Period not open for G/L account

Hi,
Help needed-
While posting goods issue, system gave error message as"Period 011 /2007 is not open for account type S and G/L 600101."
So PGI could not be executed.
How to make period open for accunt type & G/L acc.
In MMRV, current period is 11/2007 and previous period is 10/2007
PLs. guide.
Regards

you have to open the FI and MM posting periods.
Use MMPV, to open the MM period where you can give
the company code
period
fiscal year
press execute > enter.
repeat this process till you come to 02/2008 for your company code. Please take care that you dont go beyond.
Use OB52 to open the FI posting periods for account type S.
regards
sadhu kishore

Similar Messages

Posting period not open for a/c type S and G/L :400020

Hi Gurus,
While posting GR through MB1C, I am getting an error message "Period 009/2009 is Not open for Account type S and G/L:400020".
I also went to table T001B, but could not do much.
Please help.
Thanks,
Kumar

in OB52
+ Valid for all account types
your all account will be opened. otherwise check OMSY for your company code
NHID NCC Housing and Infrastru 2009 6 2009 5 2008 12
change your settings to the above till it is working
Thanks
Rajakumar.K

Fund Managment: Posting period not opened for value type 66

Hi,
I have already opened all the posting periods FM thru' TC: FMIR from period 0 to 16 for all account assignments.
While posting through thru' a customised program (i.e customised program is using FB01) I am getting error 'Period 002/fiscal year 2010 not open for FM posting in value type 66', please let me know why this error inspite of opening all the periods and for all account assignment.
Thanks,
Suresh

hi suresh,
Check this link
FMIR - For fiscal yr based encumbrance, the whole fiscal will be open
Hope it will resolve your question.
Thanks and regards
Praveen.J

Period 001/2010 is not open for account type S and G/L 799999

Hi friends
I am in SD. I am trying to create stock for newly created material, movement type 561. system give error Period 001/2010 is not open for account type S and G/L 799999.
I use the T. Code OB52, i am confuse which combination i.e. variant, A, from Account, To Account, from per. 1 Year, To period, Year, from per. 2 year, To Period, Year, I should choose, can some one send me detail reply and solution which may display after this t. code OB52. I also have questin which movement type i should use.
Using T.Code MMPV, i have created new period (from company code 1000, To Company code 1000, period 01, Fiscal Year 1020.
I was reading previous solution, one of them was i should close period 2009. I tried to do this using using MMPV, i entered fiscal year 2009. Error display The specified year 2009 is not the current calender year.
Thanks
Raj

Hi
Hope you are doing this in test server
If this is a real time issue this needs to be addressed by a FI consultant
First see for your company code what is the posting period varient maintained in OBY6
Say if it is 1000
Then in OB52
Maintain a setting like this
1000-S-BLANK-ZZZZZZZZZZ-1--2010122010-13--201016--2010
Then save it
This is for Account type S that is GL accounts
Preferably maintain the same for A, + , D, K, M, V
Regards
Raja

AUTOMATIC CLEARING FOR RECEIPTS실행시 PERIOD NOT OPEN ERROR

제품 : FIN_AR
작성날짜 : 2004-05-19
AUTOMATIC CLEARING FOR RECEIPTS실행시 PERIOD NOT OPEN ERROR
========================================================
Problem Description
AR에서 Receipt이 "Remitted" 상태임에도
"Automatic Clearing for Receipts"프로그램 실행시 아래와 같은
Error가 발생하면서 처리되지 않음
ARZACS module: Automatic Clearing for Receipts
MSG MSG-01000: DEBUG: Before_Report_Procs.Check_GL_Date.
MSG MSG-05000: DEBUG: GL_Date not within open period.
ERR REP-1401: 'beforereport': Fatal PL/SQL error occurred.
ORA-00000: normal, successful completion
Solution Description
Period가 open되어 있지 않아 발생하는 것으로,아래의 실제 Test과정을
참조.
Automatic Clearing Test step.
1. Trx 입력
GL_DATE 09-JAN-2004
2. Receipt입력
GL_DATE 09-JAN-2004
Maturity DATE 15-JAN-2004
(Payment Method는 Clearance Method가 "by Automatic Clearing"을 가진
Receipt Class를 입력)
3. Remittance 실행
Receipts -> Remittances 에서 Auto Create
4. Clearing실행
Receipts -> Clear/Risk Eliminate에서
"Automatic Clearing for Receipts" 실행
Parameter중 Clear Date 11-JAN-2004로 입력
5. 해당 Receipt이 Clearing안됨.
6. 다시 Clearing실행
"Automatic Clearing for Receipts" 실행시
Parameter중 Clear Date 16-JAN-2004로 입력
7. 해당 Receipt이 Clearing됨.
위의 Test결과에서 알 수 있듯이,
Clear Date는 Maturity Date보다 이후여야 함을 알 수 있다.
또한, Maturity Date가 같은 Period내가 아닌 그 다음 Period, 예를들어 2월15일이라고
해도 Clear Date를 2월 15일 이후로 입력해야만 해당 Receipt이 Clearing되었다.

hi,
pl go to OB52 and open the FI posting period for account type S.
you will find either 1000 or 0001 as the field status variant for which you can select the acccoutn type S. You need to know what is the field status variant for your comp code. You find out by going to OBY6 ( Comp code global settings ).
at OB52 you can maintain this way.
1000 S zzzzzzzzz 1 2008 12 2008 13 2008 16 2008.
regards
sadhu kishore

FB01 Posting period not open

Hi,
I am an abapper, i am trying to check a BDC for the transaction FB01, in the first screen i get the error message "Posting period <year> not open" Can any body tell me how to find out the correct data to be given in the respective fields.
Regards
Narendiran

hi.
I am working on ECC 5.0 sand box-IDES
IN OMSY, my current period is 09 and ABp indicator is flagged.
In OBY6 i have the variant as 0001.
In OB52, for variant 0001, for one of the account assignment, i have
" From Period 1 Year 1996 To period 12 1999 From Period 2 13 Year 1995 to period 16 1995"
How do i make the FI posting current the FY 07 untill 9999?
Because when i try to change the Year as follows
" From Period 1 year 1996 to Period 12 9999 From Period 2 13 Year 1995 to period 16 9999". i get the following " Error" Message.
" Posting periods should not be opened"
Where can i change the setting from " Error" to " Warning" or how do i make the changes in FI to make it current to year 2007.
Due to this , i am unable to do Goods receipt since when i do MIGO, i get the error message " Posting periods not open"
Much appreciated for your response.

Period Not open

Could Someone help me. I am trying to post stock *MB1C and it says posting period not open. I checked *MMPV and *OMSY they both show current period 05.2007. is there any other setting that I have forgooten. MMRV allows back posting. I tried different dates and no luck. Any help is greatly appreciated

Dear Simran,
Kindly note that the posting period in FI thro' OB52 is mainly for controlling any entries posted to the general ledger/AR/AP books of accounts i.e accounting documents.
Whereas the posting period control in MMPV/MMRV is only for controlling the postings to the materials document i.e Inventory management. No link with respect to posting to FI documents. Only material postings are controlled thro MMPV/MMRV. It is very difficult to list all the transactions. It is basically wherever there is an account document generation from other components like SD,MM,PP then the respect period should be open in FI. Similarly wherever there is an movement of materials then the system checks whether the period in MM is open for the movement.
Read the on-line documentation with respect to posting periods in FI under financial accounting as well as thro' SPRO under financial accounting global setting-documents-posting periods IMG documentation.
Similarly under material management for open & close periods in MM.
I hope this information can be help to you.
Please reward points if it useful.
Regards
Ravinagh Boni

Periods not open and No ranges not defined

Hi
When trying to post documents in fb01 or f-43 i get a warning that the period is not open for the year 2008. Earlier I had defined the open and close posting periods for the 1 april 2007 to 31 march 2008.
Even after editing the year I get the errot that the number ranges are not defined for 2008.
How should I fix both these problems

hello,
Create the no ranges for the yerar 2008.
FBN1.
Regards
Ravi

Waveburner does not open in other user account:

Hi,
Im having an issue with Waveburner 1.1.1 not opening in a second account I have on my Mac.
I have one account that I use for everything and another that I use for just music production.
They are both admin accounts. The music account has been working just fine for months with Logic 7.1 - -no problems at all, until I went to use WB today. Ive run it just fine in my everything account but it just stalls with an endless beachball when I go to launch it in the music one.
Today was the first time I launched it in that account so I got the ...is being launched for the first time... blah blah message and just hit OK. After that - spinning ball of death requiring a force-quit. By the way, WB is listed in the force quit dialog as unresponsive.
All AUs passed validation in my everything account but it never got that far in the music one.
Anyway, I did all the standard voodoo - trashed WB prefs, restarted, repaired permissions...
Any clues anyone ?
Thanks,
Dan-
Dual 1.25GHz PPC - FW800
2GB RAM
Tiger 10.4.2
Logic 7.1 - M-Audio 410
Waveburner 1.1.1

If it launches in one account and not the other, then there's something that is account related beyond the WB prefs. There may be some other prefs that are causing WB to grok. If you are validating any AU's, then you may want to see if any of their prefs are corrupt.
jord

Error during goods issue-Posting period not open

Hi ,
I am getting an error during goods issue which says posting period not open.I guess that we have had deliveries that were created and in process while crossing over from one financial period to another quite frequently before, but we were still able to goods issue them in the next period. Can anyone tell me why this error happens and if there is any work around for this?
Thanks,
Hari.

Hi,
Goods issue takes place, say on a given date and this should be updated, so that the plant valuation changes are recorded. But the periods need to opened to do this. Normally there are two posting periods available, one is in MM, done by t.code MMPV and the other in FI, t.code is OB52.
So, in MMPV we need have the current month as the posting period. But in your case it was allowing, probably because you have marked the indicator " allow posting in previous period " in MMRV t.code as our friend just conveyed.
Hope it helps. Please reward if useful.
Thanks & Regards
Sadhu Kishore

How to get list of company codes with current period not opened?

Hi,
How to get list of company codes with current period not opened?
Is there any way we can check whether the current period is opened for all company codes.
If not how, can we generate a report which having information of period and company code. Also please tell me, which table will have info on posting periods and company codes.
Thanks
Vineeth Varghese

Hi,
The MM periods details can be viewed In Table MARV . On the selection screen you have the option of entering the company codes , current period, year current period etc. so make the required entries and you get the all details relevant to MM periods. Also it can be downloaded as a report.Thanks

When iPhone is connected to PC, it shows in itunes but Autoplay does not open for me to copy photos. I tried the Control Panel, changing Autoplay settings but no use. I use a Windows Vista. Please help! All my little ones' pictures are on my iPhone 3GS

When iPhone is connected to PC, it shows in itunes but Autoplay does not open for me to copy photos. I tried the Control Panel, changing Autoplay settings but no use. I use a Windows Vista. Please help! All my little ones' pictures are on my iPhone 3GS.
I tried hard reset on my iPhone. I tried restarting laptop and iPhone. I tried a different laptop. I tried removing driver and reinstalling from Device Manager but did not find a driver other than "Apple Mobile Device USB Driver" under "Universal Serial Bus controllers" which I heard shouldn't be uninstalled.
Anything I haven't tried?
HELP!

A bit confused by your statement
bcboarder wrote:
. I do not understand why the music is clearly on the Ipod but wont reconize it anywhere.
Are you seeing your music listed in the iPod screen, or in Win explorer as in your earlier post?
I can see all the songs in my Edrive>al's Ipod> Ipod Control> Music folder.
A corrupted iPod database, will report zero music used, and have your music size reported as others, so you wont see the music in the iPod screen. Sorry, I thought there was some hope for you with iPodAccess, in recovery of the corrupted iPod database with your ratings.
You can try to borrow and use the Mac Disk Utility ->First Aid ->Repair.
Of course, if your iPod Hardisk is in a bad state, from the Disk Diagnostic report, then all my suggestion are futile.

I got iPhoto '11, version 9.2.3 and want to edit photos using Photoshop elements 10. I have put P'shop 10 as the preferred editor... but when I click on the photo in iPhoto the Adobe p'shop 10 program opens BUT the picture does not open for editing. Wha.

I got iPhoto '11, version 9.2.3 and want to edit photos using Photoshop elements 10. I have put P'shop 10 as the preferred editor... but when I click on the photo in iPhoto the Adobe p'shop 10 program opens BUT the picture does not open for editing. What the heck... I did fine with the old iPhoto and "Shop elements 6... .

Adobe now hides the editor - what looks like it is not - you want the editor hidden in the support folder - see http://forums.adobe.com/message/3955558#3955558 for details
LN

Editor option is not opening for table object

Hi Experts,
I have installed OWB 11.1 on my table machine. The strange thing what i found out that, the 'open editor 'option of Table is not opening for oracle module in the design centre.for other object (Like mapping ..etc) 'Open Editor' option is working fine.I have an project where there are frequent changes in the table structure , but as the open editor option is not working fine. i have to totally re-import mordified table . Do anyone having any idea how to slove this problem.
Regards
Ani

Hi,
Are you by any chance trying to run OWB on a 64 bit client? I have seen similar problems to what you are describing when trying to run OWB on 64 bit Windows. If this is the case you should try to use a 32 bit client machine
Regards
Roald

SAPCAR: could not open for writing SAPCAR (error 28). Text file busy

Hi,
I´m trying to decompress this file( is for a kernel upgrade):
SAPEXE_15-10006264.SAR
And when I do SAPCAR u2013xvf SAPEXE_15-10006264.SAR, SAPCAR only decompress a few files and I´ve this error:
SAPCAR: could not open for writing SAPCAR (error 28). Text file busy
Instead when I decompress the SAPEXEDB_15-10006263.SAR, SAPCAR does this correctly. I´ve tried to download again the file but the error is always the same.Could someone help me?
Best regards,

Hi,
Now, I´ve unpacked the files but when I do the file copy (in order to upgrade the kernel), I´ve these errors:
cp: cannot create /usr/sap/SMD/exe/jcontrol: Text file busy
cp: cannot create /usr/sap/SMD/exe/jlaunch: Text file busy
cp: cannot create /usr/sap/SMD/exe/libicudata.sl.30: Text file busy
cp: cannot create /usr/sap/SMD/exe/libicui18n.sl.30: Text file busy
cp: cannot create /usr/sap/SMD/exe/libicuuc.sl.30: Text file busy
cp: cannot create /usr/sap/SMD/exe/sapstart: Text file busy
cp: cannot create /usr/sap/SMD/exe/sapstartsrv: Text file busy
So could you help me?
Best regards,

Period not open for G/L account

Similar Messages

Maybe you are looking for