PE 13 crashes due to incompatible video driver detected. Running on Win 7 SP1 with ATI 540v video card/driver.  Deleting bad driver file in adobe program data does not fix the problem,  it simply replaces the text file and crashes again.  My video driver

PE 13 crashes due to incompatible video driver detected. Running on Win 7 SP1 with ATI 540v video card/driver.  Deleting bad driver file in adobe program data does not fix the problem,  it simply replaces the text file and crashes again.  My video driver is just fine.  Any help out there?

rb
Your video card driver may be fine for something, but just not compatible with Premiere Elements 13/13.1.
For those with the display card error, the answers include
a. assure your video card/graphics card driver version is up to date according to the web site of the manufacturer of the card -
if necessary consider a driver roll back.
b. determine in Device Manager/Display Adapters if the computer is using 2 cards instead of 1
c. delete the BadDrivers.txt file
the rationale for that deletion is found in post 10 of the following older post...principle applies to 13 as well as 9.
Re: Premiere Elements 9 Tryout Serious Display Problem
Have you looked for computer ATI card settings that might be more compatible with Premiere Elements 13/13.1?
When is the program crashing - just opening a new project or rather crashing if editing a particular video format at the Timeline level?
ATR

Similar Messages

  • Used Migration Assistant to successfully transfer PC files to Mini. However file creation or modified date does not transfer. Date of creation is listed as day of transfer.  I would gratefully appreciate any help in solving this,

    Used Migration Assistant to successfully transfer PC files to Mini. However file creation or modified date does not transfer. Date of creation is listed as day of transfer.  I would gratefully appreciate any help in solving this?

    I have the same problem; used Migration Assistant to transfer all my pix from PC to MacbookPro, however dates of pix were not transferred. Date created as the date of transfer. Cannot sort my pix according to date.
    Anybody has an answer?

  • The authentication information provided does not match our records. Please verify your personal information and try again.

    i keep getting this error when i try to change my password.
    the authentication information provided does not match our records. please verify your personal information and try again.

    I have totally forgotten the answers to "security" questions.  Please help - I am 84 years old and somewhat lacking recall intelligence about what I might have declared earlier.
    <Personal Information Edited by Host>

  • I am trying to set up my new ipod touch and the system does not recognize my apple id.  How do I reset and start again.  I'm not sure what to do now.

    I can be reached at this email during the day [email protected]

    Try to change your Apple ID back to your old email address (http://appleid.apple.com) in order to set up and activate the phone. After the set up please sign out of iCloud and turn off "Find My iPhone" (Settings > iCloud) - do that on all your devices -, then change your Apple ID to your new address again and then add your iCloud account on you devices again.

  • Adobe Bridge CS3 - does not display thumbnails for Canon 40D or 50D RAW files

    I wanted to use Bridge to view my Canon EOS 50D RAW files and it does not display the thumbnails, just icons. I checked my 40D cr2 files and saw same thing.
    I have purged the cache and rest the cache preferences and it has not helped. I would like to be abl eto view the thumbnails of the RAW files via Bridge if possible. Jpg files and Tif files can be viewed without any issues.
    Am using Bridge version 2.1.1.9 and Pshop CS3 10.0.1

    I have the exact same problem. I can view my RAW file thumbnails (which are .ARW files from my Sony A200 camera) in the Finder and in other applications, such as Preview, but not in Adobe Bridge CS3. I know that I did try purging the cache at one point to see if that would fix it, but then I didn't know what to do after that. Before I purged the cache, I was able to view RAW thumbnails in Bridge, but then they would not increase in size when I tried using the slider (at the bottom right of the Bridge window)

  • System.IO.FileNotFoundException: The file /_catalogs/masterpage/custom.master does not exist

    Hi,
    I am facing with this problem. System.IO.FileNotFoundException: The file /_catalogs/masterpage/custom.master does not exist.
    I have reviewed in central admin. And my custom.masted is active.
    some idea?
    Patricia

    is that a custom solution you deployed ?
    look at your site collection master page gallery and verify if you have the master page .
    Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
    you see a reply being an answer to the question of the thread, click "Mark As Answer

  • I bought Numbers because my Excel files would not work with Mavericks. How can I import a non-functioning Excel file into numbers? (As of now, the file NAME transfers but data is not.) but

    I bought Numbers because my Excel files would not work with Mavericks. How can I import a non-functioning Excel file into numbers? (As of now, the file NAME transfers but data does not.)

    HI Dave,
    I'm surprised you get no message when you attempt opening the Excel document in Numbers.
    I'm assuming Numbers 3.1, since you are running Mavericks.
    Does the Numbers file that opens show any content?
    Does it contain a table?
    How large?
    Does it contain more than one tab (indicating more than one sheet)?
    Do those other tabs contain a table?
    Have you checked those tables for data content?
    There have been cases in the past of imported documents opening with white text on a white background, giving the appearance of containing nothing. Check for this by selecting a block of cells, then applying a Fill colour or a Text colour using the Format button (paintbrush).
    I'd also suggest attempting to open the Excel files using LibreOffice, which can be downloaded from the linked website.
    Regards,
    Barry

  • After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

    After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

    Ok, the issue seem to be solved. The problem was this:
    The many hundred files (raw and xmp per image) have been downloaded by ftp in no specific order. Means - a couple of files in the download queue - both raw and xmps. Most of the time, the small xmp files have been finished loading first and hence the "last change date" of these xmp files was OLDER than the "last change date" of the raw file - Lightroom then seem to ignore the existence of the xmp file and does not read it during import.(a minute is enough to run into the problem)
    By simply using the ftp client in a way that all large raw files get downloaded first followed by the xmp files, we achieved that all "last changed dates" of the xmp files are NEWER than the related raw files. (at least not older)
    And then LR is reading them and all metadata information has been set / read correctly.
    So this is solved.

  • Does not appear to be a valid i tues library file.

    I keep getting the following error message;
    The file "i Tunes library .itl" does not appear to be a valid i Tunes library file. i Tunes has attemped to recover your i Tunes library and renamed this file to "i Tunes Library (Damaged) 23.itl"
    any ideas?

    https://discussions.apple.com/thread/4406112?start=0&tstart=0
    This answered some of my questions.
    My Music Library is stored on an Optibay drive.. when i leave iTunes idle for a while, Optibay drive sleeps, corrupting the iTunes Library when it closes, i think.

  • How can i fix my itouch 4th gen when it turns on and off again ?

    it keeps on turning on and off.. when the apple logo appears after 10 seconds it will off and on

    You can try a reset; a restore to a backup; and then a restore to factory settings.  If that does not work, you will need to replace the screen.  To attempt to do it yourself, get instructions and link to screen purchase by Googling "replace ipod touch screen."  Note that if you are unsuccessful in the DIY, Apple will not do an out-of-warranty exchange for $99 ($199 for a 64gb, 4G) which is one of your other options.

  • I'm using OSX 10.7.4 how do I convert gif files to jpeg? Preview does not have a "save as" choice.

    I'm using OSX 10.7.4 how do I convert gif files to jpeg? Preview does not have a "save as" choice.

    GraphicConverter (the best shareware ever devised for the Mac) will do this for you:
    http://www.lemkesoft.com/

  • Hi. My mavericks is crashed and when i on my mac always showstha disk utility window. I do everything like repair and all but not fix this problem. I have no back up of my files. Is there any way to reinstall mavericks without erase my old data ?

    Hi. My mavericks is crashed and when i on my mac always showstha disk utility window. I do everything like repair and all but not fix this problem. I have no back up of my files. Is there any way to reinstall mavericks without erase my old data ?

    To back up your data, either use Target Disk Mode and a cable from another Mac (which mounts your problem Mac as an external disk of the other Mac) and Disk Utility on that other Mac, or — and this is all assuming you either have a slow Internet connection and don't want to use Internet Recovery, or if you have an older Mac that doesn't support Internet Recovery — you can create a bootable USB key disk on another Mac and then boot your problematic Mac from that keydisk, then use Disk Utility from the installer to make a backup to another (external) (scratch) disk.  You can also use that keydisk to reinstall OS X, to repair or to reinstall OS X.

  • My old MBP (2005) often crashes, freezes or shows grey screen at start up. Also track pad often does not work. I have re fomatted the HD and reinstalled system but to no avail. Genius bar says possible faulty HD, but suspect logic board, any ides any body

    My old 17" MBP (2005) often crashes, freezes or shows grey screen at start up. Also track pad often does not work. I have re fomatted the HD and reinstalled system but to no avail. Genius bar says possible faulty HD, but I suspect logic board. All checks out OK on the Apple Diagnostic bench. Can a Logic board go intermittant?? Any Ideas any body??

    Ive repaired 1000s of laptops over the years (translate: diagnose and replace parts).
    Its not that old, Ive owned 100s of laptops (most were free) ....some I still have are nearly 13 years old and still perfect, ....some extremely expensive ones died in under a year.
    other than becoming obsolete at some point, there isnt really any "will spoil on" data like Milk for solid state computer parts, ....alas.
    You can have a $5000 laptop die in 4 months, and a junker one keep kicking after 10 years.... Ive seen that firsthand countless times.
    Common logic dictates that "very expensive = long life" in computers,..... but all the repair people will tell you just the opposite.
    I know you have a gripe, I get that all too well honestly .

  • I was given an assingment, but have no idea where to begin. The assingment is to create a text file using notepad with all of my digital inputs and some how make those imputs show up on my digital indicators on my control pannel

    I was given an assingment, but have no idea where to begin. The assingment is to create a text file using notepad with all of my digital inputs and some how make those imputs show up on my digital indicators on my control pannel.
    When it was explained to me it didn't sound to hard of a task, I have no LabVIEW experience and the tutortial sucks.

    StevenD: FYI, I did NOT give you the one star rating. I would never do that!
    StevenD wrote:
    Ow. Someone is grumpy today.
    Well, this is an assignment, so it is probably homework.
    Why else would anyone give HIM such an assigment, after all he has no LabVIEW experience and the tutorials are too hard for him?
    This would make no sense unless all of it was just covered in class!
    This is not a free homework service with instant gratification.
    OK! Let's do it step by step. I assume you already have a VI with the digital indicators.
    "...but have no idea where to begin".
    open notepad.
    decide on a format, possibly one line per indicator.
    type the document.
    close notepad.
    open LabVIEW.
    Open the existing VI with all the indicators.
    (are you still following?)
    look at the diagram.
    Who made the program?
    Does the code make sense so far?
    Is it a statemachine or just a bunch of crisscrossed wires?
    Where do you want to add the file read?
    How should the file be read (after pressing a read button, at the start of the program ,etc.)
    See how far you get!
    Message Edited by altenbach on 06-24-2008 11:23 AM
    LabVIEW Champion . Do more with less code and in less time .

  • Recently the sound on my Iphone 4 for texts, and email alerts started working intermittently.  I have upgraded to the latest software and the Apple store even replaced the phone but safe issues

    Recently the sound on my Iphone 4 for texts, and email alerts started working intermittently.  I have upgraded to the latest software and the Apple store even replaced the phone but safe issues

    For each mail account, along with designating a primary SMTP server, you should be able to just turn off any and all other SMTP servers you have listed.  In that case, if there is a problem with comcast, the message send should just fail.
    Also make sure your comcast smtp settings are correct (port, likely 587 but might be something else for comcast, whether you should be suing SSL or not, do you need authentication or not).
    You might find the comcast forums useful for getting the settings right - I found this:
    http://forums.comcast.com/t5/E-Mail-and-Xfinity-Connect-Help/iphone-email/m-p/66 1151?view=by_date_ascending#M131151
    The second poster notes, SSL should be on, authentication should be "password" and you should be using port 995

Maybe you are looking for

  • Exception while Parsing SELECT

    I'm working with NB 5.5.1, VWP 5.5.1, MySQL 5.0.45 and J/Connect 5.0.7. When I enter following SELECT in the SQL-Editor-Window of a RowSet: SELECT DISTINCT twibu_ergebnisse.spieltag   FROM twibu_ergebnisse     WHERE     twibu_ergebnisse.saisonnr = 45

  • Dropping Temp Tables

    We are currently converting our student information system from Sybase to Oracle. My task is to convert our existing sql scripts. A number of them use temp tables and I have successfully got them to run except that I cannot drop the tables at the end

  • Error in birthday list report

    Hi Experts, I selected current  month option in standard birthday list report,but i am getting employee list for all months though i selected current month.please let me know how can i solve this. Thanks&Regards, narasimha

  • Suddenly, Firefox will not launch. When I try with the Task Manager up, it never appears on the list of applications.

    On a desktop PC running Windows XE, FF will not launch. Has been working very well since we installed FF two weeks ago and made it our default browser. IE launches normally allowing me to post this question. On my laptop, on the same wireless connect

  • Single or composite role, which table to check ?

    Hello, I'm currently trying to find out in which AGR_* table is stored the flag that indicates whether a role is a composite or a single one. I try AGR_DEFINE but it seems that there is no flag to determine whether the role is single or composite. I