Periodic posting contracts - do postings just for certain business partner

Hello,
with the program RFRERAPP the periodical posting for contracts is done.
Based on the selection parameter you can select the contracts, but the posting run is always done for the whole contract.
Here we have the requirement that they just would like to do the postings for certain business partners, as they want to run the postings per business partner each month.
That of course include the situation that they have conditions assigned to different business partner on one contract.
Within the BADI BADI_RERA_DOC - BEFORE_POST you have the possibility to change the posting data. The posting data are hand over in the table CT_ITEM.
I did delete those postings in the table which are not desired. But this results in an error messgae within the output of the RFRERAPP program.
Message:
RE-Document without posting data
Message: RERACA011
Does anybody have an idea whether it is possible to skip certain postings during the period posting run via RFRERAPP ?
Perhaps it is necessary to divide the whole posting process in seperate steps and write a complete new posting program.
OR
Is it really the right way to handle this request ?
Do you see any other functional chance to deal with this customer request ?
Best regards
Michael

Hi Michael,
I'm afraid the BADI BADI_RERA_DOC is not suitable for your requirement. This BAdI is not thought for this purpose.
With Ehp4 there is an additional select option available for RERAPP for the condition type. So I guess this will also not meet your requirement.
You may either create a customer specific program for posting or do a modification of RERAPP . Modification of RERAPP is not that easy because you have to insert the select option and then pass it through the program calls to the method where the cash flow is read.
And please be aware that modication issues are not handled by SAP support.
Regards, Franz

Similar Messages

  • MIGO / MB01 - Barcode scenario for archiving just for certain plants

    Dear Experts,
    I'm trying to activate the barcode scenario for archiving delivery notes when posting a goods receipt. We are working with several plants but the barcode scenario should be activated just for certain plants .
    Does anyone have an idea how I can use barcode scenario for certain plants?
    Thanks in advance!
    Petra Hönnemann

    Hi Petra,
    not sure, if your question already had been answered. But if not, I think what you need is to create documenttypes for each plant. Also create different Contenet Reps and link them to the corresponding documenttype. In TA OAC5 you can activate the barcode scenario for each plant.
    Regards,
    Lu

  • Error while changing the PO BOX value for a Business partner

    Hi Friends,
    We are getting an error when we try to change the PO Box value for a Business Partner.
    We have the dependency like when we give the value for the PO Box we also need to give the postal code value. And also we have a specific format for the Postal code. We gave both the values (a valid postal code) and try to save the details, then error message "The attribute GUID of Organization (a Contact Person is assigned to) of the Business Object contact person is not valid" is displayed. We have no clue why there is a conflict for the contact person details.
    Can any one suggest the reason for this?
    Thanks & regards,
    Swarna Seeta

    Hi Swarna,
    You are getting this message not because you have entered wrong Post code .It will come even if you try to change some other field and save it. This is because on saving a business object, the framework tries to validate all the associated objects depending on the relation.In this case the data in the mobile client is either not present or is no longer valid.
    Check if the field of the Business object which is being shown as invalid, has some data in the table. Check the combo associated to it and from where the combo is doing the validation. The table from where the combo is doing the validation does not have that data and so the value is invalid.
    Also compare the number of entries in smokna1sht table in ides and in CDB.
    Regards
    Vivek

  • Set order block for new business partner

    Hi experts,
    I have the requirement to set the order block for a business partner (based on some attributes) at the moment when it will be created or changed.
    I tried to use the BAdI BUPA_GENERAL_UPDATE where I am using the FM CRM_BUPA_FRG0050_READ/ CRM_BUPA_FRG0050_GET_DETAIL to retrieve the already existing status data and the FM CRM_BUPA_FRG0050_CREATE/ CRM_BUPA_FRG0050_CHANGE to add or change this data.
    In the SAPGUI at least the update scenario (CRM_BUPA_FRG0050_CHANGE) is working.
    In the WebUI application none of the both is working: In the create scenario the application is even dumping (SAPSQL_ARRAY_INSERT_DUPREC) but this dump happens in an other implementation of this BAdI!
    In the BP update scenario nothing happens though the UI will be refreshed by some coding like
    lr_bol_core = cl_crm_bol_core=>get_instance( ).
    lr_bol_core->modify( ).
    Is there something wrong or missing or is there a better BAdI to achieve this requirement?
    Thanks for any help!
    Regards,
    Wolfhard
    PS: I found another post which covers exactly my requirements but unfortunately without a solution...
    [Re: Update of BP General Data during creation of BP]

    Hi Bruce,
    I propose to select the right value programmatically and then hide the original combo box (use the FromPane / ToPane properties - better don't disable it or make it invisble) and display a disabled EditText item which displays the pricelist which should be applied to new customers when the Form is switched to - or launched in "Add" mode.
    When the form is switched to other modes than "Add" reactivate the original ComboBox...
    HTH,
    Frank

  • To Get the list of sales orders for a Business partner in CRM.

    Hi all
    Is there any Function module or BAPI to get the Sales orders for a Business partner in CRM. I know there is a BAPI to get the list of sales orders for a customer in ECC, but I donu2019t know how to get the list of sales orders for a Business Partner in CRM.
    Can anybody tell me if there is an inbuilt function module or BAPI available?
    If not how can I pick the sales orders of a business partner in CRM? Between which tables should I apply a join and write SELECT statement to get list of sales orders for a business partner in CRM.

    Hi Jessica,
    Try CRM function module CRM_BUPA_READ_ORDER_OBJECTS.
    You'll get a table with the documents associated to that partner, where you can work on.
    Kind regards.

  • Count of number of campaigns executed for a business partner?

    Hi all
    I'm hoping someone can advise me on how to fulfil this requirement. Basically I need to find a way of ensuring that customers are only included in a maximum of five campaigns per month.
    My current idea centres around
    1) Creating an interaction object for each business partner every time they are included in an executed campaign
    2) To execute a custom-developed program (or a BW query?) that will count the number of interaction objects created per business partner in the past month and write the count value to a marketing attribute called "campaign count" assigned to each business partner
    3) Exclude any business partners with "campaign count" >=5 from the target group of future campaigns
    I'm sure there's a cleaner and better way of doing this. Can anyone point me in the right direction?
    Thanks
    Mike

    Greetings from ABAP General.
    Please do not leave meaningless comments when closing age old threads only to make room for new ones.
    The comment box can be left empty. Only fill it when you have something to say about the solution that might help the community.
    Thanks
    Thomas

  • Marketing attributes for a business partner

    Hi,
    how can I input marketing attributes for a business partner with a BAPI?
    Or can I use BATCH-INPUT (the transactions is "BP")?
    Thanks and best regards.

    Hi JoJo,
    I don't know about LSMW. But I have done something similar in a program by calling the following function module in a loop for each of the business partner:
    CALL FUNCTION 'CRM_MKTBP_CHANGE_BP'
          EXPORTING
            IV_PROFILE_TEMPLATE_ID = lv_attribute
            IV_PARTNER             = lv_partner
          TABLES
            IT_IMP_SELTAB          = lt_attr
            ET_RETURN              = et_return.
    Here you can provide the attribute set in lv_attribute
    and business partner in lv_partner. lt_attr contains all the attributes (name and value).
    Example:
        ls_attr-atname = 'Z_CUST_TEAM_ASSGN'.
        ls_attr-atwrt = 'Test Team'.
        APPEND ls_attr to lt_attr.
    Hope this helps.
    Regards,
    Chandrika

  • Designate multiple languages for a Business Partner

    In the province of Quebec (Canada), contacts for a Business Partner can either be French or English. When creating a Marketing Document, I would like to be able to use the Language setting found under the Logistics Tab to select either a French or English version of a PLD template that is marked as default for that client.
    This means that a BP can be associated to multiple language versions of the same PLD.

    Thanks for your reply.
    I need the have each LOS ( Location of sale or location of delivery) of Business Partner because we will deliver items for the LOS and not for BP.
    As we also need to control (serial numbers) items & services ( field management) I also need to have the LOS as BP.
    As example:
    BP name AAA have 30 LOS.
    BP AAA bought 2000 items.
    BP AAA ask us to old theses items in warehouse.
    BP AAA request to delivery a x quantity in LOS 1, 2,3,4,...
    The invoice went to BP AAA, but the deliveries will be to each LOS of BP AAA.
    As I said we need to have the field services working side-by-side with serials numbers and services for each LOS of our BP AAA.
    So, we have subcustomers from big customer BP AAA.
    Do we have any way of having all subcustomers(LOS) as BP, along with the real customer AAA?
    Thanks in advance,

  • Enter at least one number for the business partner

    Hi Experts,
    SRM 5
    Classic scenario
    R/3 4.6c
    I am trying to execute users_gen transaction for integrating the user with the org. structure. However upon doing so I get an error message "Enter at least one number for the business partner"
    Please provide pointers on the cause for this and how it can be rectified.
    Thanks.
    Regards,
    Amish

    Hi Muthu,
    I am integrating a single user at a time - through users_gen.
    Infact I am getting the same error message while moving the users within the org. structure.
    Steps -
    1. Execute users_gen
    2. Select the user to be integrated
    3. Click execute check mark
    Please provide any pointers.
    Regards,
    Amish

  • How can one see all printdocuments for a business Partner

    How can one see all printdocuments for a business Partner(only transaction, no table please)
    Thx

    Avajit,
    Use T-Code CORRHIST
    Hope this helps
    Rgds
    Rajendra

  • Days Sales Outstanding DSO for a Business Partner

    Hi ,
    Any idea how to use the Method of Least Squares (MLS), to compute Days Sales Outstanding DSO for a Business Partner?  suggestions?

    Hi,
    In  the BP go to Sales Area Data and select sales tab. In that select the sales Org,D.Channel,division for which you want to maintain and enter all the detail in all the tabs (shipping,Sales,Billing etc) and save the BP.
    Regards
    Vinod

  • Are there any bapi for create Business Partner

    Dear Sir,
    Do you know  are there any bapi for create Business Partner in CRM
    Please advise.
    Thank you and best ergards,
    Vimol

    Dear Vimol,
    BAPI_BUPA_CREATE_FROM_DATA     ......SAP BP, BAPI: Create Business Partner
    BAPI_BUPA_FS_CREATE_FROM_DATA  .......SAP BP, BAPI: Create Business Partner
    BAPI_BUPA_FS_CREATE_FROM_DATA2 .......SAP BP, BAPI: Create Business Partner
    Hope this will help.
    Regards,
    Naveen.

  • The visit frequency specified for the business partner

    Hi.
    Anybody knows how I can specificy the visit frequency specified for the business partner ?
    CRM  Mobile  5.0
    Thanks.
    Antonio.

    ok, in transaction FPP3, for a given business partner, you can see the standard address and connection object address.
    Is there any function module which can enable me to change the connection object address.

  • Extract Mobile Phone for CRM Business Partner

    Hi Experts
    I would like to extract the mobile phone number for a business partner from CRM. Transaction BP shows the number in the address tab, communication area together with the telephone number and the fax number.
    The business content DataSource 0BP_DEF_ADDRESS_ATTR delivers only the telephone number and the fax number. Does anyone know of a DataSource that also delivers the mobile phone? Otherwise, in which table is the mobile phone number stored?
    Thanks in advance
    Daniel

    Hi Daniel,
    I'm currently attempting to extend the 0BP_DEF_ADDRESS_ATTR for the same reason, and sending support call to SAP to see if standard extractor can be updated to include mobile number.
    Can you give more detail on how you extended?
    We have appended a field to the extract structure & are now trying to fill it from ADR2 where r3_user = 3
    In particular a copy of any code you added to EXIT_SAPLRSAP_002 would be helpful.
    Cheers
    Don

  • Datasource for ISU business partner line items from DFKKOP & VBRK

    Gurus,
    I am looking for a datasource that will allow me to report on the individual line items from table DFKKOP. Basically credit/debit posting.
    Bill from VBRK
    Pay from DFKKOP
    My research has led me to 0FC_BP_ITEMS which lacks VBRK
    If there is another one please would you share with me.
    thank you
    Vijay

    Why don't you create your own function module, ensuring you get the best possible index use. There is an index for contract account as well as one for business partner (at least here in ECC 6.0).
    You just need to make sure your, or the standard function module's select statement has values for as many of the index fields as possible. If that's not fast enough you need to look at completely different possibilities.
    As I usually say at that point: CPU is cheap...

Maybe you are looking for