Periodic drop of connection to GoDaddy-hosted sites

For the past month or so, I occasionally lose access to any of my sites hosted at GoDaddy. I can connect to any other site, can ping other sites, etc. I can get to the server via IP, but not URL. And then, just as suddenly, I can pull up the site again. It seems to be happening with increasing frequency (four times today, happening right now). I've switched DNS servers from the Verizon ones to DynDNS to Google's, and no luck (and like I said, I can still go to other sites on the Internet.) When I check with http://downforeveryoneorjustme.com/ the server is still up and going (testing with the URL, not the IP address). Anyone else experiencing anything similar with GoDaddy? Or have any ideas. I've tried rebooting the router when it happens, but that doesn't resolve it.
Halllp

#1 Did you trace route to the GoDaddy-hosted site(s)?
#2 If not, please do and show us the results.
This means for example if on Windows XP,
a) Go to Start -> Run.
b) Type in cmd and press enter.
c) In the new window type in tracert google.com and press enter.
^^
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Similar Messages

AP periodically dropping his connection to WLC

Hello ,
I have problem with AP 1262 witch periodically lose his connection to the controller.
I have this situatuion. One WLC 5508 and two 1242 dual band controller based APs.One AP 1242 is connected to the controller through fiber link.The other AP1242 is connected to WLC through first AP on 5GHz Wireless Backhaul.First one is RootAP and second one is MeshAP.WIreless link between two APs have SNR=40dB and distance is no more than 30 metres(100 feet).Antennas used in this case is directioanl 5GHz "AIR-ANT5160NP-R" with gain 6dBi.
MeshAP have an IP and have alreaday downloaded IOS image and configuration from WLC. MeshAP is working fine when he si connected with WLC , and client can gain access two WLAN.
However the MeshAP is periodically dropping his connection to WLC.(once every 4-5 hours).
This is part of the log generated by the WLC before loosing connection with MeshAP:
*apfReceiveTask: Dec 01 10:41:08.199: %RRM-3-RRM_LOGMSG: rrmChanUtils.c:290 RRM LOG: Airewave Director: Could not find valid channel lists for 802.11bg
*spamApTask1: Dec 01 10:37:54.022: %CAPWAP-3-ECHO_ERR: capwap_ac_sm.c:5416 Did not receive heartbeat reply; AP: 00:08:30:70:97:70
*apfReceiveTask: Dec 01 08:47:30.943: %RRM-3-RRM_LOGMSG: rrmChanUtils.c:290 RRM LOG: Airewave Director: Could not find valid channel lists for 802.11bg
*spamApTask1: Dec 01 08:43:56.610: %CAPWAP-3-ECHO_ERR: capwap_ac_sm.c:5416 Did not receive heartbeat reply; AP: 00:08:30:70:97:70
*apfReceiveTask: Dec 01 07:28:50.498: %RRM-3-RRM_LOGMSG: rrmChanUtils.c:290 RRM LOG: Airewave Director: Could not find valid channel lists for 802.11bg
*spamApTask1: Dec 01 07:25:38.994: %CAPWAP-3-ECHO_ERR: capwap_ac_sm.c:5416 Did not receive heartbeat reply; AP: 00:08:30:70:97:70
*apfReceiveTask: Dec 01 06:28:26.299: %RRM-3-RRM_LOGMSG: rrmChanUtils.c:290 RRM LOG: Airewave Director: Could not find valid channel lists for 802.11bg
*spamApTask1: Dec 01 06:25:02.186: %CAPWAP-3-ECHO_ERR: capwap_ac_sm.c:5416 Did not receive heartbeat reply; AP: 00:08:30:70:97:70
*apfReceiveTask: Dec 01 00:07:47.769: %RRM-3-RRM_LOGMSG: rrmChanUtils.c:290 RRM LOG: Airewave Director: Could not find valid channel lists for 802.11bg
*spamApTask1: Dec 01 00:04:39.750: %CAPWAP-3-ECHO_ERR: capwap_ac_sm.c:5416 Did not receive heartbeat reply; AP: 00:08:30:70:97:70
*apfReceiveTask: Nov 30 17:05:40.975: %RRM-3-RRM_LOGMSG: rrmChanUtils.c:290 RRM LOG: Airewave Director: Could not find valid channel lists for 802.11bg
*spamApTask1: Nov 30 17:02:23.102: %CAPWAP-3-ECHO_ERR: capwap_ac_sm.c:5416 Did not receive heartbeat reply; AP: 00:08:30:70:97:70
*apfReceiveTask: Nov 30 07:08:58.755: %RRM-3-RRM_LOGMSG: rrmChanUtils.c:290 RRM LOG: Airewave Director: Could not find valid channel lists for 802.11bg
*spamApTask1: Nov 30 07:05:28.818: %CAPWAP-3-ECHO_ERR: capwap_ac_sm.c:5416 Did not receive heartbeat reply; AP: 00:08:30:70:97:70
*apfReceiveTask: Nov 30 04:09:30.046: %RRM-3-RRM_LOGMSG: rrmChanUtils.c:290 RRM LOG: Airewave Director: Could not find valid channel lists for 802.11bg
*spamApTask1: Nov 30 04:06:12.370: %CAPWAP-3-ECHO_ERR: capwap_ac_sm.c:5416 Did not receive heartbeat reply; AP: 00:08:30:70:97:70
*apfReceiveTask: Nov 29 19:04:58.763: %RRM-3-RRM_LOGMSG: rrmChanUtils.c:290 RRM LOG: Airewave Director: Could not find valid channel lists for 802.11bg
Any help would be appreciated.Thanks in advance.

Why are you using 802.11a as a backhaul? 802.11a may have the speed but the range of the 802.11a is not good. Now you said that you are using the 5060NP-R antenna on the 1260 side, now what antenna is being used by the RootAP?

Connection to MySQL on GoDaddy hosted site

I have a site set up with PHP and MySQL (by following David
Powers book - exellent). Everything works fine on my localhost, but
when I try to use the remote site to view a page containing MySQL
data all that comes up is a blank page. I have added a line of code
at the top of the page to show errors and still nothing shows -
just a blank page. I am able to see the database and tables via the
PHP admin but not via a page from my site. In the connections
folder I have changed the name of the host name on the remote site
to be what GoDaddy info page indicates. In a call to GODaddy help
they said everything is set up OK but there is a problem with my
code. I am sure that must be true - I just don't know what to do.
I appreciate your help,
thanks,
Bill

I was never able to set up a remote connection with GoDaddy,
that's not
say it's impossible.
My workaround (thanks, Murray) was to work with a local
connection and
at a later date export the local data to the remote DB. I
used mysqldump
from the Mac terminal to export the data.
Mick
MontanaBill wrote:
> I have a site set up with PHP and MySQL (by following
David Powers book -
> exellent). Everything works fine on my localhost, but
when I try to use the
> remote site to view a page containing MySQL data all
that comes up is a blank
> page. I have added a line of code at the top of the page
to show errors and
> still nothing shows - just a blank page. I am able to
see the database and
> tables via the PHP admin but not via a page from my
site. In the connections
> folder I have changed the name of the host name on the
remote site to be what
> GoDaddy info page indicates. In a call to GODaddy help
they said everything is
> set up OK but there is a problem with my code. I am sure
that must be true - I
> just don't know what to do.
> I appreciate your help,
> thanks,
> Bill
>

Problem Uploading with CyberDuck to GoDaddy host site

I created an iWeb site that looks and functions fine on my computer (10.5.8). I successfully uploaded it with Cyberduck (3.2.1) to be hosted by GoDaddy on a domain I own. At that point, everything was lovely. Then, I revised the site in iWeb on my computer. When I uploaded it to GoDaddy with Cyberduck (overwriting the previous version of the site), most of the online pages had lost some formatting and many of the links no longer worked properly. At that point, the revised iWeb site on my computer still looked and functioned fine. GoDaddy help did some troubleshooting and concluded that the problem is with iWeb or Cyberduck.
I'm stuck. Any ideas?

Tom,
Please click on "The Concept" button to notice margins and spacing on that page. On most pages, the "Order" and "Contact" buttons in the box at the bottom of the page don't work. The titles in the "Archives" section don't link to the articles as they did in the iWeb version on my computer. What can I do to avoid these errors in future uploads?
Also, is there something I can do differently to make the brief "Welcome" QuickTime video (on the home page) work on IE?
I expect to add/change the site every couple of weeks. Is there a way to upload just the changes and not overwrite the whole site?
I value your help very much. Thank you for taking the time.

I can't load godaddy hosted sites since updating to firefox 6.02, this happened with 5.0 as well

I'm running Windows 7 sp1 64-bit on a Core2 Duo E4500 processor with 2 GB ram. Since upgrading to Firefox 6.02, I can't open sites hosted by GoDaddy.
They don't give an error, or any information at all. All I get is a white, blank page. There is no code behind it when I 'view source'.
This happened when I upgraded previously to version 5.0 also.

Do a malware check with some malware scanning programs. 
You need to scan with all programs because each program detects different malware. 
Make sure that you update each program to get the latest version of their databases before doing a scan. 
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
*http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Linksys ea3500 dropping wireless connection

Hello,
I have a very frustrating problem. I am using a brand new Linksys EA3500. We have 2 laptops connecting to it. One is an older XP machine which never has any problem. The other, a Vista machine, periodically drops the connection to the internet when connecting wirelessly. It never loses the connection to the Linksys EA3500 router, it just says "Access: local" and there is no internet. If I plug the Vista machine in wired to the router it works fine. I've tried my old router and I don't get this problem, which leads me to believe that my wireless adapter is functioning properly on the Vista machine.
When the vista machine drops the internet, I can still get into the router configuration at 192.168.1.1, but when I click on the tab which says wireless it sometimes says: "Router not found. You are not connected to your router." It says this despite the fact that I am connected to the router???
I've tried reinstalling Windows, that didn't make any difference. I am convinced that it is a problem with the router, but I can't find any settings to adjust which remedy the situation. Of coarse, I've tried reseting my modem and Router many times...doesn't resolve the issue. I've also gone into DOS and done an ipconfig release_all and renew_all.
I work in IT and I understand the basics of TCP/IP and DHCP. When I connect wired with the vista laptop my ip is 192.168.1.112, when wireless it is 192.168.1.142. Please advise.
Thank you

Are you using the classic firmware or the linksys smartwifi? If the other laptop is working fine, I would say that the router is working fine. But to make sure that everything all things are covered, try to change the wireless settings of the router as well as update the adapter on the laptop that’s experiencing the problem. For the wireless settings of the router, you may try: channel width: 20MHz only; channel: 1, 3, 6, or 9; security: wpa2 personal.

Multiple Sites w/ GoDaddy Host

I created a website with iWeb, bought a domain name and hosting space from GoDaddy, published the site to a folder and uploaded it to GoDaddy with Fetch. Everything worked fine. I created another user account on my computer as a way to create another website with iWeb and keep it separate from the first one (a suggestion I got on these boards, by the way), created my site, bought another domain name from GoDaddy for that site, and now I want to upload it to my GoDaddy hosting space (the hosting account I got allows you to upload many sites to it if you want to). My concern is that when you upload the site that iWeb created from the published folder, you upload the index.html file and the folder iWeb created with the files for your site. iWeb always creates an index.html file for each web site. So there is already a file in my hosting space called index.html. When I upload the second site, is that going to somehow confuse or mess up the first one?

When you go to godaddy.com and click on the link that tells you about their various hosting plans, they have a comparison of plan features. They have Economy, Deluxe, & Premium. The last two allow Unlimited Sites and describe this as "Multiple Websites may be hosted within a single hosting account sharing the same disk space and bandwidth quotas."
I have one site up there under a domain name, so there is an index.html file and a folder with all the other files for that site. I bought another domain name for my second site, but I'm not sure yet how they will be differentiated when they are sharing the same disk space. My concern is that when I upload the second site, it too will have an index.html file that needs to go up, and will that overwrite the first one already up there and mess up that first site?
This is my first time using a program like iWeb to make a site. In the past (and that was a long time ago) I wrote my own html from scratch, and had control over what I named that first page that pointed to all the others.

Since Updating to 10.9.5 Safari and the App Store drop internet connection periodically while other apps Mailplane and Epic Browser continue to work ?

Hello.
Since Updating to 10.9.5 Safari and the App Store drop internet connection periodically while other apps Mailplane and Epic Browser continue to work ?
Never had this problem previously running a Macmini Server 2010 with the latest Mavericks Updates
Tried reinstalling over my existing OS and seemed ok until I once again updated to the latest security and Safari updates
Any ideas ?
Using ethernet but wireless acts same,
Cliff

I also forgot to note that this problem also persists with the new iBooks application. I cannot get past the 'Get Started' screen or access the iBooks Store. Again, all top bar menus are unresponsive.
DT

FTP to godaddy host from within china with Trial CS3 DW

As per my topic summary FTP upload to my godaddy hosting is
just not happening; cant even obtain a connection to the server
upon test with multiple trial and error attempts with different
settings. I am 80 % confident Ive done all correct, but can anyone
shed some light on any situation specific fixes or share any
knowledge if you have been in this situation? Thanks.

can you view the godaddy site or other sites hosted with them
in a browser?
http://www.google.com/search?hl=en&ie=ISO-8859-1&q=godaddy+china+block
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

AEBS Dropping Internet Connection q 45 minutes

I have the new airport extreme base station. I bought it January and it has worked flawlessly for the past 6 months. recently, in the past week or so, I began getting a dropped internet connection happening every 45 minutes or so.
About my set up:
Cable modem supplying connection to AEBS via ethernet. VOIP box connected to AEBS via ethernet getting internet connection from AEBS. Playstation 3 connected via ethernet to AEBS. Airport Express base station linked to airport extreme base station wirelessly (of course) to share printer connection via USB. iBook G4 1.2ghz running Mac OSX 10.4.9
Trouble Shooting.
Originally I would unplug the cable modem for 30 seconds and plug it back in. This would reset the connection and i would have service again for 45 minutes. I decided to test whether or not it was the router or modem that was kicking me so I unplugged the ethernet cable coming from the modem to the AEBS and plugged it directly into my computer and turned off my airport connection, essentially hardwiring the ibook directly to the modem. I got kicked off again. At this point i drew the conclusion that it was the modem and contacted my cable company. After a bunch phone conversations that essentially accomplished nothing, they sent a tech out to my house. He replaced my old (3 years) cable with a brand new one to test out. I left my computer wired directly via ethernet to the new modem and this time DID NOT receive any drops in connection over a period of 4 hours. I reconnected the ethernet cable from the modem to the AEBS and reset my connection and decided to test out wireless. It dropped me again in 45 minutes. I left the cable modem connected to the AEBS via ethernet and unplugged the ethernet cable coming out of the AEBS that gos to my VOIP box and plugged my computer into the AEBS via ethernet and disconnected from airport on my computer. I was again dropped in 45 minutes. I reset my modem and unplugged the ethernet cable coming out of AEBS that gos to my Playstation 3. Again I was dropped within 45 minutes. After that, I reconnected both the PS3 and VOIP box ethernet cables and unplugged my computers ethernet cable from the AEBS and have just been using the wireless connection and resetting the modem every 45 minutes when it drops. Oh yeah and I forgot to mention that I plugged the Playstation 3 directly into the cable modem via ethernet and played online for 4 hours without interruption/disconnect. Anyways, I am back to square one. I believe based on the evidence above that the problem lies within the Airport Extreme base station router some how, but I have no idea what the problem is.
What happens when my connection is dropped:
I can be doing anything from using an instant messaging service to trying to load a web page using firefox or safari. Basically the page fails to load, i get a message saying it can't find the server. Usually at this point I will open up network utility and try to ping yahoo.com. It doesn't ping and says it can't find the server. I go to the modem and unplug the power for 30 seconds and replug it back in. As soon as everything back up I have my connection back.
What the cable company did:
They looked at their connections, including the fiber optic node for the area. They did not find any outages or problems within their system. They plugged my coxial cable into a modem/tester box (not sure exactly what it was) to evaluate signal received via coxial cable which they said was working properly. they checked my cable connection from house to street and didn't find any compromises in the wire/cable.
I have downloaded and installed the latest firmware for my AEBS. I am out of ideas. Can anyone help?
ibook G4 Mac OS X (10.4.3)
ibook G4 Mac OS X (10.4.3)

I had the same problem earlier this year with my cable carrier. At first I thought it was the modem so I replaced the Dlink with an Apple Extreme and it still kept happening. After some research on MacInTouch I found that using an earlier version of the base station software made the problem go away. So I never updated and all was well with the world. Till last week and now like you I am dropping connections every hour or so no matter what application I am running or what site I am on the internet.
A friendly tech admitted to me that there was a problem with the way the modem communicates with the provider and that they were aware of the problem but that there was nothing he could do to help me.
That is when I cured the problem temporarily by using the base station software from 2004. If I find an answer to the return of the problem I will post it. Please let me know if you find a solution.

Internally hosted sites slow to load through proxy...

Hi Everyone,
We're having some issues with internally hosted sites and apps loading slowly while on the internal network. We host a Moodle site, a Joomla site, an Exchange 2007 mail server (sorry, no more GW), and a Senior Systems server. All of these, except for the Joomla site, have an SSL cert from either GoDaddy or Verasign. If you're outside of our network the sites load just fine.
We're running a Netware 6.5 SP2 box with BM 3.8 on it and use the proxy. We use both IE 8 and Firefox (from 3.0 to 3.6) with either manual proxy settings with exemptions for the above sites, or a PAC file with the same exemptions. I don't believe the PAC file is the issue as the slowness still happens when configuring the proxy manually within the browsers. When a user tries to go to one of the above sites while on our network, the pages won't load for around 5-10 seconds. The browser will say it's connected to the site, but it just sits - and then the page will just pop into place. The Senior Systems server is particularly bad, as at times only the background color loads and a few minutes later the login box will load.
We have our DNS and DHCP servers running on Windows Server 2003 boxes.
Thanks in advance,
-CR Hiestand

On 01/21/2010 02:36 PM, hiestandc wrote:
>
> Thanks for the reply.
>
> 1. No, we don't use the reverse proxy. External users go through the
> firewall, but not the proxy. We currently use the forward proxy for
> anything going over a web protocal, but have exempted the internally
> hosted servers within the browsers from doing so - which works, but it
> extremely slow.
>
> 2. No, they resolve to the local IP address.
>
> 3. We do use filters, but nothing related to internal sites.
>
>
so if i understood correctly, you do not use proxy to access this sites
from inside, correct?
But traffic is still going thru bm, correct?
otherwise i do not understand why bm is on blame of the slowness. As
logn as you do not use the proxy, bm is not involved.
Best approach will be to take a lan trace and see where the delay happens.

Hosting site recommendation to replace mobileme

Now that mobile me will be obsolete in a year, I was hoping for suggestions for a hosting site that will support iweb. I have 7 mobile me accounts and 4 of them host non-profit websites, each with several thousand photos (linked to my mobileme). You can imagine my concern when I learned apple was dropping mobile me and icloud will not be hosting websites. Is there a way to transfer websites and the photos without interruption? Also, I have read that hosting sites, such as godaddy, will not work with items such as the iWeb hit counter, is there a way to utilize all that iweb can offer? I can not believe this happened, I am happy with the way things are, this will really be a drag.
THANKS! SJB

You might look at the HostExcellence.com Ultimate Business Package which, for $7.95/mo. offers 3 free domain names, unlimited storage and bandwidth, email addresses with aliases, Linux hosting and outstanding 24/7 ear-to-ear (telephone) customer support. It also has a basic package with 1 free domain name for $3.95/mo. If you have your own domain name you might go with it as you could publish all your sites to the one domain name account and point the existing domain names to them.
I moved my sites to it and am very happy with the decision to do so.
OT

Airport Extreme drops internet connection several times a day

I have an AE that is about 3 years old and it has worked great until the last two weeks or so. Over the last few weeks it will be working fine and then drop my connection for no reason. I will get an amber light on the AE although the cable modem stays connected. It is as if the AE is rebooting itself about a dozen times a day for no reason. I was looking around a bit and I see several things in the log at the same time that say:
Jul 10 10:09:47 Severity:5 Connection accepted from fe80::21c:b3ff:fe71:762f%bridge0:49424.
but I am not sure what (if anything) that means. I have a Mac, Win & PC, XBox, PS3, Two IPhones, and an IPad connected to it if any of that matters. I also make sure the AE is sitting out in the open with plenty of airflow to stay cool.
What do I need to do to make the connection more stable? Is there a way of reloading the firmware on the AE to see if that will help?
Thank you for any help.

ElksSS01, I have the EXACT same problem with my Airport Extreme but, I am 100% certain it is my service provider... The problems started for me back in March of this year, I've replaced my cable modem 3 times, Bought a new Belkin Router (didn't work either), had technicians come out to my house 4 times and FINALLY they found that they are reading voltage on the COAX line into my house, they traced it all the way back to their junction box in my neighbor hood so I asked my neighbors if they were having similar issues with the same service provider, which they were... So now I am back to using my Airport Extreme again, but using the Logs to keep track of how many times the connection drops...
When your internet goes down, try observing the cable modem, there should be a CABLE LED indicator, if it is not on SOLID while your connection fails then it is more than likely your service provider... Below is exactly what happens to mine...
1) no connectivity from any device, wired or wireless
2) cable light on modem turns completely off
3) cable light begins to blink
4) cable modem reestablishes a connection to the internet
5) AE light goes from solid green to blinking orange for 2-3 seconds
6) AE light goes back to solid green and all is well, for about 45 minutes in my case
I would definitely do what Bob Timmons sad above as I also thought it was my router and jumped the gun to buy a new one, only to find out it wasn't my router after all... Before you replace your AE though, I would check with your service provider... In my case, whenever I called them they said that my modem and everything looked fine on their end... In the event their is voltage getting fed back into your modem via the COAX, the only way they will be able to tell is by checking the lines, and tracking it back to where ever the faulty equipment is located...
Here is what I am dealing with, this crap gets VERY annoying... (removed ISP address for obvious reasons) and this isn't my entire log, actually it isn't even a quarter of it... Every day, I drop a connection at least 20 times... The log I keep is NOTHING but what you see below...
Jul 05 14:37:42 Severity:5 (WAN) link state is Down.
Jul 05 14:37:54 Severity:5 (WAN) link state is Up.
Jul 05 14:37:54 Severity:5 Internet Configuration leased -- host
Jul 05 15:12:42 Severity:5 (WAN) link state is Down.
Jul 05 15:12:53 Severity:5 (WAN) link state is Up.
Jul 05 15:12:53 Severity:5 Internet Configuration leased -- host
Jul 05 16:00:58 Severity:5 (WAN) link state is Down.
Jul 05 16:01:10 Severity:5 (WAN) link state is Up.
Jul 05 16:01:10 Severity:5 Internet Configuration leased -- host
Jul 05 16:42:33 Severity:5 (WAN) link state is Down.
Jul 05 16:42:44 Severity:5 (WAN) link state is Up.
Jul 05 16:42:44 Severity:5 Internet Configuration leased -- host
Jul 05 17:47:48 Severity:5 (WAN) link state is Down.
Jul 05 17:48:00 Severity:5 (WAN) link state is Up.
Jul 05 17:48:00 Severity:5 Internet Configuration leased -- host
Jul 05 17:58:34 Severity:5 (WAN) link state is Down.
Jul 05 17:58:46 Severity:5 (WAN) link state is Up.
Jul 05 17:58:46 Severity:5 Internet Configuration leased -- host
Jul 05 18:07:54 Severity:5 (WAN) link state is Down.
Jul 05 18:08:06 Severity:5 (WAN) link state is Up.
Jul 05 18:08:06 Severity:5 Internet Configuration leased -- host
Jul 05 18:26:34 Severity:5 (WAN) link state is Down.
Jul 05 18:26:45 Severity:5 (WAN) link state is Up.
Jul 05 18:26:45 Severity:5 Internet Configuration leased -- host
Jul 05 18:46:47 Severity:5 (WAN) link state is Down.
Jul 05 18:46:59 Severity:5 (WAN) link state is Up.
Jul 05 18:46:59 Severity:5 Internet Configuration leased -- host
Jul 05 19:59:11 Severity:5 (WAN) link state is Down.
Jul 05 19:59:23 Severity:5 (WAN) link state is Up.
Jul 05 19:59:23 Severity:5 Internet Configuration leased -- host
Jul 05 20:10:11 Severity:5 (WAN) link state is Down.
Jul 05 20:10:23 Severity:5 (WAN) link state is Up.
Jul 05 20:10:23 Severity:5 Internet Configuration leased -- host
Jul 05 20:24:52 Severity:5 (WAN) link state is Down.
Jul 05 20:25:03 Severity:5 (WAN) link state is Up.
Jul 05 20:25:04 Severity:5 Internet Configuration leased -- host
Jul 05 20:41:50 Severity:5 (WAN) link state is Down.
Jul 05 20:42:02 Severity:5 (WAN) link state is Up.
Jul 05 20:42:02 Severity:5 Internet Configuration leased -- host

Remote access VPN client gets connected fails on hosts in LAN

Hi,
VPN client gets connected fine, I have a inter VLAN routing happening on the switch in the LAN so all the LAN hosts have gateway IP on the switch, I have the defult route pointing to ASA inside interface on the switch, the switch I can reach after Remote Access VPN is connected how ever I cannot ping/connect to other hosts in the LAN and if I make the gateway point to the ASA then that host is accessible, any suggestions? I really want to have gateway to be the Switch as I have other networks reachable through the Switch (Intranet routing)

Hi Mashal,
Thanks for your time,
VPN Pool(Client) 192.168.100.0/24
Internal Subnets 192.9.200.0/24(VLAN 4000) and 192.168.2.0/24 (VLAN 1000)
=============
On the Switch
=============
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route
Gateway of last resort is 192.168.2.5 to network 0.0.0.0
     172.32.0.0/24 is subnetted, 1 subnets
C       172.32.0.0 is directly connected, Vlan101
C    192.168.200.0/24 is directly connected, Vlan2000
C    192.9.200.0/24 is directly connected, Vlan4000
S    192.168.250.0/24 [1/0] via 192.9.200.125
S    192.168.1.0/24 [1/0] via 192.9.200.125
C    192.168.2.0/24 is directly connected, Vlan1000
S    192.168.252.0/24 [1/0] via 192.9.200.125
S*   0.0.0.0/0 [1/0] via 192.168.2.5
===============
On ASA
===============
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
       i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
       * - candidate default, U - per-user static route, o - ODR
       P - periodic downloaded static route
Gateway of last resort is 172.32.0.2 to network 0.0.0.0
C    172.32.0.0 255.255.255.0 is directly connected, outside
C    192.9.200.0 255.255.255.0 is directly connected, inside
C    192.168.168.0 255.255.255.0 is directly connected, failover
C    192.168.2.0 255.255.255.0 is directly connected, MGMT
S    192.168.100.2 255.255.255.255 [1/0] via 172.32.0.2, outside
S    192.168.100.3 255.255.255.255 [1/0] via 172.32.0.2, outside
S*   0.0.0.0 0.0.0.0 [1/0] via 172.32.0.2, outside
We don't need route print on the PC for now as I can explain what is happening I can get complete access to the 192.168.2.0/24 (VLAN 1000) but for 192.9.200.0/24 (VLAN 4000) above from the switch I can only ping IP's on the switches/pair but cannot have any tcp connections, which explains the default route being pointed on the switch is on VLAN 1000, now my issue is How do I get access to VLAN 4000 as you can see these two are on different Interfaces/zones on the ASA and please note with default gateway pointing to ASA I will have access to both the VLAN's it is only when I move the gateway pointing to Switch I loose tcp connections to one VLAN depending on the default route on the being pointing to on the switch.
So we are left to do with how to on the switch with default route.

The grace period for the Remote Desktop Session Host server has expired

I'm running Windows Server 2012, we only have 1 server and it's a DC. I'm trying to RD to the server from my Windows 7 laptop. It was working fine on Friday but when I came in on Monday I got message saying that 'The remote session was disconnnected
because there are no Remote Desktop License Servers available to provide a license'
So after a bit of digging I found out my 'grace period' had expired, so ordered a new license which I got today, installed this all ok but still i cannot connect via RD I get the same message....went into the RD License Diagnoser and it said the problem
was as follows
'The grace period for the Remote Desktop Session Host server has expired, but the RD Session Host server has not been configured with any license servers. Connections to the RD Session Host server will be denied unless a license server is configured for
the RD Session Host server.'
Suggested Resolution as follows
Configure a license server for the Remote Desktop Session Host server. If you have an existing license server, specify that license server for the RD Session Host Server. Otherwise, install RD Licensing on a computer on your network and Configure RD Session
Host Server to use it.'
I cannot figure out how to do this as I cannot find the RD Session Host Server tool.
Can any of you lovely people help me please

Hello,
Best option would be to assign the license server by using AD GPO. Youl will need to configure the following:
Computer Configuration\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Licensing
and define the settings for:
Use the specified Remote Desktop License Server
Set the Remote Desktop Licensing mode
Then assign the policy tho your server.
regards Robert Maijen

Periodic drop of connection to GoDaddy-hosted sites

Similar Messages

Maybe you are looking for