PDF preview and display issue : NWDS CE 7.1 SP05+ALD 7.1

Hi All
I am creating a webdynpro java application in NWDS 7.1 SP 05. This application has an interactive form ui element. The livecycle designer version is 7.1 and reader versions tried are 8 and 9.
The issue is that the pdf preview in NWDS is blank and also I am getting blank white space instead of the form when i deploy the application on a browser.
I have used NWDS 7.1, SP05 + ALD 7.1 combination on another system and there i can see the form in NWDS pdf preview.
I am completely stuck, please let me know of any way out.
Thanks
Lisha

Hi,
Try to uninstall adobe life cycle designer and install it onceagain..
Even we faced some times this problem, but better to use higher version of adobe life cycle designer like 8.0 whiuch will be compatible to your NWDS version...
Hope this helps you in resolving the problem...
Regards,
Saleem

Similar Messages

  • PDF preview and display issue : NWDS 7.1 SP05 + ALD 7.1

    Hi All
    I am creating a webdynpro java application in NWDS 7.1 SP 05. This application has an interactive form ui element. The livecycle designer version is 7.1 and reader versions tried are 8 and 9.
    The issue is that the pdf preview in NWDS is blank and also I am getting blank white space instead of the form when i deploy the application on a browser.
    I have used NWDS 7.1, SP05 + ALD 7.1 combination on another system and there i can see the form in NWDS pdf preview.
    I am completely stuck, please let me know of any way out.
    Thanks
    Lisha

    I can't give a specific response, but if possible, upgrade to LCD 8.0 - it is much smoother to use than 7.1.
    I almost pulled out all my hair working with 7.1

  • PDF display and preview issue : NWDS 7.1 SP 05 + ALD 7.1

    Hi All
    I am creating a webdynpro java application in NWDS 7.1 SP 05. This application has an interactive form ui element. The livecycle designer version is 7.1 and reader versions tried are 8 and 9.
    The issue is that the pdf preview in NWDS is blank and also I am getting blank white space instead of the form when i deploy the application on a browser.
    I have used NWDS 7.1, SP05 + ALD 7.1 combination on another system and there i can see the form in NWDS pdf preview.
    I am completely stuck, please let me know of any way out.
    Thanks
    Lisha

    I can't give a specific response, but if possible, upgrade to LCD 8.0 - it is much smoother to use than 7.1.
    I almost pulled out all my hair working with 7.1

  • MacBook Pro Startup and Display Issues

    I've been having some random problems with my MacBook Pro (2.16 GHz, 2 GB RAM, 100 GB 7200 rpm hard drive, ATI Radeon X1600 graphics). Specifically:
    1. Lines across the screen and purple boxes sometimes appear.
    2. The graphic effects (e.g. zooming a window) sometimes get "frozen" on the screen. In other words a remnant from the animation will stay until the window is refreshed.
    3. The Mac sometimes freezes during the startup process. Sometimes the login screen will be unresponsive and other times the Mac will almost bootup but fail when loading startup items.
    4. Less frequently the Mac will freeze randomly. I previously had iStat Menus installed and each time the MacBook Pro froze up it indicated both read and write disk activities.
    Yesterday I decided to wipe the machine clean and start from scratch in case there were a software issue or corruption on the hard drive that was causing my woes. I completely erased my hard drive and even zeroed the entire disk to make sure everything was completely wiped out. I also disconnected all peripherals to simplify things as much as possible.
    The first time I tried the reinstall everything completed successfully but the "Welcome" movie froze part way through. I then had problems running the install again. I was able to boot off the Leopard DVD, but the machine froze a couple of clicks into the install procedure. After numerous tries I was able to erase the hard drive once again and install Leopard. This completed successfully and I installed all updates.
    The problems started to show up again almost immediately, however. I installed iLife and iWork and all the updates and had the computer freeze up on me again during a reboot. I also noticed that the display issues started to show up again even before installing any third-party software.
    I've tried running disk tests with Drive Genius 2.1, but no errors have been reported. I've also used the freeware Rember program to run memory tests but have yet to see any errors. Sometimes my Mac powers up without any problems and once it's powered up it often stays running for days. The display issues appear quite frequently. I've using iStat Menus to keep an eye on the temperature sensors and everything appears to be normal - so it doesn't appear to be temperature related.
    Fortunately the computer's still covered under the extended AppleCare warranty, but I would like to have some idea what's going on before I take it in just in case they're not able to reproduce the issues.
    Any suggestions and insights would be GREATLY appreciated. Thanks in advance for reading my rather long-winded message.
    Cheers,
    Tim

    I took my MacBook Pro in for repair and it turned out to be an issue with the logic board. I had the logic board replaced (fortunately it was covered under my extended AppleCare warranty) and these problems are a thing of the past.

  • Captivate 4 previewing and publishing issues

    I downloaded and installed Captivate 4 on my computer. I'm a
    current user of Captivate 3. I imported one of my projects into
    Captivate 4, but when I try to Preview or Publish the project
    nothing happens.
    When I published the project to HTML, it only created the
    "standard.js", "ProjectName.htm" and "ProjectName.swf". I'm
    wondering if anyone else has ran into this issue with Captivate 4
    and how I can fix it.
    BTW, I just checked, and this only happens with the project
    that was created using Captivate 3.
    Thanks in advance,
    Ricardo

    _toll wrote:
     Had the same problem on coverting from cp3 to 4, getting the "Exception EConvertError in module converter.dll at 0000BBF3".
    I had 8 files to convert. 4 worked fine and 4 did not, ie got the error msg above. 1 of those that didnt work did convert after retrying the process several times. As for the others this is what i did:
    1. launch the cp3 file in cp4
    2. when asked to save as new version do so, as a new name obv
    3. cp4 will then ATTEMPT to convert the file and you will soon see the Application Error
    4. close cp4 and launch the file you created in step 2
    5. now cp4 will launch and coninue the process it ATTEMPTED in step 3, you will again be asked to convert the file. do so again. this time however it should FINISH the process for you.
    6. cuss under your breath that cp4 should have done this for you in first place and you have lost hours of work.
    7. then cuss again that cp4 doesnt have the drag and drop question type that includes option for images.
    8. but then praise cp4 that it does however have the right-click functionality.
    hope it works for you :-)
    @_toll you are a genius. I've lost 5 hours worth of work trying to resolve the same issue. One more note to add to your instructions is that I found that (step 2) the message asking you to "Save As" pops up behind the Cp4 screen. So if you are stuck in "Reading Project" mode check to see if there is a pop-up message behind.
    Uuuuuggggghhhh, Adobe why are you so hard to get along with?!?!

  • Preview and .dng issues

    I've just converted ~1000 .crw files (from a Canon S45) to dng (using DNG Converter) and Preview posts an error when I try opening a converted dng:
    "Couldn’t open the file. It may be corrupt or a file format that Preview doesn’t recognize."
    In contrast Photoshop and iView Media Pro opens these converted DNG's without issue.
    IS this a problem with Preview.app or the converted DNG files? I thought DNG was supposed to solve issues like this...
    PowerMac G4 Dual 500   Mac OS X (10.4)  

    Thanks Terence for the replies. I've searched and read and can find no evidence that QT would ever be able to open a RAW file. In fact, when Apple releases support for new RAW files they update the OS, not the QT frameworks.
    Then the answer is, if it's openable with QT, then it is. If QT cannot open it, then Preview can't.
    I just tested this with my CR2 files--which come from a Canon 350D (Digital Rebel). QT can not open the CR2 file but Preview can.
    I read on another board that the CRW files from my Canon S45 dont conform to some specification. I would assume the result of non-conformance means that these files cant be translated to DNG (and opened in Preview).
    Of course if anyone else has any ideas I'd appreciate your input

  • CCP 2.6 Javascript error and display issues

    Hello ,
    I am atttempting to run CCP2.6 and have tried clearing cache on IE (temp internet/website files, cookies, history) and removed all Java files including trace/log files, chaced apps and applets , and installed apps and applets.Also ran CCP as admin. Essentially followed all guidelines to solution to discussion "CCP 2.5 Javascript Error" but has not resolved issue.
    I still get the error below and the bottom 2/3 of the CCP screen is not displayed/rendered. Content is only rendered within a sliver of entire window size , at top part of the window. It appears as if Java should be rendering content at mid/bottom section of window but never does, although a tempory splash screen does appear as if it is "attempting".
    netscape.javascript.JSException: No such method "invokeLaunchDashboard" on JavaScript object
    at sun.plugin2.main.client.MessagePassingJSObject.newJSException(Unknown Source)
    at sun.plugin2.main.client.MessagePassingJSObject.waitForReply(Unknown Source)
    at sun.plugin2.main.client.MessagePassingJSObject.call(Unknown Source)
    at com.cisco.xdm.CounterpointSDMApplet.init(CounterpointSDMApplet.java:310)
    at com.sun.deploy.uitoolkit.impl.awt.AWTAppletAdapter.init(Unknown Source)
    at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)
    I am using
    System:
    Windows 7 SP1
    IE10
    java version "1.7.0_21"
    Flash 11.7.700.169
    Looking forward to using the application.
    Please Help!
    Thanks
    Pablo

    Hello ,
    I am atttempting to run CCP2.6 and have tried clearing cache on IE (temp internet/website files, cookies, history) and removed all Java files including trace/log files, chaced apps and applets , and installed apps and applets.Also ran CCP as admin.
    But I still get the error below and the bottom 2/3 of the CCP screen is not displayed/rendered. Content is only rendered within a sliver of entire window size , at top part of the window. It appears as if Java should be rendering content at mid/bottom section of window but never does, although a tempory splash screen does appear as if it is "attempting".
    netscape.javascript.JSException: No such method "invokeLaunchDashboard" on JavaScript object
    at sun.plugin2.main.client.MessagePassingJSObject.newJSException(Unknown Source)
    at sun.plugin2.main.client.MessagePassingJSObject.waitForReply(Unknown Source)
    at sun.plugin2.main.client.MessagePassingJSObject.call(Unknown Source)
    at com.cisco.xdm.CounterpointSDMApplet.init(CounterpointSDMApplet.java:310)
    at com.sun.deploy.uitoolkit.impl.awt.AWTAppletAdapter.init(Unknown Source)
    at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)
    I am using
    System:
    Windows 7 SP1
    IE10
    java version "1.7.0_21"
    Flash 11.7.700.169
    Looking forward to using the application.
    Please Help!
    Thanks
    Pablo

  • Previewing and sync issues

    Hi guys, I'm pretty new at using premiere so pls forgive me!
    I bought a computer for the sole purpose of creating 30 sec episode previews (for television shows) but i'm encountering some issues. When i'm looking at the footage to chose out clips, the first 20 mins app. plays fine but in the rest of it the audio and video goes out of sync! even when i take out a specific clip to use in a different sequence the clip remains out sync even when i render it out! Also when i'm previewing my 30 sec. creation the preview sticks and then catches up. I don't know if it is a case of improper settings or if i need to upgrade the hardware.
    My specs are:
    4GB of Ram
    AMD Phenom 2.4ghz Quad-Core
    256mb onboard video card
    400 gb hardrive
    Windows7 Ultimate 64-Bit
    CS3 Premiere Pro
    Any help is much appreciated!

    I'm just trying to ensure that i don't go spending money wildly and then it turns out i don't need it, you know what i mean?
    I had CS3 pro on my laptop and it never gave me that problem and my laptop specs were:
    Dual Core 1.8ghz
    160gb HD (only one)
    32mb videocard
    2ghz ram
    Win Vista 32bit
    Same footage, different computer...that's why i'm trying to figure out if it's a software/setting problem.Thanks for the help so far though.....any other thoughts?

  • Has the new Early 2013 Retina Macbook Pro still lag and display issues?

    Hello. I've never had a Mac before and I'm thinking of buying the new "early 2013" 15-inch (2.7 Ghz, 16Gb Ram, $2799) Retina Macbook Pro. I live in Argentina but I'm going to NYC in a couple of weeks and I want to get one there. The thing is, that I can not be returning it 2 or 3 times like I read a lot of peple had to, because I'll be coming back home after 2 weeks and here they will only fix it, not replace it for a new one, and that could take months.
    So, I want to know if you guys can help me decide if I should go for it or not, if these image retention and burn in and ui lag issues appear to be fixed with this new model or if it is still the same. If I don't buy this one I'll be getting the new Samsung Series 7 Chronos they showed in CES 2013, still not available in the market. Thanks a lot!

    huevo_gnr wrote:
    I just checked and I have the LG SJA2, too. I didn't notice any Image retention at first, I tested it with the chessboard test for 5 or 6 minutes, it showed no IR. But with 10 minutes I can see a bit of IR. Nothing that can affect the normal use of the computer, I mean I have to put the chessboard for 10 minutes and then change to grey to notice it, but it does exist and is the SJA2 from LG. If it doesn't get worst, I think it doesn't even matter. I just hope it doesn't get worst.
    FWIW, I noticed that until I stopped looking at the chessboard before it switched; my eyes had image retention. But  in that awfully long thread on the subject, some have insisted that if it's an LG, it's trouble so I guess there's no guarantee. (BTW, I was writing this when you tried the test again - ocular image retention?)
    Not to hijack the thread, but shortly after I posted that "good news" about SJA2, my rMBP simply refused to start at all; it was totally inert. Charging, not charging, SMC reset, nothing helped. Tech support's only solution was bring it in to be fixed.
    On a hunch, and remembering something about magnets in the top of the display activating a reed switch in the base, probably near the trackpad, I lifted the front of the Mac about 1/4" inch and let it drop. Bingo! The Mac has operated properly so far. I suspect the reed switch was stuck in the wrong position, and some evidence suggests it was that way out of the box and my fix corrected it.

  • Freezing and display issue

    Dear All,
    I had this imac from 2010. Now it's creating some issues. Daily when i start this Imac, its freeze on gray screen and its also show scrambled display. But after 5 or 6 time immediate power down and on. I am able to use the operating system. It’s a very strange problem after getting heat or something it able for use. I also reset the smc and Pram reset. I don’t think its  operating system problem. Kindly suggest solution which work

    This sounds possibly graphics related and sounds as though you are experiencing kernel panics.
    Please post a copy of your latest kernel panic in your reply. To find the log, open Console application and look under System Diagnostic Reports. The log will start with "kernel_" and end in ".panic". Post the whole panic report in your reply.

  • GPMC Crashing and Display issues.

    Today I went to open the GPMC on my Windows 8 Desktop and after going to edit a policy we have created all the menu items were blank. I could see the icons for them, but they had no name. After trying to navigate for a few moments MMC Crashes and gives me
    this error in event viewer:
    Faulting application name: mmc.exe, version: 6.2.9200.16384, time stamp: 0x5010a074
    Faulting module name: ntdll.dll, version: 6.2.9200.16420, time stamp: 0x505aaa82
    Exception code: 0xc0150010
    Fault offset: 0x0007df5e
    Faulting process id: 0xfc8
    Faulting application start time: 0x01cdb7783eb3c748
    Faulting application path: C:\WINDOWS\SysWOW64\mmc.exe
    Faulting module path: C:\WINDOWS\SYSTEM32\ntdll.dll
    Report Id: 8bacb439-236b-11e2-be6b-984be1ebad9b
    Faulting package full name:
    Faulting package-relative application ID:
    with this information afterwords:
    Fault bucket -1088739078, type 1
    Event Name: APPCRASH
    Response: Not available
    Cab Id: 0
    Problem signature:
    P1: mmc.exe
    P2: 6.2.9200.16384
    P3: 5010a074
    P4: ntdll.dll
    P5: 6.2.9200.16420
    P6: 505aaa82
    P7: c0150010
    P8: 0007df5e
    P9:
    P10:
    Attached files:
    C:\Users\pomeroyt\AppData\Local\Temp\WER66CC.tmp.WERInternalMetadata.xml
    C:\Users\pomeroyt\AppData\Local\Temp\WER6C3B.tmp.appcompat.txt
    These files may be available here:
    C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppCrash_mmc.exe_636e6b2f6e27a9c7f7e820f7a0adb57213626294_05c36ce6
    Analysis symbol:
    Rechecking for solution: 0
    Report Id: 8bacb439-236b-11e2-be6b-984be1ebad9b
    Report Status: 1
    Hashed bucket: 098ebb650f3c851a055c696107776b03
    I'm not really sure where to go from here. Has anyone else had this issue? 
    Were running a 2008 domain. 

    I'm also having this problem. Error text from my system below.  It's a fresh install of Windows 8, joined to our domain and updated. VMWare Tools was installed automaticaly, but not even antivirus aside from that. It seems I can use most of the
    features of the console, I've even succesfully modified a GPO. If I select the comain in the left pane though, guarenteed crash.  I've tried rebooting.
    Anyone make any progress?
    Problem signature:
    Problem Event Name:                       
    APPCRASH
    Application Name:                            
    mmc.exe
    Application Version:                          
    6.2.9200.16496
    Application Timestamp:                    
    50ece2e8
    Fault Module Name:                         
    gpmgmt.dll
    Fault Module Version:                       
    6.2.9200.16518
    Fault Module Timestamp:                 
    510ca9a6
    Exception Code:                                 
    c0000005
    Exception Offset:                               
    0000000000154f4b
    OS Version:                                         
    6.2.9200.2.0.0.256.4
    Locale ID:                                            
    1033
    Additional Information 1:                 
    f5d5
    Additional Information 2:                 
    f5d5f2edea5447000260123656b930b4
    Additional Information 3:                 
    f883
    Additional Information 4:  f883ee6437fb5cbaf147d7c9ea29db21

  • Java and Display Issues in Plus

    Hi everyone
    Please reply whether you have or have not seen any of the following:
    I'm working on a client site where we have some machines working just fine and others are giving corbaserver errors. Copying data from a worksheet into Excel using CTRL-C | CTRL-V does not seem to work for some machines and so they have to use the Copy and Paste buttons. Curiously, when they do this they get an additional empty column whereas on the machines where CTRL-C | CTRL-V works they don't get the blank column.
    The other issue we are seeing is that after a short period of time, Plus stops running the queries automatically. Any change the user makes, such as adding a new item, adding a sort, moving a column position does not take effect until the Refresh button is clicked.
    There is a combination of IE6 and IE7, with all machines being XP with most on SP2 and many on SP3.
    I am suspicious of the XP SP3 when combined with IE7 but would like to know whether anyone else has experienced issues. We are running 10.1.2.3 with CP4 and our Java is Sun 1.6.0_15
    Please reply with either a we are having no problems with this combination or whether you have noticed similar issues. If you have seen issues and got a fix or workaround please let me know. I'm also interested in knowing which combination of Java, Discoverer, operating system and IE works for you.
    Best wishes
    Michael

    Michael,
    Our production server was recently upgraded to 10.1.2.3, CP5 with Java 1.4.2_06. Prior to this upgrade we recommended that users function with I.E. 6.0 and Firefox 2.0. We experienced issues with later browser versions. On my personal workstation I have Windows XP, SP2, I.E. 6.0, Firefox 2.0 and now Java 1.6.0_16. We are now testing the later version of Java on our test OAS. And we are testing out the later browser versions as we speak. The first thing that I would recommend is to add the Java Runtime parameter of -Xmx256M, in the Java Control Panel. I had some session locks prior to my adding this parameter. I am testing access to both servers with Java 6 installed on my workstation. Access to Java 6 performed better after I added the runtime parameters. Access to Java 4 with I.E. gives a warning message and performs very slowly. Mozilla Firefox does to seem to care, no warning and similar performance as Java 6 on the server side. I have not done very much testing with I.E. 7.0 and Firefox 3.0 as of yet with the newer Java version. I am now accessing that environment and it is running very slowly. Part of the issue may be my PC performance but I do not like what I see. Way too slow. This is the browser functionality not the workbook execution time. I added the Java Runtime parameter of
    -Xmx256M and it now performs better.
    I did the Ctrl-C|Ctrl-V with both I.E. and Firefox and did not experience the problem you discribed. I aslo did not encounter the other problems that you reported. We the corbaserver errors in a Discoverer pop-up window, Java Console or OEM session log?
    You may be correct with the SP3 as being at least one of the culprits. I do not have that patch on either workstation so I cannot test for you.
    Jerre

  • Linux installation and display issues

    PROBLEM:
    During installation, the following error occurs:
    No Java virtual machine could be found from your PATH
    environment variable. You must install a VM prior to
    running this program.
    RESOLUTION:
    Install Java 1.5 and make sure that it's in your PATH environment. To
    doublecheck that Java 1.5, simply
    type 'java -version'.
    PROBLEM:
    When opening any display view, the following error occurs and nothing shows
    up:
    ERROR GuardianApplication [main] : Registry does not exist, creating
    default registry
    Unhandled event loop exception
    Reason:
    No more handles (java.lang.UnsatisfiedLinkError:
    /<GUARDIAN_INSTALL_DIR>/configuration/
    org.eclipse.osgi/bundles/72/1/.cp/libswt-mozilla-gtk-3139.so: libstdc++.so.5:
    cannot open shared
    object file: No such file or directory)
    RESOLUTION:
    Add your browser's library dependencies by editing the /etc/ld.so.conf and
    add /<PATH>/firefox or /
    <PATH>/mozilla directory.
    Example: /usr/lib/firefox-1.5.0.7
    Make sure that the path to firefox or mozilla contains the
    /usr/lib/firefox-1.5.0.7/libxpcom.so. After
    that, run ldconfig command to update your library.
    Install compat-libstdc++-33 library. For Fedora users, simply type: "yum
    install compat-libstdc+
    +-33.i386" as root. Relaunch Guardian.

    I am really interested on comments. Anyway check also those sites about Linux on Toshiba notebooks:
    http://linux.toshiba-dme.co.jp/linux/index.htm
    http://newsletter.toshiba-tro.de/main/index.html

  • Preview and Publishing Issues

    I have the trial 2008 Xcelsius 5.0.0.99 version and have created a dashboard with 43 objects.  Everything was going great until I added 5-row, 2-column price array.  Now, when I preview or publish, I get a blank screen with an "Initializing . . ." box and it is frozen.  I can click preview again and it instantly goes back to edit mode.
    If I delete the price array out, it still will not preview.  However, if I create a new, simplier dashboard, it previews fine.
    After searching the forum, I have upgraded my Flash Player to 10.0 and upgraded my laptop memory to 2GB - which I needed to do anyway.
    Is there a fix for this?
    After reading some ov the other postings, I do not think that my dashboard is too complicated.  Please confirm.
    I would be happy to send my dashboard to you for review if it would help.

    Hi TFulton
    Looks like your using a relatively old version.  Can you patch your install to the latest version SP1, FP3 and try again?
    Regards
    Charles

  • Multiple rows of data and display issues with  FormsCentral

    I am working with an imported PDF file that has several rows of information (about 30 sets of fields for clients to enter their login information for each of their users).  Currently when I review it in the View Responses window, it strings the data all in one long line (when I export it, it does the sme thing).  Is there any way for me to get a response view that has a list of answers grouped like it appears on the form rather than one long string?  It is not very user friendly to have to send an exported PDF file that is 23 pages long, for one line of information.  I am hoping I am just missing something - help!

    That worked to get me the view on the screen, thanks.  However, when i try to export that to get the responses to the team who needs them the information overlaps.  So on the exported PDF column A is very wide, and next to it I see the information that appears in column C, (column B has disappeared).  Is there a setting to adjust that before I export? 

Maybe you are looking for