PDA LabView development per User's manual.

Develop PDA software as defined in the attached User's manual under Windows Mobile 5.0. Hourly compensation, possible off-site work. Thanks for looking.
Attachments:
DNTUSER2.pdf ‏790 KB
DNTUSER3.pdf ‏790 KB

Hello,
Here is an example of a LabVIEW project I did last year
http://www.inventeering.com/MassArray_NanodispenserRS1000(screen_samples).gif
Here is an example of a LabVIEW project I am currently working on.
http://www.inventeering.com/OLED/OLED_Demo1.wmv
I would like to introduce myself and offer my engineering consulting services. My name is George Miles and I am Electrical Engineer and the owner of a small Engineering Consulting Firm. I have over 25 years of engineering experience in a multitude of fields and areas. Fifteen of those years have been
providing manufacturing, engineering, and National Instruments (NI)
hardware and software development services and support with LabVIEW and
other NI products.
Hardware/Software
design Engineering, Systems Integration and LabVIEW development are a
key focus of my services with proficiency areas including test and
measurement, data acquisition, instrument controls, vision systems,
R&D product development in industrial automation machines,
bio-medical devices and fiber-optics sensors.
I
have been providing engineering services to fortune 500 companies and
small to mid sized corporations across California, Pennsylvania, New
Jersey and Massachusetts. Since its inception, INVENTEERING has
provided engineering solutions to a diversified industry of
manufacturing, engineering, avionics/aerospace, communications,
automotive, bi-medical and defense. I can provide project solutions and
hardware/software engineers for both large and small projects.
Please contact me to discuss any engineering hardware or software needs you may have.
Best Regards,
George Miles
INVENTEERING, Inc.
3943 Riviera Dr. Suite A
San Diego, CA 92109
Tel: 858-273-8483 or 858-926-5927
Fax: 858-270-8780
Skype: skype.gmiles (Free Internet Video
Phone requires Skype™ Software)
Email: [email protected]
Website: http://www.inventeering.com
Message Edited by [email protected] on 04-11-2008 08:32 AM
Message Edited by [email protected] on 04-11-2008 08:33 AM
Message Edited by [email protected] on 04-11-2008 08:36 AM

Similar Messages

What is the term " per user" in sqlserver developer edition licensing .

Folks,
I have to test my product with SQL Server 2012 database. Based on the search on ineternet, I know I have to get hold of Developer Edition
and i should go with "per user" licensing model for Developer edition . I am a bit confused here on what type of users they are ?
SQL DB Administrator user
Application Users account accessing the Database
System Account accessing the Database
Can some one please clarify.
Thanks

The Product Use Rights document is installed with the instance. EG
C:\Program Files\Microsoft SQL Server\120\License Terms\SQLServer2014_License_DEV_1033.rtf
Which states in relevant part
1.
INSTALLATION AND USE RIGHTS.
a.
General. One user may install and use copies of the software to design, develop, test and demonstrate your programs. You may not use the software on a
device or server in a production environment.
b.
Demonstration. Any person that has access to your internal network may install and use copies of the software to demonstrate use of your programs with
the software. Those copies may not be used for any other purpose.
c.
User Testing. Your end users may access the software to perform acceptance tests on your programs.
David
David http://blogs.msdn.com/b/dbrowne/

Develop a user interface in Lecroy1451 by Labview

Hello everybody:
I currently working with LabVIEW and I develop a user interface to the
hardware.
I have finished with most of the instruments and I now have to dialog
with a LeCroy HV1451 High Voltage multichannel power supply.
It has a simple dedicated language and communicates via RS232.
For instance, if we send ‘'‘ 28 LD RUP 11 500'' to HV-Lecroy 1451, it
will answer " 28 DMP 11 -0.1 -12.1 -20.0 488.6 488.6 -2550.0 1 ". This
is clear and simple but there is a lot of work to extract each piece of
information.
I wonder if Labview could help me with a starting program using this
device ?
Or with general tips or general examples to disentangle all the sub chains.
Thank you very much, any answer will be appreciated.
Yang

Hi Yang,
Alan from LeCroy here.. The company Universal Voltronics purchased this product line from LeCroy ~10 years ago. You might want to contact them for support - http://www.voltronics.com.
Regards,
Alan
Alan Blankman, Technical Product Marketing Manager and LabVIEW Developer
LeCroy Corporation
800-553-2769 x 4412
http://www.lecroy.com
[email protected]

Seeking Labview Developer in Nothern Illinois

LabVIEW Developer
Company: Tecnova
Description
Tecnova is a National Instruments Alliance Member with a growing LabVIEW Department.
Come join our expert team!
We are looking for a self motivated LabVIEW Developer who will own their projects, complete tasks on schedule and on budget while building a relationship with the customer.
Must have broad experience in the following areas:
* Program and document robust LabVIEW applications which include user Interface, database, test sequencing, instrument communication, data acquisition and PID control
* Design and execute software test plans
* Prepare end user documentation and help file content
* Develop automated test, data acquisition, and control systems
* Contribute to multiple projects, and help develop pushing-the-envelope technology
* National Instruments hardware (PXI, cRIO, Field Point, etc.) experience desired
* Contribute to system design and specifications
* Involves extensive customer contact and moderate travel within Chicagoland area
* Must be intelligent, creative, and self-motivated
Requirements
* BS in Computer Sciences, Physical Sciences or Engineering
* 3 years of practical experience in LabVIEW programming
* High comfort level with scientific and technical terminology and the willingness to learn
* Test and measurement experience
* Must be self directed and able to meet objectives as directed
* The ability to effectively work independently in a fast paced environment, with experience adapting to changing requirements and to rapidly absorb new concepts and apply them effectively is essential.
* You must also have good communications skills. Presentation and communication skills, as well as being able to work in a team, are crucial.
Preference will be given to applicants with the following skills:
* Certified LabVIEW Associate Developer (or better)
* National Instruments hardware (PXI, cRIO, Field Point, etc.)
* Communication protocol (RS-232, GPIB, TCP I/P, USB, Bluetooth, etc.)
* Motion control
* Vision control
* PLC (Allen-Bradley, Honeywell, Modicon, Siemens, etc.)
* Schematic capture (OrCAD, AutoCAD, etc.)
* Database connectivity
* Application and instrument driver layers
* Experience with National Instruments PC based DAQ devices
* Experience with various sensors and transducer signal conditioning (microphones, accelerometers, temperature sensors, etc.)
* Actively involved in the LabVIEW community
Additional Requirements:
* Local Candidates Only
* Location: Gurnee, Illinois (Northern Chicago Suburb)
* No 3rd party resumes accepted. Principals only, no agencies or contractors
* Must be a Citizen or Permanent US resident, authorized to work in this country for any employer
* Because of the immediacy of this position, we are unable to sponsor people at this time.
About Tecnova:
Tecnova is a leading electronic product development and engineering firm that provides custom electronic hardware, mechanical, and software solutions. We offer exciting professional challenges, variety, and plenty of opportunity to roll up your sleeves and make a difference. Located far north of Chicago in Gurnee, Illinois, we offer excellent salary/benefit package with 401K. We are looking for innovative, creative, results-oriented people that desire a wide variety of projects in a challenging, fast-paced environment.
For more information about Tecnova see our website at www.tecnova.com.
Contacting Tecnova:
For immediate consideration, please send resumes to [email protected]

I am writing to put myself forward. As you can see from my CV, I have many skills pertinent to this role gained for less than 1 year as a successful Research Assistant. I am having very good knowledge in mathematics.I wish to move into this sector because it is a fast-moving environment and I am also interested in new technology. The skills that I have and believe to be highly relevant to this job and your company which include: Analytical thinking, Self motivated, Fast learner and staying calm under pressure. Additionally, I have undertaken CLAD course and qualified with 80% and believe my unique blend of skills can offer a great deal.I am confident that I possess the attributes you’re looking for and that my experiences gained in Research Assistant would provide invaluable insight and capability to your organization. I would welcome the opportunity to discuss my application in person.
Attachments:
Resume.doc ‏44 KB

How to set session timeout per user

Hi,
Ho do I set the session timeout per User in the
Application.cfm File??
I tried using
<cfif SESSION.UID EQ 1>
<CFAPPLICATION NAME="appControl" SESSIONMANAGEMENT="Yes"
sessiontimeout="#CreateTimeSpan(0,0,20,0)#">
</cfelse>
<CFAPPLICATION NAME="appControl" SESSIONMANAGEMENT="Yes"
sessiontimeout="#CreateTimeSpan(1,0,0,0)#">
</cfif>
But this didnt work because the cfapplication seems to have
to be at the top before I call the variable SESSION.UID which
I set on my login page..
Someone know how to do this??
Regards
Martin

Martin,
Your code example cannot work because the "session" scope
doesn't exist until your application scope is defined. So you have
to handle this manually. Here's how you can get it done. First,
define your application to the maximum sessiontimeout you want to
have.
<CFAPPLICATION NAME="appControl" SESSIONMANAGEMENT="Yes"
SESSIONTIMEOUT="#CreateTimeSpan(1,0,0,0)#">
Then, I don't know how you are doing your login
authentication but when you have authenticated the user, you need
to define the userid and the most recent activity in the session.
Also determine your timeout value based on the userid. See example:
<CFIF IS_AUTHENTICATED>
<CFSET session.user.uid = form.userid>
<CFSET session.user.most_recent_activity = now()>
<CFIF session.user.id eq 1>
<CFSET session.user.timeout_mins = 20>
<CFELSE>
<CFSET session.user.timeout_mins = 1440>
</CFIF>
</CFIF>
Now, all you have to do is check whether the user has been
idle for too long and kill the session by purging all session
variables. For example:

<CFIF structKeyExists(session, "user") and
structKeyExists(session.user, "id")>

<CFIF datediff("n", session.user.most_recent_activity,
now()) gt session.user.timeout_mins>

<CFSET StructClear(session)>

<CFELSE>

<CFSET session.user.most_recent_activity = now()>
</CFIF>
</CFIF>

ISE 1.2 & AD & Meraki - Per User Group Policy ?

I am working on a PoC for a deployment in an MDU. We are using Meraki switches and access points. There are 250 units in the building, each unit will have it's own subnet. The goal is to have the tenant be able to connect to a common building SSID and be placed into their assigned VLAN. There will also be physical ports in each unit that will need to do the same. I am trying to figure out a way to use ISE to authorize on a per user basis and not based on groups of users. On the Meraki system there are group policies that will assign the VLAN for the user as well as any type of layer 7 firewalling and bandwidth control. So there will be 250 group policies, one for each unit. There is a deployment guide that shows how to setup ISE for use with Meraki and it is great but it assumes that there will be large groups like Employees, Contractors, etc.. that will be used. This is where I'm being tripped up, also... this is my first swing at a NAC deployment so I have a lot to learn.
1.Can I setup each user in Active Directory to have a tag that ISE can then forward on to Meraki for the group policy? Say it's unit 101 and I have a group policy called 101 in Meraki, Meraki documentation says to use the Airespace-ACL-Name attribute in ISE to indicate the group policy to use. This gives me the ability to place a group into that policy but not an individual. Or would this be better done by creating the users in ISE directly? Omit AD entirely?
2. Each unit will have devices that will need MAB because they are not 802.1x compatible. I need to do the same as above with them. I would create a separate SSID for these devices but then use the MAC address to authenticate them but will need to authorize them to go into a specific group policy.
I know this isn't a typical ISE application but I think that this will work really well in the end, just need to iron out these details and get a test system functioning. Any help would be greatly appreciated!!!
Thanks,
Nathan

Please find the Meraki_ISE integration doc. in attachment.
When VLAN tagging is configured per user, multiple users can be associated to the same SSID, but their traffic is tagged with different VLAN IDs. This configuration is achieved by authenticating wireless devices or users against a customer-premise RADIUS server, which can return RADIUS attributes that convey the VLAN ID that should be assigned to a particular user’s traffic.
In order to perform per-user VLAN tagging, a RADIUS server must be used with one of the following settings:
MAC-based access control (no encryption)
WPA2-Enterprise with 802.1x authentication
A per-user VLAN tag can be applied in 3 different ways:
The RADIUS server returns a Tunnel-Private-Group-ID attribute in the Access-Accept message, which specifies the VLAN ID that should be applied to the wireless user. This VLAN ID could override whatever may be configured in the MCC (which could be no VLAN tagging, or a per-SSID VLAN tag). To have this VLAN ID take effect, “RADIUS override” must be set to “RADIUS response can override VLAN tag” under the Configure tab on the Access Control page in the “VLAN setup” section.
The RADIUS server returns a group policy attribute (e.g., Filter-ID) in the Access-Accept message. The group policy attribute specifies a group policy that should be applied to the wireless user, overriding the policy configured on the SSID itself. If the group policy includes a VLAN ID, the group policy’s VLAN ID will be applied to the user.
On the Client Details page, a client can be manually assigned a group policy. If the group policy includes a VLAN ID, the group policy’s VLAN ID will be applied to the user.

An OS-Intergrated place to store per-user application configuration files.

A Chairde,
I'm developing an application that could be deployed on multiple platforms. I'm looking for a location to store per-user configuration files in a OS-integrated way.
I use a utility class to determine the OS of the users machine. I know from experience that Windows NT5+ likes to store per-user settings/configurations in the %APPDATA% path (which is usually C:\Users\<username>\Appdata\Roaming\<vendor>\<software> etc.) I'm using a call to the environment labels to determine it's location.
I'm a linux user myself, so I'm aware that most UNIX based Operating Systems like to store personal configurations in hidden folders in the user's home directory (ex /home/<username>/.<application> etc.), Obviously, I'm using a call to the system property user.home to determine that location.
My Question is in relation to Mac OS and Mac OS X, where would it be a safe location to store per-user configurations? I know OS X is BSD/UNIX based so is it safe to assume to store them as a hidden subfolder of the user.home directory? What about Mac OS classic? Where are per-user settings stored, or is it like Windows 9x and NT4 and lacks proper multi-user setups (although NT4 is somewhat more prepared then 9x) ?
It would be much appreciated if anybody has any ideas.
Is Mise,
Seán Mac Aodha
PS. I'm not using Javas Property files etc. I've rolled my own exchangeable format for storing key,value pairs.

I've used databases in the past to store local files but clients have sometimes run into trouble when the database daemon goes down or doesnt start-up normally because of a "improper" shutdown etc.
In my own implementation of "Settings Files" i have serialized hashtables marked with appropriate metadata stored to the users "application data", a backup or original copy of those settings in the common directory shared by my application framework and then in a networked enviroment, the Settings can be hosted on a database server, so the user can travel between client machines and keep their settings (and files) with them.
I have, with a bit of googling, come across the most obvious page i should have looked at in regards to Apple Mac OS X
http://developer.apple.com/documentation/MacOSX/Conceptual/BPFileSystem/Articles/WhereToPutFiles.html
According to Apple's guidlines, the most suitable place to store User configuration files is in the ~/Library/Application Support/<Application Name> directory.
and for System-wide configuration files, /Library/Application Support/<Application Name> rather then storing them with the application in the /Applications directory.

Using Windows Server 2012 per-User RDS CAL on Server 2008 R2 Session Host

I have a Remote Desktop Licensing Server setup on my domain controller running Windows Server 2012 R2. I have installed a
’Windows Server 2012 Remote Desktop Services per-User CAL’ there and activated the licensing server already.
Currently I use ONLY Windows Server 2008 R2 machines as RDS Session Hosts (in the future I plan to transition them to 2012 R2, hence the CAL I bought is
already in the newest version).
I have already configured my WS 2008 RDS Session Hosts: set
Per-User licensing mode and specified license server address. The connectivity between my Session Host(s) and my License Server seems to be ok as the
Remote Desktop Session Host Configuration window on the Session Host correctly lists the 2012 per-user
license (CAL installed on server) from the license server.
On the License Server I can also see event logs entries (in
Microsoft-Windows-TerminalServices-Licensing/Admin), indicating that the user has been issued a license.
The issue I am having is that the license being issued is
2008 Per User CAL license (Build-in OverUsed - temporary) and not the 2012 Per User CAL license which is the only license installed on the server. According to the RDS CAL interoperability matrix at
social.technet.microsoft.com/wiki/contents/articles/14988.rds-and-ts-cal-interoperability-matrix.aspx, I was expecting the 2012 license to be backward-compatible with 2008 client (and that
in the absence of legacy licenses, the (only) 2012 license would be used for all clients connecting to the licensing server)
Before I bought my license, I found this document:
download.microsoft.com/download/3/D/4/3D42BDC2-6725-4B29-B75A-A5B04179958B/WindowsServerRDS_VLBrief.pdf
which says that - "newer version RDS CALs can be used with an older version of the server software" (In section FAQ, Q4), which means to me that
the 2012 license would work as-is for the 2008 Server and gives me flexibility when upgrading to the new server version.
How can I make this CAL work in my environment?
Note:
I have already explicitly disabled
Prevent license upgrade Group Policy setting which I assumed would fix the issue but nothing has changed.
Then I have enabled License server security group Group Polity setting
and added computers from my domain to RDS Endpoint Servers AD group. I have also created new AD group called
Terminal Server Computers and added the computer accounts there, but it changes
nothing. Reference - technet.microsoft.com/en-us/library/ee791761.aspx , technet.microsoft.com/en-us/library/cc725704.aspx and blogs.msdn.com/b/rds/archive/2009/09/17/control-the-issuance-of-rds-cals.aspx.
I found one potential ‘workaround’ which involved manually downgrading my CAL license by calling
Microsoft Clearinghouse. I am very reluctant do to so because, as I upgrade parts of my infrastructure to Server 2012, I’d need to then ask Microsoft to manually upgrade a part of my license back as well.
Am I missing something? What should I do to get my 2012 CAL to be issued to 2008 R2 server

Hi, I have tried several other possibilities.
I change expire date for my temporary assigned license (2008 CAL overused). It can be done, by changing Active Directory user properties – msTSExpireDate. When I restart my Session Host server and logged again, my license was renewed
for next 60 days (event ID - 4145).
I also delete information about license for this user (clear msTSExpireDate and msTSLicenseVersion). And the license was successfully removed from License Manager. After another SH restart it gets the same – 2008 overused – license
(event ID 4143 - license server has successfully issued …)
I now, that changing info in AD attributes is a little trick, and this is not a real value - only a reference, but it was useful to delete or change expiration date of license. But it didn’t change type of license as I expected.
Reference -
http://discussions.citrix.com/topic/243320-windows-2008-licensing-questions/
To TP:
I have found your post with information:
If you have a Server 2012 RD Licensing server you may install your 2012 RDS CALs on it (no downgrade necessary) and then set your Server 2008 R2 RDSH to
use the 2012 RDL server. The 2012 RD Licensing server will automatically issue the CALs as 2008. -
https://social.technet.microsoft.com/Forums/windowsserver/en-US/6046ded1-96bf-4d79-89ce-38aac2a6694e/can-we-use-windows-server-2012-rds-cal-license-in-rds-2008-r2-server?forum=winserverTS
And it showing my situation in brief. I also found
similar problems, but the solutions don’t meet my expectations.
https://social.technet.microsoft.com/Forums/windowsserver/en-US/dcfb1966-89a8-4b5d-bf5a-ff03ac0b7a66/rds-cal-licenses-not-recognized?forum=winserverTS
– “sudden all of the CALS were available”
https://social.technet.microsoft.com/Forums/windowsserver/en-US/f1228599-8452-4a3e-a263-061de14bfcfe/server-2012-rds-builtin-overused-cals-issue?forum=winserverTS
– “this should go away after a while”
Is there a way to determine this time you mentioned before? Or should I just wait patiently…

Max. No. of processes per user in Linux(Form6i related)

I have problem with Form6i in Linux when the resource is used up. I want to find a way to limit the number of form server processes. In other UNIX they is a kernel parameter to limit the Max processes per user. Any idea to do that in Linux?
Thanks!
null

That you have not reached this limit indicates that you are doing a good job!
Tell the interviewer that if the limit is reached, then there is a design error.
If the interviewer presses harder, then there are two technical solutions. The first is in the authorizations tab of PFCG to use the "read old and merge new" option via the "Expert options". This you are probably doing hence you don't have the problem, but it can also be triggered manually within the menus in the authorization data.
There is one more joker you can play, but you must first tell the interviewer that they are using "Edit old data" to support a design error in the way they build and maintain roles.
Cheers,
Julius

Can we save the printing preference of FR reporting per report per user?

We are using Hyperion Planning and Financial Reporting version 11.1.1.1. Some of our users will generate PDF for printing (HTML format is badly printed out).
However can we have the option to save the printing preference of each FR report? As some reports are in portrait and some are in landscape format, it is preferred users can setup the printing preference per user per report so that they can choose the paper size and printing orientation.
Thanks in advance!

OK; should this be submitted to http://developer.apple.com/bugreporter/?
I'm unsure about the best setup for this, but here is some brainstorming:
- In Workgroup Manager or Directory, an administrator can designate a user to 'auto-accept' invitations if the user is available at that time.
- Ideally, one would be able to establish an ACL for auto-acceptance, so that a user or admin could designate a list of users/groups from whom a user should auto-accept invites.
- If a user is set to auto-accept, it is reasonable to assume that this user is either unable to use iCal or does not regularly check their calendar, so invites that are not auto-accepted should be handled somehow. For example, a notification could be e-mailed to the user, an invitation accept/decline message could be sent to the iCal account of a designated administrator or delegate, etc.
I am imagining this for the case of my division, in which we have one person scheduling for lots of people, but I think that the idea of being able to delegate a person to be able to add things to one's calendar without confirmation and to confirm invites from non-privileged users would be useful in other cases as well. For example, a boss wants an administrator/secretary to be able to schedule things on his/her calendar, but does not want this person to be able to see all of the details of existing items on that calendar. I suppose that in this case it would be unclear to which calendar the designate should add the event initially, but I'm sure that for many people the privacy of the boss's calendar is more important than the inconvenience of having to create a throwaway calendar for events created by the delegate.
If anyone has any thoughts to help refine this, please let me know and I will incorporate that into my writeup.
Thanks,
Greg

LabVIEW developer in UK

My company a large multinational with more than 10000 employees worldwide, is currently looking for an "entry level" LabVIEW developer in the North East of England, although all levels of experience could be considered.
If anyone is interested, please email your CV and Covering letter to [email protected]
This is the Job description:
1.    General information
The Engineer will work as part of a team developing software and hardware applications that support the needs of manufacturing. These will include in-house developed solutions for automated assembly, functional test and production monitoring. The Engineer will develop expert knowledge of the company's products and systems in order to best support these developments.
2.    Job Objectives
Efficiently design, program, document and maintain robust, user friendly, software and hardware solutions that reliably provide the required functionality and performance levels to support manufacturing processes.
3.    Opportunities
Work with a wide range of technologies (software, hardware and product).
Develop personal skill levels with support towards achieving recognized LabVIEW qualifications.
Participate in both site wide software initiatives and stand alone test or application solutions.
Work alongside experienced LabVIEW developers.
4.    Place in the organisation
Direct Manager: Manufacturing Engineering Manager            (via Senior Engineer)
Reportee(s):            0
5.    Description of duties
Contribute to generation of software requirements and specification documentation
Generate appropriate documentation and records during software creation, amendment and testing, utilizing standard revision control and review procedure.
Propose and implement new/best practice software development techniques
Contribute to creation of future strategic targets
Assist with the training and guidance of apprentices, operators or others where appropriate
Undertake training and development activities where appropriate
Occasional travel off-site to conduct inspection of new equipment, attend training courses and provide support to remote sites
6.    Required competencies
Education:
Essential
Degree level qualification or similar experience
Desirable
Degree in Science, Engineering or relevant Technical Subject
Experience:
Essential
Previous experience creating software to interface with hardware using LabVIEW
Desirable
Experience of an industrial work environment
Skills & knowledge:
Essential
Experience of LabVIEW programming, CORE 2 level
Experience with automation hardware
Desirable
Knowledge of developing test software for automatic execution
Experience with other programming languages (C, Assembler, Java etc)
Object oriented programming knowledge
Knowledge of SQL database implementation

Dear Sir/Madam:
May I know what is the company? I would like to know its name in order to be aware of future similar opportunities.
Kind regards.
Attachments:
Presentación Julio 2011.ppt ‏2943 KB

Saving report per user

Hi All,
I have developed an interactive report. There is a save option, but when I click on that it says "This report will be saved for all users" How can I make the report save per user?
-Vatsa

1. Yes that user will need an account that way there is a unique user id associated with the IR report parameters.
2. The reason it is says that is because you picked save as default report for all users. That is the report everyone will initially see. After you have created a login for the user, log in as that user. Then modify the IR as needed. Lastly click the gear and then click save report. there will be a dropdown to choose to save as a named report. Choose that and then the report will be saved onto a second tab viewable ONLY BY THAT USER.
Please let me know if you need anymore help.
-Ghoulies

Labview Developer

Looking for contract developing graphic user interfaces (G.U.I.) and
applying data acquisition techniques.
Call Andrew: (514)-333-1622
Montreal, Quebec Canada

It is not entirely clear if you are looking for work or offering work. In either case try one of the following forums:
LabVIEW Job Openings
LabVIEW Developers Seeking Employment
LabVIEW Champion . Do more with less code and in less time .

Maximum number of MRAS requests / allocations per user?

Hello,
I have a test C++ SIP application that registers to a Lync edge server and is able to perform MRAS requests to it.
The MRAS responses allow me to create TURN allocations on the TURN component of the edge server. However, I seem to be hitting a limit with the number of simultaneous TURN allocations I can create with a single registration. I seem to be able to create
a maximum of 50 TURN allocations for that single registration.
Is this a configurable option - either per user / per edge server etc - for the maximum number of TURN allocations a single Lync user can simultaneously have? Or is there anything else I can put in the SIP/TURN signalling to increase this limit?
Many thanks,
Simon

Hi,
You may need to custom your own Lync server, so you might post the issue on Lync MSDN forum and more developing expert will help to verify the information using Lync SDK. Thank you for your understanding.
http://social.msdn.microsoft.com/Forums/en-US/communicatorsdk/threads
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Render page as per User language after login

Hello,
I am using Jdev 11.1.1.6 with ADFBC and Faces.
In our application, user can set default language. It is expected that after login, all contents should be displayed as per user language locale (assuming locale is supported and locale specific resource bundle exists).
So there is SignInPage and HomePage. I need to access the DB (using methodAction binding for a AM method, that reads the user preference and returns the language) before forwarding to HomePage.
Code to forward to HomePage is something like this:
FacesContext ctx = FacesContext.getCurrentInstance();
RequestDispatcher dispatcher =
request.getRequestDispatcher(forwardUrl);
dispatcher.forward(request, response);
ctx.responseComplete();
End User locale handling is done by defining ViewHandler class in faces-config file. Implementation is explained here
Problems faced:
1) I tried to execute the operation binding but got null pointer...in FacesCtrlActionBinding._execute(FacesCtrlActionBinding.java:252)
2) I tried to redirect using external.encodeActionURL(actionURL) but got illegalStateException...Response is already committed
It works fine if user after login either just press F5 to refresh the page OR reset the language again using the preference screen.
How do I get it to work at login? Where can I tap-in the methodAction call between SignInPage and HomePage, so that HomePage is rendered according to language?
Any help/pointer is highly appreciated.
Thanks,
Jai

Hi,
1) I tried to execute the operation binding but got null pointer...in FacesCtrlActionBinding._execute(FacesCtrlActionBinding.java:252)
If you mean ADF operation binding then this only is available if a request is routed through the binding filter. Note that the PageDef file for a page needs to be parsed before the content becomes available as an object at runtime.
2) I tried to redirect using external.encodeActionURL(actionURL) but got illegalStateException...Response is already committed
Why don't you use facesContext --> externalContext --> redirect(...) to perform the redirect, The dispatcher.forward() surely doesn't do this
3) How do I get it to work at login? Where can I tap-in the methodAction call between SignInPage and HomePage, so that HomePage is rendered according to language?
Programmatic authentication as explained in the Fusion Developer Guide (chapter 30 if I recall correctly) would give you a chance to set the language. However, the language is not set on the ViewObject but should be set on JSF by changing the default language, e.g.
FacesContext.getCurrentInstance().getViewRoot().setLocale(Locale.ENGLISH);
Frank

PDA LabView development per User's manual.

Similar Messages

Maybe you are looking for