Pdf and djvu viewer with bookmark support.

Hello everyone.
Can someone advise me pdf and djvu viewer with a bookmarks support?
I was using evince before but some time ago a bookmark support
ceased to work for me.
I mean a bookmark support with ability to open saved documents
after restarting of viewer.

Thanks for answer. As far as I discovered apvlv remembers the last position in pdf and djvu files but opens it only in pdf files correctly. At least it happens with my djvu files.

Similar Messages

  • When running Firefox with normal view with bookmarks and tabs the display for the tab is jumping up and down about 1/4 of inch - display is ok if used in full screen but when go back to normall havers again. this ony started happening last night after

    Am having problems with display hovering in open tabs. I used Full screen last night when browsing for first time and since then when I go back to normal view the window shakes up and down about 1/4 inch and have to go to full screen for steady view. The toolbars are all steady it is only the web page.
    == This happened ==
    Every time Firefox opened
    == Last night after using full screen.

    Do you have any saved bookmarks on the Bookmarks Toolbar, or that that Toolbar empty and you have it being displayed??
    Try opening View > Toolbars and click on the Bookmark Toolbar item to remove the check-mark, and then see how that affects that "jumping" or vertical oscillation of the UI.
    If that doesn't solve your problem, you can try the Firefox SafeMode and verify that problem doesn't exist in that troubleshooting mode.
    [http://support.mozilla.com/en-US/kb/Safe+Mode]
    If it is gone in SafeMode, see this:
    [http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

  • Performance, minimum bandwidth, thumbnail previews for PDF and InDesign Files with web content viewer

    Hi,
    We are considering using DPS with a web content viewer for large PDFs and/or InDesign files. The client using a web viewer might have very limited bandwidth (some as low as 256Kbps). We ask:
    1 - How well does the web viewer perform with very large PDFs and InDesign files  (500 MB+) with limited bandwidth? Does the file stream in chunks and the PDF shows as soon as the first page or two are available, with the rest loading in the background, or does the entire file come down in one part and then shown?
    2 - Can PDF and InDesign files support thumbnail previews? For example, one image per PDF page and user can scroll forward and back.
    Your thoughts and comments are greatly appreciated.
    Thanks!
    -Stephen

    Hi Stephen,
    The way the web viewer works is that it converts the PDF/InDesign files to PNGs along with additional HTML assets. Assets are downloaded as they’re ready for a given page (e.g. first, page 1 is filled with its assets as they become available, then page 2, etc), so a reader wouldn’t need to wait for the entire article to load. The next few pages are also loaded in the background, so the reader wouldn’t be likely to notice lag as they flipped through pages to the next page after reading the current one. So the lag will depend on the size of an individual page.
    For your question around thumbnails, the web viewer does not load a preview image so the reader would need to wait for the assets I described above to load.
    Hope this helps...
    Brian

  • PDF viewer with selection support?

    I need to copy and paste some text strings from PDF document.
    To my suprise - PDF viewers generaly don't support selecting text.
    For example in epdfview and in gv I can't find way to select text with mouse.
    In xpdf it is possible, but it isn't very natural (try it yourself).
    Are there any other good PDF viewers with selection support?
    Or do you know how to enable it in epdfview?

    when you create a PDF you can deny copy, printing and other stuff. maybe the pdf document has copy text deny and you cannot select any text

  • OLAP on 11g and Materialised Views with Multiple Value-Based Hierarchies

    Hello OLAPians
    I am trying to setup Orable BIEE to report on an OLAP cube with pre-aggregated data. As OBIEE is not able to hook into the OLAP directly i have to create an SQL cubeview.
    Currently i am on a 10g OLAP environment and am using the oracle sample SQL cubeview generator to create an SQLview of my cube.
    The cube itself has multiple dimensions and these dimensions have multiple VALUE-based (ragged) hierarchies and dimension members can be shared across hierarchies also.
    Initially i had a problem running the view generator plugin because there is a bug within it that does not finish if there are multiple value-based hierarchies present. I was able to get around this by manually editing the limitmap for the cubeview and manually creating the SQL view.
    The question that i want to ask is how robust is the 11g materialised views with multiple value-based hierarchies and the sharing of dimension members across different hierarchies?
    Has anyone successfully been able to create a cubeview and import it into OBIEE without the hassle of manually editing the limitmap?
    A problem arises with the value-based setup whereby if the client creates a newer depth in the ragged hierarchy, i need to manually create the limitmap and the cube-view over again, and then re-map the BI Administration mappings.

    The simple answer to your question,
    how robust is the 11g materialised views with multiple value-based hierarchies...?is that materialized views are not supported on top of value-based hierarchies in 11g. The reason is that it is not possible to write a reasonable SQL statement that aggregates a fact over a value-based hierarchy. Such a SQL statement is necessary if we want to create a rewritable MV on top of the cube.
    But I suspect this is not what you are really asking. If you are trying to set up OBIEE on top of the cube in 10g using the view generator, then you will probably want to use the "ET VIEWS" that are generated automatically in 11g. These are generated whether or not you enable materialized views on top of your cube. I am not aware of any issues with the generated value-based hierarchy view support in 11g. Members may be shared between value hierarchies and you will not need to generate or modify limit maps.

  • Book Module: Export to PDF and Blurb stops with error at two page spread

    I have a 66 page book created in the book module..
    When exporting to PDF the export stops with the error:
    "An error occurred while saving the book.
    There was an error creating the PDF file. "
    The same occurs (at the same book page) when exporting to BLURB
    "An error occurred while creating the book."
    The creation or export always stops at the same page which is a two page spread. Interestingly there is a two-page spread before that didn't throw an error. I tried to move the problem page to the end of the book. That didn't help because the next two page spread in the book throws an error.
    Any ideas or help?
    Lightroom version: 4.0
    Computer: Windows 7, Quadcore, 8 GB RAM

    Hi, sorry I do not have a solution but I too have a very similar issue in that the book is the same size but the export to PDF does not start at all
    I have tried reducing the image dpi settings. Jpg quality and still nothing
    The only success I have had is if I duplicate the book, delete all but 8 pages and then export at full dpi settings of 300 and 100 percent jpg quality
    Any more pages and nothing
    It's a great tool and would buy it if this feature actually worked. Oh yeah I only have the trial version at the minute to give it a good thorough test
    I have looked for solutions but like your query they are all unanswered
    Does adobe actually offer any support or is this all user solutions?
    Did you find a solution by the way?

  • How to upload pdf and doc/docx with ADF?

    I am using 11.1.2.3.0,
    I want to be able to upload pdf and/or word documents in my web application. Can anyone help me with a tutorial or a sample example because all what I am finding till now are related to processing photos but it is not my case.
    Thank you in advance.

    I was just reading this, but this guy didn't fix his problem till the end of the thread.. However can you help me on how to implement at least the "uploadBean" class because he in his post showed only the jspx file and the "backing_uploadfile" bean. I understand I annoying you but I am new to this kind of stuff :) Thank you

  • UIX and hGrid Component with BC4J support

    Hi!
    I heard, that UIX Developer Team developing hGrid component with BC4J support. Does anyone know when it's ready?
    Thanks

    I'm not sure exactly what you're asking, but the uix bc4j tags have been deprecated in favor of ADF, so there will not be a uix bc4j hgrid tag. For 10g production there will be an hgrid in the data binding palette.

  • BOBJ 6.5 - Infoview - Decimals Changing between PDF and HTML view

    HI,
    We have an issue with report generated in Webi 6.5.with figures shown to 2 decimal places. When viewed in HTML the figures are displayed correctly e,g, 7.8. When viewed in PDF format, the decimal point moves on random figures e.g. 8.7
    This is such an issue the customer wants to turn-off the ability to save to PDF!
    Thanks in advance
    Roy

    Hi Ted!
    Thanks for the reply and suggestions.  I don't know if there is a different version of the viewers folder that I should be using but I am using the ones from this folder:
    C:\Program Files\Business Objects\Common\4.0\crystalreportviewers12
    That said, I didn't see anything amiss in Fiddler and when I looked in Firebug at the script portion where it was constructing the FlexParameterUI panel, I could see where it was capturing the report parameter names and prompts.  I decided to rip out all the parameters out of my report and voila, it loaded up fine in the viewer.
    I then added a new string parameter giving it a simple short name (Test1) and, initially, I did not use this parameter in the report.  It loaded up in the viewer just fine too.
    I then added the parameter to the report header and I was back to the same problem - it would not load in the viewer and the error was the same as the subject line shows.
    For the record, I am using Crystal Reports 2008 v12.2.0.290
    So is there some other crystalreportviewers12 that I should be using?
    Kind regards,
    Evan

  • Serious bugs in pdf and doc view

    Hello
    I have looked on the forum for other postings on this and have not found them if they exist. I have had a Pre Plus for about six weeks (Verizon) and overall love it and am glad I got it. Hoping some things like GPS get improved (which I know is most likely Verizon not Palm) but this bug is the first thing that has the potential to seriously hamper my experience with the phone:
    This week I took a work trip and before leaving added several (5-12) docs and pdfs to my Pre so I could access them on the fly during the trip when it was not possible or practical to use my laptop. This included some pdfs of directions and maps since the GPS is not up to snuff on the Verizon phone. Others were longer documents I needed to refer to when out in the field (ag related work visiting farms).
    Here's the problem, which applies equally to both doc and pdf view:
    -menu freezing: more than half the time the menu would freeze. In other words, not let me scroll. I could open documents on the screen but not scroll to see others further down.
    -doc and pdf file freezing: the file would often work fine for a few minutes, i.e. I could zoom, move across the page with the touch screen, change pages, etc. with no problem. But then after a few minutes they would often freeze, allowing me to see only what was currently on the screen. Shutting down the app and reopening only worked sometimes. I often had to do that many (5-7) times to get it to work again. Maybe rebooting would have worked but the Pre takes way way too long to boot up for that to be at all practical in the context I was using it in.
    Do these apps break down when too many docs or pdfs are loaded? I wouldn't consider a dozen too many so I am hoping the answer to that is no.
    I really hope Palm figures this out and can fix it. (I hope they allow for more zooming while they're at it.) In the meantime, are there alternative apps to use for docs and pdfs? I would pay a reasonable price for it if it exists. I have only found ebook readers so far.
    I also posted this on the precentral forum here
    http://forums.precentral.net/showthread.php?p=2467182#post2467182
    and you'll see that although most people report that they do not have this problem, a couple of other people apparently do.  For me it is a big problemwhich if not fixed will affect decisions on future phones...
    Thanks to anyone who can help.

    Did you re-try cloning with CCC after you had first re-trashed the items *directly from the 502 folder window* you obtained via Go to Folder?
    If you can see the items in the *Go To Folder> /.Trashes/502* window, then you apparently have *two different* .Trashes>502 folders. The items that keep re-appearing in your Trash icon window (the ones you did the GetInfo on) are in the HD>.Trashes>502 folder of your external drive. The Go to Folder command that I gave you is looking at the HD>.Trashes>502 folder on your startup drive. The Trash icon on the Dock may not look at that folder - trashed items on the startup drive normally go into Home>.Trash, a completely different place.

  • Bug in PDF and print output with gradients?

    I've got a document that makes use of a gradient fill in a table, and I find that (at least for the < 2pt border widths) the border has a thin white line to either side. It shows up readily in both the print and PDF outputs. Is this a known issue? Where can I file a bug for it? I'm using iWork 6.0 with the latest patches applied. This all worked and looked fine under iWork 5.0. :-(
    <br>
    PowerMac G5   Mac OS X (10.4.7)  

    What are you using to view/print the pdf's?
    Make sure you have the latest Adobe Reader, found
    here:
    Adobe - Adobe Reader - Download
    I'm using Preview. I did check it using Acrobat reader on Windows, and the problem still exists. I suspect there was an error made (by Pages) computing the edge of the rectangle for the gradient. It renders correctly in iWork '05.
    -John

  • Exporting file to pdf and screen view file dark, print file ok

    I am using Mac Pages as a document editor and basic design tool. Exported pdf files look great on screen on first view, and when opened in Mac preview or even when viewed on the PC as a preview of the file. As soon as the file is opened with Adobe Reader on both pc and mac, I have an issue with the text blocks being changed to dark and unreadable. The file prints fine, but screen view is not readable. I am using the files as a linked file to be viewed on screen and need the .pdf file to be readable on screen with Adobe Reader as designed, without color and text changes.

    I am looking at the original file and I see that one of the blocks is a white background text block with black text and the other is a dark background with white text. There is a 3rd text block that is a purple color with white text and the 3rd is fine, the other white and dark background and text turn dark and unreadable. Preview still shows the file OK, but not with Reader.

  • PNG viewer with layer support

    I was wondering if anyone knew of a free or low cost viewer
    application (for Windows) that supports showing layers in a PNG
    file. These PNG files are originated out of Fireworks CS3. If you
    have any ideas, let me know.
    Thanks in advance.

    when you create a PDF you can deny copy, printing and other stuff. maybe the pdf document has copy text deny and you cannot select any text

  • How can I view a pdf file without downloading it? It seems I can't get rid of the download option. Is it possible to do this without downloading the pdf and then viewing it?

    I would like to open up a pdf file in adobe acrobat or adobe reader directly from an attachment or web page, but don't want to download it to my computer. Can I do that?

    Hi Goin crazy 2,
    If you purchased the song twice in error, contact the iTunes Store and they will review your account for a refund:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    Find the email receipt for your purchase.
    Click Report a Problem under the app that is having the issue.
    When prompted, enter the Apple ID and password you used to purchase the item, then click Report a Problem.
    Click Report a Problem next to the item you are having an issue with.
    From the Choose Problem dropdown menu, choose the appropriate issue.
    Follow the onscreen instructions and—if prompted—type a description of the problem into the text field.
    Click Submit to have your issue reviewed
    I hope this information helps ....
    Have a great day!
    - Judy

  • Split and Rename Document with Bookmark?

    Hello,
    I don't know if this is possible, but I figured this would be the place to find out. What we would like to do it split a multi page PDF document into single pages. The individual page PDF files would be renamed to it's respective bookmark in the multi page document. Each page has it's own bookmark in the multi page document so there wouldn't be any name conflicts.
    Has anyone ever heard of this, or better yet, have a script to do this? I would imagine this would be a challenging script to write, if it's even possible. If anyone with Acrobat scripting know how could please help, I would greatly appreciate it. Any type of assistance with this would be awesome!
    Thank you in advance,
    Danny

    Something like this, perhaps?
    http://try67.blogspot.com/2008/12/acrobat-extract-chapters-by-bookmarks.html

Maybe you are looking for

  • What is a null window error message in a programatically opened VI ?

    I wrote a simple VI that calls a subvi and has it opened. If I call it from the development environment - no problems; however, when, I compile the calling vi AND execute it, I get a message that there is a null window and the subvi has stopped. Atta

  • LInks over shape doesn't work

    I just recently reformatted my iWeb pages and I love them. The problem is that most of them are buried under a pictures category (I want them that way). When I created hyperlinks in iWeb it changed the color of my font. So I inserted a shape behind t

  • Phone is stuck in emergency mode?

    phone is stuck in emergency mode?

  • Wavy lines in my youtube videos

    I am a complete novice when it comes to video editing. I am not a computer person by all means.  But, i have learned the basics.  The problem i run into is, after i upload my video from Premier Elements 11 to youtube, the videos have wavy lines in th

  • Actions and Widgets

    How do you assign actions to a widget? I have a dropdown menu widget and when the user selects a menu topic, they should go to that topic. How do you assign the action? I am in Cap. 5.