Peer-to-Peer Airplay not working with iPad (Gen. 3)

I'm in the process of testing "wireless projection" solutions. Since I have access to an iPad (gen. 3), iPad Retina, iPad Air and iPhone 5c all running iOS 8.0, with a pair of Apple TV's, Model 1469, one ATV a wired connection and one ATV no network connection at all.  Both devices were updated using Configurator to get the activation setup. 
Once activate, they were then set up in their respective locations, and the settings were verified (i.e. airplay is on, networks are connected/disconnected as required) and tested using each of the iOS devices listed above.
All 4 iOS devices could see the networked Apple TV as expected.  But the Gen 3 iPad was the only device that didn't pick up the Peer-to-peer Apple TV when testing the standalone unit.  I tried to reset the iPad, turned off and on the radios, but the device will not pick up the PTP ATV.
Has anyone else had any luck getting a Gen 3 iPad to work with the Peer-to-Peer with out a network?
According to the following KB, Use AirPlay to wirelessly stream content from your iPhone, iPad, or iPod touch, you should be able to use a 3rd gen iPad to peer to peer airplay.

iPad 3rd generation doesn't support Peer-to-Peer Airplay. Apple quietly said it was for iOS devices introduced in LATE 2012. Like for Handoff; certain devices with the latest Wi-Fi specifications can get this feature. The iPad 3 was introduced in EARLY 2012. I tried, but it didn't work. Here is what I found in the Apple TV Section.
AirPlay requires an Apple TV (2nd generation or later) with an iOS device running iOS 4.3 or later or a Mac with iTunes 10.2 or later. Some features require the latest software.
Peer-to-peer AirPlay requires a Mac (2012 or later) with OS X Yosemite or an iOS device (late 2012 or later) with iOS 8; and an Apple TV (3rd generation rev A, model A1469 or later) with Apple TV software 7.0 or later.
AirPlay Mirroring is available with iPhone 4s or later; iPad 2 or later; iPad mini; iPod touch (5th generation); and iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), MacBook Pro (Early 2011 or newer), and Mac Pro (Late 2013) with OS X Mountain Lion or later.
Dual-screen capability is available with iPhone 4s or later, iPad 2 or later, iPad mini, and iPod touch (5th generation).

Similar Messages

  • Polarioid pogo printer not working with ipad and iphone

    And I can not believe how that truly *****... I am traveling through the states and bought the pogo to print on the road... Only to find out that it does not work with ipad and does not work with iphone... Unless I jailbreak my phone which I don't really want to do...
    Apple wants us to go mobile and clouding and all those things, yet, when we do go mobile and try a mobile life style, we are encountering so much technical crap that we loose the will to live...
    I could have spend the hundred dollar for the pogo to have pics printed out in every kiosk in the country...
    WWhen is Apple going to come to its senses about little life savers like the pogo and bluetooth???????
    Is anyone aware of a work around so I can print on the go? And a solution that does not involve a programmers brain because my single braincell is not working while traveling... It needs to be easy!

    To cut through all the rage and anger and "knowing" who wanted what, the Pogo has been out for a year or so, well before Mr. Jobs' passing, and Apple did not make any mention of supporting printing on anything other than Airprint compatible printers.
    Since Airprint is a Wi-Fi/ethernet thing, Polaroid would have to make a significant redesign to the Pogo.  Considering that the first iPhones only supported Bluetooth headsets and Apple didn't provide any indications about increasing Bluetooth support, Polaroid's decision for the Pogo to be Bluetooth was obviously not with iOS devices in mind.  This is why initially Polaroid had links on the FAQ to tell Apple to add Bluetooth printing support (so that in effect, asking Apple to pay for the expenses to make the iPhone compatible with the Pogo, rather than Polaroid paying to make the Pogo compatible with iOS.)
    I come from a photograpic background.  I got the Pogo as soon as it came out.  I quite literally was on Polaroid's website every day checking to see when I could order it.  Having "instant" sticker prints is wonderful at family picnics with all the kids.  While it would be great to be able to get Pogo prints from anyone's iPhone, I stopped holding my breath when Apple announced Airprint, which came well after the Pogo was released.  So I took that as the sign that it was probably never going to happen.  (I knew that the Pogo wasn't iOS compatible when I bought it so not having compatiblity is not a deal-breaker for me.  But, yes, it would be nice.)
    I now use a Polaroid Z340 since it's a 14 megapixel camera that prints larger 3x4 Zink prints.  Polaroid makes the GL10, which is basically a Pogo using the same printer as the Z340.  But it's still Bluetooth only.   So while I sympathize with the desire to have a really compact portable printer like the Pogo, iOS compatibility just does not seem to be on the horizon.  IMHO, it would be more realistic that Polaroid create an app to do Bluetooth printing.  But considering Polaroid's financial issues, I'm not holding my breath

  • Appletv remote app and airplay not working with iphone 4S

    I have the latest appleTV.  I have the remote app loaded onto my ipad3 and iphone 4S.  The app is not working with iphone 4S, nor do I get the airplay icon, hence I can't mirrior my phone on appleTV.  It used to work.  I have deleted and reloaded the app, and still nothing.  It worked fined until a month ago or so.  I have enabled home sharing.
    The app and airlplay are working just fine with the ipad3.  I have the ipad and appleTV hooked up to my router using 5Ghz, and the iphone only connects to the 2Ghz network on the same router.  I don't think this is the issue, because it worked before.
    Also, when I click on the remote app on the iphone, to add an itunes library, a code pops up on the phone, which I enter into itunes on my Win7 PC.  Nothing seems happed on the computer when I enter the code.  Could this have anything to do with recent appleTV or itunes updates?  Any possible solutions?

    It seems like I am having the same problem.
    I have the latest AppleTV 1080, imac 27", ipad, ipad2, 2 iphone 4, all with the latest iOS. After I have the AppleTV connected, a few problems showed up:
    (1) ipad plus iphones cannot airplay photo to AppleTV. After the play button and the grey screen displayed "the playing msg on AppleTV", nothing happened. it is the same for ipad/iphone.
    (2) iMac not Airplay to AppleTV
    (3) Airplay Mirroring not working
    The following are done:
    - Home sharing enabled
    - To test the devices are connected. I set a passowrd for Airplay and the ipad/iphone both requested for it so they are network and devices are ok

  • HT1145 Why is iOS 5.1 AirPlay not working with Airport Express

    Ive updated my iPad and iphone to iOS 5.1 and now AirPlay is not working with my Airport Exress set up.
    Can anyone help me out? I can't seem to resolve this and I'm an apple head

    I have the same problem from my Ipad 2 and my Iphone 4S trying to airplay to my Apple TV 2. i dont get any airplay button when playing photos or \video.
    All worked fine with IOS 5.0
    Whats going on?

  • Av adapter not working with ipad 2, please advice

    I bought an av adapter 2012 release, is not working with my ipad 3g att ios version 4.3.5 i tried reset, changing the widescreen button multiple times no luck no video mirroring or sound. When i plug there is a msg displayed: accessory not supported.
    I have 2 questions :
    1) is this a ios version ? There a lot people complaining that after updates the adapter stopped working, if it is is this version w abug?
    2) can i update the ios to 5.x not the ios 6 or i m forced to update to the last version ?

    See the following where it states the requirement of iOS 5.1 or later (in the features box)
    http://support.apple.com/kb/HT4108?viewlocale=en_US
    And yes, you should be able to update to iOS 5.1 without going directly to iOS 6. You need to locate the correct .ipsw update file for your iPad 2 and manually install it through iTunes. Google "ios ipsw 5.1.1" for links to the iOS 5.1.1 files.

  • 3.5mm jack Ear Phones not working with IPAD

    I have tried few ear phone (3.5mm jack) all working with Deskptop, Netbook, Laptop but none working with IPAD, it seems, there is a manufacturing fault in IPAD, I going abroad in 5 days, when I contact apple support on the phone, they need at least 7 working days, any suggestions. Thanks in advance.

    Double-check that you really pushed it all the way in - it's a tight fit. If that doesn't help, do as nick101 said.

  • Airplay not working with non-apple router

    I use an airport express only for playing music in a remote location. It stopped working after I switched my main wireless router from a Time Capsule to a Linksys running Tomato USB firmware.
    The Express is set up as "join a wireless network" with the correct SSID and password. The light on the Express is green and the main router status page shows it is connected, but Airplay cannot see the Express from either iTunes on my macbook or my iPhone. Also I cannot see the device in Airport Utility. When I connect the Express to my computer with ethernet, Airport Utility can see it and so can iTunes.
    I have another Express hooked to the network via ethernet and everything works fine with that one.
    Surely Airplay should work with non-apple wireless routers. Any suggestions would be appreciated.
    thanks

    Factory reset the express, and try to make it join again...

  • Airport Express A1088 Not Working With iTunes 10 AirPlay but works with iPad & iPhone

    Hi,
    I'm really hoping someone can help me. I have just got an ADSL connection at home and have started using my Airport Express I've had for years but haven't used, model number A1088. I can use the Airport Express to use AirPlay from my iPhone, iPod and iPad. iTunes 10 on my 2010 13" MacBook Pro recognises the Airport Express as an AirPlay device, however when I attempt to play music through remote speakers using the Airport Express as the AirPlay device I receive the error message "An error occurred while connecting to AirPlay device "emptyk86 Airport Express". The network connection failed". I have performed numerous hard resets and resets within the Airport Utility, to no avail. I could accept that as the Aiport Express is quite old now, that it could be broken, but as it works for all iPhones, iPods, and iPads I don't understand what I'm doing wrong!
    Thanks for your time.

    The same thing started happening to me this morning.  I have an old Airport Express, New MacBook Pro, recently updated to Lion, have the latest version of iTunes.  Everything worked fine until this morning.  I was playing music, stopped it, and when I tried to resume, got the error message. I turned evertying off and on and reset everything.  The problem persisted.  However, I had no problem playng music from my iPad library through the system using the iPad. 
    I have a remote app on the iPad and, oddly enough, found that I could play anything (playlists, songs, etc.) from the MacBook Pro iTunes library through the system using the iPad remorte app.  Once I had that running, I went back to the MacBook Pro and found I had full functionality with iTunes on the MacBook Pro.  I closed and reopened iTunes a couple of times on the MacBook Pro to test it, and found that sometimes it would work fine and sometimes I would get the error message.  When I got the error message, I went through the procedure with the iPad to get it going, and that worked most of the time.  When it did not work the first time, I found that playing a song from the iPad library first and then going to the remote app seemed to help. 
    For sure, this is more a workaround than a solution, but maybe someone who understands how these things work might recognize the problem and propose a solution.

  • Airplay not working with an ASA in the middle

    Hi All
    This is my case: In the lab I could configure mDNS on my 5508 with the global multicast and igmp snooping disabled. Only I needed was Global mDNS multicast enabled (based on Cisco Guide) and it worked fine under the following scenarios:
    All the services connected wireless
    IPAD on subnet A and Apple TV on subnet B, no Firewall in the middle. Peer to Peer Blocking in the WLC was any DROP or DISABLED and it worked fine.
    BUT, when I moved into production environment, the only way that it works is by having both Apple Devices in the same subnet with the Peer to Peer bloking DISABLED. I have a firewall ASA in the middle so I do not know what should I check in the firewall to allow Airplay to work.
    However, there is something really weird. in the IPAD, I can see the AIRPLAY icon at the bottom of the screen, when I click on it, I can see MIRRORING button and I moved it to the right to activated it BUT nothing happens on the AppleTV connected to an screen. I mean, looks like the request for MIRRORING from the IPAD to the Apple TV device is not reaching the last one. A few seconds after activating MIRRORING in the IPAD looks like the request is dropped since that the mirroring is not active.
    Is there any particular multicast configuration required in the ASA including ports (like 5353 udp)?
    I have an open case with TAC but any ideas are welcomed.
    By the way, I am running v 7.6 in the WLC in order to implement mDNS (traffic between ssid's subnet managed by the WLC - Bonjour Gateway is not neccesary)
    thanks
    Abraham

    Hi David,
    Let me share with you my findings. Apple TV requires more than 5353 port opened. Please see the following link and include in your ASA those additional ports/range. I mean, 7000, 7100, 5000 (udp/tcp), etc etc.
    http://community.arubanetworks.com/t5/Unified-Wired-Wireless-Access/apple-macbook-airplay-appletv-firewall-port-findings/td-p/55048
    After opening those ports, the service is working BUT with significant LATENCY/SLOWNESS which we are trying to solve.
    We took some packets captures on the ASA ingress/egress interfaces for both contexts (see pictures attached) and I could see many retransmissions and duplicated ACK so I tried something else that worked (see Apple TV Works attached file) BUT this is not the final solution we need so we are still working on this issue in order to check if there is something wrong with our routing/switching process in the 6500 LAN SW.
    I created static routes in the ASA contexts to communicate the IPAD to the APPLE TV (ports already opened in the ASA as indicated before) without traversing the Wireless 6500 SW (test performed on VLAN A and VLAN B) and it worked fine. However as I said, this is not the solution we want because the Wireless 6500 SW must manage inter-ASA-contexts traffic.
    In addition to that I attached another picture/diagram that shows when Apple TV service fails-latency (traffic crossing the Wireless 6500 SW for communication between ASA contexts).
    Important to say that I am NOT using MULTICAST or BROADCAST ENABLED in the WLC. I am based on mDNS as indicated in the Cisco Guide/Instructions for version 7.5 and above.
    Hope this helps.

  • Airplay not working with ipad3 but works with ipod touch 3rd gen works

    Just recieved my apple tv 3rd gen (refirbushed) got it connected to my wifi and check out a few things and was working just fine. Then I tried to use the airplay function on my ipad 3 and it started to connect then the circle spins and error message appears. After which it messes up the wifi and nothing can connect to it, not ATV, not ipad, not touch, or other 2 laptops until it is reset. Did this a couple of times same result. Finally tried different tv farther away from router, same result. Lastly I tried touch, airplay worked with multiple apps. Retried the ipad, everything broke same as before. Please Help.
    Last iOS on all.
    D-Link DIR-635 - nWireless capable
    MAC Address filtering on.
    Home Sharing on.

    Turn off the address filtering, and see what happens...
    Using AirPlay
    http://support.apple.com/kb/HT4437
    Troubleshooting AirPlay and AirPlay Mirroring
    http://support.apple.com/kb/TS4215

  • AirPlay not working with my home wifi, but is fine at work. Suggestions?

    I have a new AppleTV, fully updated with the latest updates. I also have an iPad, fully updated with the latest OS. I have done all of the required steps to login with my Apple ID, etc. Home sharing is on.
    But the ATV does not detect the iPad, and the iPad does not detect the ATV. When I play a video on iPad, the airplay logo does not even appear in the control bar. The ATV does, however, connect to the wifi no problem and download direct from itunes/netflix etc.
    To try it under different circumstances, I took the ATV and iPad to my office and set it up with an HDTV there. AirPlay worked flawlessly.
    This leads me to believe the problem must be the wifi. In terms of internet at home, I am using a Time Warner RoadRunner internet package with a Netgear N150 wireless router.
    Any suggestions?

    Not sure if this will resolve your problem but I had same problem. The airplay button would not show up on my iOS devices particularly my iPhone and I noticed the remote app was not working correctly also. For airplay and the remote app it wax a hit or miss the later being the most. The thing was my remote app usually never acted up before but than in remembered that I recently changed my router from an Apple Express to an Extreme. I had my Express set up in manual mode and I selected channel 11 manually. But when I set up the Airport Extreme I left the router in the default mode of "automatic". Upon changing the Extreme back to manual and selecting my own channel, everything has been great! So if most of you are like me and live in an Apple ecosystem and have Apple routers you may want to make sure the router is not set in automatic. I believe this to be what is causing problems.

  • Monster iezclick does not work with iPad 3

    I am trying to use monster iezclick to remote control my iPad 3.
    It does not work and volume just stop.
    It does work with old generation iPods.
    Any idea what is wrong ?

    Apple Support Communities Terms of Use
    2. Submissions
    Stay on topic. Apple Support Communities is here to help people use Apple products and technologies more effectively. Unless otherwise noted, do not add Submissions about nontechnical topics, including:
    Speculations or rumors about unannounced products.
    Discussions of Apple policies or procedures or speculation on Apple decisions.

  • Airplay not working with canon mx456

    i can not get my canon mx456 to connect to my ipad air i will work off my laptop but will not connect to the ipad can any one help or have any tips too get it working?
    thanks

    AirPrint?
    Have you tried the troubleshooting steps from the AirPrint Knowledgebase page:
    If you are unable to print, or if you see the message "No AirPrint Printers Found"
    Verify that the printer:
    Has power and is turned on. If it has power, turn the printer off and then on again to see if that resolves the issue.
    Is connected to the same Wi-Fi network as the iOS device.
    Has the latest firmware version installed.
    Has paper with enough ink or toner installed.
    Is free of any errors displayed on the printer's control panel.
    If necessary, consult the printer documentation or contact the printer vendor for help with the above steps.Notes:
    AirPrint printers connected to the USB port of the Apple AirPort Base Station or Time Capsules are not supported with AirPrint.
    Some Wi-Fi AirPrint printers can take several minutes to join a Wi-Fi network after being turned on. Ensure that the AirPrint printer is connected to the Wi-Fi network before attempting to print.

  • Wifi from iPhone hotspot not working with iPad 2

    I cannot get my iPad 2 to connect to my iPhone 4 via the personal hotspot feature. If it does connect, it does not connect to safari or mail.

    Sclifford-
    I assume you have verified that the iPhone hotspot works with another computer.
    It might help to reset the iPad's network.  Go to Settings-General-Reset-Reset Network Settings.  You will then need to reconnect the WiFi.
    Fred

  • Accessory not supported by ipad - ipad2 HDMI connector will not work with ipad (4th gen)

    I am a bit frustrated with the fact that I purchased all of the adapters/connectors for my iPad 2 back in the day -  and now all are pretty much worthless with the iPad (4th gen.)
    The iPad g4 uses the new lightning connector. OK. So, I bought the updated adapter (lightning to 30 pin). HOWEVER, it does not allow the Apple HDMI connector to work... "This accessory is not supported by iPad"
    I have to buy yet ANOTHER adapter: the Lightning Digital AV Adapter, and drop $49.00???
    RIDICULOUS!

    There are only other users here.
    Let Apple know by posting at http://www.apple.com/feedback/ipad.html

Maybe you are looking for