PerformancePoint in Sharepoint 2010 and SQL Server 2012 data source

Hi,
I have a problem on creating PerformancePoint reports in Sharepoint 2010 based on SQL Server 2012 source data.
I try to create a data source in PerformancePoint dashboard designer, I choose Analysis Services, and I get a following error:
            "The data source cannot be used because PerformancePoint Services is not
configured correctly...."
I think it is due to a version of a ADOMD.NET component that needs to be installed, but I am not sure which version is necessary? Could you help
me with that?
Of course, if there are any other prerequisites, please, tell me.
Regards,
Srdjan Nikitovic

Did you set unattended service account for your PPS?
The Data source cannot be used because PerformancePoint
Services is not configured correctly
http://ericphan.net/blog/2010/4/19/performance-point-server-error-the-unattended-service-accoun.html
Amit

Similar Messages

  • SharePoint 2010 and SQL Server 2012 issue

    Hi,
    I have SharePoint 2010 integrated with SQL Server 2008 R2 in my machine. I wanted to use Power View feature, so I went for SQL Server 2012 installation. Now when I try to create the SQL Server Reporting service service application, it says, this feature
    is not supported by current version of database.
    Please let me know how to fix the issue. Do I need to reinstall SharePoint 2010 once again using SQL Server 2012 ?
    thanks
    Tarique

    http://social.technet.microsoft.com/Forums/sharepoint/en-US/9eacbd00-f264-4f55-bd27-55cf0761cbd7/power-view-is-not-supported-in-this-edition-of-reporting-services?forum=sharepointadmin
    The only requirements for SSRS Integrated mode/PowerView are that you're using SharePoint Enterprise and SQL Enterprise/BI and that SharePoint be installed and joined to the farm on the server where you're also installing SSRS.
    You need to reconfigure your sharepoint farm farm to use SQL server 2012 
    http://technet.microsoft.com/en-us/library/ee210640.aspx
    Business intelligence features are not all available in all editions of SQL Server 2012

  • How to configure workflow manager 1.0 ? Scenario "sharepoint 2013 and sql server 2012 workflow manager in one server" .

    i have sharepoint 2013 and sql server 2012 in one server . how to configure workflow manager 1.0 on the same server ?

    Please follow below technet article :
    http://technet.microsoft.com/en-us/library/jj658588(v=office.15).aspx
    Installing and Configuring Workflow Manager 1.0 (Step by Step)
    Note: The steps in this article apply to SharePoint Server 2013.
    The SharePoint 2013 Workflow platform is not supported in SharePoint Foundation 2013.
    If my contribution helps you, please click Mark As Answer on that post and
    Vote as Helpful
    Thanks, ShankarSingh(MCP)

  • Can SharePoint 2010 read data from an external SQL Server 2012 data Source?

    Hi,
     I would like to Know whether SharePoint can read the data from a SQL server 2012 external data source?
    I am not talking about SharePoint internal database. I need to get the data from an sql database which is used by some other application. For My SharePoint server I am using SQL 2008 R2 as an internal database engine. But I need to get some other data from
    another data Source which is configured in SQL server 2012.  Can any one help me on this whether is there any problem on accessing the data from SQL 2012. If there is no problem for that, please provide me the version of SQL data source compatible with
    SharePoint 2010 and SP 2010 sp1. 
    Thanks!
    Regards,
    Henoy 

    Hi Romeo ,
    I have already visited this page. But there is no answer for my question. I just want to know whether we
    can done the same from a SQL 2012 server.
    Please help me to know whether SharePoint 2010 is Compatible to get the data from SQL 2012 external data source.
    Thanks for your instant reply.
    Regards,
    Henoy TM.
    +919035752610

  • SharePoint 2013 and SQL Server 2012

    Hi all, 
    I've looked around and not found a concrete answer to this question; or maybe I have and just haven't realised! Anyway.
    We've currently got a license for SharePoint 2013 Enterprise, and are working on introducing Business Intelligence capabilities, namely Power Pivot and Power View. We'd like the data to be refreshed regularly, meaning we need Power Pivot on the SQL Server.
     As Power Pivot and Power View are listed as features for SharePoint 2013 Enterprise, is it enough to have the Enterprise licence for SP2013, and use a SQL Server 2012 Standard License, installing the Power Pivot configuration tool along with the required
    SSRS for Power View? Or do we need a SQL Server 2012 BI / Enterprise License to make use of Power View and Data Refresh on SP 2013?
    I've also seen talks of installing SQL Server 2012 SP1 -- I'm new to all of this, but would having SQL Server 2012 Standard License alongside installing SP1 be sufficient for the above features?
    Many thanks for any help.

    PowerPivot/PowerView do require the BI or Enterprise editions of SQL 2012 (and yes, SQL 2012 SP1 is required for SharePoint 2013).  These instances must be installed on the SharePoint server, not the SQL Database Engine server.  You can use SQL
    Standard for the Database Engine server.
    Trevor Seward, MCC
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • SharePoint 2013 and SQL Server AlwaysOn - HA

    Hi guys,
    Please help!
    I need to setup SP13 server on SQL 2012 AlwaysOn (on sql01 and sql02). The HA AlwaysOn group already configured by DB team on these 2 replica with and called SP_AOAG  alias
    My question is can I use this alias to setup SharePoint  or I need to configure the HA AlwaysOn group for SgharePoint  as suggested in the article below:
    http://blogs.msdn.com/b/sambetts/archive/2013/04/24/sharepoint-2013-and-sql-server-alwayson-high-availability-sharepoint.aspx
    Any advice greatly appreciated . 
    BalaiP

    You do not want to use a SQL Alias with an AG Listener. Just point SharePoint straight at the AG Listener. You will need to manually add any accounts to non-primary instances. You do not need to add them to individual databases, of course. You will also
    need to manually set MAXDOP to 1 on non-primary instances.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Sharepoint 2007 using sql server 2012 database server

    We still have an old SharePoint 2007 farm that runs on SQL Server 2008 and Reporting Services 2008. I would like to migrate this app over to SQL Server 2012. From what I gather SharePoint 2007 supports SQL 2012 if you are running WSS service pack 3 and
    SharePoint server service pack 3 I am already on SP3.  So my question is who all here is running SharePoint 2007 on SQL 2012 and have you had any problems? 

    Yes I have an environment that is SPS 2007 wSP3 and SQL Server 2012, and have been doing this for 2 months. So far, no problems. There have been issies with User Profile services, but those turned out to be unrelated.
    Kind regards,
    Margriet Bruggeman
    Lois & Clark IT Services
    web site: http://www.loisandclark.eu
    blog: http://www.sharepointdragons.com

  • Slipstream SharePoint 2010 and Project Server Installation

    Hello, 
    I have my current farm environment with the below configuration 
    SharePoint 2010 + Project Server which are on SP 2 + Brazil Language Pack
    2 WFE
    2 App
    1 SQL
    We are planning to add more WFE and App server in the existing farm. As per my research I found that we can slipstream CU and language pack install. 
    Would like to know can I slipstream SP2010 + Project server with SP2 along with Brazil language pack in one single go. I did found the article http://social.technet.microsoft.com/Forums/en-US/c6f60e5e-4f07-4e92-a8de-a32924b00ce5/sharepoint-2010-and-project-server-2010-slipstream-install?forum=sharepointadminprevious
    however in this case there was request to setup a new farm but I'm trying to add new server to the existing farm. 
    Can you please suggest the best approach that can be followed to save time to add the new server to the existing farm using slipstream. 
    Thanks. 

    You can do the same per the old thread. Just install SharePoint server, cancel config wizard, install Project Server, cancel config wizard, install LPK, then start Config Wizard and join to farm.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • It is compatible Obi 11g  with Windows Server  2012 and Sql Server 2012?

    Hi every
    Please help with two questions.
    1. - Obi 11g is supported on Windows Server 2012 and SQL Server 2012?
    There a compatibility matrix which mention compatibility with versions 2012?
    2. - is feasible to install Obi 11g in separate server and install weblogic on another server?
    I appreciate the prompt response
    Regards
    Pedro

    Hi Pedro,
    As of November 2012 Compatibility Matrix released by Oracle for OBI 11.1.1.x Windows 2012 and SQL Server 2012 were not supported. It was supported on 2008 Windows and SQL Server.
    We can have weblogic and OBI server's on 2 different machines. The approach is to opt software only install. the link below will give more details:
    http://obieeelegant.blogspot.com/2012/07/obiee111160-software-only-installation.html
    Let me know if this helped.
    Regards,
    Jay

  • Installing BAM with Biztalk Server 2013 and SQL server 2012

    Hello All,
    I have to work on BAM with BizTalk Server 2013 and SQL server 2012 , is BAM already comes with BizTalk server installation ?
    Will I needs to explicitly install that ? from where I can get the installer for BAM ?
    What else I will needs to work on BAM ?
    Note : I want to handle Exceptions in BAM ....how to do that ?
    Thanks,
    Nitin.
    Thanks and Regards, Nilesh Thakur.

    Hi,
    BAM is available with BizTalk, all you need is to select it and install .
    Refer the
    Installation Guide available on MSDN or follow the blog: http://sandroaspbiztalkblog.wordpress.com/2013/05/05/biztalk-2013-installation-and-configuration-important-considerations-before-set-up-the-server-part-1/
    Maheshkumar S Tiwari|User
    Page|Blog|BizTalk
    Server : Scheduling Orchestration using Trigger Message

  • Uninstall SQL Server 2008 Express R2 and SQL Server 2012 unsuccessfully

    HI
    I want to uninstall SQL Server 2008 R2 and SQL Server 2012 but it was successful.
    When I try to uninstall 2008 R2
    It shows the sqlsupport.msi can't find
    Warning 26003.  Microsoft Server 2008 R2 Setup Support Files cannot be uninstalled because the following products are installed:
    SQL Server 2008 R2 SP2 Common Files are installed
    SQL Server 2008 R2 Dabtabase Engine Shared
    Microsfot SQL Server R2 RsFx Driver
    SQL Server 2008 R2 SP2 Database Engine Services
    When I uninstall 2012, it shows the SQL Browser has been installed.
    Warning 26003.  Microsoft SQL sERVER 2012 Setup Support Files cannot be uninstalled because the following products are installed:
    SQL Server Browser for SQL Server 2012

    I tried to uninsall SQL Server 2008 R2 and SQL Server 2012.
    Yes, I did what you said : right click on Microsoft SQL Server 2008 R2 and then uninstall.
    System pop up window says :
    Warning 26003.  Microsoft SQL Server 2008 R2 Setup Support Files cannot be uninstalled because the following products are installed:
    SQL Server 2008 R2 SP2 Common Files are installed
    SQL Server 2008 R2 Dabtabase Engine Shared
    Microsfot SQL Server R2 RsFx Driver
    SQL Server 2008 R2 SP2 Database Engine Services
    I hope you are uninstalling from Add remove program. Can you first uninstall
    SQL Server 2008 R2 SP2 Common Files are installed
    SQL Server 2008 R2 Dabtabase Engine Shared
    Microsfot SQL Server R2 RsFx Driver
    SQL Server 2008 R2 SP2 Database Engine Services
    And then uninstall the
    Microsoft SQL Server 2008 R2
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
    My Technet Wiki Article
    MVP

  • SharePoint 2013 Enterprise and SQL Server 2012 Standard edition vs. Enterprise - feature question

    I can't seem to find any clear answers to the implications of installing SQL Server 2012 standard edition vs. enterprise in regards to SharePoint 2013. 
    I understand that to get many of the features you need Enterprise edition of SQL 2012; but, what I can't figure out is if the backend SharePoint SQL 2012 is standard; but, the PowerPivot/SSRS server is Enterprise will we still get the features?
    If we have 3 tier SharePoint farm, one of those tiers is for the SQL Server database backend.  If that SQL instance is 2012 standard and we add another server to the farm w/ SQL 2012 Enterprise to handle the tabular models, PowerPivot, and SSRS in integrated
    mode will we still get the features?
    Or, can we (should we) install Enterprise 2012 as the SharePoint database backend and let that instance triple down as also the PowerPivot and SSRS instance?
    The Degenerate Dimension

    Hi MMilligan,
    SQL Server 2012 Standard is not supported PowePivot for SharePoint . In addition, SQL Server 2012 Standard is also not support some Reporting Services Features.
    For more information, please refer to Features Supported by the Editions of SQL Server 2012:
    http://msdn.microsoft.com/en-us/library/cc645993.aspx.
    Install SQL Server BI Features with SharePoint 2013 (SQL Server 2012 SP1):
    http://msdn.microsoft.com/en-us/library/jj218795.aspx.
    If you have any problem, please feel free to let me know.
    Thanks.
    If you have any feedback on our support, please click
    here.
    Maggie Luo
    TechNet Community Support

  • SHAREPOINT 2013 WITH SQL SERVER 2012 REPORTING SERVICES - NOT WORKING

    The SQL 2012 with SP1 is installed but the Reporting Services are not working and not able to connect the Sharepoint with it.
    i also TRIED TO install THE ADD-ON (rsSharePoint.msi) but it doesn't connect and show the Sharepoint Mode and cannot connect the Reporting services.
    If I install the Reporting Native feature then the reporting service config displays the Instance else doesn't show and connect to the sql server.
    But I am able to access the Configuration manager and TCP/IP are enabled.
    I have installed SQL 2012 and Sharepoint 2013. Please revert soon.
    Tks - Vinay

    Reporting Service
    http://msdn.microsoft.com/en-us/library/jj219068.aspx
    http://blogs.msdn.com/b/biblog/archive/2012/12/04/installing-and-configuring-sql-reporting-services-on-sharepoint-2013.aspx
    http://blogs.msdn.com/b/psssql/archive/2011/02/18/sharepoint-adventures-setting-up-reporting-services-with-sharepoint-integration.aspx
    http://dinesql.blogspot.in/2010/06/configuring-reporting-services-2008-r2_07.html
    http://www.codeproject.com/Articles/355461/Dynamically-Pointing-to-Shared-Data-Sources-on-SQL
    http://www.heysharepoint.com/problems-with-sql-2012-reporting-services/
    http://andrewcbancroft.com/2012/06/30/troubleshooting-sql-server-2012-reporting-services-and-sharepoint-2010-integration-part-1/
    Please find the helping URL
    Thanks
    Jaison A
    http://infomoss.blogspot.in

  • SharePoint 2013 and SQL Server 2014

    Does SharePoint 2013 supports SQL Server 2014 for Reporting Services, PowerPivot

    Yes it does (or rather, SSRS 2014/PowerPivot 2014 support SharePoint 2013). They also support SharePoint 2010.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Installing SharePoint 2013 with SQL Server 2012 Developer Edition

    Hi,
    Can we use SQL Server 2012 Developer edition with SharePoint 2013?  One thing that came to my mind was setting max degree of parallelism, is that supported in Developer edition?  Looking forward to your assistance here.
    Thanks,
    kashif

    I'm slightly incorrect. See http://download.microsoft.com/download/6/4/A/64A1EC8F-F575-41E1-9D34-821FA9F98F8E/SQL_Server_2012_Licensing_Reference_Guide.pdf.
    Licensing SQL Server for Non-production Use
    The SQL Server 2012 Developer Edition is a full-function version of the SQL Server software—with all the 
    features and capabilities of the Enterprise edition—licensed under the Developer Tools model, which is a “per 
    user” model. One license is required for each person that accesses or uses the software. 
    When using SQL Server software for development, test or demonstration purposes, only the users are licensed 
    and there is no need for a corresponding license for the actual server systems running SQL Server software in 
    this case. 
    As long as only licensed users have access to the software, customers can install as many copies of the software 
    on any number of servers that are used exclusively for development, test or demonstration purposes. This 
    is significant, because it allows customers to run the software on multiple devices (for testing purposes, for 
    example) without having to license each non-production server system.
    But no, as you can see above, you'll have no issues with the software (Developer Edition is Enterprise Edition with licensing restrictions, but no functionality restrictions).
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Maybe you are looking for

  • With new ios7 i can no longer download games

    Hello I updated to ios7 and now i have only trouble. I can no longer download or up date games. If i get emails with a link, i can no longer open the link to a website.....i could go on and on.....but my biggest problem is, that i cant download any g

  • How can I add moble service on itunes?

    It says that I can not use my iphone on my computer because the moble device service. I have tried restarting my phone, computer and even uninstalling and reinstalling itunes on my computer I have run out of ideas please help!

  • No le anda la pantalla, como hago para solucionarlo???

    how can i do if the touch doesn't work? i press my finger on it and it doesn't work !!!!

  • Missing backup on iCloud

    I had 2 iPhones linked to my iCloud back up. There was an old back up for one of them. In the past few days the record of that backup has disappeared. I need to know why

  • Layers / Text Field Problem!

    Hey, whenever i center my designs, after or before - the text fields stay stuck as if the design was still attached to the left side. I viewed in IE and Safari and i got other people to view it. They reported the same issue. Any help would be appreci