Percentages Incorrect - Not accurate to decimal place

Hi Experts,
I have a report that will generate sales quantities split by company and the associated % of total sales.
The sales % displays to 2 decimal places but the % is the integer before rounding. i.e. if the % should be 6.99723% it would display 6.00%
How do I get it to round correctly to display correct % splits?
The QTY for each company is calculated via a filter on the total sales qty by company name and the % worked out by dividing the filtered column by the total column.
Please help!
Edited by: user11240727 on 10-Jun-2009 08:51

Hi
in rpd only, apply cast( measure as real).
here measure is your functionality to calculate % value.
If you are not getting then apply cast( column as real) for each column that you are using to build the % formula..
Also try this,
and again apply round( whole functionality , 6) and now in answers data format of column properties, select decimal places to 5
And what is the query BI Server is generating for this column, seee.. so that you can easily debug.

Similar Messages

  • Print Scale Percentage - Can the percentage go more than 2 decimal places??

    Hello All,
    Illustrator CS6
    I want to know if it is possible to get more than 2 decimal places in the Print Scale Percentage option box (as shown below)?
    It seems to round to 2 and I would like to get at least 3 for better accuracy.
    Any thoughts?
    Thanks
    Geoff

    Not that I know of. If you need it to be more exact, resize the artboard and scale the content. It's an arguable point, anyway, given how your printer will translate/ rasterize the stuff. Even if there were more digits, the result after the halfftoning might not at all be any different...
    Mylenium

  • Gps tracking not accurate even at places away from buildings and trees

    The big blue circle of gps is like half a kilometer wide.....it would shrink to like 70-80 ft then again widen up.....i updated my ios to the latest....gave my phone a hard reset....but nthing worked......what could be the problem here??? could it be a hardware problem?? btw its not jailbroken and its not under any warranty or aggrement...pls help

    Same problem here. My iPhone 4S was working fine until yesterday morning. I drive about 120 miles per day, and it worked on the first "leg" by the morning. When I got in the car for my way home, it didn't get any GPS signal, but when there was less than 10 miles to go it started working again. Today it didn't get any GPS signal at all. Tried a hard reset and restored from a backup, but apparently it didn't work.

  • Decimal places are not displayed in smartforms

    Hi,
      Iam having a quantity field which has length 13 and decimals 3. While debugging it has the value has decimal places but while displaying it does not have the decimal places. Only the whole number is displayed. Can anyone help how to rectify this one.Thanks...
    Thanks,
    Rose.

    Hi,
    The format of a quatity field will be based on the associated unit of measure.  Each unit of measure will have a number of decimal places (as defined in table T006 field DECAN) defined to match how the quantity is typically recorded (e.g. ST or 'each' has no decimal places as you could never have half and each).
    Regards,
    Nick

  • Decimal Places is not showing in Qty field in COPA report

    Hi,
    I have made a COPA report using one form that I have made it through TC:KE34.
    I have used ABSMG for Sales qty in my report.
    What I am observing in report, the qty is  not showing the decimal places for exmaple 6.032 MT but it gets round over to 6 MT.
    I want the system should show the 3 decimal places for the Sales Qty.
    How to do resolve this.
    Regards
    Kami

    Hi Ajay,
    No this is somthing new you mentioned. I havent tried to change the number format after executing the report.
    Please let me know how to do that. I am using Object ALV to display the report and I am not getting any option in the menus to change the number format.
    Also I noticed one thing, In other output format like drill down report its coming correctly , only in Object ALV output format its showing the rounded values.
    Please let me know the path.
    Regards
    Kami

  • Changing of decimal places from 2 to 6 digits

    Hi,
    Currently, our PO price and GR/GI quantities are being limited to two (2) decimal places only. However, we want to maintain it into six (6) digits so that we can have a more accurate PO price and GR/GI quantities in our record.
    We tried to do this in Tcode OY04 but the system issued as the following warning messages:
    1. In a productive system, you must not delete the currencies in use or change the decimal places. This could make amounts in document already posted incorrect or invalid.
    2. In the R/3 System tables currency fields are stored as decimal figures with a variable number of decimal places. The decimal point is not stored in the field in the database. Instead, each currency field refers to a currency key field. In this transaction you assign the number of decimal places to this currency key uniquely.
    Can you please explain to me the warning messages further?
    Thank you.

    Hi Jack,
          Please never try to change the decimal places in PRD system, you will be in deep deep trouble.
    Let me give one example , If the current decimal is set to 2 digit and you are going to change it 3 digit, then  USD 100.00 will become  USD 10.000 for the already posted document.
    Please not that, the decimal places are not sotred in the database, when you run a tcode to see any posted data the system queries the currency table and see the value for the decimals, if it finds 3 in OY04, it simply places the decial point afer 3 digit from right, if the decimal is set to 4m it will simple place the decimal point after 4 digit from right.
    Hope this clears your doubt.
    Best Regards
    Hari K.

  • Getting an error in CIF Inbound queue:"Only 0 decimal places are permitted for unit of measure PC"

    Hi,
    I am getting an error in CIF Inbound queue (function: CIF_ORDER_INBOUND_30A). The error text says "Only 0 decimal places are permitted for unit of measure PC".
    Can anyone point out the solution to resolve this error? It would be a big help for me as I am new to APO and so getting difficult to find a clue for it.
    Thanks.
    Regards
    Mansi

    Hi Mansi,
    Please check the cif queue you will get the order number from that order number you can find out material code. Then check the material master unit of measure in MM03 you have used some alternative unit of measure and system is unable to convert order to  alternative unit of measure because of decimal setting. If you go to CUNI and check the unit if measure PC it is not permitted for decimal places. If you need decimal than change the UoMof Material and use diff UoM or allow the decimal for PC which is not good practice.
    Regards,
    R.Brahmankar

  • Decimal places in unit of measure in Sales order

    Hi,
    In the Sales Order application in PCUI, when I create a create an order for customer XYZ, and add product ABC for qty 1 which uses unit of measure PC, the qty is displayed with 3 decimals as 1,000 whereas if I use the unit of measure EA the quantity is displayed without the 3 decimals as 1. I need the unit of measure PC to not have the decimal places like in SAPGUI.
    Could anyone help me understand how this can be achieved?
    Thank you for help in advance.
    Regards,
    Priya

    To elaborate better.
    Again, use Tcode CUNI - Unit of measurement : Initial Screen.
    At initial screen, choose TIME from the list (where by default AAAADL- no dimensions is there).
    And click on UNIT OF MEASUREMENT button.
    In that you will find MON - Month.
    There go for details by selecting MON or select MON and press F5 from Key board.
    For MON unit maintain following parameter as per your requirement:
    -Number of decimal places for number display
    Use - This parameter determines the number of decimal places with which this measurement unit is displayed.
    -Base ten exponent for floating-point display
    Use - This exponent determines how the values for this measurement unit are formatted as floating point numbers.
    Examples - If the exponent is 3, the floating point numbers have the format xxx.xxxxE3.
    And deselect commercial meas. unit in application parameters section.
    I would suggest instead of changing standard settings of MON, you create ZMON in TIME dimension.
    Thanks & Regards
    JP

  • 3 Decimal place values for Amount Key Figure

    Hi Experts,
    I have created an ODS in BI 7.0. This has a amount key figure which is getting calculated by a routine. Now The value that is getting calculated is getting stored into the ODS with only two decimal places.
    For example if the value that is gettig calculates is 0.187 by the code, the values that is getting stored is 0.19.
    This is not related to Bex display. We need to store the values 0.187 in the system and not 0.19.
    The Amount key figure that we are using is of unit 0DOC_CURRENCY . In Additional properties,  'key figure with maximum precision' check box is ticked is . We have not defined any decimal places for the BEX Display.
    Kindly help us in this matter.

    Hi Saurabh,
                  If you wish to change the decimal precision for your 0DOC_CURRENCY... you can use t.code CUNI to change the number of decimal places.  But, then this would be global effect wherein whereever this infoobject is used it would be reflected with the changes you made in CUNI.  Also check if you have authorization to change this. 
    Regards,
    Kishore

  • Changing the Decimal places in the currency

    Hi all
    we are using the currecy SAR. Decimal places was set to 4, now that they want to revert back to 2 decimal places. i understand that by doing so they would be inconsistencies in the data allready recorded. how to avoid that?
    is there any programmes / reports that would fix such inconsistencies?
    any OSS notes?
    thanks and regards
    gkk

    HI,
    You should NOT change the decimal places in a productive system.
    If you would do, the correction of the posted documents afterwards would be a remote consulting issue. Which you have to pay for SAP.
    You see, all posting you have done until now, would get displayed in a wrong way, and the new posting wouldn't compare to the others.
    Please check the note 137626 describes this.
    If you really need to change the decimals, you should create a new currency type, for example your current is SAR, and now you should create a SA2. Then you should enter new rations and exchange rates for it, and work with the new one.
    Also if you want to set the decimals to two digits from four, youshould not enter an entry in the OY04(TCURX).
    In this table you can only enter a value, that discriminate from 2 decimals. If there is no entry in the table, it means the currency has two decimals.
    Please assign points if it useful.
    Regards
    Ravinagh Boni

  • 11g Client - Inconsistencies at the 16th decimal place

    In TOAD, SQLPlus, & ODBC clients numbers returned from a query are correct (max 3 decimal places)
    In Discoverer & from a report, the numbers are off at the 16th decimal place...
    EG:
    7.081 becomes 7.0810000000000004
    7.090 becomes 7.0999999999999994 (which is exceptionally weird because the rounding doesn't work)
    7.200 becomes 7.2000000000000002
    Any idea what would cause this?
    How can I query from SQLPlus (or TOAD) to confirm whether or not those extended decimal places actually exist in the table?

    Alan3 wrote:
    Maybe I should have added this little tidbit...Please be as verbose as possible (feasible). Show queries etc. - use copy and paste.
    The particular table in question is an interface table that has been in place for 4+ years.
    The columns in question are of data type NUMBER.
    We just switched the PC that runs this interface to Win7 with an 11g client.Describe the interface. E.g. In what program language is it written?
    Now we see the extended decimals with Discoverer (on any PC) and the interface report (an old report built from developer 6) as well, but not from SQL, etc...How is changing one pc client related to the Discoverer and Reports reports? Has the database server been upgraded also? (full version from select * from v$version; )
    Do you see the same change for "old" data (from before the switch).
    I want to know if there is a setting in SQLPlus or the DB client that limits the display of the decimal places that I can alter to determine if the extended decimals actually show up... (they shouldn't be there at all)Both sqlplus and db may affect the outcome, e.g.
    SQL> desc test
    Name                                      Null?    Type
    A                                                  NUMBER
    B                                                  NUMBER(38,5)
    SQL> show numw
    numwidth 10
    SQL>
    SQL> select * from test;
             A          B
         12345      12345
    123456789  123456789
        123,45     123,45
    123,456789  123,45679
         1,234      1,234
    1,23456789    1,23457
    6 rows selected.The same values was inserted to both columns of test. With scale = 5 for its datatype, B values are rounded (4th and 6th row).
    SQL> set numw 5
    SQL> select * from test;
        A     B
    12345 12345
    123,5 123,5
    123,5 123,5
    1,234 1,234
    1,235 1,235
    6 rows selected.The numwidth setting affects sqlplus formatting.
    Edited by: orafad on Jan 5, 2011 9:44 PM

  • How to decrease decimal places in invoices

    Good day,
    How do i drecrease decimal places in invoices. For example , i have set the decimal places to 4 for costing purposes but i want the final invoice to be 2 decimal places for display purposes. i have tried decreasing the decimals using the decrease decimals icon but the decimals are still 4.
    Thanks

    Hi Wendy,
    This is System Standard that If you increased Decimal Place then you can not decrease those decimal Place again.
    If you want this then you can do this in (Print of Document) Document Layout through Crystal Report.
    Hope this help
    Regards::::
    Atul Chakraborty

  • Without to change the setting.how to set the decimal place to 7 for an UDF.

    Without to change the setting, how to set the decimal place to 7 for an UDF?

    Hi
    Once you create a UDF it will automatically be binded to the data source of data type that you gave at the time of creating UDF.
    So i think you can not set the decimal places without changing the setting in display parameters.
    i am not sure whether it will work or not one thing you can try is that create it as a alphanumeric data type and convert your decimal value to sting and then assign it to UDF,While retrieving for any manipulation you convert it as decimal.
    Hope it helps you
    Regards
    Vishnu

  • How to concetenate decimal place

    hi
    i have declared a variable as
    var_ad_addtn(16)  TYPE p  DECIMALS 10.
    now the value is coming as two decimal place i want to truncate the decimal place and only show as integer but i cannot declare like integare and the field value passed to this variable is type curr and upto two decimal place
    what i am doing is var_ad_addtn+(.0). but this is not working please let me know the syntex and statement for truncating and not display the decimal place value from a value
    eg 1232834.90 i want to show as 1232834 only
    regards
    arora

    Hi Nishant,
    Then try the following fucntion modules:
    HR_NZ_ROUNDING_DECIMALS
    ROUND
    CALL FUNCTION 'ROUND'
        EXPORTING
          DECIMALS      = 0
          INPUT         = var1
          SIGN          = '-'
        IMPORTING
          OUTPUT        = var1
        EXCEPTIONS
          INPUT_INVALID = 1
          OVERFLOW      = 2
          TYPE_INVALID  = 3
          OTHERS        = 4.
      IF SY-SUBRC  0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    Regards,
    Chandra Sekhar

  • Decimal place in duration

    hi all
    i want to enter duration in 2 decimal placess in internal activity. but system will not accepting 2 decimal place.
    Plz guide me where i can make setting for 2 decimal place.
    Regards
    KP..

    Hello..
        This is not posible until you change the datatype characters to 2 Decimal. Default is one. Check dataelements ARBEIT and DAUNOR. There a feature where you can use a custom Built in Data type for this field. You can specify the total length and the number of decimal places.
    Regards
    Renjith
    Warning: any change to standard SAP datatypes in production, has to be done after careful research.

Maybe you are looking for

  • System-wide freeze when Time Machine begins back up - Mac Pro 10.7.5

    I  have recently upgraded my MacPro Intel Early 2008 to Lion 10.7.5 on an external drive. Overall this nice fresh install has been working very well. The problem is that every 2 hours Time Machine starts its automatic back up and then ... A) Music pl

  • Shift click itunes is not bringing up the box to choose a library

    I have been using multiple itunes libraries for years and I am well aware how to access them and/or create new ones using shift +click itunes.  Recently this stopped working and I can do exactly that 20-25x in a row and MAYBE then I will get the box.

  • What is a layered structured illustrator file?

    Hi, Im currently converting some images to vector images They have asked can i provide them in a "layered structured illustrator file". Im Relatively experienced with Illustrator and have never come across the term before im assuming they simply mean

  • Where do I find my downloaded items

    I am new to mac computers so please bare with me. I downloaded microsft office free trial to my computer but i cant seem to find where its at on my computer. when i click on the pages section it is there but when i click on it, it starts downloading

  • AppleMobileDeviceHelper has stopped working - Windows Vista Home Premium 64

    I have iTunes 9.0.1 on my Acer AX1700-U3700A running Windows Vista Home Premium 64-bit version. In case it matters I am using McAfee. I can connect my iPhone 3G to my computer and iTunes finds it. But whenever I "right click" on the iPhone icon I get