Permissions issue causing error when copying digital copy to iTunes.

Hello. I have recently built a new wondiws computer. (I came from a mac, don't ask). I downloaded iTunes, I have put all of my music in there and synced up my phone and some of my digital copies from blu-rays. Suddenly (only a day later) I am unable to import my other digital copies of my movies into iTunes. I am getting an error that says (we will use The Avengers for this example) "An error occurred while copying 'The Avengers' from the DVD to your computer. You do not have enough access privleges for this iperation" Then under that it says "Check the DVD for dirt or damage, reinsert it, then try again."
It might be worth noting that I am running to hard drives. My operating system is on an SSD, and my iTunes files are on my regular hard drive. I don't know if that matters. Now I have tried doing my research and have not been able to fix this problem. I have tried....
1. Right clicking my Itunes folder and making sure it has full access under security
2. I have tried unchecking "Read-only" but it seems to recheckitself when I pull this menu up again to check on it.
3. Turning off User Account Control
4. Right clicking and running as adminstrator when I open iTunes.
5. Reinstalling Itunes
I don't know what else to do. It's so strange because I was able to load all of my music and about 5 digital copies already, then all of a sudden it just stopped. Any help is greatly appreciated!

I was finally able to fix this problem following the steps on this website
http://lallousx86.wordpress.com/2009/06/14/resetting-ntfs-files-security-and-per mission-in-windows-7/
If you scroll down in the comments, you will see where he made a downloadable file. I downloaded that, dropped it into my sotrage hard drive, and then ran it. IT WORKED!! My Blu rays are copying succesfully now!!
If this helps evens one person in the future have a less of a difficult time than I did, I will be happy. Good luck!

Similar Messages

  • FM 10 - Serious Internal Error When Copying/Pasting

    We regularly encounter a serious internal error when copying text from one FM doc to another. We also get the error (occasionally) when we run FrameScript. Does anyone know what could cause this? It appears to happen randomly (i.e. it doesn't appear to be tied to one particular .book or .fm file). We use FM 10, Windows 7, 64-bit OS, and have 4GB of RAM installed. Help please!

    We have version 10.0.2.419. There is nothing out of the ordinary with the content except that it is typically in track text edits. We cannot reproduce the crash on demand. It seems to happen randomly and to some users more than others.

  • System error: Error when copying parameter function group CR01

    Dear friends
    I am getting the above error while doing the Backflushing in REM.
    It occurs when backflushed quantity is issued ,and while confirming the
    ACTUAL ACTIVITES above error occurs..........
    We have upgrade the system from SAP 4.7 to ECC6.0.
    It is giving some error in CRM system but we don't have CRM system.......
    Message displayed is as below..................
    System error: Error when copying parameter function group CR01
         Message no. CR085
    Diagnosis
         Internal error.
    Procedure
         Repeat the transaction.
         If the error occurs and you have a CRM System connected to your ERP
         System, the document may have been archived in the CRM System.
         If the error occurs again, inform your system administrator. If the
         error cannot be corrected, call the SAP Hotline directly. Describe which
         steps preceeded the error.
    Thanks& Regards
    Sandeep
    Message was edited by:
            Sandeep Bhowmick

    Hi Sandeep
    Standard R/3 does not allow backflush without any operation. You need to have an operation to do a backflush.Error message CR 085 is issued because there is no operation in the routing of the material backflushed. System should issue an error when no operations are found in routing. Although, error message CR 085 is not correct, more appropriate message RM 824 for this a program correction is requried check note (691161).
    Regards
    Prasad
    Reward if useful

  • Error when copying update rules!!!

    Hello All,
             I am trying install 0SD_C03 from business content, however I am getting following error. Cube got installed properly.
    Error when copying update rules
    Patch levels are
    SAP_BW  - 0014
    BI_CONT - 0005
    Please help me in solving this error.
    Regards,
      PNK

    Hi,
           The error message show as below. There is no longtext
    Error when copying update rules
    Message no. RSAU457
    But, when I installed FI-AP cubes, update rules are installed without any error. Is there any settings differs from FI to logistics datasources?
    Regards,
    PNK

  • ! Error when copying song from Purchased to IPod play list.  How to fix?

    ! Error when copying song from Purchased to IPod play list. How to fix?

    Hi
    Try the iPod for windows forum http://discussions.apple.com/forum.jspa?forumID=826
    Tony

  • Help! illustrator error! I did a runtime error when copying

    Help! illustrator error! I did a runtime error when copying!
    I 'm using cs5

    Nobody can tell you anything without proper system info or other technical details like the exact error message.
    Mylenium

  • I get an 0x80092013 error when I try to access iTunes Store on my Windows 7 workstation

    I get an 0x80092013 error when I try to access iTunes Store on my Windows 7 workstation

    "You can add the PATH enviromental variable in Control Panel> System> Advanced System Settings.
    Alternatively, I was successful just copying the QTMovieWin.dll from c:\program files (x86)\common files\apple\apple application support\ INTO c:\program files (x86)/iTunes"
    See in: https://discussions.apple.com/thread/5252205?start=15&tstart=0

  • HT204406 hi!!!! I keep getting an "error" when trying to activate my iTunes match. I get to the 1st step, then it gets stopped, and I get the error message. HELP!!!!!!

    hi!!!! I keep getting an "error" when trying to activate my iTunes match. I get to the 1st step, then it gets stopped, and I get the error message. HELP!!!!!!

    That's definitely enough to start.
    It sure seems like it should work...and then I saw that you're using a router. It could very well be that the router is the weak link here.
    Instead connecting to your network router, try using a direct USB connection from your MBP. If that doesn't work, you read this post, which may be relevant to your problem:
    http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/Scanning-from-Mac-10-7-fa ils-after-all-recommendations-Not-ready/td-p/1287003
    It seems you're up to date with software. Post with your results.

  • I get a runtime error when I try to open itunes, any help?

    I get a runtime error when I try to open itunes, any help?

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • I have a system error when trying to open my itunes on my laptop.  Should I unistall and reinstall itunes?

    i have a system error when trying to open my itunes on my laptop.  Should I unistall and reinstall itunes?

    The first error comes when i open my laptop:
    APSDeamon.exe -  System Error
    The program cannot start because MSVCR80.dll is missing from your computer. Try reinstalling....
    when I try to open Itunes, it says:
    iTunes.exe
    iTunes was no installed correclty, please re-install itunes
    Thanks!
    Annabel

  • Receiving Win32 app error when trying to download latest itunes

    I am receiving the following error when I try to update itunes. .....Local Settings\Temporary Internet Files\Content.IES\37LS4QDM\iTunesSetup[1].exe is not a valid Win32 application.
    I saw a previous post from someone with a similar problem. It was suggested that she update Windows XP and that solved the problem. I also have Windows XP and it is completely updated. I also tried emptying the files in the Temp Folder as suggested my another iTunes support page, but couldn't delete everything because two files were running and I couldn't figure out from what program. There were also folders inside the temp folder for iTunes, but I was afraid to delete them.
    Any ideas???

    Local Settings\Temporary Internet Files\Content.IES\37LS4QDM\iTunesSetup[1].exe is not a valid Win32 application.
    hmmmmm.
    are you running the install "online" or are you saving the iTunesSetup.exe to your hard drive and then running the install by doubleclicking the installer file?
    are you connecting to a network (or directly to the internet) wirelessly?

  • I get the following error when trying to use the itunes store "your apple id has been disabled"

    I get the following error when trying to use the itunes store "your apple id has been disabled".  My account was disabled when someone else had been using it without my knowledge.  I changed my apple id password and the apple id is still fine, but itunes has it disabled.  I verified that the computer is authorized for this apple id.  What to do now?

    Welcome to the Apple Community.
    Contact Apple through iTunes Store Support

  • Error when copying files using WebDav web folder

    When copying a large group of files/folder to a 10gAS portal page we are randomly seeing the error: "An error occurred while copying some or all of the selected files" in Windows Explorer. Clicking "ok" will resume the file copy process.
    The only error I see in the Apache log is:
    [Mon Aug  2 18:00:06 2004] [error] OraDAV: Apache/OCI Error -9999/0: ORADAV: LOB was closed with active write operation
    Any suggestions? I couldn't find anything on metalink, though i have logged an iTAR as well.

    My AirPort Extreme card was replaced on my MacBook by Apple. Prior to this, I was getting odd errors like the one outlined above. I do not receive this issue anymore, and I think I can attribute it to the hardware issue with the card.

  • -36 error when copying files

    I'm trying to copy files to an OSX server (v.10.4.11) and often get -36 errors. What does this code mean and how can I solve this issue?
    I tried copying from Windows and other 10.4 computers and it seems to work, but when I copy from OS10.5 clients, I always get this error message.
    Is there a list of error codes I can find somewhere in the support section? I find this rather cryptic for an OS known for its user friendliness.

    Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command). Rebuild it to the Pictures Folder. This might overcome the -36 issue.
    (This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.)
    Failing that you're into recovering your Originals from the damaged Library and creating a new Library and starting over from scratch.
    Regards
    TD

  • How to troubleshoot SQL error when copying cube

    I was successful in creating Info Package and running it to copy data frin cube  1 to cube2.  However, I get an error when
    Running the package. My source cube has 1.9 million rows. However, Info Package only loaded 30,120 records.  Looking in monitor logs, it shows me following error stack:
    System error in program SAPLRS_EXECPTION and from RS_EXEPTION_TO_MESSAGE
    SQL Error 0
    Unknown error in SQL Interface
    Errors in source system
    When I click on long text button for Unknown error in SQL interface:
    The SQL interface of the application server (DBSL) has reported an unknown error. This error can be caused by:
    - Overflows when aggregated data is read from the database in ABAP.  If this occurs, the definition for the corresponding key figure must be changed.
    - Internal errors
    It seems to be some kind of Overflow error. Is there any way to get  more information on the cause
    Of this erroru2026.
    THANKS A LOT.

    I tried SM50, it shows me all processes, but I still cannot figure how to set developer trace. Following is detailed information on what I am doing in copy of cubes and errors I am getting:
    Subject: Troubleshoot Copy of Cubes
    I have tried to copy several cubes on my BI 7.0 and all of them same error, so I am wondering whether I am doing something fundamentally wrong.
                    System error in program SAPLRS_EXECPTION and from RS_EXEPTION_TO_MESSAGE
                    SQL Error 0
                    Unknown error in SQL Interface
                    Errors in source system
    After error occurs I get following message in mail:
              The error occurred in Extractor.
               Refer to the error message.
                     Procedure
                 How you remove the error depends on the error message.
                     Note
              If the source system is a Client Workstation, then it            is possible that the file that you wanted to load was being edited
    at the time of the data request. Make sure that the file is in
    the specified directory, that it is not being processed at the
    I  looked  in SM21, system logs, whenever error occurs, I see the  u201C
    Database selection with invalid cursor &5&5
    The database interface was called by a cursor (in a FETCH or CLOSE cursor operation) that is not flagged as opened. This can occur if a COMMIT or ROLLBACK was executed within a SELECT loop (which closes all opened cursors), followed by another attempt to access the cursor (for example, the next time the loop is executed).
    I DO NOT UNDERSTAND WHEN I AM COPYING FROM CUBE, WHY SAP BW will  generate u201Cinvalid cursoru201D message. Not sure whether it is normal, i.e., not a real error,
    My cube copying  (from cube 1 to cube 2) is a straightforward procedure:
    a.     Select Copy from Cube 1 and create Cube 2.
    b.     Create Export Data Source from Cube 1 Menu.
    c.     From Cube 2 menu, Create Update rules, In update rules select DataSource as 8Cube1.
    d.     Create an Info Package for 8Cube1 under Infosource/DataSource and then run the package.
    Certain no of records e.g.. 3248 or so get loaded and then the error messages are generated, why?
    Really appreciate any help. I tried SM37, does not give any clue. I also Tried SM50, it shows me the process, but I still cannot figure how to generate developer trace.
    Since behavior is same for several cubes I tried, something else also needs to be done, I do not know what???

Maybe you are looking for

  • Apple TV does not display Watch ESPN activation code

    Hi. I am trying to activate Watch ESPN on my Apple TV and the app does not display an Activation Code.  There is a big, blank space where one would logically think an activation code could fit but, unless it is written in black text on a black backgr

  • Create user and assign role in CUA context

    Hi, i'm in CUA context ; in ABAP, when i use the FM BAPI_USER_CREATE1 the new user is well created in all system now i want to assign new roles to this user. Which FM can i use and especially can i assign role to user in a client system ? Thanks for

  • SQL Developer Memory Footprint

    We're looking at replacing around 200 TOAD licenses with SQL Developer. The only technical concern is the memory footprint, as in many cases it would be run from a terminal server with dozens of people logging on. A VM Size of 150MB seems to be not u

  • Textedit quits unexpectedly

    This seemed like the best place to post this question, so please correct me if I'm wrong and I need to move it. I am a writer, and I use textedit for my word processing needs since it is simple and does not have the dreaded autoformatting that word h

  • What is your view of regularly (weekly) running maintenance utilities/programs

    I'm getting mixed messages on whether its necessary to run maintenance utilities/programs as a protective agent or only if something goes wrong. I was told by Micromat that I should run Techtools Pro 6 weekly especially on the volume rebuild and the