PDF output does not match Frame TOC

My Frame TOC is accurate, the tags are correct.  My PDF output has the correct Units in place.  However, in the PDF TOC on the left nav,  the Unit 5 Lessons appear in Unit 4, the Unit 6 Lessons appear in Unit 5, Unit 6 has no Lessons, Unit 7 is correct.  I have spent a full day troubleshooting this.  Does anyone have an idea what the problem might be?

Strange things can happen thanks to the PDF setup > Bookmarks tab, though I suspect you have already checked that. I've occasionally shot myself in the foot by using two styles for level 2, for example, and not noticing that one of them had decided to sidle into the .pdf navigation as level 3 …
Counsel of despair, if you have full Acrobat, would be to adjust the bookmarks manually so you can hand over the deliverable. Hope someone will come up with a more convincing answer, though!

Similar Messages

  • Output does not match data sheet as only 1 report was available for selecti

    Output does not match data sheet as only 1 report was available for selection in hyperion planning.Can anyone help me in resolving this issues.Its very urgent.

    You will need to provide much more detailed information before anybody can help.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • PDF output does not refresh data in BI Publisher, XML and HTML do refresh

    I just upgraded to BI Publisher 10.1.3.4.0 and I noticed that the PDF format of the reports does not reflect recent changes in data, while XML data and HTML output do reflect changes in data immediately.
    I'm using BI Publisher to print APEX applications reports. When I change some data in APEX forms, I click again in the Print button and the data remains unchanged. I made some testing inside Oracle BI Publisher, and noticed that XML data and HTML output do reflect changes, but PDF output remains with the old data for some unknown amount of time. I cannot identify a method to force the PDF to refresh, just un-log and log in again several times until the data appears updated. This is serious because when users change data and print again, they expect the changes to be reflected in the new printable report, and may not notice that the data is the old version.
    OS is Oracle Enterprise Linux.
    Any help on this will be very welcome.
    Francisco

    Open the report in Edit Mode Click on the reports and in the properties section Uncheck the
    Enable Document Cache Property and your issue should be resolved.

  • Minidump filename and .time output does not match

    Hi,
    I have a few minidumps from different machines. As far as I know, the filename of the minidump indicates the date of dump creation and so does the .time command in windbg. But in my case these do not match for the same dump. THe date in .time is one day
    later than the minidump filename.
    Is my understanding correct about the minidump filename and .time output?
    thanks
    Kunal

    Hi Kunal,
    Can you please check if there's a difference in the date/time between the dump filename and the "Date Modified" for the dump files. You can check the "Date Modified" in windows explorer.
    Hope, that'll answer your query.
    (Please mark as answer if this resolves your query. Please upvote if this post is helpful.)
    Regards,
    Rajesh

  • Output does NOT match the layout in Oracle Report Developer

    Good afternoon,
    I am extremely frustrated. I have been designing a report that has boilerplate text that is a list of questions and possible answers. Those choices typically are "Not Answered", "Yes","No", and "Unknown". I placed a box beside each choice and place a capital X in the appropriate box, based on the results in the database. When I run the report, the text overlays text above, the grey boxes do not show and in general, the output doesn't match the layout.
    Sometimes, the questions may relate to other things and there may be as many as 10 or 12 choices. Some of those choices will be exclusive (only 1 of the 10) other times, the answer would be a "Check all that apply" type of condition.
    It appears to happen when a report reaches a certain level of complexity although I can't determine just where that threshold is at.
    I can't seem to paste an image here to show the layout and the results.
    Has anyone else experienced this? Anyone have any idea what I can do to fix this?
    I've opened an SR with Oracle Support, but don't expect a quick answser.
    Thanks,
    Don.

    DC,
    EUREKA!!! It works. DC, you rock. Oracle Support is still stewing about this one. I'll update my SR to let them know. It seems a silly thing, but the "biggest" change I made was changing the 'X' from a fixed-based-font to a variable-font (was courier and I changed to Times New Roman and selected a smaller font size). Although, just for insurance, I expanded the box a tad also.
    Thanks. It shouldn't be this hard, but sometimes, it is.
    ps: I'm a 'DC' also, whatever that's worth...
    Don.

  • Resolve input/output does not match

    I've used Audition for years, but I'm unable to record in the new version that I just downloaded.  I get the error message that input / output measurements to not match.  I've been in and out of preferences and made changes to no avail.   Thank you for your help.

    We need a few more details of your system. Are you on a PC or a Mac? What operating system are you using? And what audio interface?
    Since you say that you have used Audition for years I assume that this means on a PC. In which case it is probably Windows that is giving you the run around with setting up the soundcard correctly for Audition. This FAQ may be of help.
    http://forums.adobe.com/thread/973133?tstart=0

  • Output Does Not MATCH Word Document

    Everything is fine till it reaches page 76 (of my 388 page document) and the phrase: District of Columbia.
    The original document does not wrap District of Columbia, but the PDF file does.
    I am using the PDF printer.
    The problem is that District of Columbia is a bookmark linked to the table of contents. I see that during creation of the PDF file, Word goes into a mode that shows hidden text in bookmarks, etc. This makes the phase District of Columbia even longer than it normally is.
    A work around I am considering is choosing an oversized page for printing, but the names are criptic and I'll have to look up each to find out which would work. I'm very stuck. I have three other programs that can make a PDF out of the document in just minutes, but the links/bookmarks don't work at all.
    Creation using Acrobat (v XI) takes six hours. There are that many bookmarks in the document.
    Any suggestions?

    My guess is that you are looking at the DOC file with a laser printer or any other printer attached in the print menu. WORD reflows documents to be consistent with the attached printer. You are probably lucky that you made it through 75 pages before there was a problem. The 6 hours is also unreasonably long for the processing of 388 pages, unless everyone might have been a graphic. But even then, that is a huge amount of time.
    You are probably using PDF Maker (create PDF menu), but you should still attach the Adobe PDF printer and go through the document before printing or using PDF Maker. Also, go through the preferences in the create PDF menu to select only those things needed. Tags are good for recreating the DOC file (but it is better to not get rid of the DOC file in the first place). The other use for tags is accessibility -- that is often needed, but you might want to try turning it off to see the results.
    So, bottom line is to attach the Adobe PDF printer in the print menu and then go through the DOC file to check for the format you are concerned about and see if that duplicates what you are currently getting on p. 76. If it is the same, then you are seeing a standard process by WORD.

  • Numbering in printed output does not match that in source after about 500 pages (RH 7)

    Hi There,
    I have just upgraded to RoboHelp 7 and have created a new
    word template. As with the HTML source I work with, this template
    has a numbered style called "step" which has nothing much special
    about it.
    I just published a word doc (*.doc) and noticed that - at
    around pg 500 in the output doc - the numbering stops matching that
    in the source document: each topic in the source doc starts at 1,
    but after a cut-off point in the printed document each numbered
    step starts to continue the preceding list (so if one topic ends
    with numbered step 15, the next begins with numbered step 16).
    I have compared the source files for topics that are "as
    expected" and "not" and I cannot see any difference between the
    HTML therein.
    Has anyone else seen this / is there any known solution?
    Thanks,
    Chrissy

    I can make the numbering correct throughout by selecting to
    output not as a single document, but as separate chapters compiled
    into a single master document.
    This is not ideal, but is a satisfactory work-around. If
    anyone knows any better solution, please reply!

  • Printer output does not match Print Preview

    I'm just starting out with this and did a layout of some photos I took with captions. Using File>Print and then clicking "Preview in the resulting dialogue box shows that everything fits on the sheet of paper. HOWEVER, after printing the page, the bottom is cut off. What is the problem? The printer is an HP DeskJet 5150. As a work-around I've started doing the layouts as if the paper is 8" x 10".
    Also, what does the "Soft Proof" check box do in the Print Preview window?

    OK romad, the memory problem isn't the Macs but it could be the printers. I have seen this many years ago.
    You could also create a test page with one long line from top to bottom and print it. Does the problem still show?
    Does it happen if you print a full page photo from i.e. iPhoto directly.
    Do you still have AW on this machine? can you paste the content of your problem page into an AW page and print? What is the result?
    Somehow we need to do tests to pin down from where the problem is emanating from.
    I agree that AW does have a lot that isn't implemented in iWorks, but there are other features that are much better in Pages.

  • Printer output does not match screen

    Photoshop CC (recently installed)
    Windows 7
    Canon i960 printer
    Samsung SyncMaster 2494 monitor
    I am having problems getting acceptable printing results.  All prints are highly magenta.
    I have tried both printer and PS color management and all the available i960 profiles.
    I have also run all the printer maintenance tests.
    The screen has been profiled with Spyder 2 Pro
    This printer has worked fine in the past with PS CS5
    I am out of ideas.  Help!

    OK romad, the memory problem isn't the Macs but it could be the printers. I have seen this many years ago.
    You could also create a test page with one long line from top to bottom and print it. Does the problem still show?
    Does it happen if you print a full page photo from i.e. iPhoto directly.
    Do you still have AW on this machine? can you paste the content of your problem page into an AW page and print? What is the result?
    Somehow we need to do tests to pin down from where the problem is emanating from.
    I agree that AW does have a lot that isn't implemented in iWorks, but there are other features that are much better in Pages.

  • Output map: Document Type does not match any of the given schemas

    On a send port, we have a map that uses a custom xslt. We were hoping to somehow design the map so the output was essentially a generic xs:any schema.  But unless we ad a reference from our map assembly to the assembly that holds the actual schema for
    the message pertaining to the map out put we get an error:
    The Messaging Engine failed while executing the outbound map for the message going to the destination URL "C:\BizTalk\Test\%MessageID%.xml"
    with the Message Type http://test#testmessage. Details:"Document type "outputtest#outputtestmessage" does not match any of the given schemas.
    Is there a way to avoid having to have the reference? 

    Hi ,
    In BizTalk messages are distinct from each other based on the message type . In your case http://test#testmessage (Namespace#RootNode)
    Now coming to your case have you verified whether you have a schema type matching the response is deployed with the solution. The easy way is to look into specific BizTalk application schema node .
    If not ,What you can do is to create a new schema for output having "TestMessage" as record and any element inside it. After that apply a mass copy
    funtiod from source t destination(in your case any type schema created).
    Thanks
    Abhishek

  • How to avoid output file and error lines when condition does not match

    Hi Experts
    A customer want to send purchase order files to several vendors and each vendor has their own requirement to content and file format. I have prepared scenarios for each vendor and a template is (conditionally) called when CardCode matches. It works fine, - PO file is generated when CardCode matches, but error lines are written to SAP B1 Control Center each time CardCode does not match the one defined in a scenario (100 or more times per day). Problem is that these error lines does not get automatic deleted. Conditional processing are made in this way:
    Result Message in SAP B1 Control Center when CardCode does not match:
    I tried to avoid an error line in SAP B1 Control Center when CardCode does not match in this way:
    Then no error lines are written to SAP B1 Control Center, but an output file is generated each time (order file when CardCode matches and an empty file when CardCode does not match).
    Any suggestions on how to avoid both errors types (error lines in SAP B1 Control Center and empty output files)?
    Or - can lines in SAP B1 Control Center be automatic deleted?
    Regards
    Steen

    Hi Steen,
    using <b1im_skip> should be the right approach, if you're working with B1 OUTBOUND.
    Following extract form the B1i help describes the usage to skip the outbound processing:
    1.1 Skipping Outbound Processing
    If you do not want to hand over the message to the receiver system, the scenario step can create a special tag that indicates to generic processing in the integration framework to skip the message processing.
    Add the following to the final transformation atom (atom0):
    <b1im_skip xmlns= ”” info=”my info” msglog=”true” msgout="yes">
    If the integration framework skips the message, it puts the message log information to the Filtered section, if the message log is switched on. The result message contains the Message skipped by vBIU logic information.
    info
    To display an individual message, define it using the info attribute.
    msglog
    If you want to avoid an entry in the message log, introduce the msglog attribute and set it to false.
    msgout
    To display the skip information in the Success section of the message log, use the msgout attribute and set it to yes.
    In case you don't want any MsgLogEntry in case of a skipped message, please enter the following in final atom0:
    <xsl:template name="transform">
    <xsl:attribute name="pltype">xml</xsl:attribute>
    <xsl:choose>
    <xsl:when test="$msg/BOM/BO/Documents/row/CardCode=&apos;C20000&apos;">
    <xsl:call-template name="transform2"/>
    </xsl:when>
    <xsl:otherwise>
    <b1im_skip info="skipped" msglog="false"/>
    </xsl:otherwise>
    </xsl:choose>
    </xsl:template>
    Best regards
    Bastian

  • Structure Index Member structure imput does not match Input Splitter output

    I am running into a problem with Tiger's Quartx Composer where a structure output from an Input Splitter does not match the structure input to the Structure Index Member it is directly connected to. The input to the Structure Index Member displays an unchanging value structure when a changing value structure is passed to it. The same result occurs if the inputted structure in received via publish by passing the Input Splitter. Does anyone know what would cause this to happen?

    Hi Frank,
    Sorry, I have absolutely no idea what you're dealing with, but have you done any OS Maintenance lately, like clearing Caches?
    At this point I think you should get Applejack...
    http://www.versiontracker.com/dyn/moreinfo/macosx/19596
    After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
    applejack AUTO
    Then let it do all 5 of it's things.
    At least it'll eliminate some questions if it doesn't fix it.
    The 5 things it does are...
    Correct any Disk problems.
    Repair Permissions.
    Clear out Cache Files.
    Repair/check several plist files.
    Dump the VM files for a fresh start.
    First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files!
    Disconnect the USB cable from any UPS so the system doesn't shut down in the middle of the process.

  • Cropping preview does not match output, constrained sizes.

    I have two separate problems with the Crop tool. The first is that the crop preview does not match the what shows up after I exit crop mode.
    Screen shot of to the preview: tinyurl.com/o9qxcy
    After hitting "done": tinyurl.com/prtsrw
    What is really strange is that I can work around this by expanding the crop size to almost the full size (less ~1 pixel off the bottom) and iMovie crops to the width of the original clip. If I expand it to full size of the preview area the crop still slices to the width, but it is then centered.
    The second problem is that cropping will not let me expand the crop beyond a certain size. I have no work-around for this.
    Screenshot of the max size I can select with the crop tool: tinyurl.com/pjqjno
    Both of these happen both the project area and the clips drawer.

    Bump.

  • Color does not match printing in preview

    Printing a photo directly from iPhoto ('08) does not match the color on screen. Using an Epson 2200.
    The colors are dark and saturated. Maybe the problem is setting color management in the advanced dialog box- I have it set to: "No Color Adjustment" as per Epson.
    Is there a setting that is recommended? I can't find any help in help.
    I'm well aware of color management problems printing via Photoshop with the Epson printer.

    Hi McJPP,
    You're using one of the built in color setups for Photoshop, so no big deal there. Since you have your monitor properly calibrated and profiled, ColorSync shouldn't be having an issue handling the difference between the image's color space and your monitor's. Questions though. Is the image RGB? Does it have an embedded profile? If so, is it Adobe RGB 1998? I'm assuming that it does since that's your working RGB color space in Photoshop.
    The grab on the left is the preview copy using:
    By preview, do you mean the Preview button on the print dialogue box at the bottom left next the the PDF button? I'm guessing yes since I can produce the same kind of result. It's a bit hard to explain, but I'll try.
    I took a simple grayscale image and made it RGB. I then did the same thing you did. Left image is Photoshop handling color for an Epson Stylus Pro 4000, using a profile I made for a DuPont paper. Then clicking the Preview button when the print dialogue comes up. Right image is letting the printer handle color and clicking Preview. The result is below.
    Believe it or not, there's nothing wrong. Photoshop (more accurately, ColorSync) is showing you what it had to do to the pixel color values to adjust for how the inks perform on the chosen paper. The end result, with proper profiles, is that the printed image looks like what you see in Photoshop regardless of how it shows in Preview mode. The Epson driver doesn't make this visible cue even though you've turned ColorSync on there, so it simply shows you the same thing you see in Photoshop, even though it's making the same adjustment to the pixel color values.
    You should get essentially the same final output no matter which way you print the image.

Maybe you are looking for

  • Changing the _alpha value of a movie does nothing for me

    Hi This is probably a real basic problem but it has had me tearing my hair out. I have two movies which I have moved into position programatically and now I wish to alter the _alpha value of them. Putting a trace on the fadeMovie function shows that

  • Which movement type to show Directly Procured material in stock?

    Hi All Is there another movement type that I can use to reverse from a network, Directly Procured material in to stock? Our issue is that we plan and have delivered directly procured material to out production plant (Plant A) and the PO has an accoun

  • The "A" key only registers on the first KEY_DOWN instance on no subsequent instances

    Here you go, the most primitive code in the entire world: private function init()                               trace('balls');                               stage.addEventListener(KeyboardEvent.KEY_DOWN, kDown);                               stage.a

  • Regarding logical and virtual

    Hello, can any one tell me the differences between logical and virtual.

  • Combining files by drag and drop not working

    running acrobat  XI on XP ... Hp pc/ laptops when you try to drag a pdf attachment from gmail and try to drop it to combine with others it's no longer allowed    (circle w/ a line thru it -displayed) - this option was working  previoulsy