Persistently lock function keys!?
Hello,
I would like to persistently lock the function keys at my E531 laptop.
I know you can switch between function keys and multimedia functions by setting FnLock (Fn+ESC), but unfortunately this setting is volatile: everytime I restart the system (even from power saving mode), it is lost and the keys default to multimedia again.
Using this laptop only for "real work", with software that extensively uses the function keys, this is really getting on my nerves...
Is there any way to persistently lock the function keys to generate F1..F12 keycodes?
If I'd ever need the multimedia functions, I'll luckily hold down the Fn key before...
OS is Windows 8.1.
Thanks for any help,
Tilmann
Solved!
Go to Solution.
Tillman,
In addition to the suggestions Mithunr has made, I would ask if you are running the preload?
Could you also check to see that the hotkey drivers are installed, especially if you have done a reload of the system.
I mention this after reading this thread -> http://forums.lenovo.com/t5/ThinkPad-Edge-S-series/ThinkPad-Yoga-FN-keys/td-p/1355211
Thanks!
Best regards,
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Similar Messages
-
Is possible to lock Function key ?
Dears all,
it's possible to lock Fn key ? Since on the new mac keyboards 2 keys must be pressed for function assignements ?
Anyone ?
Thanks.Go to "System Preferences", "Keyboard and Mouse" and click on the Keyboard pane. Then tick the box where it says "Use F1, F2, Etc Keys as Standard function keys".
-
Yoga (Lock) Function Keys- Help!
I just purchased the Yoga and I need to use Excel all the time for work, which requires constant use of the Function keys 1-12. I want to lock my function keys and I have been going crazy trying to figure out how to do it on Windows 8. I spent about 4 hours trying to do it. Can someone please help me?
Shutdown, press NOVO button and select BIOS Setup, switch to 2nd page, disable Hotkey Mode
How to get BIOS version: Windows key + R --> cmd --> wmic bios get smbiosbiosversion -
Apple AL Bluetooth Keyboard - Tab, Caps Lock, Function and Control keys just stopped working
Hi All -
All of a sudden I get on my baby, 27" iMac OSX 10.6 and the some keys on the bluetooth keyboard do not work. Specifially the Tab, Caps Lock, Function and Control keys. I'm fine with the caps lock gone (why is it there?) but the others are useful.
I've searched all over for a solution but I haven't found one. Tried to upgrade the firmware which is fine, reset the PRAM done, checked the speech per apple support nadda.
Please help.
Thanks
-MHi
Go to System preferances > Universal Access > Mouse or Mousie and trackpad > and turn your Mouse keys off.
Then disconnect and reconnect your keyboard.
Note that you don't open your mouse under hardware in System Preferances, this is for a whole different group of settings
Hope This helps -
Satellite L55-B5276 Function Key lock
I would like the function keys to default to F1-F12 rather than the video/playback/audio controls. I have looked around in the Toshiba utilities and have been unable to find something that would switch the default, like with my previous Satellite laptops. How do I accomplish this function?
Satellite L55-B5276
See System Settings on p. 114 of your User's Guide. The Keyboard tab has the setting you're looking for.
-Jerry -
HT1192 caps lock function does not work after latest update
Hi there,
I have a Macbook 13" Early 2011 and recently after updating my operating system to Mac OS X 10.7.4, i have found that the caps lock button isn't functioning.
At present if i hold or press the button, it is failing to light up or function at all.
Is there a fix for this issue, as i have read that there was an update by Apple to stop accidental pressing of this key, however not being able to access its function at all seems to be unusual.
Your thoughts and opinions would be much appreciated,
Thanks,
Robsterhill101My Macbook Pro Early 2011 15" (base model) did this to me last night.
I did a PRAM Reset, the generic "Cure All Procedure" for Macs. It worked after, but I noticed that the button had to be pressed at just the right angle and with enough pressure. The light would come on and off and Caps Lock functions properly. Continued as normal.
I put the computer to sleep by simply closing the lid, and then put myself to sleep as well.
This morning, just before I came on here, my computer would NOT wake from sleep (a whole other issue). Would not wake up by pressing the power button. So I had to do a hard reset, hold the power button down, and press it again after...grrr I never feel good being forced to do this.
Anyways long story a little bit shorter, I restarted my computer and low-and-behold the Cap Lock is not working again. No Bueno, Cupertino.
No, sorry, no liquid damage on the keys, and I don't have kids, nor share my computer with anyone but myself.
Its one of the few things that bug me about this computer. The other is the issue of the computer not being able to wake from sleep. Too often.
SHOULDA BOUGHT THE APPLE CARE
Simply Because, perfect timing after the years original warranty, you will experience problems. After all, they do want you to be a repeat customer. IYKWIM -
X1 Carbon 2014 Function keys not working in windows7
Hello.
I have a brand new X1 carbon(model: 20A7-005KMD) that was installed with our company image, running windows 7.
Alle drivers in device manager has been installed, and system update is updated.
The carbon has the "touch" function keys and they only partly work.
When booting the computer i can swap between the different functions, but when i get into windows, its is "stuck" with only the options F1-F12. The F keys work, but i cant change settings by pressing the FN key on the left side og the touch display, and get sounds/brightness settings etc.
as said, this works just fine during the boot.
Any ideas what can be causing this and even more important - a fix?Hi Guys,
We are currently having the same issue on the X1 Carbon 20A7 models (20A7000LAU). In BIOS or during boot the function changing works without issue (limited to two (2) function screens how-ever), it stops working once you log in. If you then lock the computer you can change the functions, but then once you unlock the device, it stops working.
When the drivers are installed and the device is restart we get the above behaviour, if we uninstall the drivers the function keys will function as expected till the device is restarted. This is very strange behaviour.
On a device received by Lenovo there are 4 function changes/screens in total, we can only make two work temporarily as listed above. We have tried the following.
1. MDT 2013 Delivered Windows 8.1 x64 image image. All drivers/software components installed from the lenovo website. We receive above issue and cannot resolve by uninstall/reinstalling.
2. Vanilla Windows 8.1 ENT x64 image installed from Microsoft Volume Licensing portal, installed all drivers supplied from the Lenovo Website. The same behaviour is seen as above and is reproducable.
3. We have als compared all drivers/software installed on the factory supplied model to a manually built device, still the above behaviour is witnessed.
4. We have manually exported drivers from the X1 Carbon device from lenovo and injected them into the vanilla Windows 8.1 ENT or PRO newly imaged device, still the same behaviour above.
Please let me know what I'm missing, I'm certain this is a bug in the drivers for this model.
Regards,
Nic -
[Solved] Asus Zenbook Prime (UX31A-DB51) Function key issues
I recently purchased this machine, and the final issue I have with is that the Function keys are not working. Looking at the wiki I saw that it should work out of the box with 3.4.4-2, and I'm on 3.4.5-1 and have issues with it. Following the instructions on building a patched module led to kernel panics.
Thanks in advance for any help
EDIT: dmesg output
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.5-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.1 (GCC) ) #1 SMP PREEMPT Mon Jul 16 21:35:54 CEST 2012
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/vols-vroot ro cryptdevice=/dev/sda3:encdev:allow-discards quiet add_efi_memmap elevator=noop
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
[ 0.000000] BIOS-e820: 0000000020200000 - 0000000040004000 (usable)
[ 0.000000] BIOS-e820: 0000000040004000 - 0000000040005000 (reserved)
[ 0.000000] BIOS-e820: 0000000040005000 - 00000000d97e5000 (usable)
[ 0.000000] BIOS-e820: 00000000d97e5000 - 00000000d9de6000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000d9de6000 - 00000000d9de9000 (reserved)
[ 0.000000] BIOS-e820: 00000000d9de9000 - 00000000d9dfe000 (usable)
[ 0.000000] BIOS-e820: 00000000d9dfe000 - 00000000d9e04000 (reserved)
[ 0.000000] BIOS-e820: 00000000d9e04000 - 00000000d9e06000 (usable)
[ 0.000000] BIOS-e820: 00000000d9e06000 - 00000000d9e0b000 (reserved)
[ 0.000000] BIOS-e820: 00000000d9e0b000 - 00000000d9f64000 (usable)
[ 0.000000] BIOS-e820: 00000000d9f64000 - 00000000d9f68000 (reserved)
[ 0.000000] BIOS-e820: 00000000d9f68000 - 00000000d9fa7000 (usable)
[ 0.000000] BIOS-e820: 00000000d9fa7000 - 00000000d9fae000 (reserved)
[ 0.000000] BIOS-e820: 00000000d9fae000 - 00000000d9fb0000 (usable)
[ 0.000000] BIOS-e820: 00000000d9fb0000 - 00000000d9fce000 (reserved)
[ 0.000000] BIOS-e820: 00000000d9fce000 - 00000000d9fd1000 (usable)
[ 0.000000] BIOS-e820: 00000000d9fd1000 - 00000000d9fd3000 (reserved)
[ 0.000000] BIOS-e820: 00000000d9fd3000 - 00000000d9fea000 (usable)
[ 0.000000] BIOS-e820: 00000000d9fea000 - 00000000d9ff0000 (reserved)
[ 0.000000] BIOS-e820: 00000000d9ff0000 - 00000000d9ff8000 (usable)
[ 0.000000] BIOS-e820: 00000000d9ff8000 - 00000000d9ff9000 (reserved)
[ 0.000000] BIOS-e820: 00000000d9ff9000 - 00000000da008000 (usable)
[ 0.000000] BIOS-e820: 00000000da008000 - 00000000da009000 (reserved)
[ 0.000000] BIOS-e820: 00000000da009000 - 00000000da014000 (usable)
[ 0.000000] BIOS-e820: 00000000da014000 - 00000000da019000 (reserved)
[ 0.000000] BIOS-e820: 00000000da019000 - 00000000da037000 (usable)
[ 0.000000] BIOS-e820: 00000000da037000 - 00000000da039000 (reserved)
[ 0.000000] BIOS-e820: 00000000da039000 - 00000000da04d000 (usable)
[ 0.000000] BIOS-e820: 00000000da04d000 - 00000000da04e000 (reserved)
[ 0.000000] BIOS-e820: 00000000da04e000 - 00000000da060000 (usable)
[ 0.000000] BIOS-e820: 00000000da060000 - 00000000da086000 (reserved)
[ 0.000000] BIOS-e820: 00000000da086000 - 00000000da09a000 (usable)
[ 0.000000] BIOS-e820: 00000000da09a000 - 00000000da09b000 (reserved)
[ 0.000000] BIOS-e820: 00000000da09b000 - 00000000da09c000 (usable)
[ 0.000000] BIOS-e820: 00000000da09c000 - 00000000da09e000 (reserved)
[ 0.000000] BIOS-e820: 00000000da09e000 - 00000000da09f000 (usable)
[ 0.000000] BIOS-e820: 00000000da09f000 - 00000000da0a4000 (reserved)
[ 0.000000] BIOS-e820: 00000000da0a4000 - 00000000da0b9000 (usable)
[ 0.000000] BIOS-e820: 00000000da0b9000 - 00000000da65d000 (reserved)
[ 0.000000] BIOS-e820: 00000000da65d000 - 00000000da8dd000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000da8dd000 - 00000000da8e2000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000da8e2000 - 00000000da8e3000 (usable)
[ 0.000000] BIOS-e820: 00000000da8e3000 - 00000000da926000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000da926000 - 00000000dad35000 (usable)
[ 0.000000] BIOS-e820: 00000000dad35000 - 00000000daff4000 (reserved)
[ 0.000000] BIOS-e820: 00000000daff4000 - 00000000db000000 (usable)
[ 0.000000] BIOS-e820: 00000000dbc00000 - 00000000dfe00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000011f200000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0xda8b0000 ACPI 2.0=0xda8b0000 SMBIOS=0xf04c0 MPS=0xfd4b0
[ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
[ 0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x000000000005e000) (0MB)
[ 0.000000] efi: mem02: type=4, attr=0xf, range=[0x000000000005e000-0x0000000000060000) (0MB)
[ 0.000000] efi: mem03: type=3, attr=0xf, range=[0x0000000000060000-0x000000000009f000) (0MB)
[ 0.000000] efi: mem04: type=6, attr=0x800000000000000f, range=[0x000000000009f000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem05: type=2, attr=0xf, range=[0x0000000000100000-0x0000000000fc2000) (14MB)
[ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000000fc2000-0x0000000001000000) (0MB)
[ 0.000000] efi: mem07: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001100000) (1MB)
[ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000001100000-0x0000000002000000) (15MB)
[ 0.000000] efi: mem09: type=2, attr=0xf, range=[0x0000000002000000-0x0000000002ec2000) (14MB)
[ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000002ec2000-0x0000000020000000) (465MB)
[ 0.000000] efi: mem11: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
[ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000020200000-0x0000000037556000) (371MB)
[ 0.000000] efi: mem13: type=2, attr=0xf, range=[0x0000000037556000-0x0000000037aa3000) (5MB)
[ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x0000000037aa3000-0x0000000040004000) (133MB)
[ 0.000000] efi: mem15: type=0, attr=0xf, range=[0x0000000040004000-0x0000000040005000) (0MB)
[ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x0000000040005000-0x000000009accd000) (1452MB)
[ 0.000000] efi: mem17: type=2, attr=0xf, range=[0x000000009accd000-0x00000000ce792000) (826MB)
[ 0.000000] efi: mem18: type=4, attr=0xf, range=[0x00000000ce792000-0x00000000ceac1000) (3MB)
[ 0.000000] efi: mem19: type=7, attr=0xf, range=[0x00000000ceac1000-0x00000000ceac5000) (0MB)
[ 0.000000] efi: mem20: type=4, attr=0xf, range=[0x00000000ceac5000-0x00000000ceace000) (0MB)
[ 0.000000] efi: mem21: type=7, attr=0xf, range=[0x00000000ceace000-0x00000000ceb65000) (0MB)
[ 0.000000] efi: mem22: type=1, attr=0xf, range=[0x00000000ceb65000-0x00000000ceb83000) (0MB)
[ 0.000000] efi: mem23: type=7, attr=0xf, range=[0x00000000ceb83000-0x00000000ceba1000) (0MB)
[ 0.000000] efi: mem24: type=4, attr=0xf, range=[0x00000000ceba1000-0x00000000cebf6000) (0MB)
[ 0.000000] efi: mem25: type=7, attr=0xf, range=[0x00000000cebf6000-0x00000000cebfb000) (0MB)
[ 0.000000] efi: mem26: type=4, attr=0xf, range=[0x00000000cebfb000-0x00000000ced71000) (1MB)
[ 0.000000] efi: mem27: type=7, attr=0xf, range=[0x00000000ced71000-0x00000000ced79000) (0MB)
[ 0.000000] efi: mem28: type=4, attr=0xf, range=[0x00000000ced79000-0x00000000d90f9000) (163MB)
[ 0.000000] efi: mem29: type=7, attr=0xf, range=[0x00000000d90f9000-0x00000000d97b2000) (6MB)
[ 0.000000] efi: mem30: type=2, attr=0xf, range=[0x00000000d97b2000-0x00000000d97bb000) (0MB)
[ 0.000000] efi: mem31: type=3, attr=0xf, range=[0x00000000d97bb000-0x00000000d97e5000) (0MB)
[ 0.000000] efi: mem32: type=10, attr=0xf, range=[0x00000000d97e5000-0x00000000d9de6000) (6MB)
[ 0.000000] efi: mem33: type=5, attr=0x800000000000000f, range=[0x00000000d9de6000-0x00000000d9de9000) (0MB)
[ 0.000000] efi: mem34: type=3, attr=0xf, range=[0x00000000d9de9000-0x00000000d9dfe000) (0MB)
[ 0.000000] efi: mem35: type=5, attr=0x800000000000000f, range=[0x00000000d9dfe000-0x00000000d9e04000) (0MB)
[ 0.000000] efi: mem36: type=3, attr=0xf, range=[0x00000000d9e04000-0x00000000d9e06000) (0MB)
[ 0.000000] efi: mem37: type=5, attr=0x800000000000000f, range=[0x00000000d9e06000-0x00000000d9e0b000) (0MB)
[ 0.000000] efi: mem38: type=3, attr=0xf, range=[0x00000000d9e0b000-0x00000000d9f64000) (1MB)
[ 0.000000] efi: mem39: type=5, attr=0x800000000000000f, range=[0x00000000d9f64000-0x00000000d9f68000) (0MB)
[ 0.000000] efi: mem40: type=3, attr=0xf, range=[0x00000000d9f68000-0x00000000d9fa7000) (0MB)
[ 0.000000] efi: mem41: type=5, attr=0x800000000000000f, range=[0x00000000d9fa7000-0x00000000d9fae000) (0MB)
[ 0.000000] efi: mem42: type=3, attr=0xf, range=[0x00000000d9fae000-0x00000000d9fb0000) (0MB)
[ 0.000000] efi: mem43: type=6, attr=0x800000000000000f, range=[0x00000000d9fb0000-0x00000000d9fbd000) (0MB)
[ 0.000000] efi: mem44: type=5, attr=0x800000000000000f, range=[0x00000000d9fbd000-0x00000000d9fce000) (0MB)
[ 0.000000] efi: mem45: type=3, attr=0xf, range=[0x00000000d9fce000-0x00000000d9fd1000) (0MB)
[ 0.000000] efi: mem46: type=5, attr=0x800000000000000f, range=[0x00000000d9fd1000-0x00000000d9fd3000) (0MB)
[ 0.000000] efi: mem47: type=3, attr=0xf, range=[0x00000000d9fd3000-0x00000000d9fea000) (0MB)
[ 0.000000] efi: mem48: type=5, attr=0x800000000000000f, range=[0x00000000d9fea000-0x00000000d9ff0000) (0MB)
[ 0.000000] efi: mem49: type=3, attr=0xf, range=[0x00000000d9ff0000-0x00000000d9ff8000) (0MB)
[ 0.000000] efi: mem50: type=5, attr=0x800000000000000f, range=[0x00000000d9ff8000-0x00000000d9ff9000) (0MB)
[ 0.000000] efi: mem51: type=3, attr=0xf, range=[0x00000000d9ff9000-0x00000000da008000) (0MB)
[ 0.000000] efi: mem52: type=5, attr=0x800000000000000f, range=[0x00000000da008000-0x00000000da009000) (0MB)
[ 0.000000] efi: mem53: type=3, attr=0xf, range=[0x00000000da009000-0x00000000da014000) (0MB)
[ 0.000000] efi: mem54: type=5, attr=0x800000000000000f, range=[0x00000000da014000-0x00000000da019000) (0MB)
[ 0.000000] efi: mem55: type=3, attr=0xf, range=[0x00000000da019000-0x00000000da037000) (0MB)
[ 0.000000] efi: mem56: type=5, attr=0x800000000000000f, range=[0x00000000da037000-0x00000000da039000) (0MB)
[ 0.000000] efi: mem57: type=3, attr=0xf, range=[0x00000000da039000-0x00000000da04d000) (0MB)
[ 0.000000] efi: mem58: type=5, attr=0x800000000000000f, range=[0x00000000da04d000-0x00000000da04e000) (0MB)
[ 0.000000] efi: mem59: type=3, attr=0xf, range=[0x00000000da04e000-0x00000000da060000) (0MB)
[ 0.000000] efi: mem60: type=5, attr=0x800000000000000f, range=[0x00000000da060000-0x00000000da086000) (0MB)
[ 0.000000] efi: mem61: type=3, attr=0xf, range=[0x00000000da086000-0x00000000da09a000) (0MB)
[ 0.000000] efi: mem62: type=5, attr=0x800000000000000f, range=[0x00000000da09a000-0x00000000da09b000) (0MB)
[ 0.000000] efi: mem63: type=3, attr=0xf, range=[0x00000000da09b000-0x00000000da09c000) (0MB)
[ 0.000000] efi: mem64: type=5, attr=0x800000000000000f, range=[0x00000000da09c000-0x00000000da09e000) (0MB)
[ 0.000000] efi: mem65: type=3, attr=0xf, range=[0x00000000da09e000-0x00000000da09f000) (0MB)
[ 0.000000] efi: mem66: type=5, attr=0x800000000000000f, range=[0x00000000da09f000-0x00000000da0a4000) (0MB)
[ 0.000000] efi: mem67: type=3, attr=0xf, range=[0x00000000da0a4000-0x00000000da0b9000) (0MB)
[ 0.000000] efi: mem68: type=6, attr=0x800000000000000f, range=[0x00000000da0b9000-0x00000000da119000) (0MB)
[ 0.000000] efi: mem69: type=5, attr=0x800000000000000f, range=[0x00000000da119000-0x00000000da133000) (0MB)
[ 0.000000] efi: mem70: type=6, attr=0x800000000000000f, range=[0x00000000da133000-0x00000000da139000) (0MB)
[ 0.000000] efi: mem71: type=6, attr=0x800000000000000f, range=[0x00000000da139000-0x00000000da13e000) (0MB)
[ 0.000000] efi: mem72: type=6, attr=0x800000000000000f, range=[0x00000000da13e000-0x00000000da140000) (0MB)
[ 0.000000] efi: mem73: type=6, attr=0x800000000000000f, range=[0x00000000da140000-0x00000000da15d000) (0MB)
[ 0.000000] efi: mem74: type=0, attr=0xf, range=[0x00000000da15d000-0x00000000da28c000) (1MB)
[ 0.000000] efi: mem75: type=0, attr=0xf, range=[0x00000000da28c000-0x00000000da5f2000) (3MB)
[ 0.000000] efi: mem76: type=0, attr=0xf, range=[0x00000000da5f2000-0x00000000da5f8000) (0MB)
[ 0.000000] efi: mem77: type=0, attr=0xf, range=[0x00000000da5f8000-0x00000000da65d000) (0MB)
[ 0.000000] efi: mem78: type=10, attr=0xf, range=[0x00000000da65d000-0x00000000da72b000) (0MB)
[ 0.000000] efi: mem79: type=10, attr=0xf, range=[0x00000000da72b000-0x00000000da8c7000) (1MB)
[ 0.000000] efi: mem80: type=10, attr=0xf, range=[0x00000000da8c7000-0x00000000da8c9000) (0MB)
[ 0.000000] efi: mem81: type=10, attr=0xf, range=[0x00000000da8c9000-0x00000000da8dd000) (0MB)
[ 0.000000] efi: mem82: type=9, attr=0xf, range=[0x00000000da8dd000-0x00000000da8e1000) (0MB)
[ 0.000000] efi: mem83: type=9, attr=0xf, range=[0x00000000da8e1000-0x00000000da8e2000) (0MB)
[ 0.000000] efi: mem84: type=4, attr=0xf, range=[0x00000000da8e2000-0x00000000da8e3000) (0MB)
[ 0.000000] efi: mem85: type=10, attr=0xf, range=[0x00000000da8e3000-0x00000000da926000) (0MB)
[ 0.000000] efi: mem86: type=4, attr=0xf, range=[0x00000000da926000-0x00000000daa70000) (1MB)
[ 0.000000] efi: mem87: type=3, attr=0xf, range=[0x00000000daa70000-0x00000000dad06000) (2MB)
[ 0.000000] efi: mem88: type=4, attr=0xf, range=[0x00000000dad06000-0x00000000dad0b000) (0MB)
[ 0.000000] efi: mem89: type=3, attr=0xf, range=[0x00000000dad0b000-0x00000000dad0f000) (0MB)
[ 0.000000] efi: mem90: type=4, attr=0xf, range=[0x00000000dad0f000-0x00000000dad1c000) (0MB)
[ 0.000000] efi: mem91: type=3, attr=0xf, range=[0x00000000dad1c000-0x00000000dad2e000) (0MB)
[ 0.000000] efi: mem92: type=4, attr=0xf, range=[0x00000000dad2e000-0x00000000dad35000) (0MB)
[ 0.000000] efi: mem93: type=6, attr=0x800000000000000f, range=[0x00000000dad35000-0x00000000daff4000) (2MB)
[ 0.000000] efi: mem94: type=4, attr=0xf, range=[0x00000000daff4000-0x00000000db000000) (0MB)
[ 0.000000] efi: mem95: type=7, attr=0xf, range=[0x0000000100000000-0x000000011f200000) (498MB)
[ 0.000000] efi: mem96: type=0, attr=0x8000000000000000, range=[0x00000000dbc00000-0x00000000dfe00000) (66MB)
[ 0.000000] efi: mem97: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB)
[ 0.000000] efi: mem98: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem99: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed04000) (0MB)
[ 0.000000] efi: mem100: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem101: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem102: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
[ 0.000000] DMI 2.7 present.
[ 0.000000] DMI: ASUSTeK COMPUTER INC. UX31A/UX31A, BIOS UX31A.204 05/09/2012
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x11f200 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FE0000000 write-back
[ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0DBC00000 mask FFFC00000 uncachable
[ 0.000000] 5 base 11F800000 mask FFF800000 uncachable
[ 0.000000] 6 base 11F400000 mask FFFC00000 uncachable
[ 0.000000] 7 base 11F200000 mask FFFE00000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000dbc00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fd780] fd780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000db000000
[ 0.000000] 0000000000 - 00db000000 page 2M
[ 0.000000] kernel direct mapping tables up to db000000 @ 1fffb000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000011f200000
[ 0.000000] 0100000000 - 011f200000 page 2M
[ 0.000000] kernel direct mapping tables up to 11f200000 @ d97b5000-d97bb000
[ 0.000000] RAMDISK: 37556000 - 37aa3000
[ 0.000000] ACPI: RSDP 00000000da8b0000 00024 (v02 _ASUS_)
[ 0.000000] ACPI: XSDT 00000000da8b0090 0009C (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000da8c2058 000F4 (v04 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 00000000da8b01c0 11E96 (v02 _ASUS_ Notebook 00000013 INTL 20091112)
[ 0.000000] ACPI: FACS 00000000da8daf80 00040
[ 0.000000] ACPI: APIC 00000000da8c2150 00072 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 00000000da8c21c8 00044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: ECDT 00000000da8c2210 000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: MCFG 00000000da8c22d8 0003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000da8c2318 00A3C (v01 DptfTa DptfTab 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000da8c2d58 00CA5 (v01 SADptf SADptf_ 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000da8c3a00 00098 (v01 PchDpt PchDptf 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000da8c3a98 0091C (v01 CfgTDP CfgTDP_ 00001000 INTL 20091112)
[ 0.000000] ACPI: SLIC 00000000da8c43b8 00176 (v01 _ASUS_ Notebook 01072009 ASUS 00000001)
[ 0.000000] ACPI: HPET 00000000da8c4530 00038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 00000000da8c4568 00886 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000da8c4df0 00A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: DMAR 00000000da8c5888 000B8 (v01 INTEL SNB 00000001 INTL 00000001)
[ 0.000000] ACPI: BGRT 00000000da8c5940 00038 (v00 _ASUS_ Notebook 01072009 ASUS 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000011f200000
[ 0.000000] Initmem setup node 0 0000000000000000-000000011f200000
[ 0.000000] NODE_DATA [000000011f1fc000 - 000000011f1fffff]
[ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011a800000-ffff88011e7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0011f200
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00020000
[ 0.000000] 0: 0x00020200 -> 0x00040004
[ 0.000000] 0: 0x00040005 -> 0x000d97e5
[ 0.000000] 0: 0x000d9de9 -> 0x000d9dfe
[ 0.000000] 0: 0x000d9e04 -> 0x000d9e06
[ 0.000000] 0: 0x000d9e0b -> 0x000d9f64
[ 0.000000] 0: 0x000d9f68 -> 0x000d9fa7
[ 0.000000] 0: 0x000d9fae -> 0x000d9fb0
[ 0.000000] 0: 0x000d9fce -> 0x000d9fd1
[ 0.000000] 0: 0x000d9fd3 -> 0x000d9fea
[ 0.000000] 0: 0x000d9ff0 -> 0x000d9ff8
[ 0.000000] 0: 0x000d9ff9 -> 0x000da008
[ 0.000000] 0: 0x000da009 -> 0x000da014
[ 0.000000] 0: 0x000da019 -> 0x000da037
[ 0.000000] 0: 0x000da039 -> 0x000da04d
[ 0.000000] 0: 0x000da04e -> 0x000da060
[ 0.000000] 0: 0x000da086 -> 0x000da09a
[ 0.000000] 0: 0x000da09b -> 0x000da09c
[ 0.000000] 0: 0x000da09e -> 0x000da09f
[ 0.000000] 0: 0x000da0a4 -> 0x000da0b9
[ 0.000000] 0: 0x000da8e2 -> 0x000da8e3
[ 0.000000] 0: 0x000da926 -> 0x000dad35
[ 0.000000] 0: 0x000daff4 -> 0x000db000
[ 0.000000] 0: 0x00100000 -> 0x0011f200
[ 0.000000] On node 0 totalpages: 1019371
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 11 pages reserved
[ 0.000000] DMA zone: 3908 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 871580 pages, LIFO batch:31
[ 0.000000] Normal zone: 1992 pages used for memmap
[ 0.000000] Normal zone: 125496 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040004000 - 0000000040005000
[ 0.000000] PM: Registered nosave memory: 00000000d97e5000 - 00000000d9de6000
[ 0.000000] PM: Registered nosave memory: 00000000d9de6000 - 00000000d9de9000
[ 0.000000] PM: Registered nosave memory: 00000000d9dfe000 - 00000000d9e04000
[ 0.000000] PM: Registered nosave memory: 00000000d9e06000 - 00000000d9e0b000
[ 0.000000] PM: Registered nosave memory: 00000000d9f64000 - 00000000d9f68000
[ 0.000000] PM: Registered nosave memory: 00000000d9fa7000 - 00000000d9fae000
[ 0.000000] PM: Registered nosave memory: 00000000d9fb0000 - 00000000d9fce000
[ 0.000000] PM: Registered nosave memory: 00000000d9fd1000 - 00000000d9fd3000
[ 0.000000] PM: Registered nosave memory: 00000000d9fea000 - 00000000d9ff0000
[ 0.000000] PM: Registered nosave memory: 00000000d9ff8000 - 00000000d9ff9000
[ 0.000000] PM: Registered nosave memory: 00000000da008000 - 00000000da009000
[ 0.000000] PM: Registered nosave memory: 00000000da014000 - 00000000da019000
[ 0.000000] PM: Registered nosave memory: 00000000da037000 - 00000000da039000
[ 0.000000] PM: Registered nosave memory: 00000000da04d000 - 00000000da04e000
[ 0.000000] PM: Registered nosave memory: 00000000da060000 - 00000000da086000
[ 0.000000] PM: Registered nosave memory: 00000000da09a000 - 00000000da09b000
[ 0.000000] PM: Registered nosave memory: 00000000da09c000 - 00000000da09e000
[ 0.000000] PM: Registered nosave memory: 00000000da09f000 - 00000000da0a4000
[ 0.000000] PM: Registered nosave memory: 00000000da0b9000 - 00000000da65d000
[ 0.000000] PM: Registered nosave memory: 00000000da65d000 - 00000000da8dd000
[ 0.000000] PM: Registered nosave memory: 00000000da8dd000 - 00000000da8e2000
[ 0.000000] PM: Registered nosave memory: 00000000da8e3000 - 00000000da926000
[ 0.000000] PM: Registered nosave memory: 00000000dad35000 - 00000000daff4000
[ 0.000000] PM: Registered nosave memory: 00000000db000000 - 00000000dbc00000
[ 0.000000] PM: Registered nosave memory: 00000000dbc00000 - 00000000dfe00000
[ 0.000000] PM: Registered nosave memory: 00000000dfe00000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
[ 0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at dfe00000 (gap: dfe00000:18200000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011ee00000 s82880 r8192 d23616 u524288
[ 0.000000] pcpu-alloc: s82880 r8192 d23616 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1000984
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/vols-vroot ro cryptdevice=/dev/sda3:encdev:allow-discards quiet add_efi_memmap elevator=noop
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3749436k/4704256k available (4538k kernel code, 626772k absent, 328048k reserved, 4308k data, 740k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.003333] Detected 1696.065 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3393.46 BogoMIPS (lpj=5653550)
[ 0.000007] pid_max: default: 32768 minimum: 301
[ 0.000027] init_memory_mapping: 00000000dbc00000-00000000dfe00000
[ 0.000031] 00dbc00000 - 00dfe00000 page 2M
[ 0.151052] Security Framework initialized
[ 0.151060] AppArmor: AppArmor disabled by boot time parameter
[ 0.151411] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.152933] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.153609] Mount-cache hash table entries: 256
[ 0.153820] Initializing cgroup subsys cpuacct
[ 0.153823] Initializing cgroup subsys memory
[ 0.153832] Initializing cgroup subsys devices
[ 0.153834] Initializing cgroup subsys freezer
[ 0.153836] Initializing cgroup subsys net_cls
[ 0.153838] Initializing cgroup subsys blkio
[ 0.153874] CPU: Physical Processor ID: 0
[ 0.153875] CPU: Processor Core ID: 0
[ 0.153882] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.153883] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.154440] mce: CPU supports 7 MCE banks
[ 0.154456] CPU0: Thermal monitoring enabled (TM1)
[ 0.154464] using mwait in idle threads.
[ 0.155854] ACPI: Core revision 20120320
[ 0.172956] ftrace: allocating 17824 entries in 70 pages
[ 0.186631] DMAR: Host address width 36
[ 0.186634] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.186647] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.186650] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.186661] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.186663] DMAR: RMRR base: 0x000000da3af000 end: 0x000000da3cbfff
[ 0.186666] DMAR: RMRR base: 0x000000dbc00000 end: 0x000000dfdfffff
[ 0.186743] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.186745] HPET id 0 under DRHD base 0xfed91000
[ 0.186954] Enabled IRQ remapping in x2apic mode
[ 0.186956] Enabling x2apic
[ 0.186958] Enabled x2apic
[ 0.186967] Switched APIC routing to cluster x2apic.
[ 0.187451] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.220416] CPU0: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz stepping 09
[ 0.324902] Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver.
[ 0.324909] ... version: 3
[ 0.324910] ... bit width: 48
[ 0.324912] ... generic registers: 4
[ 0.324914] ... value mask: 0000ffffffffffff
[ 0.324916] ... max period: 000000007fffffff
[ 0.324917] ... fixed-purpose events: 3
[ 0.324919] ... event mask: 000000070000000f
[ 0.344968] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.364889] Booting Node 0, Processors #1
[ 0.378630] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.391536] #2
[ 0.405332] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.418168] #3 Ok.
[ 0.431901] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.431937] Brought up 4 CPUs
[ 0.431939] Total of 4 processors activated (13573.87 BogoMIPS).
[ 0.436493] devtmpfs: initialized
[ 0.437768] PM: Registering ACPI NVS region [mem 0xd97e5000-0xd9de5fff] (6295552 bytes)
[ 0.437873] PM: Registering ACPI NVS region [mem 0xda65d000-0xda8dcfff] (2621440 bytes)
[ 0.437918] PM: Registering ACPI NVS region [mem 0xda8e3000-0xda925fff] (274432 bytes)
[ 0.438826] NET: Registered protocol family 16
[ 0.438966] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.438969] ACPI: bus type pci registered
[ 0.439040] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.439044] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.488460] PCI: Using configuration type 1 for base access
[ 0.489097] bio: create slab <bio-0> at 0
[ 0.489161] ACPI: Added _OSI(Module Device)
[ 0.489163] ACPI: Added _OSI(Processor Device)
[ 0.489165] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.489168] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.492211] ACPI: EC: EC description table is found, configuring boot EC
[ 0.495384] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.500091] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.500635] ACPI: SSDT 00000000da60a018 00853 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.501405] ACPI: Dynamic OEM Table Load:
[ 0.501409] ACPI: SSDT (null) 00853 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.501770] ACPI: SSDT 00000000da60ba98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.502576] ACPI: Dynamic OEM Table Load:
[ 0.502579] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.502752] ACPI: SSDT 00000000da60cc18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.503510] ACPI: Dynamic OEM Table Load:
[ 0.503513] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.504368] ACPI: Interpreter enabled
[ 0.504373] ACPI: (supports S0 S3 S4 S5)
[ 0.504406] ACPI: Using IOAPIC for interrupt routing
[ 0.512510] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[ 0.512789] ACPI: No dock devices found.
[ 0.512794] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.513213] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.513809] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.513812] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.513815] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.513818] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.513821] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.513823] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.513826] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 0.513829] pci_root PNP0A08:00: host bridge window [mem 0xdfe00000-0xfeafffff]
[ 0.513867] PCI host bridge to bus 0000:00
[ 0.513870] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.513873] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.513875] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.513878] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.513880] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.513883] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.513885] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.513888] pci_bus 0000:00: root bus resource [mem 0xdfe00000-0xfeafffff]
[ 0.513899] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.513952] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.513968] pci 0000:00:02.0: reg 10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 0.513977] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.513985] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
[ 0.514032] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
[ 0.514046] pci 0000:00:04.0: reg 10: [mem 0xfed98000-0xfed9ffff 64bit]
[ 0.514135] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.514163] pci 0000:00:14.0: reg 10: [mem 0xf7d00000-0xf7d0ffff 64bit]
[ 0.514257] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.514289] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.514320] pci 0000:00:16.0: reg 10: [mem 0xf7d22000-0xf7d2200f 64bit]
[ 0.514413] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.514463] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.514489] pci 0000:00:1a.0: reg 10: [mem 0xf7d20000-0xf7d203ff]
[ 0.514599] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.514632] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.514654] pci 0000:00:1b.0: reg 10: [mem 0xf7d18000-0xf7d1bfff 64bit]
[ 0.514739] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.514775] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.514909] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.514948] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.515082] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.515141] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.515168] pci 0000:00:1d.0: reg 10: [mem 0xf7d1f000-0xf7d1f3ff]
[ 0.515282] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.515316] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[ 0.515466] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.515490] pci 0000:00:1f.2: reg 10: [io 0xf0b0-0xf0b7]
[ 0.515500] pci 0000:00:1f.2: reg 14: [io 0xf0a0-0xf0a3]
[ 0.515512] pci 0000:00:1f.2: reg 18: [io 0xf090-0xf097]
[ 0.515522] pci 0000:00:1f.2: reg 1c: [io 0xf080-0xf083]
[ 0.515532] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f]
[ 0.515542] pci 0000:00:1f.2: reg 24: [mem 0xf7d1e000-0xf7d1e7ff]
[ 0.515605] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.515629] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.515651] pci 0000:00:1f.3: reg 10: [mem 0xf7d1d000-0xf7d1d0ff 64bit]
[ 0.515682] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
[ 0.515732] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
[ 0.515758] pci 0000:00:1f.6: reg 10: [mem 0xf7d1c000-0xf7d1cfff 64bit]
[ 0.515922] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.516173] pci 0000:02:00.0: [8086:088e] type 00 class 0x028000
[ 0.516366] pci 0000:02:00.0: reg 10: [mem 0xf7c00000-0xf7c01fff 64bit]
[ 0.517198] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.521918] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.521928] pci 0000:00:1c.1: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.521957] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.522122] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.522161] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.522339] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.522604] pci0000:00: ACPI _OSC control (0x18) granted
[ 0.528361] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
[ 0.528420] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 12)
[ 0.528480] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 12)
[ 0.528531] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 12)
[ 0.528584] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.528635] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.528687] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 12)
[ 0.528737] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 12)
[ 0.528831] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.528838] vgaarb: loaded
[ 0.528839] vgaarb: bridge control possible 0000:00:02.0
[ 0.528883] PCI: Using ACPI for IRQ routing
[ 0.530787] PCI: pci_cache_line_size set to 64 bytes
[ 0.530797] pci 0000:00:04.0: no compatible bridge window for [mem 0xfed98000-0xfed9ffff 64bit]
[ 0.530873] reserve RAM buffer: 000000000009f000 - 000000000009ffff
[ 0.530876] reserve RAM buffer: 0000000040004000 - 0000000043ffffff
[ 0.530879] reserve RAM buffer: 00000000d97e5000 - 00000000dbffffff
[ 0.530891] reserve RAM buffer: 00000000d9dfe000 - 00000000dbffffff
[ 0.530903] reserve RAM buffer: 00000000d9e06000 - 00000000dbffffff
[ 0.530914] reserve RAM buffer: 00000000d9f64000 - 00000000dbffffff
[ 0.530925] reserve RAM buffer: 00000000d9fa7000 - 00000000dbffffff
[ 0.530936] reserve RAM buffer: 00000000d9fb0000 - 00000000dbffffff
[ 0.530946] reserve RAM buffer: 00000000d9fd1000 - 00000000dbffffff
[ 0.530956] reserve RAM buffer: 00000000d9fea000 - 00000000dbffffff
[ 0.530966] reserve RAM buffer: 00000000d9ff8000 - 00000000dbffffff
[ 0.530975] reserve RAM buffer: 00000000da008000 - 00000000dbffffff
[ 0.530984] reserve RAM buffer: 00000000da014000 - 00000000dbffffff
[ 0.530993] reserve RAM buffer: 00000000da037000 - 00000000dbffffff
[ 0.531001] reserve RAM buffer: 00000000da04d000 - 00000000dbffffff
[ 0.531008] reserve RAM buffer: 00000000da060000 - 00000000dbffffff
[ 0.531015] reserve RAM buffer: 00000000da09a000 - 00000000dbffffff
[ 0.531022] reserve RAM buffer: 00000000da09c000 - 00000000dbffffff
[ 0.531028] reserve RAM buffer: 00000000da09f000 - 00000000dbffffff
[ 0.531033] reserve RAM buffer: 00000000da0b9000 - 00000000dbffffff
[ 0.531038] reserve RAM buffer: 00000000da8e3000 - 00000000dbffffff
[ 0.531042] reserve RAM buffer: 00000000dad35000 - 00000000dbffffff
[ 0.531045] reserve RAM buffer: 00000000db000000 - 00000000dbffffff
[ 0.531048] reserve RAM buffer: 000000011f200000 - 000000011fffffff
[ 0.531151] NetLabel: Initializing
[ 0.531153] NetLabel: domain hash size = 128
[ 0.531155] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.531169] NetLabel: unlabeled traffic allowed by default
[ 0.531194] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.531202] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.533219] Switching to clocksource hpet
[ 0.539356] pnp: PnP ACPI init
[ 0.539371] ACPI: bus type pnp registered
[ 0.539727] pnp 00:00: [bus 00-3e]
[ 0.539735] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.539737] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.539739] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.539742] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.539744] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.539747] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.539749] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.539751] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.539754] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.539756] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.539759] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.539761] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.539763] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.539766] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.539768] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.539770] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.539773] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.539775] pnp 00:00: [mem 0xdfe00000-0xfeafffff window]
[ 0.539777] pnp 00:00: [mem 0x00010000-0x0001ffff window]
[ 0.539852] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.539883] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[ 0.539934] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.539938] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.540008] pnp 00:02: [io 0x0000-0x001f]
[ 0.540010] pnp 00:02: [io 0x0081-0x0091]
[ 0.540012] pnp 00:02: [io 0x0093-0x009f]
[ 0.540014] pnp 00:02: [io 0x00c0-0x00df]
[ 0.540016] pnp 00:02: [dma 4]
[ 0.540049] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.540058] pnp 00:03: [mem 0xff000000-0xffffffff]
[ 0.540087] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.540186] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.540219] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.540233] pnp 00:05: [io 0x002e-0x002f]
[ 0.540235] pnp 00:05: [io 0x004e-0x004f]
[ 0.540237] pnp 00:05: [io 0x0061]
[ 0.540239] pnp 00:05: [io 0x0063]
[ 0.540241] pnp 00:05: [io 0x0065]
[ 0.540243] pnp 00:05: [io 0x0067]
[ 0.540245] pnp 00:05: [io 0x0070]
[ 0.540246] pnp 00:05: [io 0x0080]
[ 0.540248] pnp 00:05: [io 0x0092]
[ 0.540250] pnp 00:05: [io 0x00b2-0x00b3]
[ 0.540252] pnp 00:05: [io 0x0680-0x069f]
[ 0.540254] pnp 00:05: [io 0x0200-0x020f]
[ 0.540256] pnp 00:05: [io 0xffff]
[ 0.540258] pnp 00:05: [io 0xffff]
[ 0.540260] pnp 00:05: [io 0x0400-0x0453]
[ 0.540264] pnp 00:05: [io 0x0458-0x047f]
[ 0.540266] pnp 00:05: [io 0x0500-0x057f]
[ 0.540268] pnp 00:05: [io 0x164e-0x164f]
[ 0.540315] system 00:05: [io 0x0680-0x069f] has been reserved
[ 0.540318] system 00:05: [io 0x0200-0x020f] has been reserved
[ 0.540320] system 00:05: [io 0xffff] has been reserved
[ 0.540323] system 00:05: [io 0xffff] has been reserved
[ 0.540326] system 00:05: [io 0x0400-0x0453] has been reserved
[ 0.540328] system 00:05: [io 0x0458-0x047f] has been reserved
[ 0.540331] system 00:05: [io 0x0500-0x057f] has been reserved
[ 0.540334] system 00:05: [io 0x164e-0x164f] has been reserved
[ 0.540338] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.540348] pnp 00:06: [io 0x0070-0x0077]
[ 0.540362] pnp 00:06: [irq 8]
[ 0.540395] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.540427] pnp 00:07: [io 0x0454-0x0457]
[ 0.540471] system 00:07: [io 0x0454-0x0457] has been reserved
[ 0.540474] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.540502] pnp 00:08: [io 0x0010-0x001f]
[ 0.540504] pnp 00:08: [io 0x0022-0x003f]
[ 0.540506] pnp 00:08: [io 0x0044-0x005f]
[ 0.540508] pnp 00:08: [io 0x0072-0x007f]
[ 0.540510] pnp 00:08: [io 0x0080]
[ 0.540512] pnp 00:08: [io 0x0084-0x0086]
[ 0.540514] pnp 00:08: [io 0x0088]
[ 0.540516] pnp 00:08: [io 0x008c-0x008e]
[ 0.540518] pnp 00:08: [io 0x0090-0x009f]
[ 0.540520] pnp 00:08: [io 0x00a2-0x00bf]
[ 0.540522] pnp 00:08: [io 0x00e0-0x00ef]
[ 0.540524] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.540571] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.540575] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.540584] pnp 00:09: [io 0x00f0-0x00ff]
[ 0.540593] pnp 00:09: [irq 13]
[ 0.540627] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.540680] pnp 00:0a: [irq 12]
[ 0.540716] pnp 00:0a: Plug and Play ACPI device, IDs ETD0105 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[ 0.540743] pnp 00:0b: [io 0x0060]
[ 0.540745] pnp 00:0b: [io 0x0064]
[ 0.540752] pnp 00:0b: [irq 1]
[ 0.540788] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.541018] pnp 00:0c: [mem 0xfed1c000-0xfed1ffff]
[ 0.541020] pnp 00:0c: [mem 0xfed10000-0xfed17fff]
[ 0.541022] pnp 00:0c: [mem 0xfed18000-0xfed18fff]
[ 0.541024] pnp 00:0c: [mem 0xfed19000-0xfed19fff]
[ 0.541027] pnp 00:0c: [mem 0xf8000000-0xfbffffff]
[ 0.541029] pnp 00:0c: [mem 0xfed20000-0xfed3ffff]
[ 0.541031] pnp 00:0c: [mem 0xfed90000-0xfed93fff]
[ 0.541033] pnp 00:0c: [mem 0xfed45000-0xfed8ffff]
[ 0.541035] pnp 00:0c: [mem 0xff000000-0xffffffff]
[ 0.541038] pnp 00:0c: [mem 0xfee00000-0xfeefffff]
[ 0.541040] pnp 00:0c: [mem 0xdfe00000-0xdfe00fff]
[ 0.541103] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.541106] system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.541109] system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.541112] system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.541116] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.541119] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.541122] system 00:0c: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.541125] system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.541128] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
[ 0.541131] system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.541134] system 00:0c: [mem 0xdfe00000-0xdfe00fff] has been reserved
[ 0.541138] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.541211] pnp 00:0d: [mem 0xdfe00000-0xdfe00fff]
[ 0.541274] system 00:0d: [mem 0xdfe00000-0xdfe00fff] has been reserved
[ 0.541278] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.541430] pnp 00:0e: [mem 0x20000000-0x201fffff]
[ 0.541433] pnp 00:0e: [mem 0x40004000-0x40004fff]
[ 0.541495] system 00:0e: [mem 0x20000000-0x201fffff] has been reserved
[ 0.541497] system 00:0e: [mem 0x40004000-0x40004fff] has been reserved
[ 0.541501] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.541534] pnp: PnP ACPI: found 15 devices
[ 0.541536] ACPI: ACPI bus type pnp unregistered
[ 0.548333] pci 0000:00:04.0: BAR 0: assigned [mem 0xdfe08000-0xdfe0ffff 64bit]
[ 0.548340] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.548357] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.548364] pci 0000:00:1c.1: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.548408] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.548411] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.548413] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.548416] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.548418] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.548421] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.548424] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.548426] pci_bus 0000:00: resource 11 [mem 0xdfe00000-0xfeafffff]
[ 0.548429] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.548474] NET: Registered protocol family 2
[ 0.548608] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.549403] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.550900] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.551049] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.551052] TCP: reno registered
[ 0.551067] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.551086] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.551175] NET: Registered protocol family 1
[ 0.551191] pci 0000:00:02.0: Boot video device
[ 0.586597] PCI: CLS 64 bytes, default 64
[ 0.586642] Unpacking initramfs...
[ 0.718182] Freeing initrd memory: 5428k freed
[ 0.718943] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.718947] Placing 64MB software IO TLB between ffff8800ca792000 - ffff8800ce792000
[ 0.718950] software IO TLB at phys 0xca792000 - 0xce792000
[ 0.719520] audit: initializing netlink socket (disabled)
[ 0.719531] type=2000 audit(1342675392.609:1): initialized
[ 0.719886] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.721809] VFS: Disk quotas dquot_6.5.2
[ 0.721861] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.721987] msgmni has been set to 7684
[ 0.722183] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.722218] io scheduler noop registered (default)
[ 0.722221] io scheduler deadline registered
[ 0.722279] io scheduler cfq registered
[ 0.722575] efifb: probing for efifb
[ 0.725055] efifb: framebuffer at 0xe0000000, mapped to 0xffffc9000a200000, using 3072k, total 3072k
[ 0.725058] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.725060] efifb: scrolling: redraw
[ 0.725063] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.727405] Console: switching to colour frame buffer device 128x48
[ 0.729621] fb0: EFI VGA frame buffer device
[ 0.729628] intel_idle: does not run on family 6 model 58
[ 0.729660] GHES: HEST is not enabled!
[ 0.729740] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.730316] Linux agpgart interface v0.103
[ 0.730401] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.732007] i8042: Detected active multiplexing controller, rev 1.1
[ 0.732785] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.732815] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.732839] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.732863] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.732884] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.732989] mousedev: PS/2 mouse device common for all mice
[ 0.733073] rtc_cmos 00:06: RTC can wake from S4
[ 0.733238] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.733268] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.733278] cpuidle: using governor ladder
[ 0.733280] cpuidle: using governor menu
[ 0.733411] TCP: cubic registered
[ 0.733520] NET: Registered protocol family 10
[ 0.733728] NET: Registered protocol family 17
[ 0.733733] Registering the dns_resolver key type
[ 0.733877] PM: Hibernation image not present or could not be loaded.
[ 0.733883] registered taskstats version 1
[ 0.734299] rtc_cmos 00:06: setting system clock to 2012-07-19 05:23:13 UTC (1342675393)
[ 0.734449] Initializing network drop monitor service
[ 0.736068] Freeing unused kernel memory: 740k freed
[ 0.736186] Write protecting the kernel read-only data: 8192k
[ 0.741922] Freeing unused kernel memory: 1588k freed
[ 0.744508] Freeing unused kernel memory: 640k freed
[ 0.752904] systemd-udevd[48]: starting version 186
[ 0.755540] SCSI subsystem initialized
[ 0.757022] libata version 3.00 loaded.
[ 0.757753] ahci 0000:00:1f.2: version 3.0
[ 0.757857] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[ 0.757916] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
[ 0.757920] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 0.757927] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.760754] scsi0 : ahci
[ 0.760973] scsi1 : ahci
[ 0.761219] scsi2 : ahci
[ 0.761696] scsi3 : ahci
[ 0.761814] scsi4 : ahci
[ 0.762047] scsi5 : ahci
[ 0.762660] ata1: SATA max UDMA/133 abar m2048@0xf7d1e000 port 0xf7d1e100 irq 42
[ 0.762664] ata2: DUMMY
[ 0.762665] ata3: DUMMY
[ 0.762667] ata4: DUMMY
[ 0.762668] ata5: DUMMY
[ 0.762670] ata6: DUMMY
[ 0.766691] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.079319] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.090674] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.090818] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.090822] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.101189] ata1.00: ATA-8: ADATA XM11 128GB, 5.0.1, max UDMA/133
[ 1.101208] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.110592] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.110759] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.110763] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.121163] ata1.00: configured for UDMA/133
[ 1.121291] scsi 0:0:0:0: Direct-Access ATA ADATA XM11 128GB 5.0. PQ: 0 ANSI: 5
[ 1.123017] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 1.123090] sd 0:0:0:0: [sda] Write Protect is off
[ 1.123095] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.123119] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.123778] usbcore: registered new interface driver usbfs
[ 1.123805] usbcore: registered new interface driver hub
[ 1.123854] usbcore: registered new device driver usb
[ 1.124316] sda: sda1 sda2 sda3
[ 1.124612] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.125369] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 1.125376] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.125423] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.125529] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.125550] xhci_hcd 0000:00:14.0: irq 16, io mem 0xf7d00000
[ 1.125619] xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X
[ 1.125765] xHCI xhci_add_endpoint called for root hub
[ 1.125769] xHCI xhci_check_bandwidth called for root hub
[ 1.125819] hub 1-0:1.0: USB hub found
[ 1.125832] hub 1-0:1.0: 4 ports detected
[ 1.126030] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.126038] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.126165] xHCI xhci_add_endpoint called for root hub
[ 1.126169] xHCI xhci_check_bandwidth called for root hub
[ 1.126239] hub 2-0:1.0: USB hub found
[ 1.126251] hub 2-0:1.0: 4 ports detected
[ 1.129851] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.129926] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.129933] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.129954] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.129988] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.133867] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 1.133883] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7d20000
[ 1.142574] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.142727] hub 3-0:1.0: USB hub found
[ 1.142731] hub 3-0:1.0: 2 ports detected
[ 1.142859] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.142866] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.142879] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 1.142914] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.146795] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.146814] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7d1f000
[ 1.155902] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.156064] hub 4-0:1.0: USB hub found
[ 1.156069] hub 4-0:1.0: 2 ports detected
[ 1.161829] agpgart-intel 0000:00:00.0: Intel Ivybridge Chipset
[ 1.162274] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.164964] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 1.165093] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 1.167496] [drm] Initialized drm 1.1.0 20060810
[ 1.168381] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 1.179358] ACPI: Lid Switch [LID]
[ 1.179416] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 1.179422] ACPI: Power Button [PWRB]
[ 1.179469] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 1.179474] ACPI: Sleep Button [SLPB]
[ 1.183098] i915 0000:00:02.0: setting latency timer to 64
[ 1.398826] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[ 1.398830] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 1.399105] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 1.399167] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.399169] [drm] Driver supports precise vblank timestamp query.
[ 1.399738] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.482168] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[ 1.499154] usb 1-2: ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes
[ 1.499163] usb 1-2: ep 0x2 - rounding interval to 32768 microframes, ep desc says 0 microframes
[ 1.605348] usb 3-1: new high-speed USB device number 2 using ehci_hcd
[ 1.718541] Refined TSC clocksource calibration: 1696.146 MHz.
[ 1.718545] Switching to clocksource tsc
[ 1.729014] hub 3-1:1.0: USB hub found
[ 1.729085] hub 3-1:1.0: 6 ports detected
[ 1.835066] usb 4-1: new high-speed USB device number 2 using ehci_hcd
[ 1.958735] hub 4-1:1.0: USB hub found
[ 1.958810] hub 4-1:1.0: 6 ports detected
[ 2.025002] usb 3-1.2: new high-speed USB device number 3 using ehci_hcd
[ 2.224762] usb 4-1.5: new high-speed USB device number 3 using ehci_hcd
[ 2.474462] usb 4-1.6: new full-speed USB device number 4 using ehci_hcd
[ 2.667462] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 3.173881] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[ 3.173885] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
[ 3.173902] Console: switching to colour dummy device 80x25
[ 3.175315] fbcon: inteldrmfb (fb0) is primary device
[ 4.162812] Console: switching to colour frame buffer device 240x67
[ 4.168648] fb0: inteldrmfb frame buffer device
[ 4.168650] drm: registered panic notifier
[ 4.170494] ACPI Warning: _BQC returned an invalid level (20120320/video-472)
[ 4.170803] acpi device:35: registered as cooling_device0
[ 4.171244] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 4.171252] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 4.171274] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 4.261463] device-mapper: uevent: version 1.0.3
[ 4.261618] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
[ 7.530172] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 7.671884] systemd-udevd[206]: starting version 186
[ 7.701027] ACPI: Requesting acpi_cpufreq
[ 7.708519] Monitor-Mwait will be used to enter C-1 state
[ 7.708550] Monitor-Mwait will be used to enter C-2 state
[ 7.708563] ACPI: acpi_idle registered with cpuidle
[ 7.765552] ACPI: AC Adapter [AC0] (on-line)
[ 7.792019] ACPI: Battery Slot [BAT0] (battery present)
[ 7.842020] wmi: Mapper loaded
[ 7.849215] thermal LNXTHERM:00: registered as thermal_zone0
[ 7.849223] ACPI: Thermal Zone [THRM] (54 C)
[ 7.856172] mei: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.856873] mei 0000:00:16.0: setting latency timer to 64
[ 7.857061] mei 0000:00:16.0: irq 45 for MSI/MSI-X
[ 7.867562] iTCO_vendor_support: vendor-support=0
[ 7.870231] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 7.870413] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 7.878227] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 7.880017] cfg80211: Calling CRDA to update world regulatory domain
[ 7.887026] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \SMB0 1 (20120320/utaddress-251)
[ 7.887035] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 2 (20120320/utaddress-251)
[ 7.887041] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.890845] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 7.895102] usbcore: registered new interface driver uas
[ 7.897297] Initializing USB Mass Storage driver...
[ 7.897383] scsi6 : usb-storage 1-2:1.0
[ 7.897494] usbcore: registered new interface driver usb-storage
[ 7.897496] USB Mass Storage support registered.
[ 7.905414] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 7.908378] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 7.908380] Copyright(c) 2003-2012 Intel Corporation
[ 7.908463] iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000
[ 7.908465] iwlwifi 0000:02:00.0: pci_resource_base = ffffc900040c8000
[ 7.908467] iwlwifi 0000:02:00.0: HW Revision ID = 0x24
[ 7.908564] iwlwifi 0000:02:00.0: irq 47 for MSI/MSI-X
[ 7.909834] Linux media interface: v0.10
[ 7.912145] Linux video capture interface: v2.00
[ 7.912309] rts5139: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.916365] scsi7 : SCSI emulation for RTS5139 USB card reader
[ 7.924679] scsi 7:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
[ 7.926600] uvcvideo: Found UVC 1.00 device USB2.0 HD UVC WebCam (04f2:b330)
[ 7.927768] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[ 7.927991] Bluetooth: Core ver 2.16
[ 7.928007] NET: Registered protocol family 31
[ 7.928009] Bluetooth: HCI device and connection manager initialized
[ 7.928012] Bluetooth: HCI socket layer initialized
[ 7.928014] Bluetooth: L2CAP socket layer initialized
[ 7.928025] Bluetooth: SCO socket layer initialized
[ 7.929593] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x12
[ 7.930401] usbcore: registered new interface driver rts5139
[ 7.932134] usbcore: registered new interface driver btusb
[ 7.938575] input: USB2.0 HD UVC WebCam as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.0/input/input6
[ 7.939734] usbcore: registered new interface driver uvcvideo
[ 7.939737] USB Video Class driver (1.1.1)
[ 7.959022] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 7.960155] asus_wmi: ASUS WMI generic driver loaded
[ 7.961792] asus_wmi: Initialization: 0x1
[ 7.961840] asus_wmi: BIOS WMI version: 7.9
[ 7.962148] asus_wmi: SFUN value: 0x4a2877
[ 7.963015] asus_wmi: Can't find DSTS
[ 7.968179] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1
[ 7.968413] iwlwifi 0000:02:Hi, I bought the UX32VD a few weeks ago. Most of the steps, mentioned in the article about the UX31A apply to the UX32VD too. I don't know what your problems are. All the steps are explained.
[ 8.039202] asus_wmi: Can't find DSTS
Just patch the kernel with the mentioned fix, or use the dkms variant. This will fix the can't find DSTS issue. After that, the asus-nb-wmi (or sth. like that) module will be loaded successfully, which makes most of the function keys work (except the screen brightness keys). The only thing remaining is to use the supplied hackarounds to be able to change the screenbrightness.
After these steps, I created a .Xmodmap to remap the automatic kbd. backlight key and the touchpad disable key to XF86MonBrightnessDown (or so .. can't remember the exact name) and XF86MonBrightnessUp and respectively mapped the shortcuts with xfce4-keyboard-settings (XF86MonBrightnessDown to the command backlight down, XF86MonBrightnessUp to backlight up). Unfortunately, sometimes this is a little bit buggy. The scan codes change randomly on some reboots, eg: one time it gets recognized as XF86MonBrightnessUp, and a few keypresses later as something different.
Hope they fix this issue with the 3.5 kernel, and eventually get the actual screenbrightness buttons to work. -
My Edge E335 came with Win 7 but I later added Win 8.1 in dual boot. Win 8.1, free of all the Lenovo software, is better in use for me except that the function keys all have the Lenovo laptop functions for camera, screen brightness and so on rather than the default Microsoft functions with no option to switch with the Fn key. Is there a BIOS update available for 8.1, or any other way to have both sets of functions available?
Hello.
To keep your F1-F12 keys locked, just press FN+ESC once. When you wish them to return to the default media mode, then just press FN+ESC again.
Cheers!
ThinkPad W540 (20BG) - i7-4800MQ/24GB // ThinkPad T440s (20AQ) - i7-4600U/12GB
ThinkPad T440p (20AW) - i7-4800MQ/16GB // ThinkPad Helix (3698-6EU) - i5-3337U/4GB
ThinkPad W520 (4282-W4Q) - i7-2720QM/32GB // ThinkPad T400 (2767-W1C) - P9500/8GB
ThinkPad T61 (7665-CTO) - T7700/4GB // ThinkPad T60p (8741-C2G) - T7400/4GB -
Need help getting my i810 working: Function keys, brightness, ext. VGA
Hello everyone,
I am going to do a presentation in a few days, so this has become a bit urgent...
On my i810-based Samsung Q10, the function keys for changing display brightness and switching to an external monitor do not work properly. Altering the brightness causes the mouse pointer to disappear, switching to the external VGA port does not work at all.
Before my switch to Arch, this has never been an issue for me; they worked in every OS and graphics mode I had on the machine. Hence, I assume that Arch's X configuration somehow tries to capture those key events and pass them on to the driver, instead of to the video BIOS. However, I don't know where this might happen...
Searching the forums did not give me any working solution so far.
My driver is configured as follows:
Section "Device"
Identifier "Onboardchip"
# Driver "intel"
Driver "i810"
VendorName "Intel"
BoardName "i810 onboard"
Option "HWCursor" "off"
Option "AccelMethod" "exa" # neu, skaliert im Betrieb hoch
Option "MigrationHeuristic" "greedy" # macht 2D flotter
EndSection
The intel and i810 drivers both show the same behaviour.
Does anyone have any ideas? I would not like to have to do my presentation in Windows, especially now that KDEMod has this beautiful new design ;-)
Many thanks in advance
JürgenThe first thing i would check is in the Keyboard and mouse prefs pane to see if you selected to use the function keys for software features. If so, you need to use the fn key(bottom left of keyboard0 with the function keys to use those hardware functions. Then check to see that the num lock key isn't on, which usually affects the keyboard.
If it's neither one of those, it is probably hardware. Could be a loose wire if you lifted up keyboard at all. -
I have owned three Palms and now on my 4th.
The very first one,second one and third was able to be integrated with the software/programming to be installed into my phone for the ability to open realtor lock boxes. ALL Palms have infrared so once installed at my local board of realtors I am good to go and I simply access the program on my Palm point the phone at the lock box and it opens... among other functions but this is the one most used.
Now I have just purchased a new Palm Pre and ONCE AGAIN I am told by GE Security that the NEW Palm will not function as a lockbox because of it's operating system. IS THIS TRUE ARE ARE THEY TELLING ME THE SAME THING THEY HAVE DONE IN THE PAST BECAUSE OF EITHER SOMETHING BETWEEN THE TWO COMPANIES IS LACKING IN GETTING THE PRODUCT READY OR IS IT TRUE THIS NEW PRE WILL NEVER BE COMPATIBLE FOR LOCK BOX KEY USAGE?
Need help... don't think this is a question for tech support in India!Currently, realtors can use Blackberries to access supra lockboxes by using bluetooth technology and a fob which converts the bluetooth signal to an infrared signal. Will we soon have this capability with Palm Pre? I want to upgrade from my Palm Centro to the Palm Pre Plus, but may have to go with a Blackberry instead. Any information you can provide will be greatly appreciated!
This post desribes the situation well: https://developer.palm.com/distribution/viewtopic.php?f=11&t=364&view=previous
Consider this another request to enable the Pre for compatibility with the GE Supra eKey. For years Realtors have utilized the Treos as their Smartphone of choice due to its ability to unlock the lockboxes that hold the keys to the homes we show. Currently no such application is available for the Pre because the SDK stifles access to the Bluetooth interface that is needed to communicate with the lockboxes. Here is what the eKey people say regarding the issue:
"Unfortunately at this time support for the Palm Pre is not possible. The Palm Pre is the first device to use Palm's new "WebOS", and the Software Development Kit (or SDK) available at this time does not include adequate access to the Bluetooth interface on the phone. Because of this, and because the Palm Pre does not have an infrared port on it, we will not be able to certify it as an eKEY device. Hopefully in a future version of the SDK, the required Bluetooth Access will be made available to our programmers so that we can support this device."
Just about every Realtor I know uses a Palm phone, but now people who want to update and upgrade their phones are jumping ship to Blackberry due to this single issue. I'm sure that I don't have to remind you that Brand Loyalty is incredibly hard to earn, and everyday that the Pre does not have this function you will lose valuable customers and an entire niche of users.
I know that I am not the first to make this plea, but of all the research I have done, I have yet to find a response or even an acknowledgment from Palm. Please advise. -
HP Pavilion tx2500z - Default Function Keys not working
I have a HP Pavilion tx2500z (model: KD436AV) laptop with Windows 7 64 bit OS installed. Since last few months, I am not able to use default function keys (F1, F2...F12) and other keys at the top row of the keyboard, including Pg Up, Pg Down, Home, End, Insert, Delete. However, all the Action Keys available on these keys are working without pressing Fn Key (e.g. Sleep, Brightness, num lock etc). I get same Action Key behaviour even after pressing Fn Key.
It looks like, somehow system is locked in action key mode and I am not able to come out of it. I tried to upgrade Bios (currently on latest F.0F version) and also tried to disable the Action Key mode in BIOS, but Action Key mode is not available in BIOS of this computer. Even to enter BIOS, I faced problem because F10 key was not working to enter BIOS setup. I had to connect external keyboard to enter BIOS.
I am disperately looking for help to come out of this situation. Any help will be greatly appreciated.
Thanks in advance.Hello,
An idea for you would be to test the keyboard in a different enviroment ro see if it's hardware or not.
We can check the keys by booting into the recovery partition and opening a command prompt.
Power down notebook
Press power button then tap F11 until the screen says recovery at the bottom left or says Windows is Loading files. If it shows a different menu on your screen you may have press it too late or continues to load Windows you may have an issue w/ the partition.
Next when it loads into the menu choose an option so the program is slected. I select "System Recovery" then at the next menu press FN+SHIFT+D
At the commpand prompt window that pops up test the keys w/ issues.
I am an HP employee.
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem. -
Re: I've lost Flash Card Function Keys
Ive lost the flash cards that used to drop down at the top of the screen. Tried a few different things including updating the drivers from the website.
At the minute, some of the function keys will work ok, ie brightness,lock - but the energy saving key and the wireless key no longer work.Hi Mafustokes,
Which drivers you have updated exactly?
The Flash Cards will be controlled from Value Added Package and you should update this tool. Dont know what notebook you have but you can get it here for example:
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers -
Using function keys (F1, F2, ...) without needing to hold down the fn key
By default on the Sprout, you need to hold down the "fn" key in order to access the real function keys (F1, F2, F3, ...) instead of the "actions" indicated by the icons on the keys. Normally, there's a BIOS option that lets you change this, so that the F1, F2, F3... function keys work without needing to hold down the "fn" key. E.g. as described in this article:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02035108&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
However, I don't see this BIOS option in the Sprout's BIOS, which looks quite different than the BIOS in that article.
Is there some way to change the "fn" key behaviour?
...Tim...Hi Streup,
Simple... On the S440 keyboard if you look at the top-left key.. Esc.. You should see a second label "FnLk" - Function Lock.
Press the Fn key and then Esc. The Fn Key will light up and now the Function Keys are activated.
Repeat the same to get the smart keys back.
Hope this helps
Mark -
Is there a cap lock function on the iPod touch?
Is there a cap lock function on the i-pod touch? I don't see a way to do it.
Hello mdgm,
First ensure that Caps Lock is enabled by going to *Settings > General > Keyboard > Enable Caps Lock*.
When this feature is enabled, you can then use Caps Lock by double-tapping the Shift key on the keyboard.
B-rock
Maybe you are looking for
-
Refreshing a single portlet rather than the whole portal page
Ok, here's my situation. I have two pdk portlets on my portal that communicate through page parameters. Portlet A has a bunch of search fields, a customer drop-down list, parts drop-down list, division, etc. Portlet B takes those parameters, queries
-
Hi Gurus, I have a nice scenario here in my project. We are working in project system and plant and maintenance modules in ECC 6.0. The PS netwrok order is created with either of the options-network or third party. Now the scenario for
-
hi, if table column is numc but in screen painter i define as char, can the number appear? i tested it cannot show the number. thanks
-
How to share ALL pictures in my photostream?
How to share ALL pictures in my photostream other than by manually marking each picture and every time the photostream gets updated? Thank you.
-
i get a runtime error trying to start itunes saing Microsoft Bisual C++ Runtime library Runtime error Program: C:\Program Files (x89)\itunes\itunes.exe R6034 An application has made an attempt to load the C runtime library incorrectly Please contact