PDF's with stripes

Good afternoon all,
I am having a problem when printing a .pdf from Autodesk Inventor 2008. Actually, we have been having this problem for a while, it happened when we were using Inventor 11, as well. When you try to print a color drawing from Inventor, it ends up with stripes. It does not do this for black and white prints, only color. Any help will be greatly appreciated.
If you tell me how to attach a file, I will provide an example.
Thanks for your time,
AT
I am running Windows XP Professional X64 Edition, but we have this problem throughout my department. Most others are running standard Windows XP.

FINALLY! We figured this out just today. We are using XP with AutoDesk Inventor. It was happening when creating pdf's from inventor and also when printing a pdf to a pdf (greyscale) for prepress quality. Anyway, change the setting from standard quality to high quality in the advanced printing options. This should do the trick

Similar Messages

Windows 8 Adobe Reader will not fully open a pdf compiled with several pdf's into one - why?

Windows 8 Adobe Reader will not fully open a pdf compiled with several pdf's into one - why?

Hi Michael,
“AdbeRdr11003_en_US.exe” is the download installed on our CEO’s new Windows 8 laptop. It is a Dell XPS Re: Windows 8 Adobe Reader will not fully open a pdf compiled with several pdf's into one - why? Dell XPS 13" . It has a full install Windows 8 Professional for its’ Operating System.
I’ll attempt to attach the file in question. The file opens fine on our Windows 7, and XP computers (with the proper Adobe Reader on each).
Our CEO says there is a message that comes up saying he needs Adobe Flash. I’m attempting to find out whether or not he is trying to open it the ‘Metro’ view, or the ‘Desktop’ view – no answer yet.
If your system strips the attachment, let me know, and I’ll upload the file to an ftp site {if necessary}.
Wayne Nault
[personal info removed by moderator]

Large pdf(40MB) with 600 pages color quality is poor if i print more than 1 or 2 pages at a time.

I have a 40MB PDF file with over 600 pages of color images. If i print each page one at a time, there is no issue whatsoever with the quality, but if i print say 5 pages, the 4th and 5th page and any subsequent page will look like rubbish. In general, just not the same color quality as before. The Konica Minolta printer doesn't seem to be at fault here because like i mentioned, this problem does not occur if i print individual sheets, just if i print more than 5 or so.
Printing individual sheets in this instance, however, is not a real solution because in all the job will have many thousand pages. What do i do? Any one here experience a similar problem?

You were able to catch me whilst my Konica Minolta tech was here.
This is my take on his diagnosis,
The c353 while capable of quality output is not exactly a robust production level machine.
Without the aid of a RIP, all the processing needs to happen either in memory or it may have a hdd. Does the machine have a hard drive?
In either case, you are running out of memory.
Changing the printers properties on spooling may aid in completing the job.
He mentioned sending the job as raster. Print as Image from Acrobat's Advanced tab would do that, but I think you would cripple your computer doing such. Try it; be prepared to go out to lunch or something while it churns away.
hth

SVG in pdf created with FOP

Hello,
is it possible to include SVG`s to a pdf report, which is created with FOP?
I read something like Batik....
Does anybody have any experiences about that?
Thanks,
Tim

Thank you, CtDave, for your speedy reply and for the 'Acrobat Technical Evangelist' knowledge base article. Word 2000 is one of Microsoft's masterpieces - by disabling 'autosave', the application is totally stable, does not require 'activation' by Microsoft. Acrobat 9 enables 'saving' of interactive .pdf forms, a most valuable feature and one much appreciated by anyone completiing such forms. There must be more to this issue than 'incompatibility', because I can create a test Word 2000 document, hyperlink a valid URL, convert to .pdf with Acrobat 9, and the hyperlink works fine in Acrobat 9. When I attempt to do this using a much more complex Word 2000 document, embedded with scores of hyperlinks, these links fail to work following conversion to .pdf with Acrobat 9, but work fine following conversion to .pdf with Acrobat 6. I can then use Acrobat 9 to open the .pdf created with Acrobat 6, and successfully edit any of these fully functional hyperlinks using the 'Link tool'. I don't know who prepared the 'Acrobat Technical Evangelist' article (AF1908DCd01) - no credits were cited, and I'm far from certain that this authentically belongs to Adobe's knowledge base. So I appreciate your sharing this information with me, but I cannot say that my question has been definitively answered. If you have any further information or tips, please reply in this thread. /rmbrown

I have created a PDF form with field but for some reason I cant type in them

I have created a PDF form with field but for some reason I cant type in them

May be that the text fields are read-only.

A PDF document with links to other PDFs corrupts the URL and get 404. Works in IE.

One of our supplier sites has manuals online that are PDF docs with links from one to another. For example, when I click on "Tanaka" I get a PDF menu of Tanaka service manuals, etc. When I click on a section, such as "Chainsaw" I get a 404. Part of the directory structure in the URL is missing. For example when in the Tanaka PDF menu I click on Chainsaw I go to http://www.parklands.net/Resources/Tana%20CSaw%20Menu.pdf which is wrong. It should be http://www.parklands.net/Resources/Tanaka/Tana%20CSaw%20Menu.pdf, and in IE it is.
== URL of affected sites ==
http://

The linked documents will not be automatically converted to PDFs and merged
with your file, neither in Acrobat Standard nor in Acrobat Pro. You can do
it, but you'll need to do it manually by converting all the files to PDFs,
merging them and then adding the links between them.

A PDF document with information about activation for CS6 software

Here's a PDF document with information about activation for CS6 software.
I found it very useful for understanding how the system worked for activation of perpetual licenses, both in cases where the computer is and isn't connected to the Internet.

Ann, with some browsers, the PDF document will download in the background rather than appear in a browser window.

Word 2000 hyperlinks don't work in .pdf created with Acrobat 9 Pro

I'm new to Adobe Forums, so please overlook the effrontery of my posting a query previously discussed. Perhaps someone can simply reply with a link to the prior discussion. I have installed Acrobat 9.2 Pro in 2 computers, one running XP64 Pro, the other XP32 Pro. Word 2000 is installed in both. All Word hyperlinks work fine, but after .pdf conversion using Acrobat 9.2 Pro, none of these work. In 'Preferences', I have navigated Convert to PDF > Microsoft Office Office Word > Edit Settings > Add Links to Adobe PDF File and confirmed that the Add Links feature is enabled. Having ascertained that this glitch is not specific to either XP64 or XP32 operating systems, I uninstalled Acrobat 9.2 Pro from the XP32 computer and reinstalled Acrobat 6.1 Pro. Then using the same Word 2000 document, I converted to .pdf using Acrobat 6.1 Pro, with no problems whatsoever. This looks like a serious bug in Acrobat 9 Pro, which the telephone support folks have acknowledged. Alas, they won't give me the tiniest clue how to resolve it, nor any workaround, but merely refer me to AdobeForums.com for help. I suspect a corrective patch or 'upgrade' will be forthcoming, but meanwhile, if anyone knows of a workaround, please enlighten me. Thanks. /rmbrown

Thank you, CtDave, for your speedy reply and for the 'Acrobat Technical Evangelist' knowledge base article. Word 2000 is one of Microsoft's masterpieces - by disabling 'autosave', the application is totally stable, does not require 'activation' by Microsoft. Acrobat 9 enables 'saving' of interactive .pdf forms, a most valuable feature and one much appreciated by anyone completiing such forms. There must be more to this issue than 'incompatibility', because I can create a test Word 2000 document, hyperlink a valid URL, convert to .pdf with Acrobat 9, and the hyperlink works fine in Acrobat 9. When I attempt to do this using a much more complex Word 2000 document, embedded with scores of hyperlinks, these links fail to work following conversion to .pdf with Acrobat 9, but work fine following conversion to .pdf with Acrobat 6. I can then use Acrobat 9 to open the .pdf created with Acrobat 6, and successfully edit any of these fully functional hyperlinks using the 'Link tool'. I don't know who prepared the 'Acrobat Technical Evangelist' article (AF1908DCd01) - no credits were cited, and I'm far from certain that this authentically belongs to Adobe's knowledge base. So I appreciate your sharing this information with me, but I cannot say that my question has been definitively answered. If you have any further information or tips, please reply in this thread. /rmbrown

I have created a PDF form with multiple drop downs, all with the same drop down values. When I select a value from 1 of the drop down fields, it replicates in all of the others - which I do not want. How can I fix this?

I have created a PDF form with multiple drop downs, all with the same drop down values. When I select a value from 1 of the drop down fields, it replicates in all of the others - which I do not want. Can I fix this?

I'm fairly new to this, but I think it has to do with the way you have the drop downs named. Did you copy one then keep pasting it in each field? If so, that is the problem. You should rename each one with a different number: Dropdown1, Dropdown2, etc. I think that might solve the issue.

I cannot open a pdf file with aole-mail. I can open pdf files from windows explorer. I have associated pdf with adobe reader. My operating system is window

I cannot open a pdf file with aol e-mail. I went to preferences in Adobe Reader but did not know what to enter for Incoming IMAP and outgoing SMTP. I can open pdf files from windows explorer as I have associated .pdf files with adobe reader. My operating system is windows 7.
When I try to open the pdf file within aol e-mail I get a message: 'Your security settings do not allow this file to be downloaded'. I have not changed my security settings (Tools, Internet Options, security).

Or http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html

Extract PDF pages with it's actual page numbers...

Hi scripting gurus,
We have more than 40 of PDF documents each document contain multiple pages. Using Acrobat Professional 7.0 and 8.0 with MAC platform. We have the script to extract the pages and to suffix running numbers with the document name, please find the script below. For example CH01.pdf document total number of pages is 10, but the actual page number starts with 11. So We have to extract each pages as individual documents and the page number will followed by document name with "_" separation, (Eg: CH01_11.pdf). I have tried so many ways to include the page numbers with the document name but i can't.
/*Split pdf pages with pNum suffixed*/
var rename = /.*\/|\.pdf$/ig;
var startName = this.path.replace(rename,"");
for (var i = 1, j = 0; j < numPages; i += 1, j += 1) {
extractPages ({
nStart : j,
nEnd : j == numPages - 1 ? j : j + 0,
cPath : "/Macintosh HD/Users/Beaconpmg/Desktop/ExtractFolder/"+startName+"_"+i+".pdf"
So please can anyone look into this and help for me.
Thanks in advance.
Regards
Thiyagu

try67
First of all, replace numPages with this.numPages
Also, this doesn't make any sense:
nEnd : i == numPages - 1
I have tried what you have said above, but it is not working. Its showing the same error (missing ; before statement)in 4th line of the script.
Please find the complete code below;
// see if we need to define a global offset first file
if(global.fPageOffset == undefined) {
var global.fPageOffset = 10; // start at 10
/*Split pdf pages with pNum suffixed*/
var rename = /.*\/|\.pdf$/ig;
var startName = this.path.replace(rename,"");
for (var i = 0; i < this.numPages; i++) { this.extractPages ({ nStart : i, nEnd : i == this.numPages - 1 , cPath : "/Macintosh HD/Users/Beaconpmg/Desktop/ExtractFolder/" + startName + "_" + (i + global.PageOffset) + ".pdf" }); }
// add finished file's number of pages to global page offest
global.fPageOffest += this.numPages;
Regards
Thiyagu

Generate a new pdf report with itens on my pdf form

Hi! My name is Heitor.
I have Adobe Forms Central and Adobe Acrobat XI Pro installed on my machine.
I would like to know if its possible to make a pdf report.
Example: Clicking in a button "print" on my already open and filled pdf form, and gathering all my 30 itens (see that i am only showing 5 itens on my form. but on my form exists a "Add" button to add itens on variables) on a dropdown list and generating a new pdf report with all these itens listed.
Thanks!
Heitor Teixeira
www.heitorteixeira.com

Hi! My name is Heitor.
I have Adobe Forms Central and Adobe Acrobat XI Pro installed on my machine.
I would like to know if its possible to make a pdf report.
Example: Clicking in a button "print" on my already open and filled pdf form, and gathering all my 30 itens (see that i am only showing 5 itens on my form. but on my form exists a "Add" button to add itens on variables) on a dropdown list and generating a new pdf report with all these itens listed.
Thanks!
Heitor Teixeira
www.heitorteixeira.com

Want to Send smartform as pdf attachment with a Email to some mail id

Hi ,
I want to send a smartform as a PDF attachment with a mail to a mail id. And I can send a mail with the PDF attachment.
But I am not able to open the PDF. It is throwing some error (Adobe reader could not open u2018fileu2019 because it is either not a supported file type or because the file has been damaged (for example , it was sent as an email attachment and was not correctly decoded)).
By debugging I come to know that the file which is generating is in some encoding format.
Please help me regard this. This is very urgent.
here is the code,
Main Program :
REPORT Ztest_report.
*--Top Include for Global Data Declarations.
INCLUDE ztest_report_top.
*--Form Include for Form Routines.
INCLUDE ztest_report_form.
START-OF-SELECTION.
START-OF-SELECTION.
*--Display data
Perform display_data.
END-OF-SELECTION.
Top declaration :
Internal table
DATA : i_otfdata TYPE tsfotf,          " Smart Forms: Table OTF
        i_tline TYPE TABLE OF tline WITH HEADER LINE,
        i_receivers TYPE TABLE OF somlreci1 WITH HEADER LINE,
        i_record LIKE solisti1 OCCURS 0 WITH HEADER LINE,
Objects to send mail.
        i_objpack LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
        i_objtxt LIKE solisti1 OCCURS 0 WITH HEADER LINE,
        i_objbin LIKE solisti1 OCCURS 0 WITH HEADER LINE,
        i_reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
Work Area declarations
        w_mailaddr TYPE ppfdmailad,
        w_mailtype TYPE so_escape,
        w_mailrecipient TYPE swotobjid,
        w_control TYPE ssfctrlop,
        w_compop TYPE ssfcompop,
        w_return TYPE ssfcrescl,
        wa_doc_chng TYPE sodocchgi1,
        w_data TYPE sodocchgi1,
        wa_buffer TYPE string, "To convert from 132 to 255
        wa_objhead TYPE soli_tab,
Variables declarations
        v_form_name TYPE rs38l_fnam,
        v_len_in LIKE sood-objlen,
        v_len_out LIKE sood-objlen,
        v_len_outn TYPE i,
        v_lines_txt TYPE i,
        v_lines_bin TYPE i.
Selection Screen
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-009.
PARAMETER:      p_bukrs TYPE bukrs OBLIGATORY,            "Company Code
                p_belnr TYPE belnr_d OBLIGATORY,          "Document No
                p_gjahr TYPE gjahr OBLIGATORY,            "document type
                p_mailid(50) TYPE c OBLIGATORY.
"Mail Id
SELECTION-SCREEN END OF BLOCK blk1.
Form Logic :
FORM display_data.
*Local Variable declaration
DATA: lc_fm TYPE rs38l_fnam,       "local variable to store the
        l_i_document_output_info TYPE ssfcrespd,
        l_i_struc_job_output_info TYPE ssfcrescl,
        l_i_struc_job_output_options TYPE ssfcrescl,
        i_lines TYPE TABLE OF tline WITH HEADER LINE,
        lv_job_output_info      TYPE ssfcrescl,
        lv_document_output_info TYPE ssfcrespd,
        lv_job_output_options   TYPE ssfcresop,
        lv_bin_filesize         LIKE sood-objlen.
Determine the smartform name
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
       EXPORTING
            formname           = 'ZTEST_SMARTFORM'
       IMPORTING
            fm_name            = lc_fm
       EXCEPTIONS
            no_form            = 1
            no_function_module = 2
            OTHERS             = 3.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
w_control-getotf = 'X'.
w_control-no_dialog = 'X'.
w_control-preview = space.
w_control-device = 'MAIL'.
Call the smartform and pass the selection screen parameter
CALL FUNCTION lc_fm
       EXPORTING
            control_parameters = w_control
            output_options     = w_compop
            user_settings      = 'X'
            t_bukrs            = p_bukrs
            t_belnr            = p_belnr
            t_gjahr            = p_gjahr
       IMPORTING
            job_output_info    = l_i_struc_job_output_info
       EXCEPTIONS
            formatting_error   = 1
            internal_error     = 2
            send_error         = 3
            user_canceled      = 4
            OTHERS             = 5.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Moving the Smart Forms: Table OTF into an internal table
i_otfdata[] = l_i_struc_job_output_info-otfdata[].
CONVERT TO OTF TO PDF.
CALL FUNCTION 'CONVERT_OTF'
       EXPORTING
            format                = 'PDF'
            max_linewidth         = 132
       IMPORTING
            bin_filesize          = lv_bin_filesize
       TABLES
            otf                   = i_otfdata
            lines                 = i_lines
       EXCEPTIONS
            err_max_linewidth     = 1
            err_format            = 2
            err_conv_not_possible = 3
            err_bad_otf           = 4
            OTHERS                = 5.
IF sy-batch EQ l_c_no.
To directly view the print-preview in PDF format
CALL FUNCTION 'SSFCOMP_PDF_PREVIEW'
       EXPORTING
            i_otf                    = i_otfdata
       EXCEPTIONS
            convert_otf_to_pdf_error = 1
            cntl_error               = 2
            OTHERS                   = 3.
For Sending the PDF file to a Mail ID.
LOOP AT i_lines.
   TRANSLATE i_lines USING '~'.
   CONCATENATE wa_buffer i_lines INTO wa_buffer.
ENDLOOP.
TRANSLATE wa_buffer USING '~'.
DO.
   i_record = wa_buffer.
   APPEND i_record.
   SHIFT wa_buffer LEFT BY 255 PLACES.
   IF wa_buffer IS INITIAL.
     EXIT.
   ENDIF.
ENDDO.
DATA: BEGIN OF zlines OCCURS 0,
tline TYPE char255,
END OF zlines.
*Change the PDF format from 132 to 255.
CALL FUNCTION 'SX_TABLE_LINE_WIDTH_CHANGE'
       EXPORTING
            transfer_bin                = 'X'
       TABLES
            content_in                  = i_lines
            content_out                 = zlines
       EXCEPTIONS
            err_line_width_src_too_long = 1
            err_line_width_dst_too_long = 2
            err_conv_failed             = 3
            OTHERS                      = 4.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Attachment
REFRESH: i_reclist,
i_objtxt,
i_objbin,
i_objpack.
CLEAR wa_objhead.
i_objbin[] = zlines[].
Create Message Body Title and Description
i_objtxt = 'test with pdf-Attachment!'.
APPEND i_objtxt.
DESCRIBE TABLE i_objtxt LINES v_lines_txt.
READ TABLE i_objtxt INDEX v_lines_txt.
wa_doc_chng-obj_name = 'smartform'.
wa_doc_chng-expiry_dat = sy-datum + 10.
wa_doc_chng-obj_descr = 'smartform'.
wa_doc_chng-sensitivty = 'F'.
wa_doc_chng-doc_size = v_lines_txt * 255.
Main Text
CLEAR i_objpack-transf_bin.
i_objpack-head_start = 1.
i_objpack-head_num = 1.
i_objpack-body_start = 2.
i_objpack-body_num = v_lines_txt.
i_objpack-doc_type = 'RAW'.
APPEND i_objpack.
Attachment (pdf-Attachment)
i_objpack-transf_bin = 'X'.
i_objpack-head_start = 1.
i_objpack-head_num = 1.
i_objpack-body_start = 2.
I_OBJPACK-DOC_TYPE = 'RAW'.
DESCRIBE TABLE i_objbin LINES v_lines_bin.
READ TABLE i_objbin INDEX v_lines_bin.
i_objpack-doc_size = v_lines_bin * 255 .
i_objpack-body_num = v_lines_bin.
i_objpack-doc_type = 'PDF'.
i_objpack-obj_name = 'smart'.
i_objpack-obj_descr = 'test'.
APPEND i_objpack.
CLEAR i_reclist.
i_reclist-receiver = p_mailid.
i_reclist-rec_type = 'U'.
APPEND i_reclist.
Send new document with attachments via RFC
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
       EXPORTING
            document_data              = wa_doc_chng
            put_in_outbox              = 'X'
            commit_work                = 'X'
       TABLES
            packing_list               = i_objpack
            object_header              = wa_objhead
            contents_bin               = i_objbin
            contents_txt               = i_objtxt
            receivers                  = i_reclist
       EXCEPTIONS
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            OTHERS                     = 8.
IF sy-subrc <> 0.
    WRITE:/ 'Error When Sending the File', sy-subrc.
ELSE.
    WRITE:/ 'Mail sent'.
ENDIF.
ENDFORM.                    " display_data

hi,
i wrote a programm.for me it is working.i think it will help for u.
DATA: t_otfdata TYPE ssfcrescl,
      t_lines LIKE tline OCCURS 0 WITH HEADER LINE,
      t_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
      t_RECORD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE.
Objects to send mail.
DATA:T_OBJPACK LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
     T_OBJTXT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
     T_OBJBIN LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
     T_RECLIST LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE.
DATA: w_filesize TYPE i,
      w_bin_filesize TYPE i,
      wa_ctrlop TYPE ssfctrlop,
      wa_outopt TYPE ssfcompop,
      WA_BUFFER TYPE STRING,          "To convert from 132 to 255
      WA_OBJHEAD TYPE SOLI_TAB,
      WA_DOC_CHNG TYPE SODOCCHGI1,
      W_DATA TYPE SODOCCHGI1.
DATA: form_name TYPE rs38l_fnam,
      V_LINES_TXT TYPE I,
      V_LINES_BIN TYPE I,
      nast-spras type sy-langu value 'DE'.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
    FORMNAME                 = 'ZSR_DEMO1'
VARIANT                  = ' '
DIRECT_CALL              = ' '
IMPORTING
   FM_NAME                  = form_name
EXCEPTIONS
   NO_FORM                  = 1
   NO_FUNCTION_MODULE       = 2
   OTHERS                   = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
wa_ctrlop-LANGU = nast-spras.
wa_ctrlop-getotf = 'X'.
wa_ctrlop-no_dialog = 'X'.
wa_outopt-tdnoprev = 'X'.
CALL FUNCTION form_name
EXPORTING
ARCHIVE_INDEX              =
ARCHIVE_INDEX_TAB          =
ARCHIVE_PARAMETERS         =
   CONTROL_PARAMETERS         = wa_ctrlop
MAIL_APPL_OBJ              =
MAIL_RECIPIENT             =
MAIL_SENDER                =
   OUTPUT_OPTIONS             = wa_outopt
   USER_SETTINGS              = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO       =
   JOB_OUTPUT_INFO            = t_otfdata
JOB_OUTPUT_OPTIONS         =
EXCEPTIONS
   FORMATTING_ERROR           = 1
   INTERNAL_ERROR             = 2
   SEND_ERROR                 = 3
   USER_CANCELED              = 4
   OTHERS                     = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
t_otf[] = t_otfdata-otfdata[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
   FORMAT                      = 'PDF'
   MAX_LINEWIDTH               = 132
ARCHIVE_INDEX               = ' '
COPYNUMBER                  = 0
ASCII_BIDI_VIS2LOG          = ' '
PDF_DELETE_OTFTAB           = ' '
IMPORTING
   BIN_FILESIZE                = w_bin_filesize
BIN_FILE                    =
TABLES
    OTF                         = t_otf
    LINES                       = t_lines
EXCEPTIONS
   ERR_MAX_LINEWIDTH           = 1
   ERR_FORMAT                  = 2
   ERR_CONV_NOT_POSSIBLE       = 3
   ERR_BAD_OTF                 = 4
   OTHERS                      = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
loop at t_lines.
TRANSLATE t_lines USING '~'.
CONCATENATE WA_BUFFER T_LINES INTO WA_BUFFER.
ENDLOOP.
TRANSLATE WA_BUFFER USING '~'.
DO.
t_RECORD = WA_BUFFER.
APPEND t_RECORD.
SHIFT WA_BUFFER LEFT BY 255 PLACES.
IF WA_BUFFER IS INITIAL.
    EXIT.
ENDIF.
ENDDO.
Attachment
REFRESH: T_RECLIST,
T_OBJTXT,
T_OBJBIN,
T_OBJPACK.
CLEAR WA_OBJHEAD.
T_OBJBIN[] = T_RECORD[].
Create Message Body Title and Description
T_OBJTXT = 'test with pdf-Attachment!'.
APPEND T_OBJTXT.
DESCRIBE TABLE T_OBJTXT LINES V_LINES_TXT.
READ TABLE T_OBJTXT INDEX V_LINES_TXT.
WA_DOC_CHNG-OBJ_NAME = 'smartform'.
WA_DOC_CHNG-EXPIRY_DAT = SY-DATUM + 10.
WA_DOC_CHNG-OBJ_DESCR = 'smartform'.
WA_DOC_CHNG-SENSITIVTY = 'F'.
WA_DOC_CHNG-DOC_SIZE = V_LINES_TXT * 255.
Main Text
CLEAR T_OBJPACK-TRANSF_BIN.
T_OBJPACK-HEAD_START = 1.
T_OBJPACK-HEAD_NUM = 0.
T_OBJPACK-BODY_START = 1.
T_OBJPACK-BODY_NUM = V_LINES_TXT.
T_OBJPACK-DOC_TYPE = 'RAW'.
APPEND T_OBJPACK.
Attachment (pdf-Attachment)
T_OBJPACK-TRANSF_BIN = 'X'.
T_OBJPACK-HEAD_START = 1.
T_OBJPACK-HEAD_NUM = 0.
T_OBJPACK-BODY_START = 1.
DESCRIBE TABLE T_OBJBIN LINES V_LINES_BIN.
READ TABLE T_OBJBIN INDEX V_LINES_BIN.
T_OBJPACK-DOC_SIZE = V_LINES_BIN * 255 .
T_OBJPACK-BODY_NUM = V_LINES_BIN.
T_OBJPACK-DOC_TYPE = 'PDF'.
T_OBJPACK-OBJ_NAME = 'smart'.
T_OBJPACK-OBJ_DESCR = 'test'.
APPEND T_OBJPACK.
CLEAR T_RECLIST.
T_RECLIST-RECEIVER = 'mail id'.
T_RECLIST-REC_TYPE = 'U'.
APPEND T_RECLIST.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
    DOCUMENT_DATA              = WA_DOC_CHNG
    PUT_IN_OUTBOX              = 'X'
    COMMIT_WORK                = 'X'
TABLES
    PACKING_LIST               = T_OBJPACK
    OBJECT_HEADER              = WA_OBJHEAD
    CONTENTS_BIN               = T_OBJBIN
    CONTENTS_TXT               = T_OBJTXT
    RECEIVERS                  = T_RECLIST
EXCEPTIONS
    TOO_MANY_RECEIVERS         = 1
    DOCUMENT_NOT_SENT          = 2
    DOCUMENT_TYPE_NOT_EXIST    = 3
    OPERATION_NO_AUTHORIZATION = 4
    PARAMETER_ERROR            = 5
    X_ERROR                    = 6
    ENQUEUE_ERROR              = 7
    OTHERS                     = 8.
IF SY-SUBRC <> 0.
WRITE:/ 'Error When Sending the File', SY-SUBRC.
ELSE.
WRITE:/ 'Mail sent'.
ENDIF.
please reward me if helpful.

Writing a java program for generating .pdf file with the data of MS-Excel .

Hi all,
My object is write a java program so tht...it'll generate the .pdf file after retriving the data from MS-Excel file.
I used POI HSSF to read the data from MS-Excel and used iText to generate .pdf file:
My Program is:
* Created on Apr 13, 2005
* TODO To change the template for this generated file go to
* Window - Preferences - Java - Code Style - Code Templates
package forums;
import java.io.*;
import java.awt.Color;
import com.lowagie.text.*;
import com.lowagie.text.pdf.*;
import com.lowagie.text.Font.*;
import com.lowagie.text.pdf.MultiColumnText;
import com.lowagie.text.Phrase.*;
import net.sf.hibernate.mapping.Array;
import org.apache.poi.hssf.*;
import org.apache.poi.poifs.filesystem.*;
import org.apache.poi.hssf.usermodel.*;
import com.lowagie.text.Phrase.*;
import java.util.Iterator;
* Generates a simple 'Hello World' PDF file.
* @author blowagie
public class pdfgenerator {
     * Generates a PDF file with the text 'Hello World'
     * @param args no arguments needed here
     public static void main(String[] args) {
          System.out.println("Hello World");
          Rectangle pageSize = new Rectangle(916, 1592);
                    pageSize.setBackgroundColor(new java.awt.Color(0xFF, 0xFF, 0xDE));
          // step 1: creation of a document-object
          //Document document = new Document(pageSize);
          Document document = new Document(pageSize, 132, 164, 108, 108);
          try {
               // step 2:
               // we create a writer that listens to the document
               // and directs a PDF-stream to a file
               PdfWriter writer =PdfWriter.getInstance(document,new FileOutputStream("c:\\weeklystatus.pdf"));
               writer.setEncryption(PdfWriter.STRENGTH128BITS, "Hello", "World", PdfWriter.AllowCopy | PdfWriter.AllowPrinting);
//               step 3: we open the document
                         document.open();
               Paragraph paragraph = new Paragraph("",new Font(Font.TIMES_ROMAN, 13, Font.BOLDITALIC, new Color(0, 0, 255)));
               POIFSFileSystem pofilesystem=new POIFSFileSystem(new FileInputStream("D:\\ESM\\plans\\weekly report(31-01..04-02).xls"));
               HSSFWorkbook hbook=new HSSFWorkbook(pofilesystem);
               HSSFSheet hsheet=hbook.getSheetAt(0);//.createSheet();
               Iterator rows = hsheet.rowIterator();
                              while( rows.hasNext() ) {
                                   Phrase phrase=new Phrase();
                                   HSSFRow row = (HSSFRow) rows.next();
                                   //System.out.println( "Row #" + row.getRowNum());
                                   // Iterate over each cell in the row and print out the cell's content
                                   Iterator cells = row.cellIterator();
                                   while( cells.hasNext() ) {
                                        HSSFCell cell = (HSSFCell) cells.next();
                                        //System.out.println( "Cell #" + cell.getCellNum() );
                                        switch ( cell.getCellType() ) {
                                             case HSSFCell.CELL_TYPE_STRING:
                                             String stringcell=cell.getStringCellValue ()+" ";
                                             writer.setSpaceCharRatio(PdfWriter.NO_SPACE_CHAR_RATIO);
                                             phrase.add(stringcell);
                                        // document.add(new Phrase(string));
                                                  System.out.print( cell.getStringCellValue () );
                                                  break;
                                             case HSSFCell.CELL_TYPE_FORMULA:
                                                       String stringdate=cell.getCellFormula()+" ";
                                                       writer.setSpaceCharRatio(PdfWriter.NO_SPACE_CHAR_RATIO);
                                                       phrase.add(stringdate);
                                             System.out.print( cell.getCellFormula() );
                                                       break;
                                             case HSSFCell.CELL_TYPE_NUMERIC:
                                             String string=String.valueOf(cell.getNumericCellValue())+" ";
                                                  writer.setSpaceCharRatio(PdfWriter.NO_SPACE_CHAR_RATIO);
                                                  phrase.add(string);
                                                  System.out.print( cell.getNumericCellValue() );
                                                  break;
                                             default:
                                                  //System.out.println( "unsuported sell type" );
                                                  break;
                                   document.add(new Paragraph(phrase));
                                   document.add(new Paragraph("\n \n \n"));
               // step 4: we add a paragraph to the document
          } catch (DocumentException de) {
               System.err.println(de.getMessage());
          } catch (IOException ioe) {
               System.err.println(ioe.getMessage());
          // step 5: we close the document
          document.close();
My Input from MS-Excel file is:
     Planning and Tracking Template for Interns
     Name of the Intern     N.Kesavulu Reddy
     Project Name     Enterprise Sales and Marketing
     Description     Estimated Effort in Hrs     Planned/Replanned          Actual          Actual Effort in Hrs     Complexity     Priority     LOC written new & modified     % work completion     Status     Rework     Remarks
S.No               Start Date     End Date     Start Date     End Date
1     setup the configuration          31/01/2005     1/2/2005     31/01/2005     1/2/2005
2     Deploying an application through Tapestry, Spring, Hibernate          2/2/2005     2/2/2005     2/2/2005     2/2/2005
3     Gone through Componentization and Cxprice application          3/2/2005     3/2/2005     3/2/2005     3/2/2005
4     Attend the sessions(tapestry,spring, hibernate), QBA          4/2/2005     4/2/2005     4/2/2005     4/2/2005
     The o/p I'm gettint in .pdf file is:
Planning and Tracking Template for Interns
N.Kesavulu Reddy Name of the Intern
Enterprise Sales and Marketing Project Name
Remarks Rework Status % work completion LOC written new & modified Priority
Complexity Actual Effort in Hrs Actual Planned/Replanned Estimated Effort in Hrs Description
End Date Start Date End Date Start Date S.No
38354.0 31/01/2005 38354.0 31/01/2005 setup the configuration 1.0
38385.0 38385.0 38385.0 38385.0 Deploying an application through Tapestry, Spring, Hibernate
2.0
38413.0 38413.0 38413.0 38413.0 Gone through Componentization and Cxprice application
3.0
38444.0 38444.0 38444.0 38444.0 Attend the sessions(tapestry,spring, hibernate), QBA 4.0
                                   The issues i'm facing are:
When it is reading a row from MS-Excel it is writing to the .pdf file from last cell to first cell.( 2 cell in 1 place, 1 cell in 2 place like if the row has two cells with data as : Name of the Intern: Kesavulu Reddy then it is writing to the .pdf file as Kesavulu Reddy Name of Intern)
and the second issue is:
It is not recognizing the date format..it is recognizing the date in first row only......
Plz Tell me wht is the solution for this...
Regards
[email protected]

Don't double post your question:
http://forum.java.sun.com/thread.jspa?threadID=617605&messageID=3450899#3450899
/Kaj

Pages: create pdf documents with hyperlinks to web pdf files

Hi everybody,
I've created a pdf file with Pages, it contains a number of hyperlinks some of them work and the others don't.
The ones that works are linked to an html page, and those non working are linked to pdf documents on the net (still beginning with http:// but ending with .pdf).
I don't know ho to solve this because Pages automatically create hyperlinks and the only options available are email, pages document, web page and bookmarks.
Any suggestion?
Thx

Hi Jeff and thanks for the reply,
the links work perfectly in the pages document but one I've exported it in pdf some of them don't work anymore.
I don't see any difference in the url structure of the pdf links, they are copied ant pasted from the url box of the browser.
Here's one of the link that don't work
http://www.enpap.it/documenti/elezioni1317/NOTAI_COLLEGIO3_SUD_E_ISOLE.pdf
Could the problem has something to do with the underscores or capital letters? It would seem strange but I don't know what's going on.
Dave

PDF's with stripes

Similar Messages

Maybe you are looking for