Performance problem for mass transactions after upgrade from 4.7 to ECC6.0

Hi All,
After upgrade from 4.7 to ECC 6.0 (IS-U), mass transactions such as FPY1, FPVA, FP04M are taking very long time to complete. for example, before upgrade the jobs sceduled for FPVA transaction take around 5k-6k seconds. Whereas after upgrade the jobs for FPVA with the same variant takes around 9k-10k seconds. I am unable to figure out the cause for exponential increase in the duration of several mass-jobs (after the upgrade). Are there any SAP notes or do we need to do any customizing setting to solve this problem? Does anyone face this kind of problem?
Thanks in advance
Taj

Hi,
This is normal after upgrade to 6.0, I have faced the same in all upgrades I've done and some others that I have involved also. If you did not requests and going live upgrade check I strongly recomend to schedule an Early Watch Check to minimize the impact. Times won´t be the same but can be very close if the system is tuned well. We have tuned systems that now run with good performance after this services.

Similar Messages

  • Fields in read-only mode for BP transaction in upgrade from 4.72 to ECC6.0

    Hello,
    This is regarding the query for BP transaction in upgrade from 4.72 to ECC 6.0.
    While creating BP / Changing BP system is disabling the fields in compnay code & sales area option. There is a SAP not provided 907860; and specified that the proplem is because of the delta customizing.
    All the customization settings are as per the note. And the Synchronization Control is also activated. But still the fields are disabled only.
    I have checked the field settings also in Cross-Application-Components & Logistic-Genral.
    But these are not working for compnay code & sales area data.
    please let me know if anyone has faced this type of problem / found any solution on this.
    Best Regards,
    Shubhada

    SAP IMG  -> Cross Application Components -> Master Data Synchronization  Synchronization Control -> Synchronization Control -> Activate Synchronization options
    This setting allows you to activate synchronization of BP with R/3. Not maintaining the values may result in certain fields being read-only in BP.
    Suggested Values:
    Source Object: BP | Target Object: CUSTOMER | Active Indicator : X
    Source Object: BP | Target Object: VENDOR | Active Indicator : X
    Source Object: CUSTOMER | Target Object: BP | Active Indicator : X
    Source Object: VENDOR | Target Object: BP | Active Indicator : X
    Have you set all of the above settings??
    BHARATH

  • Problem in a transaction after upgrade

    Hi ,
    I am getting a problem in transaction after upgrade.
    I am getting like "Too Many sctions"  in a Tab. Its a custom tab in a standard transaction.
    But its working fine before upgrade.
    Could you please suggest me, what can I do for this.
    some more  info.
    Errors: Dynpro genearation for this scrn has errors.
    call tcode SLG1 for object BDT_Dynpro_generate.
    And in SLG1 I am getting like this
    "Object RERO screen  RERO03: too many sctions."
    Regards,
    sarath

    Well if you are willing to invest money, even SAP will help you out, but i guess thats not what you are after :).
    The message "too many sections" is quite telling so i suppose you have too much of "something" on that subscreen.
    To more preciseley define what "something" may be you could do a where used on MESSAGE 03 of messagle class RERO.
    Or try to debug it and set a breakpoint at statement MESSAGE.
    This way you should be able to find out of WHAT exactky you have too much. When this is done you probably can think yourself of a way to overcome this.

  • Problems with IMAQ Vision after upgrading from Labview 6i to Labview 6.1

    Hi,
    We just upgraded from Labview 6i to 6.1.To do this,we uninstalled the 6i version as was suggested by NI and then installed the 6.1 version.Later when we tried to run the old vi's written using Imaq vision, we ran into different problems.Has anyone experienced any similar problems with IMaq vision after upgrading?If so please help me solve this issue.
    Thanx
    deepak

    What kind of problems?
    I would strongly suggest that you uninstall IMAQ (all elements) and reinstall them. They register with Windows, probably docked to 6i, and also must be recompiled, which I believe is done in installation.
    This is your best bet.
    If you still have problems, contact NI and ni.com/ask and start a support inquiry.

  • Invoice Receipt Warning Message Appear After Upgrade from 4.6C to ECC6

    Hi Gurus,
    We do upgrade from 4.6C to ECC6. And we do Invoice Verification base on Delivery (Vendor delivery number), in our business process there more than one Purchase Order has same Vendor Delivery Number while GR executed. But only one Purchase order related to Invoice verification, others PO are Free PO (no need Invoice Verification).
    The problem is:
    In SAP 4.6C, while execute Invoice base on Delivery (Vendor delivery), system automatic select only PO with Delivery (vendor) which related/allow invoice receipt.
    In SAP ECC6, while execute Invoice base on Delivery (vendor delivery), all PO selected. So than there are warning messages appear (warning pop screen) for those PO not allow invoice Receipt (message M8035: PO item XXXXX does not allow invoice receipt), and at the end PO which allow Invoice receipt then appear for further Invoice Receipt process.
    At overall, the final result SAP 4.6C and SAP ECC6 is same (only PO which allowed Invoice Receipt will processed further).
    The Question are:
    1. Why in ECC6 appear warning message, while in 4.6C no warning message ? Is there config to ignoring the warning message. I've try to maintain system message for M8035 (t-code: OMRM) to ignoring the pop screen, but can not created.
    2. How do we make warning message dissapear (no need warning message), because if the PO's has hundred items so user need to click enter hundred times.
    Thanks in advance.
    Regards,
    Tri Wicaksono

    Hi,
    could you please check whether the flag "GR-based IV" is set in the purchase orders?
    If GR based-IV is ticked, then this pop-up cannot be suppressed.
    If you would like to post the invoice first then GR-based IV should not be checked, otherwise this pop-up will always appear.  I am afraid that this behaviour is standard. 
    Please, be aware that this feature is only available if you set  in the Purchase Order item the 'GR-based IV' indicator:
       If the GR-IV flag is not set in the PO, then the system does not                     
       differentiate individual goods receipts. Please see the <f1> help                    
       for the field "GR-IV" in the PO item detail. Since the individual                    
       receipts are not differentiated, an invoice is not tied per se to                    
       an individual receipt and a goods receipt can be reversed despite                    
       an invoice receipt.                                                                               
    With the GR-IV flag set on in a PO, you can specify which goods                      
       receipt is being invoiced in an IR and which goods receipt is being                  
       reversed in a return. It is this correlation between goods receipts                  
       and invoices that enables you to specify for GR-IV PO's whether an                   
       item can be returned despite an invoice. 
    Please refer to the note :457511 Question 10.          
    Best regards
    Erika

  • Report Layout Changed After Upgrade from 4.6C to ECC6

    Dear Gurus,
    I do functional test of every process in ECC6 after upgrade from 4.6C. I found all report layout changed without variant (it's happen to all Query/SQ01 reports ). So I've to assign manually the fields for the reports, and create a default variant then.
    Why it happen ? Is there configuration or setting missed or this is standard while we do upgrade ?
    Thx in advance.
    Tri Wicaksono

    We do re arrange for all ALV report ...

  • Problem with Billing Engine after upgrade from CRM 5.0 to CRM 7.0

    Hello together,
    The system  of our customer has been upgraded from CRM 5.0 to CRM 7.0. After that some problems occurred regarded the billing.
    In the Billing Due List a dump occurs when clicking on an item and then on conditions
    Dump message: No function module can be found named "/1BEA/CRMB_DL_PAR_O_DERIVE" however.
    (Other classes are  new generated after the upgrade)
    During the Analysis we looked to the billing engine navigator:
    In the Billing Engine Navigator (Transaction: BEFN_F1) the Generation Log shows the following:
    We have re-generated the Object PAR in CRMB->DL->Feature->PAR. But this shows the above displayed error message. How can we add value to the Placeholder?
    Another question is which impacts does it have if we regenerate the complete billing engine for CRMB with transaction BEA_CONFIG_F1 (Configure Application)?
    BR, Anne

    Hi Nawanit,
    we checked the key figure settings and categories. Everything is maintained correctly.
    Since we work with MRP areas we also checked the "Global Parameters and Default Values for MRP Areas" in APO Customizing: The "Default values for Stock Transfer Documents" is set to "1" = Stock Transport Requisitions for MRP Areas.
    BUT: When I try ot change this indicator I get the following message no. /SAPAPO/MRPA000:
    "Process. w. stock transp. requisitions is not supported in standard sys. The process with stock transport requisitions will be supported as of SAP R/3 Enterprise Core Release 4.70 with SAP R/3 Enterprise Extension Set 2.0. ".
    As far as we work with ECC 6.0, EHP4 this message makes no sense.
    Does anyone have another idea?
    Thanks
    Jan

  • Problem with field catalog after upgrade from 4.0

    Hi experts,
    We have recently upgraded from CRM 4.0 to 5.2.
    I am now experiencing a problem with generation of a transport request for field catalog in transaction CTFC_CRM. I can generate the field catalog without errors.
    The problem is that when I want to create the transport request in our dev system a pop up appears saying "Create object directory entry". Here I have to enter a package for some of the fields in the field catalog. The special thing is that the fields are not custom fields but rather SAP standard fields (using standard data elements). For example field BZIRK.
    These are SAP standard fields but they are not standard in the field catalog. In 4.0 I did not get this prompt but this has apparently changed from 5.0.
    What do I do? I guess if I need to create the objects I will need to use an SAP standard package. But how do I know what package to use?
    Any comments or suggestions will be highly appreciated.
    Best regards,
    Anders

    Hi,
    If you did just install database, then you use Embed PL/SQL Gateway.
    See this guide
    Upgrading Oracle Application Express in Oracle Database Express Edition
    I think you have not run step 5 script apxldimg.sql
    Regards,
    Jari

  • Problem with Java Script after upgrade from BW 3.5 to BI7

    Dear Colleagues,
    We're facing the issue with Java Script after upgrade of BW 3.5 to BI7.
    Just after update we checked the basic functionality and it occured that some of web templates that use Java Script don't work. They generate seelction screen, but after selection the screen becomes blank without any error messages.
    We're currently stucked since web templates weren't converted to BI7 version so they should work exactly as before the upgrade.
    We compared the Java code with other environment that was not upgraded - it's perfectly the same.
    The only explanation that comes to my mind is that some Java Script settings on the server level were changed during the upgrade but I have no idea where I can check that.
    Thanks in advance for any suggestions,
    Andrzej Bobula

    Hi Deepu,
    Thanks, it was great to read your reply and then few minutes later talk to you live on SDN Day!
    Unfortunately, http cache clean-up did not help. But there is another funny thing I found - for exactly the same 3.5 webtemplate html code returned from WebAS 3.5 was different then from 7.0.
    Unfortunately, this editor does not allow to paste complete code, even in CODE brackets, but here are main differences:
    <b>3.5</b>
       if (navigator.appName == "Microsoft Internet Explorer")
    <frame src="/sap/bw/BEx?SAP-LANGUAGE=E&PAGENO=1&REQUEST_NO=1&CMD=GET_TEMPLATE"
    name="Content">
    and
    <b>7.0</b>
       if (navigator.appName.indexOf("Microsoft Internet Explorer")!=-1)
    <frame src="/sap/bw/BEx?SAP-LANGUAGE=E&PAGENO=8&REQUEST_NO=0&CMD=GET_TEMPLATE"
    name="Content" 0nLoad="javascript:loadTitle()">
    (I intentionaly put 0 i/o o in 0nLoad, otherwise Forum's editor does not accept the text.
    How about SAP's claim that technical upgrade from 3.x to 7.0 changes nothing?
    Regards,
    Vitaliy

  • Cannot 'Unmark Blank' for FIB Questions after Upgrade from CP4 to CP5 (Fill in the Blank)

    Hi Everyone!
    I'm having trouble editing a fill in the blank question that was upgraded from CP4 to CP5.
    The problems is I cannot see where the blank is.  Not the blank in my sentence, I have that, but the entry box. When running the course the blanks are at the TOP LEFT corner fo the slide.
    but when creating the course I can't see where the blanks are, to move them.....
    So to Troubleshoot, I thought I'd re-construct the answers, I clicked the sentence, and clicked unmark ... but it does not unmark....
    <EDIT> Okay I got it to unmark, sorta, but not really. Now I have three answer boxes on the test in run mode, but cant see ANY in CP5 when building it. </EDIT>
    Hmmmmm
    Anyone got ideas?
    (re-constructing the question on a new slide is not desired, I have hundres of questions, considering my 30 courses.
    Thank you!
    Greg

    Hello,
    Sorry, but I do not understand your question quite well, it is an editing issue when upgrading. Perhaps it would help if you posted some screenshots?
    And to be sure: did you install the patch for CP5 released in December?
    Lilybiri

  • After upgrade from 4.6c to ECC6.0 F4 Help is not coming for few date fields

    Hi Friends
    Just now we have completed upgrade project from 4.6c to ECC6.0.
    After upgrade F4 help is not working for some date fields.
    For example its working in MB11,Its not working in va01,vf01 like that.
    In abap side we checked ...not able to find any issues in coding level, because its a standard SAP code.
    So if any solution is there to correct this issue.Kindly help me to resolve this asap.
    Thanks
    Gowrishankar
    Edited by: gowrishankar p on Nov 17, 2009 7:25 AM

    Hi
        Please refer to the SAP note 1278056 and 1278115 - PDS Display: F4-characteristic values are not selectable.  Hope this will resolve your issue.
    Regards,
    JB

  • Password problem in oracle 10g after upgrading from oracle 9i

    Hi to all,
    i'm migrating oracle 9i to oracle 10g. in oracle 9i username/password are same character(eg kareem/kareem)
    after upgrading to oracle 10g will it create any problem. Because in oracle 10g the condition is when creating user is username and password should not contain same character (kareem/kareem not allowed).
    Thanks in advance

    in oracle 10g document, they have mention below condition to create user. See the second condition.
    • Passwords must be between 4 and 30 characters long.
    • Passwords cannot be the same as the user name.
    • Passwords must be from the database character set and can include the underscore (_), dollar ($), and pound sign (#) characters.
    • Passwords cannot be Oracle reserved words.
    • Don't start the password with a numeral.
    • Don's use change_on_install or manager as passwords, since they are used by Oracle.
    As i'm going to upgrade oracle 9i to 10g. if it give problem because username and password are same then i have to request my development team to change the password in their application.Can you please verify and tell me.
    Edited by: user7071421 on Sep 25, 2008 4:33 AM

  • New for ABAP in functional upgrade from 4.6c to ECC6.0

    i want to know the enhancements, additions and changes in the technical side/ABAP , when moved from 4.6c to ECC6.0 in case of FUNCTIONAL UPGRADE only....
    our compny has done FUNCTIONAL UPGRADE so far..whats new for technical ppl like us apart from changing bdcs, some missing functions, etc...
    thanx,
    Naveen Vishal

    Hi
    Technical upgrade is the fast upgrade without additional functionality but with minor user interface changes to ensure business continuity.  In the past, all objects modified by a customer had to be manually re-modified during an upgrade. Now, modifications are either automatically adopted or the system provides you with an assistant for adjusting your modifications to the newly upgraded configuration using transactin SPAU and SPDD.
    SPDD:  This transaction allows you to adjust modifications to ABAP Dictionary objects during an upgarde.
    Using this transaction we can adjust the Domains, Data Elements, Tables, Strcutures, Transparent tables, pooled and cluster tables including their technical settings, indexs of transparent tables. If you adjust data elements that have been changed with the Modification Assistant in an earlier release, the changes can be copied automatically.
    Steps to run SPDD: 
           1.      1)  Start transaction SE03 as user DDIC and choose Administration ® Set system change option
           2.      2)  Select Modifiable in the Global setting dialog box.
           3.      3) Choose Continue.
           4.      4) Choose Edit ® Select all.
           5.      5) Save your changes.
           6.      Then log on as a normal user, since user DDIC may not perform any repairs.
    SPAU:  This transaction allows you to adjust programs, function modules, screens, interfaces, documentation and text elements after an upgrade.
    After you adjusted or edited an object, you can use User/Status function to modify the status of the object. Before doing this, you can also add other developers or testers that are allowed to edit the object and create a short note.
    Steps to run SPAU:
    1) Start transaction SE03 as user DDIC and choose Tools ® Administration ® Set system change option.
           2.      2)  Select Modifiablein the Global setting dialog box.
           3.      3) Choose Continue.
           4.      4) Choose Edit ® Select all.
           5.      5) Save your entries.
           6.      Then log on as a normal user, since user DDIC may not perform any repairs.
    Other important topics in Technical Upgrade:
    Updaring the Development System: Perform the adjust int he development system using SPDD and SPAU transctions and assign to transport requests.  The upgrade control program R3up exports the transport that you have marked in a later upgrade phase.
    Upgrading the Production System: During this phase, the R3up upgrade control program checks whether there are any change requests registered for transport from the development system to the production system. If this is the case, R3up offers to import the transport automatically, instead of you carrying out adjustments with transactions SPDD/SPAU. If you choose this procedure, you still have the option of stopping SPDD/SPAU to check the changes accepted automatically before they are activated.
    If you decide to import a transport automatically, a subsequent analysis checks whether there is an entry in the transport you specified for each modified object found in this SAP System. Only if this is the case is the transport marked as suitable.
    If there are more modified objects in the production system than in the test system, they cannot be dealt with by the transport. This means that you have to adjust these objects.
    If you had more modified objects in the test system than in the production system and these are also contained in the transport, you import these into the production system with the transport
    regards
    karthik
    Reward points if useful

  • Error in Auto Generated Reports after upgradation from 4.5B to ECC6

    Hi All,
    We are currently upgraded the system from 4.5B to ECC6.
    We are having many reports with report names such as
    'GP0HRYGE9KG1RM5HN4WY9MXC9E4'
    'GP0IZ026BMC4SX5K8BISNZ00FSV' with few syntax errors in it.
    Can any one suggest whether these are any auto generared reports , as the report starts from 'GP *'.
    If so, please suggest how to regenerate the same.
    Thanks.
    Regards,

    Please check the below SAP Note:
    [Note 586786 - Short dump PERFORM_NOT_FOUND with forms from SAPLJ1AY|https://service.sap.com/sap/support/notes/586786]
    Regards,
    Dipanjan

  • Performance problems on BI Platform after upgrading to Design Studio 1.3 SP01

    Hi,
    we upgraded our Design Studio Add-On from version 1.2 to 1.3 SP01 on our BI 4.1 Platform. (SP01 Patch 2)
    After the installation we got performance issues in the BI Launch Pad when opening instances of WEBi reports for example.
    Anyone with a problem like that ?
    Tobias

    Hi Denis,
    for example we've got a WEBI report which is scheduled daily to the default enterprise location. We hold a history of 30 instances. If i try to open the latest instance or any other instance it took a long time to open. The only thing we changed was the installation of DS 1.3 SP01.
    I did a few tests and it seems that if i opened the instance one time, it will be faster the second time, if i open it in the same browser session.
    I now try to run the End to End trace to see where the time is beeing spent.
    Did you hear something about any problems with the BI 4.1 Platform after installing DS 1.3 SP01 ?
    Thanks for your help,
    Tobias

Maybe you are looking for

  • Memory leak in Waveform Graph?

    Either thier is a huge memory leak in the waveform graph or I am really doing something wrong. I created an example app with a waveform graph and a button the contructor looks as follows: Form1(void) InitializeComponent(); vals = gcnew array<double>(

  • Sandbox differences between CS6 and CC on Mavericks?

    Colleagues, I have a CS Extension for InDesign that does authentication with a web service using OAuth2. The extension works perfectly in InDesign CS6 in OS X Mavericks, but fails in InDesign CC on the same system. The extension *sends* the login req

  • Integration of Data modeler into Eclipse or any other tool?

    I was asked if one can use any other development environment with Data Modeler. e.g. Eclipse?

  • Videos with transitions have garbage when played back

    I have recurring problems when inserting videos made with Keynote (6.5.3) and exported to QuickTime. Please see DropBox link for example video. Image in video is 1500 x 1000 px, imported into Keynote in original size-no scaling.

  • Mass Generation of Billing output

    Hello Gurus, The output condition record for EDI invoices was not entered at the beginning for a customer, so as a result I have many invoices for which I need to generate the EDI output record. I know I can go into each invoice (VF02) and generate i