Percentage

Dear All,
In AW01N, when click display dep calculation button, you will get 3 main section. at the bottom section, you will see column percentage.
I would like to know how system get this percentage.
Say I have asset useful life = 12 and shift factor = 1.5.
In this case 12/1.5 = 8 year.
But the percentage shows is 0.125.
If I do 1/0.125, it is 8.
So I would like to know why system wants to show 0.125 and not 8year?
Thanks
Rgds

Hi,
If you have a straight line depreciation key like e.g. LINR and depreciate over 8 years, then the value per year is calculated in below example like this:
Useful life: 8 years
APC = 8000 USD
Depr = 1000 USD per year (which is APC 8000 / 8 years useful life)
In Percentage the 1000 USD depreciation per year represent 12.5% of the APC value of 8000 USD.
The system calculates 8000/100%12.5%=1000 which in essence is the calculation as it is represented in the system as: 80000.125 = 1000
I hope this helps you further for better understanding.
Kind regards,
Brigitte

Similar Messages

Error while entering the Overhead percentage 0.3693 in Costing Sheet

HI,
While defining costing sheet in the system,i need to give the overhead percentage as 0.3692 as per the client requirement.but the system is giving the below error.
Input should be in the form __,___,__~.___V
Message no. 00088
Diagnosis
Your entry does not match the specified input format.
System response
The entry in this field was rejected.
Procedure
The entry must comply with the edit format. The following edit format characters have a special meaning:
"_" (underscore)
There should be an input character at this point; this should be a number for numeric fields.
"." (decimal point) (applies to numeric fields)
The decimal point occurs here (setting in the user master record).
"," (thousands separator) (applies to numeric fields)
This separator occurs (optionally) for more than three figures. Depending on the setting in the user master record, it can be a period or a comma.
"V" (applies to numeric fields)
The operational sign appears here. If used, it must by at the right margin of the field. The sign is either "-" or " "(space).
"~" (tilde) (applies to numeric fields)
As of and including this character, leading zeros must also be entered. Otherwise, this character has the same meaning as an underscore. Leading zeros need not be entered on the left of the tilde. They are not output at this position.
All other characters have their normal meanings and must be entered in the same position as in the edit format.
Thanks
Sunitha

hi Sunitha,
this error is related to Decimal Format pls check your setting in country
For 4.7C
SPRO > IMG > General Setting > Define countries in mySAPsystem
For ECC 6.0
SPRO > IMG > SAP Netweaver > General Setting > Define countries in mySAPsystem
select your countries and double click in that there is last field for Decimal Pt. format check that format and try to enter value according to that format because in error it showing 4 decimal and there you may have maintained in two decimal. also check decimal currecy setting. One more reason could be there instead of full stop you may have maintained comma in setting.
thx.
Ganu

Working with percentages in Adobe Acrobat 9 Pro

So, I have a quick question. I am new to working with forms in acrobat, and am having a hard time figuring this part out. If anyone can help me, I would greatly appreciate it!
So I have a form that I've created in acrobat 9 pro. Below I have listed "individual 1:" and then "percentage allocation". The "percentage alloctions" are the different form fields for the percentages I've created. For each form field, I limited the values to not exceed 100%. I want individuals filling in this form to be able to fill in the percentages by each of the names without the TOTAL percentage value (of all three together) going over 100%. But...the trick is, I don't have a separate "Total" form field, there's no room for one. So is there a way to make it so the total of the three equals 100% without having a "total" form field?
individaul 1: percentage allocation
Individual 2: percentage allocation1
Individual 3: percentage allocation2
Please let me know if this makes sense,

Try67,
Thank you for sending me that reference guide, that will help. This is extremely frustrating for me. Thank you for the field visible or hidden script...I did end up finding those yesterday, just didn't know how to incorporate them to become visible if the total number is less than 100.
I ended up creating another text field right next to the total, and called it "statement". I marked this field as "hidden" through the general properties option in the adobe acrobat dialog box. And , I set up default text to read, "Total value must not be less than 100%". All of this, I did through the properties dialog box.
Individual 1: 30
Individual 2: 20
Individual 3: 10
Total: 60%             "statement" text field is here.
I figured what I could do is add another "if statement" to the validation script I put in for the "Total" text field I already had (below)..don't know if that was a stupid thing to do or not, but didn't know how else to do it. And where it says getField, I added the "statement" text field (the one that is hidden), thinking it would just get that field, but it's not working, what did I do wrong?
var total = Number(getField("individual1").value) + Number(getField("individual2").value) + Number(getField("individual3").value);
if (total>100) {
    app.alert("The total of the beneficiary fields must equal 100%");
    event.rc = false;
if (total<100) {
this.getField("statement").display = display.visible;

Percentage calculation in report painter

Friends,
How do we calculate percentage in report painter. I know we can do it using a formula. But when i give the formula as ex: A/B it is giving it as Zero. Do i need to do anything else? A is a subtotal of some accounts and B is a subtotal is some accounts.
Thanks in Advance

Hi,
For decimal places
select the column
go to formatting--> columns
in decimal places put 0.00
This will give u decimals
Points if useful
Regards,
Kiran

Trying to create a formula to calculate a discounted percentage, I need Help!?!?

I am learning as I go. I have a form I am working on and I need to calculate a discount. So I created a combo box that I want to add 5 and 10% into. I want my salesman to choose one of those percentages and have it calculate the 5% or 10% discount off the subtotal and give me a dollar amount in the discount field.
5% x $100.00(subtotal) = discount amount $5.00
I am really not sure where to start with this. Hoping for some pros out there to give me the dummies version of how to.

As the export value for each of these options enter 0.05 and 0.1, resp.,
and then you'll be able to just use the drop-down field directly in a
Product calculation, together with the subtotal field, to calculate the
value of the discount.

Query help, Percentages / ratio to reports / nests

Hi
I have a query that returns data like this
D_NO POINTS COUNT_POINTS ID_COUNT
4002 L_T_69 12 282
4219 L_T_69 1 151
4228 L_T_69 18 193
4229 L_T_69 7 181
4230 L_T_69 0 197
I need to also output a column that works out a percentage of count_points and Id_count. e.g 12/282 * 100 = 4.2
I had a try with ratio to reports function but no joy for me. I think i need to add in
another nested select or something but what i was trying wasnt working.
Can anyone help.
here is the query so far
SELECT D_NO,
GROUPS.POINTS,
DECODE(GROUPS.POINTS, 'L_T_69' , L_T_69) AS COUNT_POINTS,
ID_COUNT
FROM
     (SELECT D_NO,
     Count (CASE WHEN VERBAL <= 69 THEN 1
          END) AS L_T_69,
     COUNT(ID_NUMBER) AS ID_COUNT
     FROM TBL_1
     WHERE VERBAL IS NOT NULL
     group by D_NO)
TBL_1,
( SELECT 'L_T_69' POINTS FROM DUAL )GROUPS
thank you

Not sure if this is what you're looking for but it may give you some clues:
select object_type
      ,has_a_c
      ,type_total
      ,round(100 * (has_a_c / type_total),2) ratio
from
   select object_type
         ,sum (case when instr(object_name,'C') <> 0 then 1
                    else 0
               end) has_a_c
         ,count(*) type_total
   from   all_objects
   group by object_type
OBJECT_TYPE          HAS_A_C   TYPE_TOTAL   RATIO
CONSUMER GROUP             1            2      50
EVALUATION CONTEXT         1            1     100
FUNCTION                  50          113   44.25
INDEX                      7           20      35
LIBRARY                    0            2       0
OPERATOR                   1            2      50
PACKAGE                  500         1158   43.18
PACKAGE BODY             487         1126   43.25
PROCEDURE                 54           86   62.79
SEQUENCE                  62          116   53.45
SYNONYM                 1060         2298   46.13
TABLE                    365          721   50.62
TABLE PARTITION           15           15     100
TYPE                     104          272   38.24
VIEW                     834         1896   43.99
15 rows selected.

Can HPCM calculate percentages to use in allocations as well as perform the allocations

Hi All
I have a client that is evaluating which products to purchase from the Oracle stack. Unfortunately I don't know HPCM yet so I'm not sure of its capabilities. I think they will definitely go with Hyperion Planning but they do some relatively simple allocations and I cannot decide whether or not they need HPCM. They currently have a relational / access database that is used to calculate percentages to be used to allocate costs from back office to front office. Whether they need to purchase HPCM seems to depend upon whether HPCM can calculate the percentages required for the allocation as well as perform the allocations. The options as I see it are:
1. Replace legacy system with HPCM and use HPCM to calculate percentage and apply percentages to allocate costs
2. Keep legacy system for calculating percentages, upload percentages to HPCM and use HPCM to allocate costs
3. Keep legacy system for calculating percentages, upload percentages to Essbase and use Essbase to allocate costs
4. Keep legacy system for calculating percentages and allocating costs (not ideal as will require additional system interfaces of data from and to Hyperion Planning)
I know HPCM uses Essbase, when I say Essbase above I mean Hyperion Planning. I have advised the client that they ought to avoid option 4 but I am not clear enough on what HPCM can do to advise them on which of the other options is most suitable / cost effective.
Any help would be appreciated.
Regards
Stu

Hi Stu,
the plain answer is Yes, HPCM can do such a simple task. In my private opinion, it would be a bit oversized.
I want to add an option and put my vote on this:
0. Pull in a DB connection the required data into Planning and use Planning to calculate percentage and apply percentages to allocate costs.
Regards,
Philip Hulsebosch.
www.trexco.nl
p.s. To all users, close questions which were answered. Then we do not have to open them to see if we can help = saves us time to help others.

Calculate Revenue's Percentage per Year, Month or any filter that is applied to the Dashboard in DAX using Excel PowerView.

Hello folks,
I am facing an odd issue here with a Dashboard Report in PowerView.
The task is to display, in a table, a percentage of total (revenue) by any filter that the client wants. For instance, if the client selects the year (to be short) 2013, it should display for each Customer the percentage of total as Participation field.
If the client select 2014, the data should change dinamically and the same if he selects both years.
The issue that I am facing is that it calculates correctly (showing total of 100%) for either 2013 or 2014, but when I select both it sums up and shows 200% total, altering all other lines with the same behavior.
So, basically what I need is to immitate a PARTITION BY analytic function, for instance, PARTITION BY YEAR and calculate the data over the total of the selected year only (if there are many years selected, the should be calculated over it, resulting in a
100% total).
Here is the formula that I am using in the column:
=[Valor NF]/CALCULATE(SUM([Valor NF]);ALLEXCEPT(Faturamento;Faturamento[Ano]))
Where [Valor NF] is the source column (invoyce total), Faturamento is my table (Revenue) and [Ano] is the year column, (I am calculating only by year to test)
I'd appreciate any suggestion.
Thanks in advance
MCP

Hi Nick,
Thanks for your suggestion and it worked for me I added the 'System message' web item and set the visibility to 'Hidden' .Now I am not getting any message. Thank you for both.
Thanks & Regards,
Raja

Custom Calculation Script for percentages

Hi everyone,
can someone help me, I am trying to write a script, but I face some unsatisfactory results
I upload the form so you can have a look at it:
http://cjoint.com/?BGrwV2Sq5d2
he re is the scenario:
so after selecting the different module code
the fields: Excellent, Good, Satisfactory and Unsatisfactory have different values (they have a script)
eg. if Y1H3 is selected, excellent will be at 33.33 % etc...
but then I would like that when the Grade is selcted (Grade 1, Grade 2 ....) the fields ( MarksRow1, MarksRow2 ...) take the correspondant value of the fields: Excellent, Good, Satisfactory and Unsatisfactory
I've tried to write for each of the field MarksRow1, MarksRow1 etc... the following script this but it doesn't work
(function () {
    var z = getField("Grade 1").value;
if (z === 0) {
        event.value = "";
if (z === 3) {
        event.value = getField("Excellent").value;
if (z === 4) {
        event.value = getField("Good").value;
if (z === 5) {
        event.value = getField("Satisfactory").value;
if (z === 6) {
        event.value = getField("Unsatisfactory").value;
I would like after that to work out the total in the MarksTotal field by adding the value of ( MarksRow1, MarksRow2 ...)
can you help me please?
thanks

hi George,
thank you for your interest
I've just realised that I was complety wrong in the differents tests, there is no 5 and 6 but only 0,1,2,3 and 4
and now it's working, thanks
yes for the total, basically after selecting the different grade, it will display a percentage on the marks column fields ( "MarksRow1"- "MarksRow11" )
I would like to add this percentages and display the total in the MarksTotale field
also I would like to leave this field (MarksTotal) empty if nothing has been selected
I've tried to to do this, but there is a zero when nothing has been selected and it doesn't display the % sign next the total
here is the form: http://cjoint.com/?BGstXulF9PX

Custom Calculation Script for building in a percentage increase

Hello all,
Looking for a custom calculation script that will apply a percentage increase to a default value when the value of another cell goes above certain numbers. Crude example below.
Y is the cell that the script will be applied to.
if value of cell X > 10 then value of cell Y = default value * .10 ..... for 10%
if value of cell X > 20 then value of cell Y = default value * .20...... for 20%
if value of cell X > 30 then value of cell Y = default value * .30....... for 30%
Pleaes forgive me. I know my example above is not in true Java form because I really do not know Java that well. Thanks for any help that you all may provide!

I've inserted the picture above to help. This is a sizing form for pants for a fire department that will be filled out at the department by the firefighter. The manufacturer that makes the pants passes along a 10% upcharge for anyone with a waist 44-50, a 20% upcharge for anyone with a waist 52-54, and a 30% upcharge for anyone with a waist 56-58. The $42.95 in the "Price" cell is the default price for anyone with a waist that does not meet up-charging penalties (Less than a 44 waist). What I am trying to do is if the firefighter plugs in let's say a waist of 50" the "price' cell will update to show an increase of 10%. ($47.24). If he plugs in a waist of 52" the "price" cell will update to show an increase of 20% ($51.54). If he plugs in a waist of 56" the "price" cell will update to show an increase of 30% ($55.83). I hope that makes sense. I know it can be frustrating helping someone that may not know all the ins and outs like a lot of you do so I greatly appreciate your patience and your help!

Overhead Percentage is not getting updated in KONX

Hi All,
The Overhead percentage which we maintain in KZZ2 is not getting updated in KONX table. Can anybody suggest whether the OH percentage is available in KONX table only or anyother table also? Or Is there any program which needs to be run to update the KONX table?
Regards,
Rajeswari Shankar.

Hi,
U can also check konx1 table.
Check whether overhead calculations are run. Check whether CO42(in case it Product Cost Collector), KGI2(in case of costing by order), VA44(incase of costing by salesorder) run as applicable.
Regards
Sudhakar Reddy

Attachment downloading--is there a way to track percentage of big downloads in Apple Mail 5.2? (OSX Lion)

I have a satellite internet connection and have trouble with big downloads and connectivity in Apple Mail. I've discovered the Window/Activity button to track the progress of those downloads, but all it gives me is a rolling barbershop bar that never goes anywhere. Right now I'm trying to download fifteen attachments that came with a message, and some of the files (primarily pdfs) show up in their designated folders--others have not. Is there a way to track percentage on these downloads?
Also, each of the files seems to have three progress bars rather than just one.
All files are primarily 3-4MB.
Thanks,
Melissa

The inconsistent message text view and when the text for an received message is very small is caused by the sender using HTML for message composition.
Copied from Why HTML in E-Mail is a Bad Idea.
Because it introduces accessibility problems. When you write in plain text, the receiving mail client renders the text in whatever font the reader chooses. When you format email with HTML, the sender controls the formatting. But this is a trap: You only think your message will render the same way to the viewer as it appears to the sender. In reality, the receiver can end up squinting because the font looks so tiny, or vice versa. HTML is not rendered the same way from one viewing client to the next - all guarantee of accessiblity goes out the window. This is especially problematic for visually impaired persons.
The Mail.app does not include a preference setting to convert all text for received messages to RTF or Plain Text so what John provided does not apply when receiving a message that was composed in HTML.
You can do as woodie provided or with such as message open, at the menu bar go to View > Message and select Plain Text Alternative and what John provided will apply and it also applies when the sender uses RTF or Plain Text for message composition.

UK Payroll TAX percentage of a wage type

Hi,
Could you please help me will a way of find the Tax percentage deducted for a wage type. I am running UK payroll and finding a difference in Tax deduction. Your expertise will help me to identify the issue.
Please help me in this.
Kind Regards,
Suresh G

What exactly is your problem. UK tax is on a cumulative basis, and typically there are slabs with different rates, so it is difficult too work out a percentage for each wagetype.

Why isn't my battery percentage working? I click to have it on and when it's on it doesn't show up, also when I try and change my text ringtone , and soon as I back out of the sounds setting when i recheck again it's back to the original default soun

A Couple ddays ago I noticed my phone started acting wierd like the white screen with the apple picture on it popped up when I was on the phone.. All my contact names were deleted, and hours later the names popped up again. Not today I noticed something that's really ******* me off!!!!! (Lol) when I check to have battery percentage on (it's green showing its on) but it doesn't show at the top, and when I back out of the setting and go back the battery percentage is off again! Now with my text tingtone I try to change it back to how I used to have it and it just doesn't let me! I click a certain sound and back out of the settings and it's back to the defauLt !!!!! And check this out!!! The weird part is my phone randomly turned off by its self and when it came back on , I checked my photos and about 20 photos that I deleted months ago were mysteriously added back onto My phone! So can anyone help me :/ idk whats wrong woth this ps I have the 5

Hello Neygotsole,
Having your device malfunction can certainly be frustrating. After reviewing your post, it sounds as though your device is experiencing multiple issues. I have located an article that can help with software issues. Have you attempted to restore the device to factory settings without restoring from a backup? Test the issue on a new installation, and make sure that it works. Then use the same article to restore from your backup to either verify it still works, or isolate the issue to the backup itself.
How to erase your iOS device and then set it up as a new device or restore it from backups
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Help creating percentage based on totals

I've got a pretty simple report that shows vendor performance. It lists the vendor name, the po number, the amounts delivered, the expected delivery date, and the actual delivery date.
I've got a total to count the number of deliveries. I've got a total to sum the times the vendor was late. What I want to add seems pretty straight-forward - a total percentage late. So, sum(times late)/count(deliveries) = total percentage late. How do I add the total percentage late to my report?
-Tracy

Tracy, are you looking to format the result of your calculation? If this is the case, you want to right click in the column, format data, click the number tab, and adjust the properties of the result.
Also, it seems like you are trying to get a total percentage late overall. Your formula will give you the percentage late for each individual delivery. Try using the average function for the column you have calculated. This should give you the average percentage late. Hope this helps.
-Mark

In the privacy policy, it states that percentages and durations of books read are being collected to ensure that publishers can have a metered price model, prices depending on how the book was read. Give me an example of a company with such a price model?

In your privacy policy, you state that the percentages and durations of books read are being collected to ensure that publishers can choose a metered price model. Prices which depends on the duration for which the book was read.
Give me an example of a company with such a price model? Are the information being collected even where the companies have not asked for the information, even when the metered price models are not being used?
Here is an extract från the privacy policy:
What information does Adobe Digital Editions collect and how is it used?
The following information may be collected when an eBook with DRM is opened in Adobe Digital Editions software. If an eBook does not have any DRM associated with it, then no information is collected.
User GUID: The User GUID is a unique value assigned in place of your User ID and is used to authenticate you.
Device GUID: The Device GUID is a unique value generated to identify your device. It is used to ensure that the eBook may be viewed on your device and that the number of devices permitted by the license is not exceeded.
Certified App ID: This ID represents the application that is being used to view the eBook, in this case Adobe Digital Editions. It is necessary to ensure that only a certified application may display an eBook. This helps to minimize piracy and theft of eBooks.
Device IP (Internet Protocol): This identifies the country you are located in when you purchase an eBook. It is used by eBook providers for the enablement of localized pricing models. Only the country identifier of the Device IP is stored.
Duration for Which the Book was Read: This information may be collected to facilitate limited or metered pricing models entered into between eBook providers, such as publishers and distributors. These models are based on how long a reader has read an eBook. For example, you may borrow an eBook for a period of 30 days. While some publishers and distributors may charge libraries and resellers for 30 days from the date of the download, others may follow a metered pricing model and charge them for the actual time you read the eBook.
Percentage of the eBook Read: The percentage of the eBook read may be collected to allow eBook providers such as publishers to implement subscription pricing models where they charge based on the percentage of the eBook read.
Information provided by eBook providers relating to the eBook you have purchased: The following information is provided by the eBook provider to enable the delivery of the eBook to your device:Date of eBook purchase/download
Distributor ID and Adobe Content Server Operator URL
Metadata of the eBook, such as title, author, language, publisher list price, ISBN number
How is the information transmitted?
The data is sent periodically to Adobe via a secure transmission using HTTPS.
How is the information used?
Adobe uses the information collected about the eBook you have opened in Adobe Digital Editions software to ensure it is being viewed in accordance with the type of DRM license that accompanies that eBook. The type of license is determined by the eBook provider. For more information on how each piece of data is used, please see above.

In your privacy policy, you state that the percentages and durations of books read are being collected to ensure that publishers can choose a metered price model. Prices which depends on the duration for which the book was read.
Give me an example of a company with such a price model? Are the information being collected even where the companies have not asked for the information, even when the metered price models are not being used?
Here is an extract från the privacy policy:
What information does Adobe Digital Editions collect and how is it used?
The following information may be collected when an eBook with DRM is opened in Adobe Digital Editions software. If an eBook does not have any DRM associated with it, then no information is collected.
User GUID: The User GUID is a unique value assigned in place of your User ID and is used to authenticate you.
Device GUID: The Device GUID is a unique value generated to identify your device. It is used to ensure that the eBook may be viewed on your device and that the number of devices permitted by the license is not exceeded.
Certified App ID: This ID represents the application that is being used to view the eBook, in this case Adobe Digital Editions. It is necessary to ensure that only a certified application may display an eBook. This helps to minimize piracy and theft of eBooks.
Device IP (Internet Protocol): This identifies the country you are located in when you purchase an eBook. It is used by eBook providers for the enablement of localized pricing models. Only the country identifier of the Device IP is stored.
Duration for Which the Book was Read: This information may be collected to facilitate limited or metered pricing models entered into between eBook providers, such as publishers and distributors. These models are based on how long a reader has read an eBook. For example, you may borrow an eBook for a period of 30 days. While some publishers and distributors may charge libraries and resellers for 30 days from the date of the download, others may follow a metered pricing model and charge them for the actual time you read the eBook.
Percentage of the eBook Read: The percentage of the eBook read may be collected to allow eBook providers such as publishers to implement subscription pricing models where they charge based on the percentage of the eBook read.
Information provided by eBook providers relating to the eBook you have purchased: The following information is provided by the eBook provider to enable the delivery of the eBook to your device:Date of eBook purchase/download
Distributor ID and Adobe Content Server Operator URL
Metadata of the eBook, such as title, author, language, publisher list price, ISBN number
How is the information transmitted?
The data is sent periodically to Adobe via a secure transmission using HTTPS.
How is the information used?
Adobe uses the information collected about the eBook you have opened in Adobe Digital Editions software to ensure it is being viewed in accordance with the type of DRM license that accompanies that eBook. The type of license is determined by the eBook provider. For more information on how each piece of data is used, please see above.

Percentage

Similar Messages

Maybe you are looking for