Performance Counters on Windows Server 2003
This is a new install of ColdFusion MX7 on Windows Server
2003. When I open up Performance Monitor in the Operating System I
don't have any counters for ColdFusion.
+ The "Enable Performance Monitoring" option is checked "On"
in the CF Administrator.
+ This is a single server installation
I've never had this problem before after many CF installs. Is
there some way to add them manually?
Thanks
HI
whats your client system configuration like RAM size(Greater than 1 gb is effective) and also check the virtual memory.
sometime,Bandwidth allocation may cause the connectivity slow between client and server.
If so,try to increase the bandwidth.
Similar Messages
-
11g performance counters error on Server 2003
Environment - fresh install of 11g (11.1.0.6.0) on a fresh Server 2003 R2 box. All configuration is largely out-of-the-box.
When I start the "Oracle Counters for Windows Performance Monitor" item from the start menu, I get a dialog box error with the following:
Unable to add these counters:
\Oracle11 Sorts(0)\sorts in memory/sec
\Oracle11 Sorts(0)\sorts on disk/sec
Clicking OK to that error, Performance Monitor does come up but when I try to add a counter, there is no Oracle-related Performance Object to choose, just the standard Windows, ASP, etc. ones.
Any ideas?Personally I'd rather use Grid Control on x86-64 Linux.
But, I was asking about the error message I'm getting in hopes that perhaps someone else has seen this to. I wasn't asking what operating system to choose for Oracle, nor what management tool is best, though I do appreciate your feedback. As for why: simple curiousity. I want to poke around to see how 11g metrics are exposed and instrumented within Windows' own management frameworks, since I run into Oracle-on-Windows quite a bit. Pushing buttons in test environments just to see what they do is how we learn the strengths and weaknesses of all these technology products. -
Windows Server 2003 No Mouse or Keyboard
Hi,
After a hard reboot (accidentally being unplugged) I have no mouse and keyboard input. I am stuck on the Login Screen. I am using a hard wired USB keyboard and mouse and I don't have a PS/2 on the computer. Accessing the computer remotely is not an option
because I can't login to start any programs.
ThanksYou might try a repair install.
How to Perform an In-Place Upgrade of Windows Server 2003
How to integrate Windows Server 2003 Service Pack 2 files into the Windows Server 2003 installation folder
If the media is lost.
How to replace Microsoft software or hardware, order service packs, and replace product manuals
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
Active Directory not working Windows Server 2003 R2
Hi,
Like the subject said my root problem is either my Active Directory or DSN server. In order to properly explain the situation I will have to make the full Story. I was contacted by a family member to help
out a Non profit organisation with there server problem. Their current config is Windows Server 2003 R2 Running DC,AD,DNS,DCHP,File Services( i know is not efficient).
Here is how I come in to play, prior of me helping the had another server running same spec started having hardware failure and the invested in a new server. The person that set it up did replicate the server
on the new one as far as AC and Domain controller but nothing else. We ll now the DC01 failed and no user cannot login into a new computer
or if a new employee will try to added the changes don't take effect. Seeing the situation I went for the basic and seize fsmo roles to the new server. Perform Metadata clean up. Configure the DC02 as Master Domain Controller. Now everything
is set up and running but still No new user can be added or any exiting can log in
a different computer. At this point am out of answer I try everything I found in the forum. Am almost to the verge of deleting all and start
from scratch me knowing all config. Sorry for the long story am not good on resuming stuff. Please let me know If I need to add any other detail
I repeat DC01 is DEAD...
Also when a new user try to login or an existing user try to loging they get the system cannot log you on now because the domain is not availableNot Sure if this is the info requested but I ran the commands
Microsoft Windows [Version 5.2.3790]
(C) Copyright 1985-2003 Microsoft Corp.
C:\Documents and Settings\administrator.LUTHERAN>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : dc02
Primary Dns Suffix . . . . . . . : Lutheran.local
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : Lutheran.local
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom BCM5708C NetXtreme II GigE (NDIS
VBD Client) #45
Physical Address. . . . . . . . . : 00-1C-23-BF-E6-69
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.100.6
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.100.1
DNS Servers . . . . . . . . . . . : 192.168.100.6
Primary WINS Server . . . . . . . : 192.168.100.6
C:\Documents and Settings\administrator.LUTHERAN>
-Interface Name: ndis5
Upper Component: Internet Protocol (TCP/IP)
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #48
Owner of the binding path : WINS Client(TCP/IP) Protocol
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: tdi
Upper Component: WINS Client(TCP/IP) Protocol
Lower Component: Internet Protocol (TCP/IP)
-Interface Name: ndiswanip
Upper Component: Internet Protocol (TCP/IP)
Lower Component: WAN Miniport (IP)
Component Name : Internet Protocol (TCP/IP)
Bind Name: Tcpip
Binding Paths:
Owner of the binding path : Internet Protocol (TCP/IP)
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: ndis5
Upper Component: Internet Protocol (TCP/IP)
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #45
Owner of the binding path : Internet Protocol (TCP/IP)
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: ndis5
Upper Component: Internet Protocol (TCP/IP)
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #48
Owner of the binding path : Internet Protocol (TCP/IP)
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: ndiswanip
Upper Component: Internet Protocol (TCP/IP)
Lower Component: WAN Miniport (IP)
Component Name : Client for Microsoft Networks
Bind Name: LanmanWorkstation
Binding Paths:
Owner of the binding path : Client for Microsoft Networks
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios_smb
Upper Component: Client for Microsoft Networks
Lower Component: Message-oriented TCP/IP Protocol (SMB session)
Owner of the binding path : Client for Microsoft Networks
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios
Upper Component: Client for Microsoft Networks
Lower Component: WINS Client(TCP/IP) Protocol
-Interface Name: tdi
Upper Component: WINS Client(TCP/IP) Protocol
Lower Component: Internet Protocol (TCP/IP)
-Interface Name: ndis5
Upper Component: Internet Protocol (TCP/IP)
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #45
Owner of the binding path : Client for Microsoft Networks
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios
Upper Component: Client for Microsoft Networks
Lower Component: WINS Client(TCP/IP) Protocol
-Interface Name: tdi
Upper Component: WINS Client(TCP/IP) Protocol
Lower Component: Internet Protocol (TCP/IP)
-Interface Name: ndis5
Upper Component: Internet Protocol (TCP/IP)
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #48
Owner of the binding path : Client for Microsoft Networks
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios
Upper Component: Client for Microsoft Networks
Lower Component: WINS Client(TCP/IP) Protocol
-Interface Name: tdi
Upper Component: WINS Client(TCP/IP) Protocol
Lower Component: Internet Protocol (TCP/IP)
-Interface Name: ndiswanip
Upper Component: Internet Protocol (TCP/IP)
Lower Component: WAN Miniport (IP)
Component Name : WebClient
Bind Name: WebClient
Binding Paths:
Component Name : DHCP Server
Bind Name: DHCPServer
Binding Paths:
Component Name : Wireless Configuration
Bind Name: wzcsvc
Binding Paths:
Component Name : Network Load Balancing
Bind Name: Wlbs
Binding Paths:
Owner of the binding path : Network Load Balancing
Binding Enabled: No
Interfaces of the binding path:
-Interface Name: ndis5
Upper Component: Network Load Balancing
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #45
Owner of the binding path : Network Load Balancing
Binding Enabled: No
Interfaces of the binding path:
-Interface Name: ndis5
Upper Component: Network Load Balancing
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #48
Component Name : Steelhead
Bind Name: RemoteAccess
Binding Paths:
Component Name : Dial-Up Server
Bind Name: msrassrv
Binding Paths:
Component Name : Remote Access Connection Manager
Bind Name: RasMan
Binding Paths:
Component Name : Dial-Up Client
Bind Name: msrascli
Binding Paths:
Component Name : File and Printer Sharing for Microsoft Networks
Bind Name: LanmanServer
Binding Paths:
Owner of the binding path : File and Printer Sharing for Microsoft Netwo
rks
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios_smb
Upper Component: File and Printer Sharing for Microsoft Networks
Lower Component: Message-oriented TCP/IP Protocol (SMB session)
Owner of the binding path : File and Printer Sharing for Microsoft Netwo
rks
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios
Upper Component: File and Printer Sharing for Microsoft Networks
Lower Component: WINS Client(TCP/IP) Protocol
-Interface Name: tdi
Upper Component: WINS Client(TCP/IP) Protocol
Lower Component: Internet Protocol (TCP/IP)
-Interface Name: ndis5
Upper Component: Internet Protocol (TCP/IP)
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #45
Owner of the binding path : File and Printer Sharing for Microsoft Netwo
rks
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios
Upper Component: File and Printer Sharing for Microsoft Networks
Lower Component: WINS Client(TCP/IP) Protocol
-Interface Name: tdi
Upper Component: WINS Client(TCP/IP) Protocol
Lower Component: Internet Protocol (TCP/IP)
-Interface Name: ndis5
Upper Component: Internet Protocol (TCP/IP)
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #48
Owner of the binding path : File and Printer Sharing for Microsoft Netwo
rks
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios
Upper Component: File and Printer Sharing for Microsoft Networks
Lower Component: WINS Client(TCP/IP) Protocol
-Interface Name: tdi
Upper Component: WINS Client(TCP/IP) Protocol
Lower Component: Internet Protocol (TCP/IP)
-Interface Name: ndiswanip
Upper Component: Internet Protocol (TCP/IP)
Lower Component: WAN Miniport (IP)
Component Name : Generic Packet Classifier
Bind Name: Gpc
Binding Paths:
Component Name : Application Layer Gateway
Bind Name: ALG
Binding Paths:
Component Name : NetBIOS Interface
Bind Name: NetBIOS
Binding Paths:
Owner of the binding path : NetBIOS Interface
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios
Upper Component: NetBIOS Interface
Lower Component: WINS Client(TCP/IP) Protocol
-Interface Name: tdi
Upper Component: WINS Client(TCP/IP) Protocol
Lower Component: Internet Protocol (TCP/IP)
-Interface Name: ndis5
Upper Component: Internet Protocol (TCP/IP)
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #45
Owner of the binding path : NetBIOS Interface
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios
Upper Component: NetBIOS Interface
Lower Component: WINS Client(TCP/IP) Protocol
-Interface Name: tdi
Upper Component: WINS Client(TCP/IP) Protocol
Lower Component: Internet Protocol (TCP/IP)
-Interface Name: ndis5
Upper Component: Internet Protocol (TCP/IP)
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #48
Owner of the binding path : NetBIOS Interface
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios
Upper Component: NetBIOS Interface
Lower Component: WINS Client(TCP/IP) Protocol
-Interface Name: tdi
Upper Component: WINS Client(TCP/IP) Protocol
Lower Component: Internet Protocol (TCP/IP)
-Interface Name: ndiswanip
Upper Component: Internet Protocol (TCP/IP)
Lower Component: WAN Miniport (IP)
Component Name : WAN Miniport (IP)
Bind Name: NdisWanIp
Binding Paths:
Component Name : Direct Parallel
Bind Name: {A4DC6983-452B-41F9-B696-5112E5E6F1C6}
Binding Paths:
Component Name : WAN Miniport (PPPOE)
Bind Name: {5B69EEC5-2676-460B-9E03-F38B02BA4474}
Binding Paths:
Component Name : WAN Miniport (PPTP)
Bind Name: {DEE98315-C28A-4CC8-9233-E6C3506C16D3}
Binding Paths:
Component Name : WAN Miniport (L2TP)
Bind Name: {9BFC4E35-93B2-4811-8A56-69149ED0837E}
Binding Paths:
Component Name : RAS Async Adapter
Bind Name: {50239872-7742-4BB5-A28E-0B814085C2A6}
Binding Paths:
Component Name : Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Client) #48
Bind Name: {19218099-5DDC-4936-A111-75E4D7250A24}
Binding Paths:
Component Name : Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Client) #45
Bind Name: {52BE526E-7FAE-4458-9691-E333DA333601}
Binding Paths:
WAN configuration test . . . . . . : Skipped
No active remote access connections.
Modem diagnostics test . . . . . . : Passed
IP Security test . . . . . . . . . : Skipped
Note: run "netsh ipsec dynamic show /?" for more detailed information
The command completed successfully
C:\Documents and Settings\administrator.LUTHERAN> -
Windows Server 2003 R2 Backup with Hyper-V in DPM
Hello,
I am trying to backup multiple Windows Server 2003 R2 VMs on Hyper-V (Windows Server 2012 R2) with DPM.
When I try to this I get the following errors:
On the Hyper-V Host:
Source: VSS ID:8229
A VSS writer has rejected an event with error 0x800423f4, The writer experienced a non-transient error. If the backup process is retried,
the error is likely to reoccur.
. Changes that the writer made to the writer components while handling the event will not be available to the requester. Check the event log for related events from the application hosting the VSS writer.
Operation:
PrepareForSnapshot Event
Context:
Execution Context: Writer
Writer Class Id: {66841cd4-6ded-4f4b-8f17-fd23f8ddc3de}
Writer Name: Microsoft Hyper-V VSS Writer
Writer Instance ID: {0b5be050-91e2-41a6-9207-414f1291f975}
Command Line: C:\Windows\system32\vmms.exe
Process ID: 5312
Source: Hyper-V-VMMS ID: 18014
Checkpoint operation for 'VMName' was cancelled. (Virtual machine ID D605FC49-D379-4C60-A730-485C8E9279DC)
Source: Hyper-V-VMMS ID: 18012
Checkpoint operation for 'VMName' failed. (Virtual machine ID D605FC49-D379-4C60-A730-485C8E9279DC)
Source: Hyper-V-VMMS ID: 10150
Could not create backup checkpoint for virtual machine 'VMName': Element not found. (0x80070490). (Virtual machine ID D605FC49-D379-4C60-A730-485C8E9279DC)
Source: Hyper-V-Worker ID: 3280
'VMName' could not initiate a checkpoint operation: Element not found. (0x80070490). (Virtual machine ID D605FC49-D379-4C60-A730-485C8E9279DC)
Source: Hyper-V-VMMS ID: 16010
The operation failed.
The Output of vssadmin list writers on the Hyper-V Host looks like this:
Writer name: 'Microsoft Hyper-V VSS Writer'
Writer Id: {66841cd4-6ded-4f4b-8f17-fd23f8ddc3de}
Writer Instance Id: {0b5be050-91e2-41a6-9207-414f1291f975}
State: [8] Failed
Last error: Non-retryable error
In the Windows Server 2003 R2 VM there are no errors in the eventlog.
Only the information, that VSS is started and stopped after a while.
When I do a Backup with ntbackup of in the VM everything runs fine.
When I create a checkpoint with Hyper-V everything runs fine, too.
The integration services are up to date and get-vmintegrationservice -vmname VMName shows everything is enabled and OK.
On the Hyper-V host there are 13 VMs. 3 of them are running Windows Server 2003 R2 and 2 of them are showing this error. It seems to be no general problem with Windows Server 2003 R2 then.
I tried the backup on a different Hyper-V host with no success.
How can I narrow down the cause of this error?
Thanks.
greets,
torstenThank you to everyone in this thread!
After digging through VSS and Hyper-V dead-ends, the solution above worked for me in a W2012 R2 environment.
I only had this problem trying to back up W2012 R2 Hyper-V VMs stored on a CSV, hosted on a W2012 R2 Host Cluster, backing up from a Host node. I could back up from within the guests fine. Both Windows Server Backup and DPM 2012 R2
gave VSS errors on the cluster hosts.
In fact Windows Server Backup complains with 80780189 it won't back up an application with files on a CSV, which is a common cluster configuration. This is an example of another caveat in a minefield of MS caveats buried in fine print which often negates
configurations touted by MS Marketing, things which sound great on a sell sheet, but in practice are impractical or just not production-ready because of these restrictions.
Disabled Backup in Integration Services, performed an offline back up from DPM 2012 R2 (which did briefly affect serving the workloads on the VM), which succeeded, and then re-enabled Backup in Integration Services. DPM then continued to
sync successfully after that for a day. However, this problem returned after a period of heavy DPM backup activity. So I redistributed backups through various Protection Groups to spread the DPM load over a longer period and this seems to
have solved this problem.
In general I had lots of problems installing, configuring, and now operating DPM, so the experience has not been smooth, but most of the problems have now been solved. I find you have to "baby" this product and not push it too hard,
otherwise things start breaking.
Thanks again everyone!
DPM Error ID 30111 0x800423F4
DPM-EM Event ID 3106 -
INS-20802 Oracle net configuration assistant failed on windows server 2003 R2
Hi all,
I have windows server 2003 r2 installed on VM and tried installing oracle database 11g r2.
But got Oracle net configuration assistant failed. Below is the log
INFO: This variable JRE_HOME is not added to the global context map
INFO: This variable ISQLPLUS_PROTOCOL is not added to the global context map
INFO: This variable ISQLPLUS_PORT is not added to the global context map
INFO: This variable HOST_SID_OFFSET_ENABLED is not added to the global context map
INFO: This variable HOSTNAME is not added to the global context map
INFO: This variable EM_UPLOAD_DISABLE is not added to the global context map
INFO: This variable EM_UIX_DEBUG_FLAG is not added to the global context map
INFO: This variable EMPRODVER is not added to the global context map
INFO: This variable CONSOLE_MODE is not added to the global context map
INFO: This variable CONSOLE_CFG is not added to the global context map
INFO: This variable sl_oraclehomes is not added to the global context map
INFO: This variable s_oc4jDir is not added to the global context map
INFO: This variable s_oc4jAppsDir is not added to the global context map
INFO: This variable s_jreHome is not added to the global context map
INFO: This variable s_configcommand is not added to the global context map
INFO: This variable b_isRAC is not added to the global context map
INFO: This variable b_UNIX is not added to the global context map
INFO: This variable OJSP_JAR_LOC is not added to the global context map
INFO: This variable OJSPUTIL_JAR_LOC is not added to the global context map
INFO: This variable LDAP_JAR_LOC is not added to the global context map
INFO: This variable JAVA_HOME is not added to the global context map
INFO: This variable ISQLPLUS_HOST is not added to the global context map
INFO: This variable EM_UIX_LOCATION is not added to the global context map
INFO: This variable EM_REPOS_HOST is not added to the global context map
INFO: This variable EM_PING_COMMAND is not added to the global context map
INFO: This variable EM_OC4J_HOME is not added to the global context map
INFO: This variable EM_EAR_LOC is not added to the global context map
INFO: This variable EMDROOT is not added to the global context map
INFO: Adding the variable s_oc4jAdmPasswd to the aggregate oracle.sysman.console.db
INFO: Adding the variable s_oc4jAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
INFO: This variable s_launchBrowserClasspath is not added to the global context map
INFO: This variable s_javapOracleHome is not added to the global context map
INFO: This variable PROD_HOME is not added to the global context map
INFO: {Parameter:TOPLEVEL_COMPONENT in {Aggregate:OuiConfigVariables:1.0.0.0.0:common}}: Parameter data type is not compatible with the provided String Array.
INFO: passing params to cf done
INFO: done saving info by cf
INFO: This is a shared oracle home or remote nodes are null. No copy required.
INFO: Checkpoint:Failed Checkpoint found returning it for getAllFailedCheckPoints.
INFO: Checkpoint:Failed Checkpoint found returning null for getLastFailedCheckPoint.
INFO: Checkpoint:Index file written and updated
INFO: Checkpoint:Transfer of file done from remote node
INFO: Updating the global context
INFO: Path To 'globalcontext.xml' = C:\oracle\product\11.2.0\dbhome_1\install\chainedInstall\globalcontext
INFO: Since operation was successful, move the current OiicAPISessionDetails to installed list
INFO: Number of root scripts to be executed = 0
INFO: isSuccessfullInstallation: true
INFO: isSuccessfullRemoteInstallation: true
INFO: Adding ExitStatus SUCCESS to the exit status set
INFO: Completed setting up InstallDB
INFO: Performing Configuration
INFO: Entering ConfigClient.init method
INFO: ConfigClient.init sOracleHomeLoc=C:\oracle\product\11.2.0\dbhome_1, sTopAggId=oracle.server
INFO: Entering ConfigClient.initClientAndSession method
INFO: ConfigClient.initClientAndSession status : connected to the config framework
INFO: ConfigClient.initClientAndSession session begun oracle.sysman.emCfg.client.CfwSession@c0d228
INFO: ConfigClient.initClientAndSession m_oAggregate=[Loracle.sysman.emCfg.common.IAggregate;@1257f0e
INFO: Configuration log directory - C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs
INFO: Exiting ConfigClient.init method
INFO: Calling event ConfigSessionInitialized
INFO: ConfigClient.registerOutErrStream method called
INFO: Entering ConfigClient.getToolsList method
INFO: Created config job for Oracle Net Configuration Assistant
INFO: Created config job for Oracle Database Configuration Assistant
INFO: Updating Transient Parameters in the Aggregates
INFO: Updating Transient Parameters for oracle.server
INFO: Updating Transient Parameters for oracle.assistants.netca.client
INFO: Updating Transient Parameters for oracle.assistants.server
INFO: Setting value to transient variable s_dbcaArgs
INFO: Setting value to transient variable S_SYSMANPASSWORD
INFO: Setting value to transient variable s_systemPasswordFlag
INFO: Setting value to transient variable s_sysmanPasswordFlag
INFO: Setting value to transient variable S_HOSTUSERPASSWORD
INFO: Setting value to transient variable s_dbcaArgsOverride
INFO: Setting value to transient variable windows_commandline_prefix
INFO: Setting value to transient variable s_sysPasswordFlag
INFO: Setting value to transient variable S_SYSPASSWORD
INFO: Setting value to transient variable s_asmsnmpPasswordFlag
INFO: Setting value to transient variable S_DBSNMPPASSWORD
INFO: Setting value to transient variable s_dbsnmpPasswordFlag
INFO: Setting value to transient variable S_ASMSNMPPASSWORD
INFO: Setting value to transient variable S_SYSTEMPASSWORD
INFO: Setting value to transient variable s_hostUserPasswordFlag
INFO: Updating Transient Parameters for OuiConfigVariables
INFO: Updating Transient Parameters for oracle.sysman.ccr
INFO: Updating Transient Parameters for oracle.sysman.console.db
INFO: Successfully updated Transient Parameters in the Aggregates
INFO: Configuration log directory - C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs
INFO:
The Runconfig command constructed is C:\oracle\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\oracle\product\11.2.0\dbhome_1 MODE=perform ACTION=configure RERUN=true $*
INFO: Created a new file C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands
INFO: Since the option is to overwrite the existing C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands file, backing it up
INFO: The backed up file name is C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands.bak
INFO: Entering ConfigClient.executeToolsInAggregate method
INFO: ConfigClient.executeToolsInAggregate oAggregate=oracle.server:oracle.server:11.2.0.1.0:common
INFO: Entering ConfigClient.assignAction method
INFO: ConfigClient.assignAction actionref=[Loracle.sysman.emCfg.common.IActionReference;@1ae9cec
INFO: ConfigClient.assignAction action is of type :configuration
INFO: Exiting ConfigClient.assignAction method
INFO: ConfigClient.executeToolsInAggregate action assigned
INFO: Started Plugin named: Oracle Net Configuration Assistant
INFO: Found associated job
INFO: Starting 'Oracle Net Configuration Assistant'
INFO: Starting 'Oracle Net Configuration Assistant'
INFO: UnsatisfiedLinkError exception loading native library: oranjni11
INFO: java.lang.UnsatisfiedLinkError: C:\oracle\product\11.2.0\dbhome_1\BIN\oranjni11.dll: Can't find dependent libraries
WARNING: java.lang.UnsatisfiedLinkError: jniGetOracleHome
WARNING: at oracle.net.common.NetGetEnv.jniGetOracleHome(Native Method)
WARNING: at oracle.net.common.NetGetEnv.getOracleHome(Unknown Source)
WARNING: at oracle.net.ca.NetCALogger.getOracleHome(NetCALogger.java:230)
WARNING: at oracle.net.ca.NetCALogger.initOracleParameters(NetCALogger.java:215)
WARNING: at oracle.net.ca.NetCALogger.initLogger(NetCALogger.java:130)
WARNING: at oracle.net.ca.NetCA.main(NetCA.java:408)
INFO:
INFO: Error: jniGetOracleHome
INFO: Oracle Net Services configuration failed. The exit code is 1
INFO:
WARNING:
INFO: Completed Plugin named: Oracle Net Configuration Assistant
INFO: Oracle Net Configuration Assistant failed.
INFO: Oracle Net Configuration Assistant failed.
INFO: ConfigClient.executeToolsInAggregate action performed
INFO: Exiting ConfigClient.executeToolsInAggregate method
INFO: Calling event ConfigToolsExecuted
INFO:
The Runconfig command constructed is C:\oracle\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\oracle\product\11.2.0\dbhome_1 MODE=perform ACTION=configure RERUN=false $*
INFO: Created a new file C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands
INFO: Since the option is to overwrite the existing C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands.bak
WARNING: readme.txt file doesn't exits
INFO: ConfigClient.saveSession method called
INFO: Calling event ConfigSessionEnding
INFO: ConfigClient.endSession method called
INFO: Completed Configuration
INFO: Shutting down OUISetupDriver.JobExecutorThread
INFO: Cleaning up, please wait...
INFO: Dispose the install area control object
INFO: Update the state machine to STATE_CLEAN
INFO: All forked task are completed at state setup
INFO: Completed background operations
INFO: Moved to state <setup>
INFO: Performing Configuration
INFO: Entering ConfigClient.init method
INFO: ConfigClient.init sOracleHomeLoc=C:\oracle\product\11.2.0\dbhome_1, sTopAggId=oracle.server
INFO: Entering ConfigClient.initClientAndSession method
INFO: ConfigClient.initClientAndSession status : connected to the config framework
INFO: ConfigClient.initClientAndSession session begun oracle.sysman.emCfg.client.CfwSession@140de18
INFO: ConfigClient.initClientAndSession m_oAggregate=[Loracle.sysman.emCfg.common.IAggregate;@1b52041
INFO: Configuration log directory - C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs
INFO: Exiting ConfigClient.init method
INFO: Calling event ConfigSessionInitialized
INFO: ConfigClient.registerOutErrStream method called
INFO: Entering ConfigClient.getToolsList method
INFO: Selecting job named 'Oracle Net Configuration Assistant' for retry
INFO: Selecting job named 'Oracle Database Configuration Assistant' for retry
INFO: Updating Transient Parameters in the Aggregates
INFO: Updating Transient Parameters for oracle.server
INFO: Updating Transient Parameters for oracle.assistants.netca.client
INFO: Updating Transient Parameters for oracle.assistants.server
INFO: Setting value to transient variable s_dbcaArgs
INFO: Setting value to transient variable S_SYSMANPASSWORD
INFO: Setting value to transient variable s_systemPasswordFlag
INFO: Setting value to transient variable s_sysmanPasswordFlag
INFO: Setting value to transient variable S_HOSTUSERPASSWORD
INFO: Setting value to transient variable s_dbcaArgsOverride
INFO: Setting value to transient variable windows_commandline_prefix
INFO: Setting value to transient variable s_sysPasswordFlag
INFO: Setting value to transient variable S_SYSPASSWORD
INFO: Setting value to transient variable s_asmsnmpPasswordFlag
INFO: Setting value to transient variable S_DBSNMPPASSWORD
INFO: Setting value to transient variable s_dbsnmpPasswordFlag
INFO: Setting value to transient variable S_ASMSNMPPASSWORD
INFO: Setting value to transient variable S_SYSTEMPASSWORD
INFO: Setting value to transient variable s_hostUserPasswordFlag
INFO: Updating Transient Parameters for OuiConfigVariables
INFO: Updating Transient Parameters for oracle.sysman.ccr
INFO: Updating Transient Parameters for oracle.sysman.console.db
INFO: Successfully updated Transient Parameters in the Aggregates
INFO: Configuration log directory - C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs
INFO:
The Runconfig command constructed is C:\oracle\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\oracle\product\11.2.0\dbhome_1 MODE=perform ACTION=configure RERUN=true $*
INFO: Since the option is to overwrite the existing C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands file, backing it up
INFO: The backed up file name is C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands.bak.1
INFO: Entering ConfigClient.executeSelectedToolsInAggregate method
INFO: ConfigClient.executeSelectedToolsInAggregate oAggregate=oracle.server:oracle.server:11.2.0.1.0:common
INFO: Entering ConfigClient.assignAction method
INFO: ConfigClient.assignAction actionref=[Loracle.sysman.emCfg.common.IActionReference;@b970f5
INFO: ConfigClient.assignAction action is of type :configuration
INFO: Exiting ConfigClient.assignAction method
INFO: ConfigClient.executeSelectedToolsInAggregate action assigned
INFO: Started Plugin named: Oracle Net Configuration Assistant
INFO: Found associated job
INFO: Starting 'Oracle Net Configuration Assistant'
INFO: Starting 'Oracle Net Configuration Assistant'
INFO: UnsatisfiedLinkError exception loading native library: oranjni11
INFO: java.lang.UnsatisfiedLinkError: C:\oracle\product\11.2.0\dbhome_1\BIN\oranjni11.dll: Can't find dependent libraries
WARNING: java.lang.UnsatisfiedLinkError: jniGetOracleHome
WARNING: at oracle.net.common.NetGetEnv.jniGetOracleHome(Native Method)
WARNING: at oracle.net.common.NetGetEnv.getOracleHome(Unknown Source)
WARNING: at oracle.net.ca.NetCALogger.getOracleHome(NetCALogger.java:230)
WARNING: at oracle.net.ca.NetCALogger.initOracleParameters(NetCALogger.java:215)
WARNING: at oracle.net.ca.NetCALogger.initLogger(NetCALogger.java:130)
WARNING: at oracle.net.ca.NetCA.main(NetCA.java:408)
INFO:
INFO: Error: jniGetOracleHome
INFO: Oracle Net Services configuration failed. The exit code is 1
INFO:
WARNING:
INFO: Completed Plugin named: Oracle Net Configuration Assistant
INFO: Oracle Net Configuration Assistant failed.
INFO: Oracle Net Configuration Assistant failed.
INFO: ConfigClient.executeSelectedToolsInAggregate action performed
INFO: Exiting ConfigClient.executeSelectedToolsInAggregate method
INFO:
The Runconfig command constructed is C:\oracle\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\oracle\product\11.2.0\dbhome_1 MODE=perform ACTION=configure RERUN=false $*
INFO: Since the option is to overwrite the existing C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands.bak.1
WARNING: readme.txt file doesn't exits
INFO: ConfigClient.saveSession method called
INFO: Calling event ConfigSessionEnding
INFO: ConfigClient.endSession method called
INFO: Completed Configuration
INFO: Performing Configuration
INFO: Entering ConfigClient.init method
INFO: ConfigClient.init sOracleHomeLoc=C:\oracle\product\11.2.0\dbhome_1, sTopAggId=oracle.server
INFO: Entering ConfigClient.initClientAndSession method
INFO: ConfigClient.initClientAndSession status : connected to the config framework
INFO: ConfigClient.initClientAndSession session begun oracle.sysman.emCfg.client.CfwSession@969e08
INFO: ConfigClient.initClientAndSession m_oAggregate=[Loracle.sysman.emCfg.common.IAggregate;@6155e3
INFO: Configuration log directory - C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs
INFO: Exiting ConfigClient.init method
INFO: Calling event ConfigSessionInitialized
INFO: ConfigClient.registerOutErrStream method called
INFO: Entering ConfigClient.getToolsList method
INFO: Selecting job named 'Oracle Net Configuration Assistant' for retry
INFO: Selecting job named 'Oracle Database Configuration Assistant' for retry
INFO: Updating Transient Parameters in the Aggregates
INFO: Updating Transient Parameters for oracle.server
INFO: Updating Transient Parameters for oracle.assistants.netca.client
INFO: Updating Transient Parameters for oracle.assistants.server
INFO: Setting value to transient variable s_dbcaArgs
INFO: Setting value to transient variable S_SYSMANPASSWORD
INFO: Setting value to transient variable s_systemPasswordFlag
INFO: Setting value to transient variable s_sysmanPasswordFlag
INFO: Setting value to transient variable S_HOSTUSERPASSWORD
INFO: Setting value to transient variable s_dbcaArgsOverride
INFO: Setting value to transient variable windows_commandline_prefix
INFO: Setting value to transient variable s_sysPasswordFlag
INFO: Setting value to transient variable S_SYSPASSWORD
INFO: Setting value to transient variable s_asmsnmpPasswordFlag
INFO: Setting value to transient variable S_DBSNMPPASSWORD
INFO: Setting value to transient variable s_dbsnmpPasswordFlag
INFO: Setting value to transient variable S_ASMSNMPPASSWORD
INFO: Setting value to transient variable S_SYSTEMPASSWORD
INFO: Setting value to transient variable s_hostUserPasswordFlag
INFO: Updating Transient Parameters for OuiConfigVariables
INFO: Updating Transient Parameters for oracle.sysman.ccr
INFO: Updating Transient Parameters for oracle.sysman.console.db
INFO: Successfully updated Transient Parameters in the Aggregates
INFO: Configuration log directory - C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs
INFO:
The Runconfig command constructed is C:\oracle\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\oracle\product\11.2.0\dbhome_1 MODE=perform ACTION=configure RERUN=true $*
INFO: Since the option is to overwrite the existing C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands file, backing it up
INFO: The backed up file name is C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands.bak.2
INFO: Entering ConfigClient.executeSelectedToolsInAggregate method
INFO: ConfigClient.executeSelectedToolsInAggregate oAggregate=oracle.server:oracle.server:11.2.0.1.0:common
INFO: Entering ConfigClient.assignAction method
INFO: ConfigClient.assignAction actionref=[Loracle.sysman.emCfg.common.IActionReference;@1e976fd
INFO: ConfigClient.assignAction action is of type :configuration
INFO: Exiting ConfigClient.assignAction method
INFO: ConfigClient.executeSelectedToolsInAggregate action assigned
INFO: Started Plugin named: Oracle Net Configuration Assistant
INFO: Found associated job
INFO: Starting 'Oracle Net Configuration Assistant'
INFO: Starting 'Oracle Net Configuration Assistant'
INFO: UnsatisfiedLinkError exception loading native library: oranjni11
INFO: java.lang.UnsatisfiedLinkError: C:\oracle\product\11.2.0\dbhome_1\BIN\oranjni11.dll: Can't find dependent libraries
WARNING: java.lang.UnsatisfiedLinkError: jniGetOracleHome
WARNING: at oracle.net.common.NetGetEnv.jniGetOracleHome(Native Method)
WARNING: at oracle.net.common.NetGetEnv.getOracleHome(Unknown Source)
WARNING: at oracle.net.ca.NetCALogger.getOracleHome(NetCALogger.java:230)
WARNING: at oracle.net.ca.NetCALogger.initOracleParameters(NetCALogger.java:215)
WARNING: at oracle.net.ca.NetCALogger.initLogger(NetCALogger.java:130)
WARNING: at oracle.net.ca.NetCA.main(NetCA.java:408)
INFO:
INFO: Error: jniGetOracleHome
INFO: Oracle Net Services configuration failed. The exit code is 1
WARNING:
INFO:
INFO: Completed Plugin named: Oracle Net Configuration Assistant
INFO: Oracle Net Configuration Assistant failed.
INFO: Oracle Net Configuration Assistant failed.
INFO: ConfigClient.executeSelectedToolsInAggregate action performed
INFO: Exiting ConfigClient.executeSelectedToolsInAggregate method
INFO:
The Runconfig command constructed is C:\oracle\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\oracle\product\11.2.0\dbhome_1 MODE=perform ACTION=configure RERUN=false $*
INFO: Since the option is to overwrite the existing C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands.bak.2
WARNING: readme.txt file doesn't exits
INFO: ConfigClient.saveSession method called
INFO: Calling event ConfigSessionEnding
INFO: ConfigClient.endSession method called
INFO: Completed ConfigurationHi Srini,
The issue is resolved. Thanks for your response.
The issue is, windows 2003 server is 32 bit and I am trying to install 64 bit 11g database. I tried installing 32 bit 11g database. Before that I have cleared the traces of virtual box in my host system and reinstalled it and tried. It worked out.
Thanks
Sunil -
Tuxedo Memory Leak Issue (Tuxedo 8.1 - Windows Server 2003)
Hi
We are running tuxedo 8.1, 32 bit with patch level 258 in our windows server 2003 based production environment. We are currently facing an issue where the memory usage of machine slowly keeps on going higher and higher eventually resulting in “Memory Allocation Failure” to tuxedo servers. We then have to do a complete restart of tuxedo which stabilizes the system for other few days.
We have been analyzing the our source code in development/test environment using different tools like a customized Alzheimer tool and IBM purify but both tools reported no memory leaks. We then developed a test tuxedo server exposing a tuxedo service which simply allocates a memory to a response buffer and then returns the response buffer. I then configured tuxedo queue with same name “MEMTEST3” and configured a TMQForward server to call this “MEMTEST3” service every time a message is en-queued to the MEMTEST3 queue.
unsigned long _LIBENTRY ulTPAlloc(FBFR32 **ppc, long size)
unsigned long ulRes = MSG_SUCCESS_c;
ppc = (FBFR32 ) tpalloc("FML32", (char *) 0, size);
if (*ppc == (FBFR32 *) 0) {
vLogMessage(hGetLogHandle(), MSG_MEM_ALLOC_ERR_c, (char *) 0, (Event_t *) 0,
BM_NOSUPPRESS_c, size);
ulRes = MSG_MEM_ALLOC_ERR_c;
return (ulRes);
/*==============================================================================
Service MEMTEST2
==============================================================================*/
void MEMTEST3(TPSVCINFO *pRequest)
FBFR32 *pFmlResponse = NULL;
FBFR32 *pFml = NULL;
unsigned long ulRes = MSG_SUCCESS_c;
unsigned long ulActionCode = 0;
int iExitValue = 0;
long lTpurcode = 0;
FBFR32 *pFmlNULL = NULL;
userlog("Starting MEMTEST3 service.");
if (pRequest == NULL || pRequest->data == NULL)
vLogMessage(hGetLogHandle(), MSG_API_ARGS_ERR_c, NULL, NULL, BM_NOSUPPRESS_c);
ulRes = MSG_API_ARGS_ERR_c;
else
pFml = (FBFR32 *) pRequest->data;
userlog("MEMTEST3: GET THE MEM");
ulRes = ulTPAlloc(&pFmlResponse, 1024);
userlog("Ending MEMTEST3 service.");
tpreturn( iExitValue, lTpurcode, ( char * ) pFmlResponse , 0L, 0L );
While I was en-queuing the messages to the queue, I kept on monitoring the memory usage of the server hosting the service. What I observed was that I saw an initial hike in the usage of memory of the server followed by small jumps in memory increase. I kept on monitoring the server for a long time and the memory was never returned. What I suspect is that there is memory leak in tuxedo TMQforward process as it never released the memory allocated in the service.
Can anyone help how this situation can be avoided ?
Kind Regards,
AsimHi Todd,
Also as well as my previous question, I also found your reply to another user posting something similar at Re: Memory leaks in Tuxedo libraries
You mention that:
In general Tuxedo will free anything it allocates, although there are cases where memory is allocated and not freed because:
+1) it is one time or a fixed number of times allocations that will not continue to grow, and freeing up the memory just before exiting isn't of any benefit.+
+2) the memory is under Tuxedo's memory management functions where we manage our own look aside lists to provide better buffer allocation performance and again freeing these before process termination is of little benefit.+
Our code does only issue TPALLOC once and then a TPRETURN - could point (1) of your comment above also be something of concern to us, where we would observe a continuous growth of memory usage?
I know it may sound like a stupid question but do we need to run our code 20,000 times before memory gets freed?
Kind Regards,
Asim -
System Refresh On Windows Server 2003 ( Oracle )
Hello Gurus,
We are having ecc5.0 production server on windows 2003 server ( oracle as an database ).
We want to perform system copy.
can somebody guide me the procedure on windows server.
Server Information
ECC - 5.0
Window Server - 2003
Oracle ( 9.2.0.8.0)
I have one doubt should we use SAPinst for export/import procedure or backup restore from our production server to dev server
regards
ShishirHi Shishir,
I have one doubt should we use SAPinst for export/import procedure or backup restore from our production server to dev server
DEV System is your original System never refresh DEV System with Production. It is recommended to do System refresh on QA system or any other stand alone system (Test System).
Also see the below points.
1. If you have large database then use the backup restore process. this will help you to reduce your downtime.
2. You can go for the export/import process i.e R3load using SAPinst.
For more information see the system copy guide as suggested earlier.
Thanks,
Shambo -
Windows Server 2003 R2 on MacBook Pro?
I've spent some time on Google and it seems some people have installed W2K3R2 with Boot Camp but they have a variety of driver issues. From what I've read the keyboard mapping is the most problematic issue initially? If anyone here in the forum is running Windows Server 2003 R2 on their MacBook Pro I would be very interested in hearing about your experience. While running W2K3R2 in VMware is an option, I am looking to extract maximum performance from this installation so Boot Camp would be ideal.
Hi,
since W2K3 and XP-64 uses the same code-base/kernel and XP-64 is not supported by Apple with BootCamp Drivers, this might be not that easy to solve.
I once installed XP-64 on my Mac Pro and while I was able to find most drivers for it on the internet, I couldn't get any Apple-specific hardware to work.
And the keyboard or better said, some special-keys like Eject, Brightness, etc. was one of them.
The basic keyboard functions should work.
Regards
Stefan -
Qurey - Installation of ECC6.0 ( Oracle10g+Windows Server 2003 )
Hello Gurus
I have an qurey regarding installation of ECC6.0 on Windows Server 2003 ( Oracle 10g)
While performing installation at the begining when we run sapinst server logoff at the begining, then we proceed ahead and start the installation.
My question why in windows server installation phase why our server log off.
I have observer in this time it creates a sapinst_instdir folder in program files and collect all the information of our installation
Can anybody gives me answer of my doubt
Thanks & Regards
Shishir> My question why in windows server installation phase why our server log off.
If you read the Window popping up before the system logs you off you will get that information...
Markus -
One of the DC can't connect to AD for Windows server 2003
Dear Sir,
We have 2 Domain Controllers in our Domain, DC1 and DC3, which is running on Windows Server 2003 SP2, I found the DC3 failed to connect to AD, and I found the following error message logged in the system event many time
Source: MRxSmb
Type : Error
主瀏覽器從電腦 DC1 收到 認為它是傳輸 NetBT_Tcpip_{C1D9AA59-2423-4059-A773 網域主瀏覽器的伺服器宣告。 主瀏覽器已中止或已強制選擇。
Source: KDC
Type: warning
找不到事件識別碼 20 (在來源 KDC 中) 的描述。本機電腦可能沒有所需的登錄資訊或訊息 DLL 檔案,因此無法顯示發自遠端電腦的訊息。您可以使用 /AUXSOURCE= flag 來重新抓取這個描述。請參閱 [說明及支援] 來了解詳細資料。以下資訊為事件的一部份: 事件日誌檔已損毀。
Source: Kerberos
Type: Error
The kerberos client received a KRB_AP_ERR_MODIFIED error from the server host/dc1.domain.com. This indicates that the password used to encrypt the kerberos service ticket is different than that on the target server. Commonly, this is due to identically
named machine accounts in the target realm (Domain name), and the client realm. Please contact your system administrator.
I have searched on internet, and tried some of the suggestions but still can't fixed the issue, I also can't depromo the DC3, and can't use remote desktop connection connect to DC3
What can I do now, can I just reinstall the DC3 and process the dcpromo again?Hi Calin,
Here is the log content for your reference:-
Domain Controller Diagnosis
Performing initial setup:
* Verifying that the local machine DC3, is a DC.
* Connecting to directory service on server DC3.
* Collecting site info.
* Identifying all servers.
* Identifying all NC cross-refs.
* Found 2 DC(s). Testing 1 of them.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\DC3
Starting test: Connectivity
* Active Directory LDAP Services Check
* Active Directory RPC Services Check
......................... DC3 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\DC3
Starting test: Replications
* Replications Check
[Replications Check,DC3] Inbound replication is disabled.
To correct, run "repadmin /options DC3 -DISABLE_INBOUND_REPL"
[Replications Check,DC3] Outbound replication is disabled.
To correct, run "repadmin /options DC3 -DISABLE_OUTBOUND_REPL"
......................... DC3 failed test Replications
Test omitted by user request: Topology
Test omitted by user request: CutoffServers
Starting test: NCSecDesc
* Security Permissions check for all NC's on DC DC3.
* Security Permissions Check for
DC=ForestDnsZones,DC=domain,DC=COM,DC=HK
(NDNC,Version 2)
* Security Permissions Check for
DC=DomainDnsZones,DC=domain,DC=COM,DC=HK
(NDNC,Version 2)
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=domain,DC=COM,DC=HK
(Schema,Version 2)
* Security Permissions Check for
CN=Configuration,DC=domain,DC=COM,DC=HK
(Configuration,Version 2)
* Security Permissions Check for
DC=domain,DC=COM,DC=HK
(Domain,Version 2)
......................... DC3 passed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
Verified share
\\DC3\netlogon
Verified share
\\DC3\sysvol
......................... DC3 passed test NetLogons
Starting test: Advertising
Warning: DsGetDcName returned information for
\\dc1.domain.COM.HK, when we were trying to reach DC3.
Server is not responding or is not considered suitable.
The DC DC3 is advertising itself as a DC and having a DS.
The DC DC3 is advertising as an LDAP server
The DC DC3 is advertising as having a writeable directory
The DC DC3 is advertising as a Key Distribution Center
The DC DC3 is advertising as a time server
[DC1] LDAP bind failed with error 8341,
Win32 Error 8341.
Server DC3 is advertising as a global catalog, but
it could not be verified that the server thought it was a GC.
......................... DC3 failed test Advertising
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=domain,DC=COM,DC=HK
[DC1] DsBindWithSpnEx() failed with error -2146893022,
Win32 Error -2146893022.
Warning: DC1 is the Schema Owner, but is not responding to DS RPC Bind.
Warning: DC1 is the Schema Owner, but is not responding to LDAP Bind.
Role Domain Owner = CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=domain,DC=COM,DC=HK
Warning: DC1 is the Domain Owner, but is not responding to DS RPC Bind.
Warning: DC1 is the Domain Owner, but is not responding to LDAP Bind.
Role PDC Owner = CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=domain,DC=COM,DC=HK
Warning: DC1 is the PDC Owner, but is not responding to DS RPC Bind.
Warning: DC1 is the PDC Owner, but is not responding to LDAP Bind.
Role Rid Owner = CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=domain,DC=COM,DC=HK
Warning: DC1 is the Rid Owner, but is not responding to DS RPC Bind.
Warning: DC1 is the Rid Owner, but is not responding to LDAP Bind.
Role Infrastructure Update Owner = CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=domain,DC=COM,DC=HK
Warning: DC1 is the Infrastructure Update Owner, but is not responding to DS RPC Bind.
Warning: DC1 is the Infrastructure Update Owner, but is not responding to LDAP Bind.
......................... DC3 failed test KnowsOfRoleHolders
Starting test: RidManager
* Available RID Pool for the Domain is 9126 to 1073741823
* dc1.domain.COM.HK is the RID Master
......................... DC3 failed test RidManager
Starting test: MachineAccount
Checking machine account for DC DC3 on DC DC3.
* SPN found :LDAP/DC3.domain.COM.HK/domain.COM.HK
* SPN found :LDAP/DC3.domain.COM.HK
* SPN found :LDAP/DC3
* SPN found :LDAP/DC3.domain.COM.HK/domainHK
* SPN found :LDAP/34106c30-327d-4d63-ae93-fec48cac2975._msdcs.domain.COM.HK
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/34106c30-327d-4d63-ae93-fec48cac2975/domain.COM.HK
* SPN found :HOST/DC3.domain.COM.HK/domain.COM.HK
* SPN found :HOST/DC3.domain.COM.HK
* SPN found :HOST/DC3
* SPN found :HOST/DC3.domain.COM.HK/domainHK
* SPN found :GC/DC3.domain.COM.HK/domain.COM.HK
......................... DC3 passed test MachineAccount
Starting test: Services
* Checking Service: Dnscache
* Checking Service: NtFrs
* Checking Service: IsmServ
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: RpcSs
* Checking Service: w32time
* Checking Service: NETLOGON
NETLOGON Service is paused on [DC3]
......................... DC3 failed test Services
Test omitted by user request: OutboundSecureChannels
Starting test: ObjectsReplicated
DC3 is in domain DC=domain,DC=COM,DC=HK
Checking for CN=DC3,OU=Domain Controllers,DC=domain,DC=COM,DC=HK in domain DC=domain,DC=COM,DC=HK on 1 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=DC3,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=domain,DC=COM,DC=HK in domain CN=Configuration,DC=domain,DC=COM,DC=HK on 1 servers
Object is up-to-date on all servers.
......................... DC3 passed test ObjectsReplicated
Starting test: frssysvol
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... DC3 passed test frssysvol
Starting test: frsevent
* The File Replication Service Event log test
There are warning or error events within the last 24 hours after the SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
An Warning Event occured. EventID: 0x800034C4
Time Generated: 11/04/2014 15:59:23
(Event String could not be retrieved)
......................... DC3 failed test frsevent
Starting test: kccevent
* The KCC Event log test
Found no KCC errors in Directory Service Event log in the last 15 minutes.
......................... DC3 passed test kccevent
Starting test: systemlog
* The System Event log test
An Error Event occured. EventID: 0x40000004
Time Generated: 11/05/2014 11:11:27
Event String: The kerberos client received a KRB_AP_ERR_MODIFIED error from the server host/dc1.domain.com.hk. The target name used was
ldap/dc1.domain.COM.HK/[email protected]. This indicates that the password used to encrypt the kerberos service ticket is different than that on the target server. Commonly, this
is due to identically named machine accounts in the target realm (domain.COM.HK), and the client realm. Please contact your system administrator.
An Error Event occured. EventID: 0x00000423
Time Generated: 11/05/2014 11:11:27
Event String: The DHCP service failed to see a directory server for authorization.
An Error Event occured. EventID: 0x40000004
Time Generated: 11/05/2014 11:29:56
Event String: The kerberos client received a KRB_AP_ERR_MODIFIED error from the server host/dc1.domain.com.hk. The target name used was
LDAP/dc1.domain.COM.HK/[email protected]. This indicates that the password used to encrypt the kerberos service ticket is different than that on the target server. Commonly, this
is due to identically named machine accounts in the target realm (domain.COM.HK), and the client realm. Please contact your system administrator.
An Error Event occured. EventID: 0x40000004
Time Generated: 11/05/2014 11:29:56
Event String: The kerberos client received a KRB_AP_ERR_MODIFIED error from the server host/dc1.domain.com.hk. The target name used was domainHK\DC1$. This indicates that the password
used to encrypt the kerberos service ticket is different than that on the target server. Commonly, this is due to identically named machine accounts in the target realm (domain.COM.HK), and the client realm. Please contact your system administrator.
An Error Event occured. EventID: 0x40000004
Time Generated: 11/05/2014 11:43:20
Event String: The kerberos client received a KRB_AP_ERR_MODIFIED error from the server host/dc1.domain.com.hk. The target name used was cifs/dc1.domain.COM.HK. This indicates that the
password used to encrypt the kerberos service ticket is different than that on the target server. Commonly, this is due to identically named machine accounts in the target realm (domain.COM.HK), and the client realm. Please contact your system
administrator.
An Error Event occured. EventID: 0x40000004
Time Generated: 11/05/2014 11:50:39
Event String: The kerberos client received a KRB_AP_ERR_MODIFIED error from the server host/dc1.domain.com.hk. The target name used was ldap/dc1.domain.COM.HK. This indicates that the
password used to encrypt the kerberos service ticket is different than that on the target server. Commonly, this is due to identically named machine accounts in the target realm (domain.COM.HK), and the client realm. Please contact your system
administrator.
An Error Event occured. EventID: 0x40000004
Time Generated: 11/05/2014 11:50:41
Event String: The kerberos client received a KRB_AP_ERR_MODIFIED error from the server host/dc1.domain.com.hk. The target name used was ldap/ba3f48bc-fa6a-4698-9947-ba8435cbf92b._msdcs.domain.COM.HK.
This indicates that the password used to encrypt the kerberos service ticket is different than that on the target server. Commonly, this is due to identically named machine accounts in the target realm (domain.COM.HK), and the client realm.
Please contact your system administrator.
An Error Event occured. EventID: 0x40000004
Time Generated: 11/05/2014 11:50:41
Event String: The kerberos client received a KRB_AP_ERR_MODIFIED error from the server host/dc1.domain.com.hk. The target name used was LDAP/ba3f48bc-fa6a-4698-9947-ba8435cbf92b._msdcs.domain.COM.HK.
This indicates that the password used to encrypt the kerberos service ticket is different than that on the target server. Commonly, this is due to identically named machine accounts in the target realm (domain.COM.HK), and the client realm.
Please contact your system administrator.
......................... DC3 failed test systemlog
Test omitted by user request: VerifyReplicas
Starting test: VerifyReferences
The system object reference (serverReference) CN=DC3,OU=Domain Controllers,DC=domain,DC=COM,DC=HK and backlink on
CN=DC3,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=domain,DC=COM,DC=HK are correct.
The system object reference (frsComputerReferenceBL) CN=DC3,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=domain,DC=COM,DC=HK
and backlink on CN=DC3,OU=Domain Controllers,DC=domain,DC=COM,DC=HK are correct.
The system object reference (serverReferenceBL) CN=DC3,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=domain,DC=COM,DC=HK
and backlink on CN=NTDS Settings,CN=DC3,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=domain,DC=COM,DC=HK are correct.
......................... DC3 passed test VerifyReferences
Test omitted by user request: VerifyEnterpriseReferences
Test omitted by user request: CheckSecurityError
Running partition tests on : ForestDnsZones
Starting test: CrossRefValidation
......................... ForestDnsZones passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Running partition tests on : DomainDnsZones
Starting test: CrossRefValidation
......................... DomainDnsZones passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Running partition tests on : Schema
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Running partition tests on : Configuration
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Running partition tests on : domain
Starting test: CrossRefValidation
......................... domain passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... domain passed test CheckSDRefDom
Running enterprise tests on : domain.COM.HK
Starting test: Intersite
Skipping site Default-First-Site-Name, this site is outside the scope provided by the command line arguments provided.
......................... domain.COM.HK passed test Intersite
Starting test: FsmoCheck
Warning: Couldn't verify this server as a GC in this servers AD.
GC Name:
\\dc1.domain.COM.HK
Locator Flags: 0xe00003fd
PDC Name:
\\dc1.domain.COM.HK
Locator Flags: 0xe00003fd
Time Server Name:
\\dc1.domain.COM.HK
Locator Flags: 0xe00003fd
Preferred Time Server Name:
\\dc1.domain.COM.HK
Locator Flags: 0xe00003fd
KDC Name:
\\dc1.domain.COM.HK
Locator Flags: 0xe00003fd
......................... domain.COM.HK passed test FsmoCheck
Test omitted by user request: DNS
Test omitted by user request: DNS -
Upgrading windows server 2003 domain controller to windows server 2008
Hello friedns :
We have a company with about 2000 users , and two windows server 2003 domain controllers , one of them acts as a primary domain controller , and the other acts as secondary domain controller , all the FSMO s are on the primary DC ,we have decided to upgrade all of our servers from windows server 2003 to windows server 2008 , the first step is to upgrade the domain controllers to windows server 2008 , our domain controllers are so sensitive and has to be active 24 hours a day , i have stress upgrading it to windows server 2008 , what is the best solution to upgrade it with no risk ?
( i have an opinion but i am not sure and i dont have any guide about it , i want to install a windows server 2008 and promote it as an additional domain controller to the windows server 2003 DC and the transfer all the FSMOs to it , and then promote the first domain controller !!! is that possible ? if yes , is there any guide about it? )
If there is a guide available for it please let me know . (Specially if there is a tip & trick)
thank you guys.
Network is my LOVEHi,
This TechNet online article might be helpful for you.
How to Upgrade Domain Controllers to Windows Server 2008 or Windows Server 2008 R2
http://technet.microsoft.com/en-us/library/ee522994(WS.10).aspx
For your convenience, I have list some general steps for your reference.
Since the following operation have potential damage to Active Directory database, it is highly suggested that you'd better perform a full backup of Active Directory (System State) firstly. Also it is better to test the following procedure in a similar lab environment first.
General Steps:
=============
1. Verify the new server's TCP/IP configuration has been pointed to the current DNS server.
2. Make the new server become a member server of the current Windows Server 2003 domain first.
3. Upgrade the Windows Server 2003 forest schema to Windows Server 2008 schema with the "adprep /forestprep" command on old server.
Please run the "adprep.exe /forestprep" command from the Windows Server 2008 installation disk on the schema master. To do this, insert the Windows Server 2008 installation disk, and then type the following command:
Drive:\sources\ADPREP\adprep.exe /forestprep
4. Upgrade the Windows 2003 domain schema with the "adprep /domainprep" command on old server.
Please run the "adprep.exe /domainprep" command from the Windows Server 2008 installation disk on the infrastructure master. To do this, insert the Windows Server 2008 installation disk, and then type the following command:
Drive:\sources\ADPREP \adprep.exe /domainprep
5. Insert Windows Server 2008 Installation Disc in the new server.
6. Run "dcpromo" on new server to promote it as an additional domain controller in existing Windows 2003 domain, afterwards you may verify the installation of Active Directory.
Please refer to:
How to Verify an Active Directory Installation in Windows Server 2003
http://support.microsoft.com/kb/816106
7. Verify the new server's TCP/IP configuration has been pointed to current DNS server.
8. Enable Global Catalog on new server and manually Check Replication Topology and afterwards manually trigger replication (Replicate Now) to synchronize Active Directory database between 2 replicas.
Please note: It will some time to replicate GC between DC, please wait some time with patience.
9. Disable Global Catalog on the old DC.
10. Transfer all the FSMO roles from the old DC to the new DC.
Please refer to:
How to view and transfer FSMO roles in Windows Server 2003
http://support.microsoft.com/kb/324801
11. Verify that the old DNS Server Zone type is Active Directory-Integrated. If not, please refer to:
How To: Convert DNS Primary Server to Active Directory Integrated
http://support.microsoft.com/kb/816101
Note: Active Directory Integrated-Zone is available only if DNS server is a domain controller.
12. Install DNS component on new server and configure it as a new DNS Server (Active Directory Integrated-Zone is preferred). All the DNS configuration should be replicated to the new DNS server with Active Directory Replication.
13. Make all the clients change TCP/IP configuration to point to new server as DNS.
14. You may configure TCP/IP on all the clients, or adjust DHCP scope settings to make them use the new DNS server.
Please note: It is a good practice to make the old DC offline for several days and check whether everything works normally with the new server online. If so, you may let the old DC online and run DCPROMO to demote it.
Hope it helps.
Regards,
Wilson Jia
This posting is provided "AS IS" with no warranties, and confers no rights. -
Windows Serve 2003 Paging Issue
Hi All,
We have one windows server 2003 enterprise edition with good CPU power & 24 GB of physical memory.
Since last few days weeks. This server becomes non-responsive with large number of event id 50 & 51. We can't access this system when this happens & someone need to go & hard reboot the system.
Assumes this is something related to memory leak from some application but didn't find the exact trace for that.
Any way to narrow down this trace.
Thanks,
SandeshHi sandeshgawade87,
Did you install the following Hotfix:
Some data is corrupted when cached and noncached I/O operations occur by using the same NTFS file handle
http://support.microsoft.com/kb/981166
From the event ID, it also can caused by the hardware issue, please check your storage hardware related system.
The related KB:
Information about Event ID 51
http://support.microsoft.com/kb/244780
Windows System Event Log Errors that indicate possible I/O problems can be associated with database inconsistency or performance problems for SQL Server
http://support.microsoft.com/kb/2091098
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
KB2991509 Shuns Windows Server 2003
This is interesting. Microsoft recently released KB2991509 to fix a serious performance problem in all versions of IE from 7 to 11 that was caused by a bad security update.
While the original security update was released for Windows Server 2003, KB2991509 does not list a Server 2003 download. I presume this is because Windows Server 2003 is in the "Extended" support phase and this is technically a performance issue.
I think that's a poor interpretation of the support policy. If you release a defective security update that cripples performance, you should release a fix to all operating systems that received the original defective security update regardless of what
phase of support the product is in.
"You break it, you bought it" rules should apply here.Hi,
I understand your feeling about this issue, we will keep an eye on this hotfix and inform you if we got anything new about this.
Regards
Yolanda Zhu
TechNet Community Support -
HP Server g5 windows server 2003 LSI logic Raid 1 rebuild
I am running a HP Server G5 with windows server 2003 we HAD 2 160GB hdd setup with RAID 1... one hard drive died, we replaced the hard drive with another 160GB HDD but cannot figure out how to merge the old data with the new hard drive and create a new RAID 1 setup. We are working with LSI Logic utility that we access during boot. Please Help thanks!
Hi Andrey ,
First , I would suggest you to keep the driver up-to-date for physical NIC .
Then check if the integration service was installed .
Allocate more Vcpu for that VM .
If the issue persists please try to disable "offload" for that VM :
http://blog.nicholasrogoff.com/2010/09/24/windows-2008-r2-hyper-vguests-vms-have-slow-performance-change-you-adapter-settings/
Best Regards
Elton JI
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Hi Elton!
I have already installed
the latest driver for NICs. From here:
Broadcom
The integration service was installed of course.
I added one additional virtual processor per VM. 2012 R2 works better. In 2018 R2 the task manager
freezes
when copying. Load is 100%..
Disabling"offload"
does not help..
Maybe you are looking for
-
Can I send data from a PC to another PC using Data Socket Servers?
I need to send an array to a computer. Both computers use LabVIEW. The computer that writes the information also runs the Data Socket Server. What I want to do is read that array from another computer via internet. So the main issue is: Can I read fr
-
Goods receipt of same serial number
Is it possible for us to receive the same serial number back into the warehouse with MB1C after the serial number has been sent to the customer? We have occasions in the repair process where the same serial number will come back for repair, but the
-
Panasonic Lumex DMC-LX1 raw conversion for Aperture doesn't work.
I've seen many people having raw conversion problems. Direct import of Lumex raw files to Aperture does not work. Adobe DNG conversion of raw to dng does not work. I'm running on Photoshop CS. Perhaps my DNG conversion settings aren't right? Tell me
-
Hi All, I have a scenario, in which there is a possiblity of getting source file to be empty (0 bytes), In this case I need to trigger an email to the user reg the same. Please provide inputs. Regards, Nithiyanandam
-
SQL 2005 Setup on Win7 Ultimate [No SQL Services after installation]
Win 7 Ultimate (64bit) 4GB RAM New installation of Win 7 Ultimate Re-installation of SQL: Originally SQLExpress which didn't work out so I went to SQL2005 Standard Edition SP1 & updated to SQL2005 SP4. I installed Visual Studio 2005 during the SP1 i