Performance Management: facing problem in appraisals through PMP

Hi,
I had published a PMP with an appraisal template which had objective template attached.
Objective setting tasks were correctly created, objectives were correctly added to each worker scorecard and approved.
Profile options for manager and worker appraisal menu are also set correctly.
PMP had appraisals included - and appraisal tasks have also been created in the system.
However, whenever I am trying to go through the appraisal task created by PMP - it is taking me to standard appraisals page - with no results. If I am trying to search - no results are obtained.
I'm confused what am I doing wrong / missing... will be grateful if someone could pls guide me.
Thanks,
Rahul

Hi
Since your mass appraisal creation process was automatic, it might have errored out because of which you are not seeing any appraisal.
Check Action Parameter Group - Max Errors Allowed and set it to 100 or more.
This would result in the mass appraisal creation process proceeding with appraisal creation for the rest of the employees even if few errored out.
Check the CP log to see if there was error, sometimes it errors out because of appraisees in different BG.
Thanks,
Rajlakshmi

Similar Messages

Performance Management Installation problem

Hi all
I'm in a big trouble with Performance Management XI installation on a BO XI R2 environment.
When I reach the CMS logon information, the CMS box is left blank by default, so I fill it and I got the following error:
"Logon Information for the CMS is invalid"
But when using java launchpad I can enter CMS with the same information (username, password, and authentication).
Anyone knows a file or something else where setup file looks for CMS configuration info?
thanks in advance
marco

Hello Marco,
I recommend to post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum.
This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
It is monitored by qualified technicians and you will get a faster response there.
Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk

Performance Management/Objective setting and Appraisals - To Hide elements

Hi All,
In PMS/Objective setting and Appraisals module, is there any BADI available to Hide elements( Criteria & Criteria group) on Sub status wise. Meaning, suppose i have Substatus A, B, C & D in status "2" ( In planning) and one of the VC element should be hidden in Status = 2 & substatus = A, B. But in "C" & "D" sub stauts it should be visible.
If BADI is not available then is there any possible way out for the same.
Thanks,
Ashwini.

There is no badi for this, it slipped of radar during the development of the hide element functionality.
The only why to achieve the same would be by having a customer own UI and control it on UI level, but its an ugly way which I do not recommend.
Regards and Groetjes,
Maurice Hagen

Performance Management: 'Share with Main Appraiser' button not visible

Hi Gurus,
I am using Oracle R12.1.3, Performance Management module.
I am trying to publish Performance Management Plan with Objective setting and Appraisals both tasks. Appraisal plan is set to be appraisee initiated, standard appraisal
However - When the appraisee is trying to initiate the appraisal (by clicking 'Update' on the appraisal task appeared) - s/he sees all the objectives set and get to choose a performance rating. However - the button 'Share with Main Appraiser' button is not visible.
When I am trying to create a Performance Management Plan with only 'Appraisals' - this problem is not occurring. Any clue as to how to rectify this problem?
PS - I have tried disabling personalizations and re-tried several times - but the same error occurs.
Would really appreciate any response which might help.
Thanks and Regards,
Rahul

I'm thankful for your effort Hussein. However, this document is applicable for version 12.1.4+ while I am working on 12.1.3. I re-tested the thing after making some changes in appraisal template where I ticked 'Update Appraisals for Terminated Workers' and also checking 2 more related check-boxes. Surprisingly it worked.
Also if I am selecting method for objective allocation as 'Parallel' - then also this error is not occurring - even with old appraisal template. Although this hit and trial worked, I do not have a logical view about the solution and correctness in all environments yet.

How do i create a new substatus in OSA (performance management)

how do i create a new substatus in OSA (performance management)

Hi,
Please create substatus through transaction code OOHAP_BASIC. Select u201Csubstatusu201D folder from the left column.
Hope this helps.
Donnie

MSS Dashboard for Performance Management - PMP vs Flexi-Form

Hello Experts,
I have the following problem in Performance Management.
We have decided to use PMP template for some employees (manager level) and Flexi-form for remaining employees (because we have pre-defined criteria in template that PMP UI is not showing).
I found that PMP dashboard in MSS is only showing PMP appraisals.
When manager opens Flex-form UI, it is showing all appraisals that the manager is responsible for (PMP & Flexi) and when the manager clicks on an employee's appraisal document link, it is always displaying the document in Flexi UI mode.
If a manager is having half of his employees using PMP and other half using Flexi-form, what is the best way for him to look at Dashboard (initial screen to open employee's appraisals), so that for PMP appraisals will open with PMP UI and Flexi appraisals will open with Flexi UI?
Thanks
Raghu Kolukuluri

>
Raghu Kolukuluri wrote:
> Hello Michael,
> It would be very very helpful, if you can find out how to do the setting, so that the quick criteria maintenance is defaulted to only include the templates you need on flexible.
>
> I talked to my Portal developers and the initial feedback that I got is that it is not a simple configuration, but it may be possible using a program.
>
> Any other ideas?
>
> One more question I have.
> What is the purpose of "Assessment" link under Talent Management? It never works for me.
>
> Thanks
> Raghu Kolukuluri
Hi Raghu,
So i was wrong about it being portal development, glad I finally figured out how to do it.
configuring the "quick criteria maintenance":
It can be done by config following this post: Define default value in POWL Quick Criteria Maintenance for all users
regarding assessment, it doesn't work for you, b/c you probably haven't done the configuration. go to talent management and talent development > talent assessment.
here you wil have to read all the IMG activities, the documentation is decent on how to implement. Basically with EP4, there are new types of assessment that a manager can do besides just performance, this includes assessing potential, risks, barriers, and development plans. all of these assessments processes tie into downstream talent management processes such as talent review meetings and succession planning. hope this helps.

Facing Problem in Config Archieve through SSH for ASA

HI ,
I am facing problem in Ciscoworks in Fetching config Archieve from Cisco ASA-5510 Adaptive Security Appliance . I am using LMS 3.2 and RME 4.3.1
SSH is enable in the device, and from LMS server I am able to connect through Putty. Also from Management station to Device it showing SSH is up for both version. But from RME its failing Its giving below mentioned error
Device: COGINHYDGCBDFHRTF1 Status: Failed
*** Device Details for COGINHYDGCBDFHRTF1 ***
Protocol ==> Unknown / Not Applicable
Selected Protocols with order ==> SSH,Telnet,TFTP,RCP,SCP,HTTPS
Execution Result:
RUNNING
CM0151 PRIMARY RUNNING Config fetch failed for COGINHYDGCBDFHRTF1 Cause: Couldnot enter ENABLE Mode from USER Mode on 10.241.44.220.TELNET: Failed to establish TELNET connection to 10.241.44.220 - Cause: Connection refused.
Action: Check if protocol is supported by device and required device package is installed. Check device credentials. Increase timeout value, if required.
I have tried from LMS server by telneting to port 22, its giving below output------SSH-1.99-Cisco-1.25
When I have tried to test device credentials for SSH and SSH Enable mode, then below output I am getting. SSH remains blank status.
Device Name
SSH
Enable
by SSH
1.
COGINHYDGCBDFHRTF1
Did Not Try
Pls help to resolve this.

Hi,
Take a look at the code you are running on the ASA and see if this bug fits. http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtd67173
Thanks.

Problem in refreshing Performance Manager Metric

Hi,
We are Using SAP BusinessObjects XI 3.1 SP3.
On this environment, we have configured SAO BO Performance manager / Dashboard manager Application (not EPM).
While refreshing the metric following error occurs;
Error:The probe engine cannot query the repository.(EPM 03008)<Metric Name> : ORA-00936:missing expression
Any clue on this?
BTW, I have tried to debug the problem and verified that, the query generated for metric is syntactically correct and runs without any problem (when @prompt replaced by actual date).
Some more details are as below;
Created a Calendar (Monthly) and also Created a Dimension.
The Connection is created which has privileges to access both PM Repository Schema and the Report Data Schema.
Thanks,
With Regards,
Sachin Dalal

the very simple strategy to do is to call removeAllItems() method for the 2nd combox box and then insert the contents. this is because the validate() method is not repeatedly called and so the contents are not updated immediately.

Configure approval process in Appraisals - Performance Management

Hi Guys
I am trying to configure the approval process. After the final appraisal by the manager, the appraisal forms hould go to the manager of the manager (next level manager) for approval.
My queries:
1. Is the next level manager defined as further participant or part appraiser?
2. Where do we assign the next level manager? In PHAP_PREPARE? I don't see anyplace where I can do that.
I have done the following configuration:
1. At category level, selected Role 'Higher Manager'
2. At category level, in Status flow--> Person Authorized, selected Higher-Level Manager.
3. In the template, selected Higher Manager in Roles.
What am I missing here?
Regards
FS

Hi FS,
I am also facing the Performance Management Higher Level Manager Approval issue in my client. Will you be able to help me about this BADI: HRHAP00_DOC_DEF_DO. How did you impleted this BADI related to higher level manager and how did you configure in Status flow.
Please Provide technical details about the BADI and configuration about the status flow also.
Thanks in Advance.
-Abhi

Facing problem in Information broadcasting through BI 7.0

Hi,
I am facing problem in Information broadcasting through BI 7.0
In Web Bex Anyalzer, i selected the information bradcasting via Email.
I did all setting for Information bradcasting, in the output Format, when I select the output format as HTML or MHTML the system gives is error when i click the excute button after scheduling .
It gives an Shot DUMP on "MESSAGE_TYPE_X"
And in WEB BEX Analyzer follwing are error messages
Note
The following error text was processed in the system BWQ : The current application triggered a termination with a short dump.
The error occurred on the application server uplbwq_BWQ_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Form: INTERNAL_ERROR of program SAPLSDCL
Form: PHIO_GET_CONTENT_ACCESS of program SAPLSDCI
Function: SDOK_PHIO_GET_CONTENT_ACCESS of program SAPLSDCI
Function: SKWF_PHIO_CONTENT_ACCESS_GET of program SAPLSKWF_CONTENT
Method: COPY_MIME_TO_FOLDER of program CL_RSRA_KWF_UTILITIES=========CP
Method: GET_STYLESHEET of program CL_RSRA_KWF_TMPL==============CP
Method: CONSTRUCTOR of program CL_RSRA_KWF_TMPL==============CP
Method: SET_TEMPLATE_FOLDER of program CL_RSRA_ENGINE_BC=============CP
Method: CONSTRUCTOR of program CL_RSRA_ENGINE_BC=============CP
Method: EXECUTE_SINGLE of program CL_RSRA_JOB===================CP
But when i select the output Format as "online link to current data" there is no error when i click the excute button after scheduling . I receive a email with the Link for the online data, which open up query when i click the link.
But in the output type HTML or HTML it does not work.
Can suggest anu solution ASAP.
Thank in Advance.
Nilesh Labde.

from the OSS Message

I am loading hierarachy through flat file but facing problem

i am loading hierarachy through flat file but facing problem when creating infopackage still error coming please suggest details what are steps followed

Hi,
Follow the steps:
     Hierachy through flat file
     First create a flat file save as in .CSV format. Then close the file.
       Create info area in info object then info object catalog opens then create it then info object screen opens then another screen opens were you will give data type, length then select option hierarchy tab, then select it simply select the check box with hierarchies.
        Select attribute tab in that name, age, address, phone then activate it then come back to the main screen then select characters right click a small screen open then select info object then a small screen opens then create sales region and activate it.
     Then return back to the main screen then click characters right click on it then a small window opens then select info object option & create sales office and activate it.
     Then return to the main screen then select characters then the ID then the double click on it then the other screen opens select hierarchy tab then select external chars in hierarchies then click on it then other screen opens then select find tab then give the sales region info object name and click continue then it finds the name.
     The name would be scroll on the other screen then the office should be find the same way as region then office would be scroll on the other screen then continue and activate it.
     Then come back to the main screen then go to info source option then it opens then create application component then it opens other screen then click continue it
     Then create info source for master data then select direct update option there give the name of the info object of as ex; YID_AS2 then click continue.
     Then the YID_AS@ could be seen in the main screen then right click on it. Then a small option opens then click assign data source option then other screen opens there it gives the empty space double click on it then PC file then click continue then another window opens click continue then again screen opens click continue again a pop up screen opens click continue.
     Then another screen opens there the attribute data source then activate it then select hierarchy activate it then the left side data structure/ hierarchy then click on it then it opens another screen then click hire maintenance button .
     Then give the hierarchy name (your wish) then go with continue then yes then save then go back to the main screen.
     Then maintain the flat file as node id, info object, node name, link name, parent no.
     Then info package creation then click on the flat file right clicks on it then a other screen opens then select attribute data source and then continue.
        Then other screen opens then select external data tab in .CSV then click 1 the enter preview then another screen opens then click then it shows the preview then schedule then start then monitor click on it then it opens other screen then click on the master data then we can see the data then go back to the main screen.
     Then select the flat file right click on it then it gives other screen then select hierarchy in that then click continue then it opens other screen then select hierarchy selection tab there you can see the file name then select the button of hierarchy.
     Then select External data then the file name in CSV then processing tab only psa option with update subsequently in data targets then the update it schedule start then the monitor then go to the main screen.
     Then go to info object then select the file id which you have given then double click on it then select hierarchy or text file then the contents then execute it.
     Create a transaction table , cube in a normal way. We can see the result in reports we have to give the hierarchy name in the properties of rows where we drag the characteristics id then we can see the records which we have entered man usally after executing the report.
regards
ashwin

TS4006 Facing problem in updating my apps through wifi since last two weeks?

Facing problem in updating my apps through wifi since last two weeks?

Hi there,
You may find the troubleshooting steps in the article below helpful.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
-Griff W.

Problem Exporting Performance Management ScorecardData From MaxDB to Oracle

Hi all,
Iu2019m using the Transporter Utility in order to move a Context from QA to Production. However i´m having the following problems to do that:
Here are the specs of my systems:
QA System:
- SAP NetWeaver CE 7.1 EHP 1
- MaxDB 7.7 (DB Schema DB1)
- SAP Strategy Management 7.5 SP06
Production System:
- SAP NetWeaver CE 7.1 EHP 1
- Oracle 10.2.0.4 (DB Schema DB1)
- SAP Strategy Management 7.5 SP06
I followed the steps from the Strategy Management Upgrade Guide 7.5:
1) Access http:///strategy/tools
2) Click Transporter
3) Select Export all data (From All Databases, there are four)
4) Click Export Database
5) Click Download Export
6) Open the downloaded .zip file and sort by size and checked if files have a length of 0.
On the production system I make a clean install of Strategy Management 7.5 SP06, and everything seems to be OK, but when I import the performance management scorecard data with the transporter utility, it said it's OK, and then when I look in the Administration area, I cant see the context that I want to migrate, I can only see the samples contexts that brings the SSM which I haven't imported, I imported the latest boostrap.zip.
But I can see the migrated models and test them with PAS.
(Can I create scripts from Strategy Management tables with MaxDB and then import them into Oracle?)
If anyone can help me, or has a similar problem and could fix it, I appreciate it.
Thanks in advance.
Regards,
David

Hello Agudelo,
First of all, just for clarification, the models in PAS have to be transported manually between the systems, there in no export and import function. This is done independently from the transport of the scorecard databases.
For the transport of the scorecard databases, how many are then available if you use the demolauncher? You can also go to the tools page, in the Add Database options and see how many DBs were transported. If you access the administration link directly, only the contexts from the PWSAMPLE database will be displayed. You can change this property in the Java System Properties so that this link points to the administration page of a different scorecard database. If you want to see all links to all scorecard dbs, then use the /strategy/pilotworks/demolauncher.htm link.
Best regards,
Ricardo

Performance Managment - Appraisals still pending for ex employees

Hello!
I had a quick question and hope someone can answer it for me. Is there a process which can be run to remove appraisals from performance managment (MSS) when an employee leaves an organisation?
currently we are getting many calls/tickets wondering why a persons appraisal is still active in thier performance management worklist even though they have left the company. So far we have suggested that they manually delete them, but surely there must be an easier way?
secondly, which actions are automatically purged when an employee leaves?
Many thanks,
Samir

""" On the portal "Status Overview" I-View for MSS --> Maintain Performance Documents, there is a property for employee evaluation period which needs to be set to "Yes". ""
how to change this property?
under content admin????
Thanks in advance.

Performance Manager Problem with Starting

Hello
I am new to Administration and have a proplem in OEM Diagnostic pack related with Performance manager, any help in this regard is highly appreciated...
I am not able to start datagatherer on my system with windows 2000 professional edition.
every time i try to start the service OracleOraHome8IDataGatherer I get
Error:1067: The process terminated unexpectedly.
and at Performance manager I get
VTM-0005 error connecting to server
java.net.connectException: connection refused..
Also i encountered an error during installation of diagnostic pack.
OLE initialize of OCX load error while registering OCX
output of InstallActions.log
Starting install install phase 1 of component Oracle Enterprise Manager Packs and Management Infrastructure
Calling action w32OcxRegActions1.7.0.17.0 RegisterOCX
OcxPath = C:\Oracle\Ora81\bin\mmdx32.ocx
WorkingDir = C:\Oracle\Ora81\bin
Exception thrown from action: RegisterOCX
Exception Name: ErrorRegisteringOCXException
Exception String: OLE initialize or OCX load error while registering OCX
Exception Severity: 0
Exception handling set to prompt user with options to RETRY IGNORE
User choice : Retry

Increate the virtual memory and try to start the service here:
SELECT START > CONTROL PANEL > ADMINISTRATIVE TOOLS > SERVICES
Joel Pérez

Performance Management: facing problem in appraisals through PMP

Similar Messages

Maybe you are looking for