCLIENT , field name is CIF NUMBER (bu_sort1 or bpext) , I identified that it is not an standard BOL field , can you please update me how you added the new field to bol structure and what is the follow up process to provide complete functionality like the existing fields , Please extend your help regarding this field addition , it is very urgent
this is my mail id [email protected]
Warm regards
bms

Reg CIC WEB Client

Hi to every budy,
I am new to CRM. I want to learn CRM IC Web Client i am having CRM IDES. For doing the CRM IC Web client what r the softwares we requred and can any one have deatalied steps regarding installation of IC Web client. pls tell process for this.
Thanks in Advance.
Regards,
Sanajana

Hi Sanjana ,
If it is 5.0
you will need to do/have the following
1.Java (TM) 2 platform ( minimum req is 1.4.2)
2.ccsui.jsp for simulating the calls in CIC
3.crm_cfs logon for fact sheet
4.crm_ic_ise for script editor.
there is a range of settings/profiles to be made for ICW cheers!
Shankar Raj
Message was edited by:
shankar raj

CIC-WEB CLIENT & WIN CLIENT

Hi,
Please tell me the
1.Difference between WEB CLIENT & WIN CLIENT
2.What are the advanatges/drawbacks of each.
3.If we have to implement what is the Prerequiste for both.
Regards,
Natasha P

Hi,
CIC win clent and web client are there upto 5.0.
Now WIn client is obsolete, only webclient is there.
Differences: Win client wil work with in the network only. Web client will work if you have a internet fecility.
The Interaction Center (IC) WinClient is a SAP GUI-based agent desktop interface for interaction center agents that provides a framework for processing IC WinClient functions. It can be used for any business transactions via phone, e-mail, chat, paging, Web call back, or voice-over Internet Protocol (VoIP).
Web client will be webased user can open any where and do the transactions.
Now in crm2007 there is no win client, only WEB CHANNEL is there.
This area of SAP Customer Relationship Management (SAP CRM) enables you to turn the Internet into a profitable sales and interaction channel for both business partners and consumers by providing your customers with a personalized Web experience and convenient self-services. The CRM Web Channel applications cover Web-based sales and service transactions, targeted marketing, and analytics for system and customer behavior.
Through BSP application we will develop the web channel. In new version there are many customization in webchannel.
Regards
Srinu

Portal and IC Web client Transaction Launcher conflict

We have integrated IC Web Client within Enterprise Portal by creating iview that launches IC Web client in a new browser window
Additionally, within IC Web client we have configured the Navigation Bar using the transaction launcher launch to various Non BSP URLs (e.g. www.ups.com) in a new browser window (stateful checkbox).
The problem weu2019re experiencing is if an agent launches a new browser window by selecting a URL from the Navigation Bar and then closes this browser window manually they are getting a prompt to save their work. This behavior only occurs when we start IC Webclient from the portal. When we use IC Webclient outside of portal the problem does not occur.
How to remove that SAVE popup?
Any help would be greatly appreciated.
Thanks
Muthappan

We have integrated IC Web Client within Enterprise Portal by creating iview that launches IC Web client in a new browser window
Additionally, within IC Web client we have configured the Navigation Bar using the transaction launcher launch to various Non BSP URLs (e.g. www.ups.com) in a new browser window (stateful checkbox).
The problem weu2019re experiencing is if an agent launches a new browser window by selecting a URL from the Navigation Bar and then closes this browser window manually they are getting a prompt to save their work. This behavior only occurs when we start IC Webclient from the portal. When we use IC Webclient outside of portal the problem does not occur.
How to remove that SAVE popup?
Any help would be greatly appreciated.
Thanks
Muthappan

Spring Tools Suite and vSphere Web Client plugins

Hi, I am new to this environment. I am developing VMware vSphere Web Client plugins. In the setup for vSphere Web Client plugins, it is indicated that the preferred tools include Spring Tools Suite, which is a derivative of Eclipse. It is an optional component to use the FlashBuilder tool. Optionally, the VMware documentation indicates that you can use Eclipse instead of the Spring Tools Suite, but different setup is needed.
I am posting here (instead of VMware/STS) for the following reasons. I am able to set up the environment without the FlashBuilder tool. I am able to develop Web Client plugins without the FlashBuilder tool. However, I believe the FlashBuilder tool will make development easier. When I try to get the FlashBuilder to load, I no longer can get things to work; I cannot develop Web Client plugins. Lastly, the FlashBuilder tool is the only piece of the puzzle that is a licensed product, and therefore, I will not be able to purchase the product if I cannot get the trial version to work.
FlashBuilder has a plugin installer for Eclipse. I have tried to install the plugin to Spring Tools Suite, and I have tried to install the plugin to a regular version of Eclipse. In either case, the problem I run into is that I cannot locate the VMware files, and doesn't have the virgo service which is present when I did not have the FlashBuilder plugin installed.
Does anyone have any experience or familiarity in getting FlashBuilder to work in this type of setup? Clearly it is doable, but using all of the documentation that I can find online, I cannot get FlashBuilder to work in my environment.
Thank you for any help or suggestions you might have.

Oh sorry, I thought that I had. I had gone to "contact adobe" and clicked on "customer service". It then told me to "select a product", to which I chose "Flash Builder". I then had to tell it that the question was in regard to "downloading, installing, setup" (of said Flash Builder). From there it told me I can ask the community or call a representative... when I clicked "community" I thought the initial "Flash Builder" setting that I chose would apply to where the question got posted, but it seems it did not.

Performance Monitoring and the Web Client

I am a project manager managing a large infrastructure upgrade with a migration of existing VMs.
I want to understand how my current VM are performing and the tool I have is the vSphere Web Client 5.1.
I want to get more trending data on disk I/O and Network use.....I cannot get this data with this tool.
I do not have access to the host to run the command line tools. What can I do? I also do not want to buy VCOPs either.

Hello dfery123,
Have you tried Monitoring Inventory Objects with Performance Charts (vSphere 5.5 Documentation Center - Monitoring Inventory Objects with Performance Charts)?
Regards,
Todor

IIS and IC Web Client

Hi,
I'm having a problem with my IC Web Client. After I install IIS (because I need to install TREX), I launch IC Web Client, it shows Page cannot be displayed. I uninstall IIS, my IC Web Client works fine. Anything that I've left out?
Appreciate any help.
Hapizorr Rozi Alias

Problem solved.

Development and Quality Assurance clients on the same instance

Hello,
Is possible to work in parallel with two clients: one for Development and the other for Quality Assurance on one SAP Solution Manager instance: SID?
Regards,
Lui Peng

Hi
It is possible and you can have DEV and QA on same server
We have at one location 2 server solman landscape in which we have DEV(100) and QA(200) on 1st server and PRD(100) on another server.
Hope it clarifies your doubt
Regards
Prakhar
Edited by: Prakhar Saxena on Nov 5, 2009 11:20 AM

Reg: Closing and Opening Web Dynpro Application in same browser

Dear Experts
In my webdynpro application when i click a button another web dynpro application is opened in another window(another browser) .
But i want to open the second web dynpro application inside the same browser in which closing the first applicaiton and opening the second web application in same browser window .
Please guide me to do this.
Regards
Arun

hi ,
Exit plugs have the special property that they use the defined URL parameter. After you have created the URL parameter in the parameter list on the Outbound Plugs tab page in the window editor, you can specify a value for this parameter in the method that calls the exit plug.
ref
link:[http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/ca3351508f04e7e10000000a42189c/content.htm]
it would help u
regards,
amit

Can I use my New Imac as a server and a workstation/client at the same time ?

I havea brand new (2 months Old) Imac - 4 Gig, fully loaded and want to use it as a server using lion server app. I want to use it for ical server, Addressbook and fileshareing with a bit more security. I dont want to buy a new computer, just use the existing one to do these services. At the same time, I want to still use this computer for my regular work.
There will be a few users with low traffic. At the beggining, there will be only 1 other user for the calander, addressbook and file server. Later it might grow to 4.
Any thoughts would be appreciated !!!
PS - Any advice on how to set this up or tricks would be appreciated
Thanks Again

Arik From Tel Aviv wrote:
great Idea !! Lets assume I dont want to go virtual - what is your thought on that ?
Lion Server is a "layer" on top of client. The services run in the background and do consume resources like the RAM, CPU, and HD, while you're using the computer as a client. That said, when running a VM with say VMWare Fusion you dedicate Cores and RAM to VM, even if the VM doesn't need all the CPU horsepower or RAM for your server tasks. So it may be that running a full blown Lion Server as VM along side client is more resource intensive on your computer than just running Lion Server while also using it as a workstation.

Oracle AS and Oracle 9i Client on the same server

Hello,
We have a Window 2000 server with Oracle 9i Client. A number of applications running on this server relies on Oracle 9i Client. Could I install Oracle AS on the same machine without causing any problems to the applications using Oracle 9i client?
Thanks
Slava

Oracle software is multi home aware - which means you can install 10 different Oracle products and versions, each in its own unique Oracle Home directory, and switch between and run all 10 different products - even at the same time (assuming sufficient resources on the platform).
You cannot "+consolidate+" different Oracle Homes - it is an unwise thing to do. The Oracle Universal Installer (OUI) has the means to determine when installing a new product, whether or not you have the option to install into an existing Oracle Home.
And with OUI you also have the means to uninstall products in which case you can remove the corresponding Oracle Home from your platform.
Note though that despite multiple homes, certain configuration files will be shared (e.g. +/etc/oratab+ on Unix systems). In such a case you may need to manually update such a configuration file after removing an Oracle Home from your system.
Oracle XE sports its own installer (setup.exe on Windows) - so it does not use OUI. But it is multi-home aware - and can co-exists with other Oracle products in their specific Oracle Homes.

Components Required for CIC Web Client

We have a question about CIC installation components for CRM 5.
When we check the "Upgrade Master Guide" for "mySAP Customer
Relationship Management" ( Pages 58 - 61 ) for all CIC components, we
do not find that JAVA components are required for CIC ( Like JCRM).
When we see details from Best Practices Doucment for CRM component matrix, we see that its required.
We are not sure what to do. We were under the impression that Java
components are not mandatory for CIC forCRM 5. All we need is TREX and IPC.
Can someone please clarify/confirm ASAP as system needs to be build
accordingly. If we do need JCRM, what functionalities is this required for?
Thanks for help in advance.

Hi Nikhil,
With 04s all required installations will be completed by default. Just that you have create a domain and the track to make use Webdynpro Components in NWDI.
Following are the SCs that are required.
DI Build Tool 7.00
SAP J2EE Engine 7.00
SAP Java Tech Services 7.00
This u can download from Service Market Place
Support Packages and Patches - SAP NetWeaver - SAP NETWEAVER - SAP NETWEAVER 7.0 (2004S) - Entry by Component - Development Infrastructure
Regards,
Nagarajan.

PCUI and CIC web client differece?or same?

Similar Messages

Maybe you are looking for