Performance issue: stmt.execute() takes a long time when using Oracle objs

Folks,
I have a PL/SQL API that returns a REF CURSOR over an Oracle object that contains other objects. In the JDBC layer, when I do a stmt.execute(), it takes about 1.2s for this statement to run while the execution of the PL/SQL API in the database takes only about 100ms or so. When I connect to a database that is physically located really far away, the delta here increases (perhaps due to the network latency).
I believe it is not as efficient to use Oracle ADTs in conjunction with JDBC. However, not using an Oracle object and replacing that with a bunch of linear arrays is not really an option for me considering the amount of change involved and what a maintenance nightware that would be. At the same time, I need to get this to perform better. Any thoughts?
I suspect that there are a number of network round trips with Oracle objects are involved. If that is infact true, what are my options?
I use Oracle 10g, and the Oracle JDBC thin driver. Thanks.

I have an Oracle object that has say 3 fields - number, number and number_table (indexed table of numbers). Right now, I return a REF CURSOR and do a getObject() in the java layer. But, I want to try and change this so that I return linear arrays (meaning, all these fields are not embedded in an Oracle object). Dont know if that would make things quicker but wanted to check to see if there were other alternatives.
Also, can I define a procedure that returns an OUT parameter which is an indexed table, and then do a registerOutParameter(<index>, OracleTypes.ARRAY)? I tried that but it gives me a PLS-00306 error (wrong number of types of arguments).

Similar Messages

  • I have a ipad 1. I seem to be having a lot of connectivity issues. It takes a long time to load and sometimes will not load a page at all. I seem to be having issues with streaming in that it will play a song and just stop.

    I seem to be having a lot of connectivity issues my iPad. It takes a long time to load and sometimes will not load a page at all. I seem to be having issues with streaming in that it will play a song and just stop. It seems I have to turn it completely off and restart.
    Anyone had these issues?

    Settings > General > Reset > Reset network settings

  • Previewing files takes a long time when trying to attach them

    Whenever i try to preview files while trying to attach them in mail..once the file is selected it takes a long time to preview and hence be attached. First it was a problem with finder taking ages to preview...i sorted this out..but not the mail thing. Even after running disk utility, repairing permissions, cache cleaning and removing the com.apple.mail.plist file ..It didn't work. I started seeing the same problem in adium when I was trying to select a picture from a folder to change my display pic. Fortunately it hasn't happened in word or excel.
    Can anyone help with problem??
    Power Book G4   Mac OS X (10.4.5)   2 GB RAM, 128 MB VRAM

    It's loading the code insight. Since you have such a large number of objects you may want to turn this off.
    sqldeveloper -J-Dsdev.insight=false
    -kris

  • Takes a long time when waiting for plsq: package_name. while editing

    Hallo,
    in APPS-Environment we have over 30.000 Packages. When editing plsql code
    an trying to write a package.function call , sql-developer tries to display the available functions and procedures for the given package after typing the "DOT" and display that. That takes very long. What's happen ?
    Regards
    Uwe

    It's loading the code insight. Since you have such a large number of objects you may want to turn this off.
    sqldeveloper -J-Dsdev.insight=false
    -kris

  • GC taking long time when using Concurrent Mark Sweep GC with Sun JDK 150_12

    We are having problem of Garbage collection taking too long. We are using Weblogic 9.2 and Sun JDK 150_12
    Below are the memory arguments we are using. We are using Concurrent Mark Sweep GC. What we are observing is Young Generation is getting filled up and consequent tenured generation also hangs with long pauses.
    Below are the JVM arguments we are using
    -Xms2560M -Xmx2560M -Xloggc:${LOGDIR}/gc.log -XX:+PrintGCTimeStamps -XX:+PrintGCDetails -XX:+UseParNewGC -XX:+UseConcMarkSweepGC -XX:+CMSParallelRemarkEnabled -XX:SurvivorRatio=128 -XX:MaxTenuringThreshold=0 -XX:CMSInitiatingOccupancyFraction=60 -XX:NewSize=512m -XX:MaxNewSize=512m -XX:MaxPermSize=256m
    I have seen many forums where there are many reported issues with Concurrent Mark Sweep garbage collection with Sun JDK, but with different recommendations. But did not find any defnite recommendation. Please advice.
    - - Tarun

    We are having problem of Garbage collection taking too long. We are using Weblogic 9.2 and Sun JDK 150_12
    Below are the memory arguments we are using. We are using Concurrent Mark Sweep GC. What we are observing is Young Generation is getting filled up and consequent tenured generation also hangs with long pauses.
    Below are the JVM arguments we are using
    -Xms2560M -Xmx2560M -Xloggc:${LOGDIR}/gc.log -XX:+PrintGCTimeStamps -XX:+PrintGCDetails -XX:+UseParNewGC -XX:+UseConcMarkSweepGC -XX:+CMSParallelRemarkEnabled -XX:SurvivorRatio=128 -XX:MaxTenuringThreshold=0 -XX:CMSInitiatingOccupancyFraction=60 -XX:NewSize=512m -XX:MaxNewSize=512m -XX:MaxPermSize=256m
    I have seen many forums where there are many reported issues with Concurrent Mark Sweep garbage collection with Sun JDK, but with different recommendations. But did not find any defnite recommendation. Please advice.
    - - Tarun

  • Report take a long time in table TST03

    Hi,
    Our developpers have done a job to create a spool order to file. Among others, this job run the SAPLSPOX, and SAPLSPOC reports, but  they takes a long time when they read or insert in table TST03.
    The spool order has about 40.000 or 50.000 pages and the job can last 5.000 or 6.000 seconds. Is it normal?. If not what can I do?.
    Regards.

    Do you clean you old spools regularly?
    Note 130978 - RSPO1041 - Replacement for RSPO0041
    Markus

  • Discoverer take a long time executing reports

    Hi
    I have installed Discoverer with Application Server 10g R2 (both). I create my reports from a table but when i want to update my information in the Oracle Portal (executing a discoverer report with parameters) but it take a long time (up 2 or 3 minutes) the query is on one fact table with 4 or 5 FK.
    Somebody has an idea why?
    I have 2 server (one to OAS and another for Discoverer) the first with 1 GB RAM and the 2nd with 2 GB.
    i dont believe that the problem is with my database.
    Thank's a lot

    Hello,
    The issue is the reports are still looking for the original server because that server name is saved in the report file. You'll have to open each report up and do a Set Location to the new report. You'll need the same version of the REport Designer the reports were created in.
    I suggest to call Dynamics and ask them how to update the reports.
    Thank you
    Don

  • Problem description: My  macbook pro since this afteon has been slower, every application I open, it takes a long time to open, and shows the spinning beach ball for a while before it opens or performs some task, or responds to a click-  EtreCheck

    My computer
    Problem description:
    My  macbook pro since this afternoon has been slower, every application I open, it takes a long time to open, and shows the spinning beach ball for a while before it opens or performs some task, or responds to a click…
    EtreCheck version: 2.1.8 (121)
    Report generated 31 de março de 2015 18:29:15 BRT
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (13-inch, Early 2011) (Technical Specifications)
        MacBook Pro - model: MacBookPro8,1
        1 2.3 GHz Intel Core i5 CPU: 2-core
        16 GB RAM Upgradeable
            BANK 0/DIMM0
                8 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                8 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 250
    Video Information: ℹ️
        Intel HD Graphics 3000 - VRAM: 512 MB
            Color LCD 1280 x 800
    System Software: ℹ️
        OS X 10.10.2 (14C1514) - Time since boot: 0:25:47
    Disk Information: ℹ️
        Hitachi HTS545032B9A302 disk0 : (320,07 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) / : 318.84 GB (47.94 GB free) - 51 errors
                Core Storage: disk0s2 319.21 GB Online
        MATSHITADVD-R   UJ-898 
    USB Information: ℹ️
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
        [running]    com.trusteer.rapport.rapportd.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.adobe.SwitchBoard.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
        [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
        [running]    com.trusteer.rooks.rooksd.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [running]    com.spotify.webhelper.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    UNKNOWN Hidden (missing value)
        AdobeResourceSynchronizer    Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
        Stickies    Application  (/Applications/Stickies.app)
    Internet Plug-ins: ℹ️
        JavaAppletPlugin: Version: Java 8 Update 31 Check version
        FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        AdobePDFViewerNPAPI: Version: 10.1.13 [Click for support]
        AdobePDFViewer: Version: 10.1.13 [Click for support]
        Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
        Google Earth Web Plug-in: Version: 7.1 [Click for support]
        Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
        iPhotoPhotocast: Version: 7.0 - SDK 10.8
    User internet Plug-ins: ℹ️
        npsf_cef: Version: sf 3.3.1.1 [Click for support]
        Google Earth Web Plug-in: Version: Unknown
    Safari Extensions: ℹ️
        DivX HiQ
        DivX Plus Web Player HTML5 <video>
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        Java  [Click for support]
        MacFUSE  [Click for support]
        Perian  [Click for support]
        Trusteer Endpoint Protection  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 318.84 GB Disk used: 270.90 GB
        Destinations:
            Time Machine Backups [Local]
            Total size: 999.86 GB
            Total number of backups: 60
            Oldest backup: 2012-07-15 01:16:54 +0000
            Last backup: 2015-03-29 19:28:06 +0000
            Size of backup disk: Excellent
                Backup size 999.86 GB > (Disk size 318.84 GB X 3)
    Top Processes by CPU: ℹ️
            97%    rapportd
             3%    WindowServer
             1%    mds
             0%    fseventsd
             0%    distnoted
    Top Processes by Memory: ℹ️
        155 MB    Safari
        120 MB    Finder
        86 MB    rapportd
        86 MB    WindowServer
        69 MB    mds_stores
    Virtual Memory Information: ℹ️
        12.56 GB    Free RAM
        2.53 GB    Active RAM
        428 MB    Inactive RAM
        1.66 GB    Wired RAM
        1.04 GB    Page-ins
        0 B    Page-outs
    Diagnostics Information: ℹ️
        Mar 31, 2015, 06:00:15 PM    Self test - passed
        Mar 31, 2015, 01:13:05 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-131305_[redacted].crash
        Mar 31, 2015, 01:05:42 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-130542_[redacted].crash
        Mar 31, 2015, 12:24:33 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-122433_[redacted].crash
        Mar 30, 2015, 05:45:38 PM    /Library/Logs/DiagnosticReports/Skype_2015-03-30-174538_[redacted].cpu_resource .diag [Click for details]
        Mar 30, 2015, 01:52:07 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-03-30-135207_[redacted].crash
        Mar 29, 2015, 05:55:05 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-03-29-175505_[redacted].crash
        Mar 29, 2015, 01:06:38 PM    /Library/Logs/DiagnosticReports/VLC_2015-03-29-130638_[redacted].hang
        Mar 29, 2015, 01:02:47 PM    /Library/Logs/DiagnosticReports/VLC_2015-03-29-130247_[redacted].hang

    Open Activity Monitor and kill this process - rapportd.
    Reinstalling OS X Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Reinstalling OS X Without Erasing the Drive
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list.  Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Alternatively, see:
    Reinstall OS X Without Erasing the Drive
    Choose the version you have installed now:
    OS X Yosemite- Reinstall OS X
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • Netflix, HBO Go, ABC Tv app on my apple tv take a long time to download my videos and they are choppy, how can I resolve this issue? My apple TV is running off of WiFi in my apartment.

    Netflix, HBO Go, ABC TV along with other apple TV apps, take a very long time to download the video and they are choppy when running. My apple TV runs off of WiFi in my apartment. When trying to download updates, it take a long time and then a video screen with "This Update was not Successful. Apple TV couldn't be downloaded at this time. Try again later." What can I do to resolve this issue? I purchased this apple TV in May 2013 new.

    That will be an issue with the network
    What is your current connection via speedtest.net?
    Make sure DNS is set to auto (settings - general -network)
    Since you are in an apartment the local wifi network is more prone to interference, try ethernet

  • [Solved] Shutdown/Reboot takes a long time

    I do an upgrade every 5 days or so but it's been a while since I last rebooted--probably around 15-24 days. Since I haven't shutdown/rebooted for a while, I decided to do one today. I noticed that shutdown/reboot takes a long time, around 2-3 minutes whereas before, it would be instant and the behavior seems weird. Upon pressing shutdown or reboot:
    1. Monitors become completely black and searches for a signal (by switching HDMI, DVI, etc). PC still on
    2. After 1 minute, if reboot, I can hear the GPU fans spin like crazy. Shutdown doesn't do this, just quiet.
    3. After waiting another minute, some output shows up really fast and the PC is rebooted or shutdown
    This didn't happen before so I think it's probable that one of the updates did this. Unfortunately, I'm not sure how to tell which one.
    I followed the section "Diagnosing Shutdown Problems" here on how to debug shutdown problems. I've got the systemd shutdown log but I can't tell where the problem is:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.19.3-3-ARCH (builduser@tobias) (gcc version 4.9.2 20150304 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Apr 8 14:10:00 CEST 2015
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=0a8d7720-6c75-4f1e-b2e4-04d8196aa0fb rw quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bea34fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000bea35000-0x00000000bea7dfff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000bea7e000-0x00000000bea85fff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000bea86000-0x00000000bf5f9fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000bf5fa000-0x00000000bf5fbfff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000bf5fc000-0x00000000bf60bfff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000bf60c000-0x00000000bf615fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000bf616000-0x00000000bf63afff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000bf63b000-0x00000000bf67dfff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000bf67e000-0x00000000bf7fffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023f7fffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: MSI MS-7673/P67A-G43 (MS-7673), BIOS V1.11 04/14/2011
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x23f800 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-E7FFF uncachable
    [ 0.000000] E8000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask E00000000 write-back
    [ 0.000000] 1 base 200000000 mask FC0000000 write-back
    [ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable
    [ 0.000000] 3 base 23F800000 mask FFF800000 uncachable
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] 8 disabled
    [ 0.000000] 9 disabled
    [ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
    [ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
    [ 0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000fce60-0x000fce6f] mapped at [ffff8800000fce60]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
    [ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
    [ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x23f600000-0x23f7fffff]
    [ 0.000000] [mem 0x23f600000-0x23f7fffff] page 2M
    [ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x220000000-0x23f5fffff]
    [ 0.000000] [mem 0x220000000-0x23f5fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x200000000-0x21fffffff]
    [ 0.000000] [mem 0x200000000-0x21fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbea34fff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0xbe9fffff] page 2M
    [ 0.000000] [mem 0xbea00000-0xbea34fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xbf5fa000-0xbf5fbfff]
    [ 0.000000] [mem 0xbf5fa000-0xbf5fbfff] page 4k
    [ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0xbf67e000-0xbf7fffff]
    [ 0.000000] [mem 0xbf67e000-0xbf7fffff] page 4k
    [ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
    [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
    [ 0.000000] RAMDISK: [mem 0x3795c000-0x37ca5fff]
    [ 0.000000] ACPI: Early table checksum verification disabled
    [ 0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 ALASKA)
    [ 0.000000] ACPI: XSDT 0x00000000BEA7E068 000054 (v01 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: FACP 0x00000000BEA85148 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: DSDT 0x00000000BEA7E150 006FF4 (v02 ALASKA A M I 00000015 INTL 20051117)
    [ 0.000000] ACPI: FACS 0x00000000BF60DF80 000040
    [ 0.000000] ACPI: APIC 0x00000000BEA85240 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: SSDT 0x00000000BEA852B8 000102 (v01 AMICPU PROC 00000001 MSFT 03000001)
    [ 0.000000] ACPI: MCFG 0x00000000BEA853C0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
    [ 0.000000] ACPI: HPET 0x00000000BEA85400 000038 (v01 ALASKA A M I 01072009 AMI. 00000004)
    [ 0.000000] ACPI: ASF! 0x00000000BEA85438 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023f7fffff]
    [ 0.000000] NODE_DATA(0) allocated [mem 0x23f7f5000-0x23f7f8fff]
    [ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880236e00000-ffff88023edfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x23f7fffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
    [ 0.000000] node 0: [mem 0x00100000-0xbea34fff]
    [ 0.000000] node 0: [mem 0xbf5fa000-0xbf5fbfff]
    [ 0.000000] node 0: [mem 0xbf67e000-0xbf7fffff]
    [ 0.000000] node 0: [mem 0x100000000-0x23f7fffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x23f7fffff]
    [ 0.000000] On node 0 totalpages: 2089813
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 12143 pages used for memmap
    [ 0.000000] DMA32 zone: 777145 pages, LIFO batch:31
    [ 0.000000] Normal zone: 20448 pages used for memmap
    [ 0.000000] Normal zone: 1308672 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
    [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbea35000-0xbea7dfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbea7e000-0xbea85fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbea86000-0xbf5f9fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbf5fc000-0xbf60bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbf60c000-0xbf615fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbf616000-0xbf63afff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbf63b000-0xbf67dfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfeffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
    [ 0.000000] e820: [mem 0xbf800000-0xfed1bfff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88023f400000 s86336 r8192 d32448 u524288
    [ 0.000000] pcpu-alloc: s86336 r8192 d32448 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2057137
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=0a8d7720-6c75-4f1e-b2e4-04d8196aa0fb rw quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
    [ 0.000000] AGP: Checking aperture...
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 8146392K/8359252K available (5534K kernel code, 917K rwdata, 1744K rodata, 1164K init, 1156K bss, 212860K reserved, 0K cma-reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
    [ 0.000000] NR_IRQS:8448 nr_irqs:456 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 3299.649 MHz processor
    [ 0.000020] Calibrating delay loop (skipped), value calculated using timer frequency.. 6601.26 BogoMIPS (lpj=10998830)
    [ 0.000022] pid_max: default: 32768 minimum: 301
    [ 0.000025] ACPI: Core revision 20141107
    [ 0.002006] ACPI: All ACPI Tables successfully acquired
    [ 0.229873] Security Framework initialized
    [ 0.229877] Yama: becoming mindful.
    [ 0.230159] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.231159] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.231602] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.231607] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.231738] Initializing cgroup subsys memory
    [ 0.231741] Initializing cgroup subsys devices
    [ 0.231743] Initializing cgroup subsys freezer
    [ 0.231744] Initializing cgroup subsys net_cls
    [ 0.231745] Initializing cgroup subsys blkio
    [ 0.231759] CPU: Physical Processor ID: 0
    [ 0.231759] CPU: Processor Core ID: 0
    [ 0.231762] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.231764] mce: CPU supports 9 MCE banks
    [ 0.231772] CPU0: Thermal monitoring enabled (TM1)
    [ 0.231778] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
    [ 0.231839] Freeing SMP alternatives memory: 20K (ffffffff81a0a000 - ffffffff81a0f000)
    [ 0.232422] ftrace: allocating 21171 entries in 83 pages
    [ 0.238717] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.271684] smpboot: CPU0: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz (fam: 06, model: 2a, stepping: 07)
    [ 0.271688] TSC deadline timer enabled
    [ 0.271700] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
    [ 0.271711] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
    [ 0.271712] ... version: 3
    [ 0.271712] ... bit width: 48
    [ 0.271713] ... generic registers: 8
    [ 0.271714] ... value mask: 0000ffffffffffff
    [ 0.271714] ... max period: 0000ffffffffffff
    [ 0.271715] ... fixed-purpose events: 3
    [ 0.271715] ... event mask: 00000007000000ff
    [ 0.291699] x86: Booting SMP configuration:
    [ 0.291700] .... node #0, CPUs: #1
    [ 0.304842] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.305029] #2 #3
    [ 0.334799] x86: Booted up 1 node, 4 CPUs
    [ 0.334802] smpboot: Total of 4 processors activated (26407.07 BogoMIPS)
    [ 0.336656] devtmpfs: initialized
    [ 0.338107] PM: Registering ACPI NVS region [mem 0xbea35000-0xbea7dfff] (299008 bytes)
    [ 0.338111] PM: Registering ACPI NVS region [mem 0xbf60c000-0xbf615fff] (40960 bytes)
    [ 0.338111] PM: Registering ACPI NVS region [mem 0xbf63b000-0xbf67dfff] (274432 bytes)
    [ 0.338196] pinctrl core: initialized pinctrl subsystem
    [ 0.338227] RTC time: 18:49:17, date: 04/22/15
    [ 0.338286] NET: Registered protocol family 16
    [ 0.349856] cpuidle: using governor ladder
    [ 0.363177] cpuidle: using governor menu
    [ 0.363192] ACPI: bus type PCI registered
    [ 0.363193] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.363233] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.363234] PCI: not using MMCONFIG
    [ 0.363235] PCI: Using configuration type 1 for base access
    [ 0.376685] ACPI: Added _OSI(Module Device)
    [ 0.376686] ACPI: Added _OSI(Processor Device)
    [ 0.376687] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.376688] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.377668] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.378832] ACPI: Dynamic OEM Table Load:
    [ 0.378835] ACPI: SSDT 0xFFFF880235BFDE40 000084 (v01 AMI CST 00000001 MSFT 03000001)
    [ 0.379146] ACPI: Interpreter enabled
    [ 0.379150] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
    [ 0.379156] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.379157] ACPI: Using IOAPIC for interrupt routing
    [ 0.379168] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.379198] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    [ 0.379380] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.379496] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.381659] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.381662] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.381725] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
    [ 0.381755] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
    [ 0.381757] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
    [ 0.381758] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
    [ 0.381759] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
    [ 0.381932] PCI host bridge to bus 0000:00
    [ 0.381934] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.381935] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
    [ 0.381936] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
    [ 0.381936] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
    [ 0.381937] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.381938] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.381939] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
    [ 0.381940] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
    [ 0.381945] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
    [ 0.381993] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
    [ 0.382014] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.382032] pci 0000:00:01.0: System wakeup disabled by ACPI
    [ 0.382079] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
    [ 0.382098] pci 0000:00:16.0: reg 0x10: [mem 0xfe708000-0xfe70800f 64bit]
    [ 0.382164] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.382218] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
    [ 0.382235] pci 0000:00:1a.0: reg 0x10: [mem 0xfe707000-0xfe7073ff]
    [ 0.382315] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.382339] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 0.382365] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
    [ 0.382378] pci 0000:00:1b.0: reg 0x10: [mem 0xfe700000-0xfe703fff 64bit]
    [ 0.382443] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.382493] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
    [ 0.382628] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.382664] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 0.382689] pci 0000:00:1c.4: [8086:244e] type 01 class 0x060401
    [ 0.382761] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.382787] pci 0000:00:1c.4: System wakeup disabled by ACPI
    [ 0.382810] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
    [ 0.382882] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 0.382908] pci 0000:00:1c.5: System wakeup disabled by ACPI
    [ 0.382932] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
    [ 0.383004] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
    [ 0.383029] pci 0000:00:1c.6: System wakeup disabled by ACPI
    [ 0.383056] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
    [ 0.383074] pci 0000:00:1d.0: reg 0x10: [mem 0xfe706000-0xfe7063ff]
    [ 0.383154] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.383181] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.383206] pci 0000:00:1f.0: [8086:1c46] type 00 class 0x060100
    [ 0.383340] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
    [ 0.383355] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
    [ 0.383361] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
    [ 0.383366] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
    [ 0.383372] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
    [ 0.383378] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
    [ 0.383384] pci 0000:00:1f.2: reg 0x24: [mem 0xfe705000-0xfe7057ff]
    [ 0.383422] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.383461] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
    [ 0.383473] pci 0000:00:1f.3: reg 0x10: [mem 0xfe704000-0xfe7040ff 64bit]
    [ 0.383490] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
    [ 0.383561] pci 0000:01:00.0: [1002:6719] type 00 class 0x030000
    [ 0.383571] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 0.383579] pci 0000:01:00.0: reg 0x18: [mem 0xfe620000-0xfe63ffff 64bit]
    [ 0.383584] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
    [ 0.383593] pci 0000:01:00.0: reg 0x30: [mem 0xfe600000-0xfe61ffff pref]
    [ 0.383621] pci 0000:01:00.0: supports D1 D2
    [ 0.383650] pci 0000:01:00.1: [1002:aa80] type 00 class 0x040300
    [ 0.383660] pci 0000:01:00.1: reg 0x10: [mem 0xfe640000-0xfe643fff 64bit]
    [ 0.383708] pci 0000:01:00.1: supports D1 D2
    [ 0.389829] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.389830] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.389832] pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe6fffff]
    [ 0.389833] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 0.389906] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.389985] pci 0000:03:00.0: [1b21:1080] type 01 class 0x060400
    [ 0.390139] pci 0000:03:00.0: supports D1 D2
    [ 0.390140] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.396493] pci 0000:00:1c.4: PCI bridge to [bus 03-04] (subtractive decode)
    [ 0.396501] pci 0000:00:1c.4: bridge window [io 0x0000-0x03af] (subtractive decode)
    [ 0.396502] pci 0000:00:1c.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
    [ 0.396503] pci 0000:00:1c.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
    [ 0.396504] pci 0000:00:1c.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.396505] pci 0000:00:1c.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.396506] pci 0000:00:1c.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
    [ 0.396507] pci 0000:00:1c.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
    [ 0.396651] pci 0000:03:00.0: PCI bridge to [bus 04]
    [ 0.396745] pci 0000:05:00.0: [1033:0194] type 00 class 0x0c0330
    [ 0.396772] pci 0000:05:00.0: reg 0x10: [mem 0xfe500000-0xfe501fff 64bit]
    [ 0.396910] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
    [ 0.403155] pci 0000:00:1c.5: PCI bridge to [bus 05]
    [ 0.403160] pci 0000:00:1c.5: bridge window [mem 0xfe500000-0xfe5fffff]
    [ 0.403227] pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000
    [ 0.403248] pci 0000:06:00.0: reg 0x10: [io 0xd000-0xd0ff]
    [ 0.403279] pci 0000:06:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
    [ 0.403298] pci 0000:06:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
    [ 0.403403] pci 0000:06:00.0: supports D1 D2
    [ 0.403404] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.409816] pci 0000:00:1c.6: PCI bridge to [bus 06]
    [ 0.409819] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
    [ 0.409826] pci 0000:00:1c.6: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
    [ 0.410049] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    [ 0.410074] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    [ 0.410098] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
    [ 0.410122] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 0.410146] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
    [ 0.410170] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
    [ 0.410194] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    [ 0.410218] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
    [ 0.410250] ACPI: Enabled 3 GPEs in block 00 to 3F
    [ 0.410300] vgaarb: setting as boot device: PCI:0000:01:00.0
    [ 0.410301] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.410302] vgaarb: loaded
    [ 0.410303] vgaarb: bridge control possible 0000:01:00.0
    [ 0.410339] PCI: Using ACPI for IRQ routing
    [ 0.415815] PCI: pci_cache_line_size set to 64 bytes
    [ 0.415855] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
    [ 0.415856] e820: reserve RAM buffer [mem 0xbea35000-0xbfffffff]
    [ 0.415857] e820: reserve RAM buffer [mem 0xbf5fc000-0xbfffffff]
    [ 0.415857] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
    [ 0.415858] e820: reserve RAM buffer [mem 0x23f800000-0x23fffffff]
    [ 0.415918] NetLabel: Initializing
    [ 0.415919] NetLabel: domain hash size = 128
    [ 0.415919] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.415927] NetLabel: unlabeled traffic allowed by default
    [ 0.415940] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.415942] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.417956] Switched to clocksource hpet
    [ 0.420722] pnp: PnP ACPI init
    [ 0.420798] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
    [ 0.420799] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.420800] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 0.420801] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.420802] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
    [ 0.420804] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.420902] system 00:01: [io 0x0a00-0x0a0f] has been reserved
    [ 0.420903] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.420993] pnp 00:02: [dma 0 disabled]
    [ 0.421016] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.421032] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.421058] system 00:04: [io 0x04d0-0x04d1] has been reserved
    [ 0.421059] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.421149] system 00:05: [io 0x0400-0x0453] could not be reserved
    [ 0.421150] system 00:05: [io 0x0458-0x047f] has been reserved
    [ 0.421151] system 00:05: [io 0x1180-0x119f] has been reserved
    [ 0.421152] system 00:05: [io 0x0500-0x057f] has been reserved
    [ 0.421153] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.421154] system 00:05: [mem 0xfec00000-0xfecfffff] could not be reserved
    [ 0.421155] system 00:05: [mem 0xfed08000-0xfed08fff] has been reserved
    [ 0.421157] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
    [ 0.421158] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.421187] system 00:06: [io 0x0454-0x0457] has been reserved
    [ 0.421188] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.421295] pnp: PnP ACPI: found 7 devices
    [ 0.427004] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.427006] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.427007] pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe6fffff]
    [ 0.427009] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 0.427011] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.427026] pci 0000:03:00.0: PCI bridge to [bus 04]
    [ 0.427044] pci 0000:00:1c.4: PCI bridge to [bus 03-04]
    [ 0.427053] pci 0000:00:1c.5: PCI bridge to [bus 05]
    [ 0.427056] pci 0000:00:1c.5: bridge window [mem 0xfe500000-0xfe5fffff]
    [ 0.427063] pci 0000:00:1c.6: PCI bridge to [bus 06]
    [ 0.427064] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
    [ 0.427070] pci 0000:00:1c.6: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
    [ 0.427075] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
    [ 0.427076] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
    [ 0.427077] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
    [ 0.427077] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
    [ 0.427078] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
    [ 0.427079] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
    [ 0.427080] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
    [ 0.427081] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
    [ 0.427082] pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe6fffff]
    [ 0.427083] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 0.427084] pci_bus 0000:03: resource 4 [io 0x0000-0x03af]
    [ 0.427085] pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7]
    [ 0.427086] pci_bus 0000:03: resource 6 [io 0x03b0-0x03df]
    [ 0.427087] pci_bus 0000:03: resource 7 [io 0x0d00-0xffff]
    [ 0.427087] pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff]
    [ 0.427088] pci_bus 0000:03: resource 9 [mem 0x000c0000-0x000dffff]
    [ 0.427089] pci_bus 0000:03: resource 10 [mem 0xc0000000-0xffffffff]
    [ 0.427090] pci_bus 0000:05: resource 1 [mem 0xfe500000-0xfe5fffff]
    [ 0.427091] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
    [ 0.427092] pci_bus 0000:06: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
    [ 0.427107] NET: Registered protocol family 2
    [ 0.427218] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.427305] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.427411] TCP: Hash tables configured (established 65536 bind 65536)
    [ 0.427422] TCP: reno registered
    [ 0.427428] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.427446] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.427479] NET: Registered protocol family 1
    [ 0.427627] pci 0000:01:00.0: Video device with shadowed ROM
    [ 0.427703] PCI: CLS 64 bytes, default 64
    [ 0.427731] Unpacking initramfs...
    [ 0.458276] Freeing initrd memory: 3368K (ffff88003795c000 - ffff880037ca6000)
    [ 0.458282] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.458284] software IO TLB [mem 0xbaa35000-0xbea35000] (64MB) mapped at [ffff8800baa35000-ffff8800bea34fff]
    [ 0.458388] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
    [ 0.458447] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x12
    [ 0.458451] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x12
    [ 0.458455] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x12
    [ 0.458459] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x12
    [ 0.458489] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 0.458503] Scanning for low memory corruption every 60 seconds
    [ 0.458643] futex hash table entries: 1024 (order: 4, 65536 bytes)
    [ 0.458653] Initialise system trusted keyring
    [ 0.458879] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.459596] zpool: loaded
    [ 0.459598] zbud: loaded
    [ 0.459684] VFS: Disk quotas dquot_6.5.2
    [ 0.459702] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.459788] Key type big_key registered
    [ 0.459886] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.459910] io scheduler noop registered
    [ 0.459911] io scheduler deadline registered
    [ 0.459926] io scheduler cfq registered (default)
    [ 0.460230] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.460238] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.460245] vesafb: mode is 1400x1050x32, linelength=5632, pages=0
    [ 0.460245] vesafb: scrolling: redraw
    [ 0.460246] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
    [ 0.460257] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010e80000, using 5824k, total 5824k
    [ 0.507010] Console: switching to colour frame buffer device 175x65
    [ 0.553487] fb0: VESA VGA frame buffer device
    [ 0.553501] intel_idle: MWAIT substates: 0x1120
    [ 0.553502] intel_idle: v0.4 model 0x2A
    [ 0.553502] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.553594] GHES: HEST is not enabled!
    [ 0.553630] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.574150] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
    [ 0.574369] Linux agpgart interface v0.103
    [ 0.574402] rtc_cmos 00:03: RTC can wake from S4
    [ 0.574506] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [ 0.574530] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 0.574537] Intel P-state driver initializing.
    [ 0.574635] ledtrig-cpu: registered to indicate activity on CPUs
    [ 0.575069] TCP: cubic registered
    [ 0.575206] NET: Registered protocol family 10
    [ 0.575527] NET: Registered protocol family 17
    [ 0.576245] Loading compiled-in X.509 certificates
    [ 0.576267] registered taskstats version 1
    [ 0.577040] Magic number: 11:338:848
    [ 0.577156] rtc_cmos 00:03: setting system clock to 2015-04-22 18:49:17 UTC (1429728557)
    [ 0.577255] PM: Hibernation image not present or could not be loaded.
    [ 0.577672] Freeing unused kernel memory: 1164K (ffffffff818e7000 - ffffffff81a0a000)
    [ 0.577674] Write protecting the kernel read-only data: 8192k
    [ 0.578177] Freeing unused kernel memory: 600K (ffff88000156a000 - ffff880001600000)
    [ 0.578369] Freeing unused kernel memory: 304K (ffff8800017b4000 - ffff880001800000)
    [ 0.586926] random: systemd-tmpfile urandom read with 1 bits of entropy available
    [ 0.594161] i8042: PNP: No PS/2 controller found. Probing ports directly.
    [ 0.594538] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.594602] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.596674] ACPI: bus type USB registered
    [ 0.596690] usbcore: registered new interface driver usbfs
    [ 0.596697] usbcore: registered new interface driver hub
    [ 0.596714] usbcore: registered new device driver usb
    [ 0.596929] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.597010] ehci-pci: EHCI PCI platform driver
    [ 0.597090] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 0.597095] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 0.597107] ehci-pci 0000:00:1a.0: debug port 2
    [ 0.598329] SCSI subsystem initialized
    [ 0.600997] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 0.601009] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfe707000
    [ 0.601141] libata version 3.00 loaded.
    [ 0.607823] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 0.607929] hub 1-0:1.0: USB hub found
    [ 0.607934] hub 1-0:1.0: 2 ports detected
    [ 0.608004] xhci_hcd 0000:05:00.0: xHCI Host Controller
    [ 0.608009] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 2
    [ 0.608319] hub 2-0:1.0: USB hub found
    [ 0.608327] hub 2-0:1.0: 2 ports detected
    [ 0.608382] xhci_hcd 0000:05:00.0: xHCI Host Controller
    [ 0.608384] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
    [ 0.608386] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 0.608389] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
    [ 0.608405] ehci-pci 0000:00:1d.0: debug port 2
    [ 0.611688] hub 3-0:1.0: USB hub found
    [ 0.611696] hub 3-0:1.0: 2 ports detected
    [ 0.612303] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 0.612313] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfe706000
    [ 0.621118] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 0.621236] hub 4-0:1.0: USB hub found
    [ 0.621248] hub 4-0:1.0: 2 ports detected
    [ 0.621321] ahci 0000:00:1f.2: version 3.0
    [ 0.634481] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
    [ 0.634487] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
    [ 0.668448] scsi host0: ahci
    [ 0.668750] scsi host1: ahci
    [ 0.669100] scsi host2: ahci
    [ 0.669412] scsi host3: ahci
    [ 0.669697] scsi host4: ahci
    [ 0.669967] scsi host5: ahci
    [ 0.670051] ata1: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705100 irq 30
    [ 0.670054] ata2: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705180 irq 30
    [ 0.670057] ata3: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705200 irq 30
    [ 0.670059] ata4: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705280 irq 30
    [ 0.670061] ata5: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705300 irq 30
    [ 0.670064] ata6: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705380 irq 30
    [ 0.914200] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 0.927545] usb 4-1: new high-speed USB device number 2 using ehci-pci
    [ 0.987472] ata5: SATA link down (SStatus 0 SControl 300)
    [ 0.987497] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 0.987521] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 0.987543] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 0.987563] ata6: SATA link down (SStatus 0 SControl 300)
    [ 0.987584] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 0.987877] ata2.00: supports DRM functions and may not be fully accessible
    [ 0.988115] ata3.00: ATAPI: TSSTcorp CDDVDW SH-S243D, SB00, max UDMA/100
    [ 0.988210] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
    [ 0.988214] ata1.00: ATA-9: Samsung SSD 840 Series, DXT07B0Q, max UDMA/133
    [ 0.988217] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 0.988682] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
    [ 0.988746] ata1.00: configured for UDMA/133
    [ 0.988881] ata3.00: configured for UDMA/100
    [ 0.989027] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 7B0Q PQ: 0 ANSI: 5
    [ 0.989649] ata4.00: ATA-8: WDC WD1002FAEX-00Z3A0, 05.01D05, max UDMA/133
    [ 0.989653] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 0.990752] ata2.00: disabling queued TRIM support
    [ 0.990755] ata2.00: ATA-9: Crucial_CT240M500SSD1, MU05, max UDMA/133
    [ 0.990757] ata2.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 0.992466] ata4.00: configured for UDMA/133
    [ 0.994299] ata2.00: supports DRM functions and may not be fully accessible
    [ 0.997177] ata2.00: disabling queued TRIM support
    [ 1.000401] ata2.00: configured for UDMA/133
    [ 1.000669] scsi 1:0:0:0: Direct-Access ATA Crucial_CT240M50 MU05 PQ: 0 ANSI: 5
    [ 1.001813] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S243D SB00 PQ: 0 ANSI: 5
    [ 1.011521] scsi 3:0:0:0: Direct-Access ATA WDC WD1002FAEX-0 1D05 PQ: 0 ANSI: 5
    [ 1.015296] ata1.00: Enabling discard_zeroes_data
    [ 1.015310] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
    [ 1.015364] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.015367] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.015385] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.015513] sd 1:0:0:0: [sdb] 468862128 512-byte logical blocks: (240 GB/223 GiB)
    [ 1.015517] sd 1:0:0:0: [sdb] 4096-byte physical blocks
    [ 1.015524] ata1.00: Enabling discard_zeroes_data
    [ 1.015532] sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [ 1.015618] sd 3:0:0:0: [sdc] Write Protect is off
    [ 1.015621] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
    [ 1.015636] sd 1:0:0:0: [sdb] Write Protect is off
    [ 1.015641] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 1.015657] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.015717] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.015779] sda: sda1 sda2
    [ 1.016099] ata1.00: Enabling discard_zeroes_data
    [ 1.016176] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.016225] sdb: sdb1
    [ 1.016696] sd 1:0:0:0: [sdb] Attached SCSI disk
    [ 1.022237] sdc: sdc1 sdc2
    [ 1.022726] sd 3:0:0:0: [sdc] Attached SCSI disk
    [ 1.025940] sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 1.025945] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 1.026137] sr 2:0:0:0: Attached scsi CD-ROM sr0
    [ 1.038098] hub 1-1:1.0: USB hub found
    [ 1.038285] hub 1-1:1.0: 6 ports detected
    [ 1.051455] hub 4-1:1.0: USB hub found
    [ 1.051648] hub 4-1:1.0: 8 ports detected
    [ 1.298000] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
    [ 1.303924] usb 1-1.4: new high-speed USB device number 3 using ehci-pci
    [ 1.317239] usb 4-1.2: new full-speed USB device number 3 using ehci-pci
    [ 1.443336] systemd[1]: systemd 219 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
    [ 1.443537] systemd[1]: Detected architecture 'x86-64'.
    [ 1.443740] systemd[1]: Set hostname to <arch>.
    [ 1.460317] tsc: Refined TSC clocksource calibration: 3300.020 MHz
    [ 1.473794] usb 1-1.5: new high-speed USB device number 4 using ehci-pci
    [ 1.497743] systemd[1]: Unit type .busname is not supported on this system.
    [ 1.537625] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 1.537643] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 1.537662] systemd[1]: Reached target Remote File Systems.
    [ 1.537672] systemd[1]: Starting Remote File Systems.
    [ 1.537692] systemd[1]: Reached target Encrypted Volumes.
    [ 1.537701] systemd[1]: Starting Encrypted Volumes.
    [ 1.537748] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 1.537759] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 1.537800] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 1.537810] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 1.538002] systemd[1]: Created slice Root Slice.
    [ 1.538014] systemd[1]: Starting Root Slice.
    [ 1.538060] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 1.538070] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 1.538120] systemd[1]: Listening on Journal Socket.
    [ 1.538134] systemd[1]: Starting Journal Socket.
    [ 1.538265] systemd[1]: Created slice User and Session Slice.
    [ 1.538276] systemd[1]: Starting User and Session Slice.
    [ 1.545589] systemd[1]: Listening on Journal Audit Socket.
    [ 1.545747] systemd[1]: Created slice System Slice.
    [ 1.545765] systemd[1]: Starting System Slice.
    [ 1.546248] systemd[1]: Mounting Huge Pages File System...
    [ 1.546789] systemd[1]: Mounting Debug File System...
    [ 1.546970] systemd[1]: Created slice system-dhcpcd.slice.
    [ 1.546987] systemd[1]: Starting system-dhcpcd.slice.
    [ 1.547561] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [ 1.548678] systemd[1]: Starting Setup Virtual Console...
    [ 1.549285] systemd[1]: Started Set Up Additional Binary Formats.
    [ 1.550613] systemd[1]: Starting Load Kernel Modules...
    [ 1.550645] systemd[1]: Started File System Check on Root Device.
    [ 1.551159] systemd[1]: Starting Remount Root and Kernel File Systems...
    [ 1.551679] systemd[1]: Mounting POSIX Message Queue File System...
    [ 1.551836] systemd[1]: Created slice system-getty.slice.
    [ 1.551850] systemd[1]: Starting system-getty.slice.
    [ 1.551870] systemd[1]: Reached target Slices.
    [ 1.551883] systemd[1]: Starting Slices.
    [ 1.551931] systemd[1]: Listening on udev Kernel Socket.
    [ 1.551941] systemd[1]: Starting udev Kernel Socket.
    [ 1.551986] systemd[1]: Listening on Journal Socket (/dev/log).
    [ 1.551997] systemd[1]: Starting Journal Socket (/dev/log).
    [ 1.552492] systemd[1]: Starting Journal Service...
    [ 1.552545] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 1.552561] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 1.552600] systemd[1]: Listening on udev Control Socket.
    [ 1.552611] systemd[1]: Starting udev Control Socket.
    [ 1.552659] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 1.552669] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 1.552689] systemd[1]: Reached target Login Prompts.
    [ 1.552701] systemd[1]: Starting Login Prompts.
    [ 1.553185] systemd[1]: Starting udev Coldplug all Devices...
    [ 1.553231] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 1.553249] systemd[1]: Starting Delayed Shutdown Socket.
    [ 1.554439] EXT4-fs (sdb1): re-mounted. Opts: data=ordered
    [ 1.555736] systemd[1]: Mounting Temporary Directory...
    [ 1.556329] systemd[1]: Mounted POSIX Message Queue File System.
    [ 1.556363] systemd[1]: Mounted Huge Pages File System.
    [ 1.556388] systemd[1]: Mounted Debug File System.
    [ 1.556779] systemd[1]: Started Create list of required static device nodes for the current kernel.
    [ 1.557030] systemd[1]: Started Setup Virtual Console.
    [ 1.557256] systemd[1]: Started Remount Root and Kernel File Systems.
    [ 1.557431] systemd[1]: Mounted Temporary Directory.
    [ 1.558591] hub 1-1.5:1.0: USB hub found
    [ 1.558901] hub 1-1.5:1.0: 4 ports detected
    [ 1.560366] vboxdrv: Found 4 processor cores.
    [ 1.561065] vboxdrv: fAsync=0 offMin=0x2ca offMax=0x6c0c
    [ 1.561137] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
    [ 1.561139] vboxdrv: Successfully loaded version 4.3.26_OSE (interface 0x001a000a).
    [ 1.561712] systemd[1]: Started Load Kernel Modules.
    [ 1.568012] systemd-journald[149]: Failed to set file attributes: Inappropriate ioctl for device
    [ 1.569830] systemd[1]: Started udev Coldplug all Devices.
    [ 1.575918] systemd[1]: Mounted FUSE Control File System.
    [ 1.576374] systemd[1]: Mounting Configuration File System...
    [ 1.576805] systemd[1]: Starting Apply Kernel Variables...
    [ 1.576856] systemd[1]: Started Rebuild Dynamic Linker Cache.
    [ 1.582712] systemd[1]: Started Rebuild Hardware Database.
    [ 1.582739] systemd[1]: Started First Boot Wizard.
    [ 1.582757] systemd[1]: Started Create System Users.
    [ 1.583212] systemd[1]: Starting Load/Save Random Seed...
    [ 1.583784] systemd[1]: Starting Create Static Device Nodes in /dev...
    [ 1.584599] systemd[1]: Mounted Configuration File System.
    [ 1.587256] systemd[1]: Started Load/Save Random Seed.
    [ 1.589801] systemd[1]: Started Apply Kernel Variables.
    [ 1.607967] systemd[1]: Started Create Static Device Nodes in /dev.
    [ 1.608452] systemd[1]: Starting udev Kernel Device Manager...
    [ 1.608476] systemd[1]: Reached target Local File Systems (Pre).
    [ 1.608492] systemd[1]: Starting Local File Systems (Pre).
    [ 1.626961] usb 1-1.6: new low-speed USB device number 5 using ehci-pci
    [ 1.637443] systemd[1]: Started udev Kernel Device Manager.
    [ 1.649393] systemd[1]: Started Journal Service.
    [ 1.653641] systemd-journald[149]: Received request to flush runtime journal from PID 1
    [ 1.813303] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
    [ 1.813310] ACPI: Power Button [PWRB]
    [ 1.813368] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 1.813371] ACPI: Power Button [PWRF]
    [ 1.817850] wmi: Mapper loaded
    [ 1.855141] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 1.872038] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 1.872046] r8169 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 1.877249] r8169 0000:06:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000c7a000, 8c:89:a5:16:c4:7d, XID 0c900800 IRQ 32
    [ 1.877252] r8169 0000:06:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [ 1.880259] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
    [ 1.907839] [drm] Initialized drm 1.1.0 20060810
    [ 1.910066] input: PC Speaker as /devices/platform/pcspkr/input/input5
    [ 1.911296] hidraw: raw HID events driver (C) Jiri Kosina
    [ 1.912890] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
    [ 1.913064] fuse init (API version 7.23)
    [ 1.914070] usblp 1-1.4:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x024A
    [ 1.914093] usbcore: registered new interface driver usblp
    [ 1.916048] AVX version of gcm_enc/dec engaged.
    [ 1.916050] AES CTR mode by8 optimization enabled
    [ 1.924639] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input6
    [ 1.925198] usbcore: registered new interface driver usbhid
    [ 1.925200] usbhid: USB HID core driver
    [ 1.926129] sound hdaudioC0D1: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
    [ 1.926132] sound hdaudioC0D1: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [ 1.926133] sound hdaudioC0D1: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
    [ 1.926134] sound hdaudioC0D1: mono: mono_out=0x0
    [ 1.926136] sound hdaudioC0D1: dig-out=0x11/0x1e
    [ 1.926137] sound hdaudioC0D1: inputs:
    [ 1.926139] sound hdaudioC0D1: Front Mic=0x19
    [ 1.926140] sound hdaudioC0D1: Rear Mic=0x18
    [ 1.926142] sound hdaudioC0D1: Line=0x1a
    [ 1.934672] iTCO_vendor_support: vendor-support=0
    [ 1.934826] [drm] radeon kernel modesetting enabled.
    [ 1.935110] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
    [ 1.935141] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
    [ 1.935229] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 1.939587] r8169 0000:06:00.0 enp6s0: renamed from eth0
    [ 1.939661] gpio_ich: GPIO from 436 to 511 on gpio_ich
    [ 1.941371] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input2
    [ 1.941824] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
    [ 1.941825] AMD IOMMUv2 functionality not available on this system
    [ 1.943447] CRAT table not found
    [ 1.943449] Finished initializing topology ret=0
    [ 1.943479] kfd kfd: Initialized module
    [ 1.943669] checking generic (c0000000 5b0000) vs hw (c0000000 10000000)
    [ 1.943670] fb: switching to radeondrmfb from VESA VGA
    [ 1.943685] Console: switching to colour dummy device 80x25
    [ 1.943797] random: nonblocking pool is initialized
    [ 1.943880] [drm] initializing kernel modesetting (CAYMAN 0x1002:0x6719 0x1787:0x2307).
    [ 1.943890] [drm] register mmio base: 0xFE620000
    [ 1.943891] [drm] register mmio size: 131072
    [ 1.943923] ATOM BIOS: CAYMAN
    [ 1.943974] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
    [ 1.943975] radeon 0000:01:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF
    [ 1.943977] [drm] Detected VRAM RAM=2048M, BAR=256M
    [ 1.943977] [drm] RAM width 256bits DDR
    [ 1.944037] [TTM] Zone kernel: Available graphics memory: 4075924 kiB
    [ 1.944038] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
    [ 1.944039] [TTM] Initializing pool allocator
    [ 1.944043] [TTM] Initializing DMA pool allocator
    [ 1.944058] [drm] radeon: 2048M of VRAM memory ready
    [ 1.944059] [drm] radeon: 1024M of GTT memory ready.
    [ 1.944068] [drm] Loading CAYMAN Microcode
    [ 1.946470] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    [ 1.946562] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [ 1.946609] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [ 1.946674] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    [ 1.946720] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
    [ 1.946769] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
    [ 1.946769] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
    [ 1.946809] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
    [ 1.946849] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
    [ 1.951281] [drm] Internal thermal controller with fan control
    [ 1.955166] [drm] radeon: dpm initialized
    [ 1.955974] [drm] GART: num cpu pages 262144, num gpu pages 262144
    [ 1.956619] input: Lite-On Technology Corp. Goldtouch USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/0003:04CA:005B.0004/input/input15
    [ 1.957600] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
    [ 1.957733] intel_rapl: Found RAPL domain package
    [ 1.957736] intel_rapl: Found RAPL domain core
    [ 1.978933] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
    [ 1.979020] radeon 0000:01:00.0: WB enabled
    [ 1.979022] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff880234d8bc00
    [ 1.979798] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90010f32118
    [ 1.979800] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff880234d8bc04
    [ 1.979801] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff880234d8bc08
    [ 1.979802] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff880234d8bc0c
    [ 1.979804] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff880234d8bc10
    [ 1.979805] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 1.979806] [drm] Driver supports precise vblank timestamp query.
    [ 1.979807] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
    [ 1.979844] radeon 0000:01:00.0: radeon: using MSI.
    [ 1.980067] [drm] radeon: irq initialized.
    [ 1.998991] [drm] ring test on 0 succeeded in 2 usecs
    [ 1.998999] [drm] ring test on 3 succeeded in 4 usecs
    [ 1.999006] [drm] ring test on 4 succeeded in 4 usecs
    [ 2.010399] hid-generic 0003:04CA:005B.0004: input,hidraw1: USB HID v1.10 Keyboard [Lite-On Technology Corp. Goldtouch USB Keyboard] on usb-0000:00:1a.0-1.6/input0
    [ 2.012308] input: Lite-On Technology Corp. Goldtouch USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:04CA:005B.0005/input/input16
    [ 2.069928] input: Logitech M570 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.2/4-1.2:1.2/0003:046D:C52B.0003/0003:046D:1028.0006/input/input17
    [ 2.080530] Adding 4194300k swap on /mnt/LinuxStorage/swap. Priority:-1 extents:4 across:4464636k FS
    [ 2.116506] hid-generic 0003:04CA:005B.0005: input,hiddev0,hidraw2: USB HID v1.10 Device [Lite-On Technology Corp. Goldtouch USB Keyboard] on usb-0000:00:1a.0-1.6/input1
    [ 2.116542] logitech-hidpp-device 0003:046D:1028.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech M570] on usb-0000:00:1d.0-1.2:1
    [ 2.118008] mousedev: PS/2 mouse device common for all mice
    [ 2.175912] [drm] ring test on 5 succeeded in 2 usecs
    [ 2.175917] [drm] UVD initialized successfully.
    [ 2.176481] [drm] ib test on ring 0 succeeded in 0 usecs
    [ 2.176922] [drm] ib test on ring 3 succeeded in 0 usecs
    [ 2.177365] [drm] ib test on ring 4 succeeded in 0 usecs
    [ 2.328709] [drm] ib test on ring 5 succeeded
    [ 2.329264] [drm] Radeon Display Connectors
    [ 2.329265] [drm] Connector 0:
    [ 2.329266] [drm] DP-1
    [ 2.329267] [drm] HPD5
    [ 2.329268] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
    [ 2.329268] [drm] Encoders:
    [ 2.329269] [drm] DFP1: INTERNAL_UNIPHY2
    [ 2.329269] [drm] Connector 1:
    [ 2.329270] [drm] DP-2
    [ 2.329270] [drm] HPD4
    [ 2.329271] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
    [ 2.329271] [drm] Encoders:
    [ 2.329272] [drm] DFP2: INTERNAL_UNIPHY2
    [ 2.329272] [drm] Connector 2:
    [ 2.329273] [drm] HDMI-A-1
    [ 2.329273] [drm] HPD6
    [ 2.329274] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
    [ 2.329274] [drm] Encoders:
    [ 2.329275] [drm] DFP3: INTERNAL_UNIPHY1
    [ 2.329275] [drm] Connector 3:
    [ 2.329276] [drm] DVI-D-1
    [ 2.329276] [drm] HPD1
    [ 2.329277] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
    [ 2.329277] [drm] Encoders:
    [ 2.329278] [drm] DFP4: INTERNAL_UNIPHY1
    [ 2.329278] [drm] Connector 4:
    [ 2.329279] [drm] DVI-I-1
    [ 2.329279] [drm] HPD3
    [ 2.329280] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
    [ 2.329280] [drm] Encoders:
    [ 2.329281] [drm] DFP5: INTERNAL_UNIPHY
    [ 2.329282] [drm] CRT1: INTERNAL_KLDSCP_DAC1
    [ 2.408814] [drm] fb mappable at 0xC0475000
    [ 2.408816] [drm] vram apper at 0xC0000000
    [ 2.408816] [drm] size 8294400
    [ 2.408817] [drm] fb depth is 24
    [ 2.408818] [drm] pitch is 7680
    [ 2.408899] fbcon: radeondrmfb (fb0) is primary device
    [ 2.435470] Console: switching to colour frame buffer device 240x67
    [ 2.438497] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
    [ 2.438498] radeon 0000:01:00.0: registered panic notifier
    [ 2.449565] [drm] Initialized radeon 2.40.0 20080528 for 0000:01:00.0 on minor 0
    [ 2.459456] Switched to clocksource tsc
    [ 2.490495] cfg80211: Calling CRDA to update world regulatory domain
    [ 2.687833] r8169 0000:06:00.0 enp6s0: link down
    [ 2.687846] r8169 0000:06:00.0 enp6s0: link down
    [ 2.687870] IPv6: ADDRCONF(NETDEV_UP): enp6s0: link is not ready
    [ 20.764979] r8169 0000:06:00.0 enp6s0: link up
    [ 20.764992] IPv6: ADDRCONF(NETDEV_CHANGE): enp6s0: link becomes ready
    [ 256.173829] device-mapper: uevent: version 1.0.3
    [ 256.173991] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: [email protected]
    [ 256.713510] SGI XFS with ACLs, security attributes, realtime, no debug enabled
    [ 256.718933] JFS: nTxBlock = 8192, nTxLock = 65536
    [ 256.730155] ntfs: driver 2.1.31 [Flags: R/W MODULE].
    [ 256.800019] raid6: sse2x1 7801 MB/s
    [ 256.856622] raid6: sse2x2 11630 MB/s
    [ 256.913233] raid6: sse2x4 15648 MB/s
    [ 256.913234] raid6: using algorithm sse2x4 (15648 MB/s)
    [ 256.913235] raid6: using ssse3x2 recovery algorithm
    [ 256.913829] xor: automatically using best checksumming function:
    [ 256.946535] avx : 32756.400 MB/sec
    [ 256.954986] Btrfs loaded
    [ 603.210136] watchdog watchdog0: watchdog did not stop!
    [ 603.211033] systemd-shutdown[1]: Sending SIGTERM to remaining processes...
    [ 603.244960] systemd-journald[149]: Received SIGTERM from PID 1 (systemd-shutdow).
    [ 603.321496] systemd-shutdown[1]: Sending SIGKILL to remaining processes...
    [ 603.325328] systemd-shutdown[1]: Hardware watchdog 'iTCO_wdt', version 0
    [ 603.325462] systemd-shutdown[1]: Unmounting file systems.
    [ 603.393079] EXT4-fs (sdb1): re-mounted. Opts: (null)
    [ 603.402416] EXT4-fs (sdb1): re-mounted. Opts: (null)
    [ 603.402433] systemd-shutdown[1]: All filesystems unmounted.
    [ 603.402438] systemd-shutdown[1]: Deactivating swaps.
    [ 603.402507] systemd-shutdown[1]: All swaps deactivated.
    [ 603.402511] systemd-shutdown[1]: Detaching loop devices.
    [ 603.403097] systemd-shutdown[1]: All loop devices detached.
    [ 603.403101] systemd-shutdown[1]: Detaching DM devices.
    [ 603.403156] systemd-shutdown[1]: All DM devices detached.
    [ 603.412388] EXT4-fs (sdb1): re-mounted. Opts: data=ordered
    Would appreciate some input regarding this. Thanks!
    EDIT: This is on gnome 3.16. Not sure if that matters.
    Last edited by devrepublic (2015-05-13 03:24:19)

    ksu wrote:Thanks alot for the input guys. Since I want to start from scratch anyways I'll definitively dig deeper into the subject. BTRFS snapshot feature and RAID1 by simply mirroring two partitions sound awesome, and the subvolume feature seems to be exactly what I need for my USB setup, giving me alot of flexibility. But if there are really that many reports of random data loss then I'll also do some research into that direction to see what this is all about. I admit I'm a linux noob, but it's a lot of fun to learn all this stuff.
    Be sure to read this: https://btrfs.wiki.kernel.org/index.php/Gotchas
    From my own experience, I can say that:
    1. I've never had an issue nor data loss with BTRFS RAID1 root partition on a single disk (other than the first issue on the above list).
    2. I had recurring problems with BTRFS RAID1 non-root partition on a single disk not being able to mount (had to reboot random number of times to get it to mount). However, I suspect this was caused not just by BTRFS but the combination of BTRFS+LVM+dmcrypt which is a rather complex and unusual setup. I had somewhat similar issue with ZFS.
    3. I had BTRFS checkdisk report strange, non-critical, unfixable errors on my non-raid BTRFS root partition, but it never corrupted or lost any data. I simply copied the data to another partition, recreated the root partition and all was fine again.
    4. The last time I lost data on a single partition because of BTRFS was 17 months ago. The last time BTRFS snapshot saved me from losing data was yesterday.
    5. I migrated from BTRFS to ZFS for my backup server and will possibly do so for my work machines. ZFS is more elegant, mature and I have seen no complaints of losing data because of it. However, ZFS is complicated and somewhat restrictive to setup for a data partition, and many times more difficult to setup as root partition. I would not consider it for a non-permanent USB installation.
    6. What we committed here is a massive thread hijacking.
    Last edited by Lockheed (2015-04-24 05:27:51)

  • Query takes a long time on EBAN table

    Hi,
    I am trying to execute a simple select statement on EBAN table. This query takes unexpectionally longer time to execute.
    Query is :
    SELECT banfn bnfpo ernam badat ebeln ebelp
          INTO TABLE gt_eban
          FROM eban FOR ALL ENTRIES IN gt_ekko_ekpo
          WHERE
          banfn IN s_banfn AND
          ernam IN s_ernam
          and ebeln = gt_ekko_ekpo-ebeln AND
          ebelp = gt_ekko_ekpo-ebelp.
    Structure of gt_ekko_ekpo
    TYPES : BEGIN OF ty_ekko_ekpo,
            ebeln TYPE ekko-ebeln,
            ebelp TYPE ekpo-ebelp,
            bukrs TYPE ekko-bukrs,
            aedat TYPE ekko-aedat,
            lifnr TYPE ekko-lifnr,
            ekorg TYPE ekko-ekorg,
            ekgrp TYPE ekko-ekgrp,
            waers TYPE ekko-waers,
            bedat TYPE ekko-bedat,
            otb_value TYPE ekko-otb_value,
            otb_res_value TYPE ekko-otb_res_value,
            matnr TYPE ekpo-matnr,
            werks TYPE ekpo-werks,
            matkl TYPE ekpo-matkl,
            elikz TYPE ekpo-elikz,
            wepos TYPE ekpo-wepos,
            emlif TYPE ekpo-emlif,
      END OF ty_ekko_ekpo.
    Structure of GT_EBAN
    TYPES : BEGIN OF ty_eban,
      banfn TYPE eban-banfn,
      bnfpo TYPE eban-bnfpo,
      ernam TYPE eban-ernam,
      badat TYPE eban-badat,
      ebeln TYPE eban-ebeln,
      ebelp TYPE eban-ebelp,
      END OF ty_eban.
    Query seems to be OK to me. But still am not able to figure out the reason for this performance issue.
    Please provide your inputs.
    Thanks.
    Richa

    Hi Richa,
    Maybe you are executing the query with S_BANFN empty. Still based on the note 191492 you should change your query on like the following
    1st Suggestion:
    if gt_ekko_ekpo[] is not initial.
    SELECT banfn banfpo       INTO TABLE gt_eket
          FROM eket FOR ALL ENTRIES IN gt_ekko_ekpo
          WHERE
         ebeln = gt_ekko_ekpo-ebeln AND
          ebelp = gt_ekko_ekpo-ebelp.
    if sy-subrc = 0.
    delete gt_eket where banfn not in s_banfn.
    if gt_eket[] is not initial
    SELECT banfn bnfpo ernam badat ebeln ebelp
          INTO TABLE gt_eban
          FROM eban FOR ALL ENTRIES IN gt_eket
          WHERE
          banfn = gt_eket-banfn
         and  banfpo = gt_eket-banfpo.
    if sy-subrc = 0.
      delete gt_eban where ernam not in s_ernam.
    endif.
    endif.
    endif.
    endif.
    2nd Suggestion:
    if gt_ekko_ekpo[] is not initial.
    SELECT banfn banfpo       INTO TABLE gt_eket
          FROM eket FOR ALL ENTRIES IN gt_ekko_ekpo
          WHERE
         ebeln = gt_ekko_ekpo-ebeln AND
          ebelp = gt_ekko_ekpo-ebelp.
    if sy-subrc = 0.
    delete gt_eket where banfn not in s_banfn.
    if gt_eket[] is not initial
    SELECT banfn bnfpo ernam badat ebeln ebelp
          INTO TABLE gt_eban
          FROM eban FOR ALL ENTRIES IN gt_eket
          WHERE
          banfn = gt_eket-banfn
         and  banfpo = gt_eket-banfpo
         and ernam in s_ernam.
    endif.
    endif.
    endif.
    Hope this helps.
    Regards,
    R

  • AP Trial Balance - File is massive and takes a long time to open up

    Hello,
    We are upgrading from 11.5.10 to 12.1.3 and are running into some serioud problems with the Accounts Payables Trial Balance report in Detail Mode.
    1. The Report takes upwards of 10 minutes to open up - and in many cases does not.
    2. On further research we see that the report output file is > 500MB whereas comparable 11i Trial Balance files are only 19MB.
    3. We tried running in various formats Text, PDF, HTML with no luck.
    4. In fact HTML and Text formats gave “Authentication failed” errors when we tried to open the report.
    My questions are:
    1. Why is there a such a large increase in file size? Is this expected going to R12?
    2. Is there a way to speed up the opening of the large files or create smaller files? - (summary mode, and smaller date ranges are not options as per business needs). Even a 2 month date range give the same problems.
    3. We noticed that the XLA_TRIAL_BALANCES table has 36,521,125 records...LARGE.
    4. We compared the ap_liability_balance records between 11i and R12. We have 29,171,382 in 11i and 37,769,034 in R12. But this is expected as we purge regularly in 11i production and I don't think this difference (about 30%) in the size of the tables should cause such a large difference in the size of the report files (nearly 2000%!!!).
    5. Why are we getting Authentication failed errors? Just for these reports?
    Of course we opened an SR, but you know how SRs go :-) and this is a time critical project with our deadlines nearing.
    Any help or pointers from the experts here is greatly appreciated.
    Thanks
    Edited by: user11992646 on Jan 27, 2012 2:12 AM

    Hi Hussein,
    Thanks for your prompt reply and my apologies for the substantial delay in mine.
    We did some trouble shooting since then.
    We repolved the problem by choosing a pdf format instead of the seeded RTF format. This opened up the output in a couple of minutes because the pdf formatted output was about 50mb vs the RTF output which was 300MB+.
    But the ORIGINAL problem still remains. The xml tagged .out file is still huge with a size of nearly 1gb!
    My earlier questions here now boil down to the following questions.
    Q1. Is the huge XML Publisher's .out file expected in R12?  It really is massive!  The text file from 11i was just 19MB
    Q2. Oracle does not seem to offer the option to format the output in plain text ...We see PDF, RTF but no plain ugly text.  I would expect plain text file to be much smaller.  How can we get the output in plain text?
    1.Yes our stats are upto date. Let me emphasize that we do not have a performance problem with the report itself. The issue we are having is opening up the output.
    2. The authentication error is resolved. It was because of formatting the reports incorrectly.
    3. We did not use the usual tuning procedures such as tkprof because we do not have a performance problem.
    4. We checked the OPP file and there are none. I reiterate, The report does complete without issues. It is just that the output takes a long time to open up in the RTF
    I will appreciate if others  can share any experiences if you have faced this situation and how you have handled it.
    Thanks in advance for your time!

  • F4 Process takes a long time to show the values

    Hi gurus,
    We are facing an issue with the InfoObject Sup. Company Code 0COMP_CODE, this characteristic has 200 enties in the Master Data, and 10000 values in the SID table.
    This infoObject is being used in a Query (3.X version) and when we press the F4 to obtain the values, it takes a long time to show them.
    The query takes data from a Multiprovider, and the multiprovider only has one Cube.
    The issue is happening with a lot of query (obviosly, with the same object), and there is no reason to do it I think, because the amount of records is not too much (10 K rec).
    So, what do you think is happening? all your help will be helpfull.
    Regards, Federico

    Frederico / Rob,
    setting the InfoObject property of 'Query execution filter value selection' to 'values in master data table' has the consequence that it is indeed faster on the query selection screen, but then when selecting filter values after the report has been displayed is not restricted to the values in the report results - again all master data values are shown for selection. This is not acceptable to our users.
    Ideally, I would like to see two settings for query execution - master data for the initial selection screen, only posted values for navigation after the query has been executed. But I doubt that's going to happen.
    In BW3.5 I seem to remember that you can set the choice of F4 display within the web template (can't in BI7).
    NB for BI7 Java execution, examine the 'order for F4 help' on the InfoObject attributes and remove most of SAP's default settings. This will speed things up a little.
    David

  • Suddenly it takes a long time to check in projects

    Hi, we've been using Project Online for a while. The performance has never been great but at least acceptable. However, starting from yesterday, it suddenly takes a very long time to check in a project (more than 10 minutes). This happens to all projects,
    newly created or existing one. Any ideas? The projects are not large. Each project as about 30 tasks, and only one user is using Project Online at the moment. We have about 20 projects in all.
    Similarly, it suddenly takes a long time to launch a provider hosted app. The time is spent in redirecting. Once redirecting finishes, the provider hosted app opens very quickly. As a test, I tried to open the provider hosted app's URL directly without redirecting
    from SharePoint, and it opened instantly.
    Other features are still working fine, although a bit slower than usual. For example, it takes about 20 seconds to save a project, but at least it works.
    The only thing I've done is to add an additional custom fields to project. We already have about 20 custom fields. I understand it is recommended to keep the number of custom fields small for tasks, but our custom fields are mainly on the project level.
    I don't have any inkling on what might be going on...
    Shining Oh Blue Star

    For project online performance issues, It would be best if you contact the MS support service, they are the ones really having the insight to the infrastructure and related things, they would be able to help more quickly than anyone else :) If you are
    not the Admin, you may ask your Admin to shoot a request online for support
    Thanks | Sunil Kr Singh | http://epmxperts.wordpress.com

  • Patch R12 on T4 engine takes a long time

    Hi All,
    I have patched R12 64bit (patch 8919491) on T4-1 machine takes a long time (not completed after 40 hours).
    ram 16, sga 2g, another init.ora I set default, idle cpu concumption 99%
    message alert.log : Incremental checkpoint up to RBA [0x3.1afee1.0], current log tail at RBA [0x3.1aff77.0]
    please help

    Hi Husein,
    Thank you for your help.
    I run adpatch as instruction on Readme.txt 8919491.
    here are status 16 of workers:
    96 -rw-r--r-- 1 oradev dba 48423 May 9 07:06 adwork004.log
    134 -rw-r--r-- 1 oradev dba 67870 May 9 07:04 adwork007.log
    148 -rw-r--r-- 1 oradev dba 74786 May 9 07:04 adwork005.log
    124 -rw-r--r-- 1 oradev dba 63411 May 9 07:04 adwork008.log
    54 -rw-r--r-- 1 oradev dba 27221 May 8 21:00 adwork002.log
    162 -rw-r--r-- 1 oradev dba 82239 May 8 21:00 adwork003.log
    224 -rw-r--r-- 1 oradev dba 102927 May 8 21:00 adwork001.log
    16 -rw-r--r-- 1 oradev dba 7809 May 8 21:00 adwork012.log
    14 -rw-r--r-- 1 oradev dba 7037 May 8 21:00 adwork014.log
    14 -rw-r--r-- 1 oradev dba 7037 May 8 21:00 adwork013.log
    20 -rw-r--r-- 1 oradev dba 9746 May 8 21:00 adwork011.log
    14 -rw-r--r-- 1 oradev dba 7037 May 8 21:00 adwork015.log
    20 -rw-r--r-- 1 oradev dba 10140 May 8 21:00 adwork010.log
    68 -rw-r--r-- 1 oradev dba 34358 May 8 21:00 adwork006.log
    22 -rw-r--r-- 1 oradev dba 10493 May 8 21:00 adwork009.log
    14 -rw-r--r-- 1 oradev dba 7037 May 8 21:00 adwork016.log
    I'll send you 2 workers status are adwork004.log and adwork016.log:
    1. adwork004.log :
    The Index in xdf-file and db match perfectly. No alteration necessary.
    Index WF_USER_ROLE_ASSIGNMENTS_N3 exists under APPLSYS schema.
    Checking for differences
    Column_name and Uniqueness match for both file and DB Indexes
    The Index in xdf-file and db match perfectly. No alteration necessary.
    Index WF_USER_ROLE_ASSIGNMENTS_N4 does not exist in APPLSYS.
    Skipping the creation of index WF_USER_ROLE_ASSIGNMENTS_N4 in current mode.
    Index WF_USER_ROLE_ASSIGNMENTS_U1 exists under APPLSYS schema.
    Checking for differences
    Column_name and Uniqueness match for both file and DB Indexes
    The Index in xdf-file and db match perfectly. No alteration necessary.
    Performing AOL meta data updates
    Attempting to update fnd tablespace meta data
    Upload of Fnd_Object_Tablespaces is successful
    AOL metadata updated successfully.
    ==========================================================
    Done calling the utility function. Return Code = [0] TimeStamp = [Wed May 08 21:01:01 WIT 2013]
    Updating task with status 0
    Time when worker completed job: Wed May 08 2013 21:01:01
    AdjavaWorker has reached the maximum wait timeout specified( 36000000 ). So Exiting.
    2. adwork016.log :
    Reading language and territory information from file...
    Reading language information from applUS.txt ...
    Temporarily resetting CLASSPATH to:
    "/u01/oracle/oradev/apps/apps_st/appl/ad/12.0.0/java/adjava.zip:/u01/oracle/oradev/apps/tech_st/10.1.3/appsutil/jdk/lib/dt.jar:/u01/oracle/oradev/apps/tech_st/10.1.3/appsutil/jdk/lib/tools.jar:/u01/oracle/oradev/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/rt.jar:/u01/oracle/oradev/apps/apps_st/comn/java/lib/appsborg.zip:/u01/oracle/oradev/apps/tech_st/10.1.2/forms/java:/u01/oracle/oradev/apps/tech_st/10.1.2/forms/java/frmall.jar:/u01/oracle/oradev/apps/tech_st/10.1.2/jlib/ewt3.jar:/u01/oracle/oradev/apps/tech_st/10.1.2/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar:/u01/oracle/oradev/apps/apps_st/comn/java/classes"
    Calling /u01/oracle/oradev/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java ...
    Exception in thread "main" java.sql.SQLException: The Network Adapter could not establish the connection
    at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:412)
    at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:531)
    at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:221)
    at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
    at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:503)
    at java.sql.DriverManager.getConnection(DriverManager.java:582)
    at java.sql.DriverManager.getConnection(DriverManager.java:185)
    at oracle.apps.ad.worker.AdJavaWorker.getAppsConnection(AdJavaWorker.java:1041)
    at oracle.apps.ad.worker.AdJavaWorker.main(AdJavaWorker.java:276)
    Caused by: oracle.net.ns.NetException: The Network Adapter could not establish the connection
    at oracle.net.nt.ConnStrategy.execute(ConnStrategy.java:359)
    at oracle.net.resolver.AddrResolution.resolveAndExecute(AddrResolution.java:422)
    at oracle.net.ns.NSProtocol.establishConnection(NSProtocol.java:672)
    at oracle.net.ns.NSProtocol.connect(NSProtocol.java:237)
    It's mean my machine is not enought for 16 workers ?
    please help

Maybe you are looking for